Ovation™ ED-190WW User Manual Rev. 1
Contents
1. Lens Separate the reflector housing from the barrel assembly by unscrewing the barrel rotation Knobs 2 Use a Phillips screwdriver to remove the lens from its fixed cover if necessary 3 Clean the lens as described in Product Maintenance Take great care not to damage the LEDs and circuit board which will now be exposed N inside the reflector housing Always close the framing shutters when transporting or storing the product gt To remove the lens tube sold separately unscrew the beam focus knobs Follow any maintenance and cleaning instructions supplied with the lens tube OVATION ED 190WW User Manual Rev 1 15 v CHAUVET Technical Specifications 6 TECHNICAL SPECIFICATIONS Dimensions and Length Width Height Weight Weigh produci Sui 21 5 in 545 mm 15 in 380 mm 15 in 380 mm 16 4 lb 7 44 kg Note Dimensions in inches rounded to the nearest decimal digit Power Power Supply Type Range Voltage Selection Switchable 120 230 VAC 50 60 Hz 120 or 230 VAC Parameter 120 VAC 60 Hz 230 VAC 50 Hz Consumption 208 W 200 W Current 1 7A 0 9 A Power linking current 8 A 4 products 8 A 8 products products Fuse Breaker T 3 15 A 250 V T 3 15 A 250 V Power I O U S Canada Worldwide Power input connector Neutrik powerCON A Neutrik powerCON A Power output connector Neutrik powerCON B Neutrik powerCON B Power cord plug Edison U S Local plug Light Source Type Power Lifespan LED 10 W2. El Edition Notes Edition Notes Trademarks Copyright Notice Manual Use Document Printing Intended Audience Disclaimer Document Revision HAVI PROFESSIONAL The OVATION ED 190WW User Manual Rev 1 covers the description safety precautions installation programming operation and maintenance of the OVATION ED 190WW Chauvet released this edition of the OVATION ED 190WW User Manual in April 2015 CHAUVETO is a registered trademark of CHAUVET Sons Inc d b a CHAUVET or Chauvet The CHAUVET logo in its entirety including the CHAUVET name and the dotted triangle and all other trademarks in this manual pertaining to services products or marketing statements are owned or licensed by Chauvet Any other product names logos brands company names and other trademarks featured or referred to within this document are the property of their respective trademark holders Chauvet owns the content of this User Manual in its entirety including but not limited to pictures logos trademarks and resources Copyright 2015 Chauvet All rights reserved Electronically published by Chauvet in the United States of America Chauvet authorizes its customers to download and print this manual for professional information purposes only Chauvet expressly prohibits the usage copy storage distribution modification or printing of this manual or its content for any other purpose without written consent fr
3. If the power input cord that came with your product has no plug or if you need to change the Edison plug use the table below to wire the new plug Connection Wire U S Wire Europe Screw Color AC Live Yellow or Brass AC Neutra Sive AC Ground Green Yellow Green Yellow Green inki The OVATION ED 190WW supports power linking You can power link up to 4 products at Power Linking 120 V or up to 8 at 230 V This product comes with a power input cord Power linking cables are available from Chauvet for purchase Fuse 1 Disconnect this product from the power outlet Replacement 2 Using a Phillips head screwdriver unscrew the fuse holder cap from the housing 3 Remove the blown fuse and replace with another fuse of the same type and rating T 3 15 A 250 V 4 Screw the fuse holder cap back in place and reconnect power _ Make sure to disconnect the product s power cord before replacing a blown fuse Always replace the blown fuse with another of the same type and rating 6 OVATION ED 190WW User Manual Rev 1 We Setup DMX Linking You can link the OVATION ED 190WW to a DMX controller using a 3 or 5 pin DMX connection If using other DMX compatible products with the OVATION ED 190WW you can control each individually with a single DMX controller DMX The OVATION ED 190WW uses a 3 or 5 pin DMX data connection for the 1 2 and 3 Personalities chanel DMX personalities Refer to the Introduction chapter for a brief de
