SR500 User Manual_COVER
Contents
1. reference only Please check the actual model for specifications Unlocking Methods Keycards simply place the card close to the sensor Key the keyhole is in the lever of the front lever Types of Cards Master card First card to be encoded Regular cards Remaining 99 cards Modes of Operation Locked Mode Requires card to access Passage Mode No Card required SR500 INSTALLATION A A If door is not bored use the attached template on the back of this manual Follow instructions on the template If door is bored skip Step A and proceed to Step B Insert latch a into the door Use a phillips screwdriver to tighten the screws b being careful not to overtighten Insert the square spindle c through the door and latch a Connect the wires e x 2 Connect the two plates and tighten screws f into pipes d Tighten screws g and h Remove battery cover i and install 4 AA alkaline batteries Place strike plate k on door frame and tighten screws b2. PRIVEX Digital Lever Lock SKS SR500 SH500 Measurement mm inch r Ratio 1 1 4 3 16 7 S l FA 25 6 1 i i User Manual Installation Guide i IX e 26 1 12 en y tu t SR500 Series 2 SPECIFICATIONS BR ERTL BR FL 58 2 5 16 a 2 Dimensions Panels with levers 5 3 16 H x 5 1 2 W x 2 3 4 D Total Weight 3 31lbs Door Thickness 1 3 16 2 Adjustable Stainless Steel Latch Power Supply 4AA Alkaline Batteries included Digital Keypad Temperature 40 F 185 F Thank you for choosing the PRIVEX SR500 Digital Lever Lock Please keep this manual for future reference SR500 USER INSTRUCTIONS The SR500 is programmed to remain locked at all times requiring card access It can also be programmed to remain unlocked passage mode at all times allowing open access until the MASTER CARD is used The door locks automatically 1 5 seconds after the lever returns to the original horizontal position Please follow instructions below for programming Master Card Setup Press the button at the back for 5 seconds long beep and place the card to the sensor The first card to be encoded is the master card Regular Card Added Deleted 1 Press the button at the back for 3 seconds long beep to enter setup mode 2 Place the master card to the sensor 3 Place the Regular Card to the sensor one by one to add long
3. beep to delete regular card repeat steps 1 2 and 3 short beep delete short beep Passage Mode Setup Blue light flashes during passage mode 1 Place the master card to the sensor 2 Press the button at the back one time to enter passage mode 3 To return to locked mode place the master card to the sensor twice _Cancel all cards at one time by using Master Card _ 1 Press the button at the back until one short beep then release the button 2 Place the master card to the sensor 3 Press the button at the back for 5 seconds until a long beep and a short beep sounds Factory Default Settings if Master Card is Lost 1 Remove one battery 2 Next while continuously pressing the button on the back reinstall the battery One beep during setup indicates successful reset Three beeps and red light during reset indicates operation failure Repeat steps 1 amp 2 above Low Battery Alert Normal operation accompanied with 5 beeps in a row Please change batteries Card memory function No need to re encode the cards after battery replacement Please use alkaline batteries only Care amp Maintenance To preserve the appearance of the product wipe down using a clean cloth Do not use alcohol or other chemical agents Product Overview Sensor Indicator light Pm Keyhole Cover Battery Pack Button Emergency override key A 3 keys provided per lock RFID keycards Ha 44 f The picture is for
Download Pdf Manuals
Related Search