4. Under normal conditions this lifespan can be 90 000 to 100 000 hours If extending this lifespan is vital lower the operating temperature by improving the ventilation around the product and reducing the ambient temperature to an optimal operating range In addition limiting the overall projection intensity may also help to extend the LEDs lifespan OVATION ED 190WW User Manual Rev 1 2 INTRODUCTION Description The OVATION ED 190WW ellipsoidal spot is a high power LED based product that runs when connected directly to constant power and DMX or on any dimming power source Advanced onboard electronics automatically detect what type of power and data the product receives and it responds accordingly The OVATION M ED 190WW delivers white light with a warm color temperature and a flat field It also features standard beam shaping shutters a gobo effect slot and lens barrels that are interchangeable with other ERS products It performs as well as the original OVATION ED 190WW with the same output and dimming performance Features Warm white LED ERS style lighting product Operating modes 1 channel UNO dimmer control 2 channel DOS dimmer and fine dimmer control 3 channel STD P dimmer fine dimmer and strobe control Accessory slot for motorized gobo devices and iris unit 16 bit dimming resolution DMX mode for smooth fades Flat even field of light Comes with standard pattern slot for glass or steel patterns and soft focus d
5. 0 100 000U 009 No function 010U 099 Strobe slow to fast 100U 109 No function 110U 179 Lighting effect 180U 189 No function 190U 255 Random strobe 3 Strobe A OVATIONTMED 190WW User Manual Rev 1 Operation DMX Personality Set the DMX personality as follows Go to the SET main level Select the PERS programming level Select the desired personality UNO 1 channel DOS 2 channel or STD P 3 channel See the DMX Control section for the highest starting address you can select for each personality Make sure that the starting addresses on the various products do not overlap due to the new personality setting DMX Control DMX Control allows you to assign each product to a unique starting address on the DMX controller All products with the same starting address will respond in unison 1 2 3 4 f Select a DMX Personality Set the running mode Go to the RUN main level Select DMX Note For information on the SLAV option see Master Slave Mode Set the starting address Go to the ADDR main level Select the starting address D 001 D 512 The highest recommended starting address for each DMX mode is as follows DMX DMX DMX DMX DMX DMX Mode Address Mode Address Mode Address UNO 512 DOS 511 STD P 510 Loss of Signal Setting This setting controls how the product responds when the DMX signal is lost 1 2 3 4 Go to the SET main level Select the DERR programmin
6. SLAV Sets the mode to master slave RUN Sets the mode to dimmer control which turns off data input Automatically chooses between DMMR and DMX ADDR D 001 D 512 Sets the starting address OFF No dimmer DIMX Slow DIM4 to fast DIM1 dimmer speeds For best performance while using on a SET dimmer set this to DIMA OFF Nodimmer CURV Large CV3 to small CV1 dimmer curves For best performance while using on a CV3 dimmer set this to CV3 OVATION ED 190WW User Manual Rev 1 9 v CHAUVET Operation Menu Map Cont Main Level Programming Levels Description LIVE Balances LED cooling using fans and output power level STDO Maintains LED cooling by limiting output power level POWR Maintains LED cooling using fans allowing full power output SLCK se menu level access lock SET DOS gelects DMX personality Cont STD P BLAK Blacks out fixture upon loss of DMX Continues with last command upon loss of ARE DMX control REST Enter REST Resets fixture to factory defaults Passcode SELF No DMX data is sent in standalone operation MCON MAST Sends DMX data to other OVATIONTM ED 190WW during standalone operation DMX Values UNO Channel Function Value Percent Setting 1 Dimmer 0000 255 0 100 DOS Channel Function Value Percent Setting 1 Dimmer 0000 255 0 100 2 Dimmer Fine 0000 255 0 100 STD P Channel Function Value Percent Setting 1 Dimmer 0000 255 o 100 2 Dimmer Fine 0000 255
7. in order to access the SET programming A levels the product will prompt you to enter the passcode Enter the passcode as described in Passcode A OVATION ED 190WW User Manual Rev 1 y Ul I Operation Reset To reset the OVATION ED 190WW to the factory default settings follow the instructions below 1 Goto the SET main level 2 Select the REST programming level and then the display becomes blank 3 Enter the passcode as described in Passcode After successfully entering the passcode REST blinks on the display during the reset process 4 OK appears on the display when finished Performance Power The OVATION ED 190WW offers three power output options during the cooling of the i product s LEDs SUIPHUSpUORS 1 Goto the SET main level 2 Select the PERF programming level 3 Select from the following options Select LIVE to cool the LEDs by balancing the use of the fan and the power output level Select STDO to cool the LEDs by maintaining the use of the fan and limiting the power output level Select POWR to cool the LEDs by maintaining the use of the fan and allowing full power output Manual Beam Focus The OVATION ED 190WW has a manual focus which is adjusted as follows Control 1 Locate the beam focus knobs at the top and bottom of the barrel assembly 2 Loosen the knobs by turning them counter clockwise 3 Slide the lens tube forward or backward until you achieve the desired focus or beam edge 4 Tighten t
8. LT DET 2 Sale INGO LS Sd UO dr ade LO Econo toute idee ocu uaa Lo esce bI deans ges LO pace erate oi ocio 2 ES e cim 2 MOUNTING ANG RIGGING aid 2 iol siad ANGANINNO censes e 2 o E Trece PS 2 Expected LED LileSp a RH c 2 A A TET ET TOT sate tidy snes Quan wut TD IET 3 DOS CMU OM te ROO E 3 FOS aot ecu I c CCP xL EE 3 E A PP o ere ER 3 A no nn MEM IN MU M dM MEM IDA LIEU Ere 4 DIMENSIONS a e 5 ETE ee S 6 AO ol TM 6 AGIPIUO c cy cca ae ese a E ie e DM IM D Mi DU 6 mel MEMINI 6 PUSS IRE DIACE INEM t M 6 IPS el ING ER T EEUU NOS ERE TEOREHEERUE 7 PIA CL SONICS veces o cIEU cel cu A cA I ce Ed Dac CU seaecae oases 7 Mastevola ve ConnestlViBy ases usi adii tussi i een teen E e de tesis nea 7 DIME ModS aig LT TR 7 MOUNINO ee ERR EQ UM 8 DEn Ol me n H 8 miei eje M DT ENE EN A ete C rp e dl e WE 8 OVATION ED 190WW User Manual Rev 1 i Table of Contents Ln TET A OODCTAUOMN e 9 Solis MA a a E a 9 Glo aide Seve anini a a a a a a a 9 Pror e TNR 9 MAUI ETE TT EET E RUNS 9 Menut Map CORT RUNE T RP TM 10 DMX A mutuae LM DIEM LEE UE I E 10 DMA Personally eme T nH J 11 DMX CONTON IEEE 11 LOSS Of SIQMal A 11 PUAN OG OVAL ON e E A coi 11 Dim
9. OVATION ED 190WW User Manual Rev 1 Tf 4 OPERATION Control Panel Button Function Description MENU Exits from the current menu or function ENTER Enables the currently displayed menu or sets the currently selected value in to the current function lt UP gt Navigates upward through the menu list or increases the numeric value when in a function DOWN Navigates downward through the menu list or decreases the numeric value when in a function Control vou can set the starting address of the OVATION M ED 190WW in the 001 512 DMX range Options This enables control of up to 170 products in the 3 channel STD P personality Programming Refer to the Menu Map to understand the menu options The menu map shows the main level and a variable number of programming levels for each option To go to the desired main level press MENU repeatedly until the option shows on the display Press ENTER to select This will take you to the first programming level for that option To select an option or value within the current programming level press UP or DOWN until the option shows on the display Press lt ENTER gt to select In this case if there is another programming level you will see that first option or you will see the selected value Press MENU repeatedly to exit to the previous main level Menu Map Main Level Programming Levels Description DIM D 000 D 100 Local control of output MX etsthe mode to DMX control
10. controlled using a regular dimmer When in SENS mode advanced onboard electronics automatically detect what type of power and data the product receives and it responds accordingly This is the factory default setting When in DMX mode the product runs only on constant power and is controlled solely on DMX The product will not respond to dimmer control in this mode When in DMMR mode DMX control is turned off Intensity is controlled using a dimmer In this mode the product reacts exactly like an incandescent product For the best performance while running on dimmers use the settings listed below Go to the SET main level Select the DIMX programming level Select DIMA Go back to SET main level Select the CURV programming level select CV3 pee OVATION ED 190WW User Manual Rev 1 7 Setup Mounting Orientation Rigging Procedure HAVYET PROFESSIONAL Before mounting this product read and follow the Safety Notes For our CHAUVET Professional line of mounting clamps go to http trusst com products Always mount this product in a safe position and make sure there is adequate room for ventilation configuration and maintenance Chauvet recommends using the following general guidelines when mounting this product When selecting an installation location consider easy access to this product for operation programming adjustments and routine maintenance Make sure to mount this product away fr
11. 100 000 hours Color Quantity Current Warm White 19 2 8A Photometrics Parameter 192 26 36 50 15 30 Lens 25 50 Lens Lens Lens Lens Lens Illuminance O 5 m 4 380 2 743 1 578 624 8 810 2 351 3 616 1 090 Ix Ix Ix Ix Ix Ix Ix Ix Lumens 5 274 6 025 6 322 60 349 N A N A N A N A Beam angle 16 22 9T 48 14 28 18 30 Field angle 22 28 36 56 15 29 20 48 Thermal Max External Temperature Cooling System 113 F 45 C Fan Assisted Convection DMX I O Connectors Connector Type Channel Range 3 and 5 pin XLR Sockets 1 20r3 Ordering Product Name Item Code UPC Number OVATION ED 190WW 01120960 781462213084 ROHS UL 1573 CSA C22 2 No 166 E C US 113093 OVATION ED 190WW User Manual Rev 1 Returns You must send the product prepaid in the original box and with the original packing and accessories Chauvet will not issue call tags Call Chauvet and request a Return Merchandise Authorization RMA number before shipping the product Be prepared to provide the model number serial number and a brief description of the cause s for the return Clearly label the package with an RMA number Chauvet will refuse any product returned without an RMA number DO NOT write the RMA number directly on the box Instead write it on a properly affixed label Once you have received the RMA number include the following information on a piece of paper inside the box Your name Your address Your phone number The RMA n
12. 97 Outside the U S United Kingdom Ireland Mexico or Benelux contact the dealer of record Follow their instructions to request support or to return a product Visit our website for contact details OVATION ED 190WW User Manual Rev 1
13. door Use Master Slave DMX Replaceable Fuse User Serviceable X Read all the following Safety Notes before working with this product These notes include important information about the installation usage and maintenance of this product This product contains no user serviceable parts Any reference to servicing in this User Manual will only apply to properly trained Chauvet certified technicians Do not open the housing or attempt any repairs All applicable local codes and regulations apply to proper installation of this product Avoid direct eye exposure to the light source while the product is on Always disconnect this product from its power source before servicing Always connect this product to a grounded circuit to avoid the risk of electrocution Do not touch this product s housing during operation because it may be very hot This product is for indoor use only To prevent risk of fire or shock do not expose this product to rain or moisture IP20 CAUTION When transferring product from extreme temperature environments e g cold truck to warm humid ballroom condensation may form on the internal electronics of the product To avoid causing a failure allow product to fully acclimate to the surrounding environment before connecting it to power Mount this product in a location with adequate ventilation at least 20 in 50 cm from adjacent surfaces Make sure there are no flammable materials close to this product
14. e TT VIS Ol GO ase fata cas ta diodo aoa 12 Dinner DOS RT T rcr 12 BY ga SURE IR NT TOT 12 Control Panel EDO kratos 12 mee M P 12 Ment Access LOCK acs mE 12 PACS E cies RR TT 13 Performance Power Output ODLOFIS aaa 13 Manual Beam FOCUS GC eniro RR T 13 ROrAUNO Ine Barrel A 13 Master lave MOE tice atria te tonchsatil racers TTE 14 A secte pcs ate i detis ac agate a ecco eset aaa cut loto oon ace cedes LIES ES MEE 14 Drob ndds A ici tome ICM EI MM M T 14 5 Technica IRTOMM AUlON ee TEES 15 miedo WORT 15 Cleaning the Reflector Housing Lensy ea e a A a E A 15 6 Techhical SOCCINCATIONS meme 16 RGLUTIS renie HR ET 17 Contac US eM 18 ii OVATION ED 190WW User Manual Rev 1 vee Before You Begin 1 BEFORE YOU BEGIN What Is OVATION ED 190WW Included Neutrik amp powerCON power cord Warranty Card Quick Reference Guide Claims Carefully unpack the product immediately and check the box to make sure all the parts are in the package and are in good condition If the box or the contents the product and included accessories appear damaged from shipping or show signs of mishandling notify the carrier immediately not Chauvet Failure to report damage to the carrier immediately may invalidate your clai
15. g level Select BLAK to turn off the LEDs when the signal is lost oelect SAVE to use the last command programmed when the signal is lost Dimmer Control The OVATION ED 190WW may be plugged into and controlled using a regular dimmer or by being plugged into constant power and using DMX control By default the product is set to SENS which automatically senses the type of power control being used and sets the product to react accordingly The product may also be set to DMMR mode which turns off the DMX control and only allows exclusive control of the product via the dimmer 1 Go to the RUN main level 2 Select the DMMR X When SENS and DMMR modes are active the only control panel button that will work will be the ENTER button which will allow you to change modes OVATION ED 190WW User Manual Rev AA v CHAUVET Operation Dimmer Menu To adjust the light output of the OVATION ED 190WW select the dimmer setting as 1 Goto the DIM main level 2 Select the desired dimmer setting D 000 D 100 0 100 light output Dimmer Speeds Select the dimmer speed of the OVATION ED 190WW by selecting the DIMX programming level 1 Goto the SET main level 2 Select the DIMX programming level 3 Select a dimmer speed DIM1 DIMA fast to slow or OFF linear output When selecting DIM1 DIM4 the output will correspond to the dimmer curve option selected under the dimmer curves programming level CURV Dimme
16. gobo accessories be sure the items are compatible with the OVATION ED 190WW OVATION ED 190WW User Manual Rev 1 5 TECHNICAL INFORMATION Product To maintain optimum performance and minimize wear you should clean this product frequently Usage and environment are contributing factors in determining the cleaning frequency Maintenance As a rule clean this product at least twice a month Dust build up reduces light output performance and can cause overheating This can lead to reduced light source life and increased mechanical wear To clean your product 1 Unplug the product from power 2 Wait until the product is at room temperature 3 Use a vacuum or dry compressed air and a soft brush to remove dust collected on the external vents 4 Clean all external surfaces with a mild solution of non ammonia glass cleaner or isopropyl alcohol 5 Apply the solution directly to a soft lint free cotton cloth or a lens cleaning tissue 6 Wipe any dirt or grime to the outside edges of the lens surface 7 Gently polish the lens surfaces until they are free of haze and lint D Always dry the external surfaces thoroughly and carefully after cleaning them Framing Shutter Beam Focus x 4 Knobs Barrel Rotation Lens Tube sold separately dy Barrel Reflector Assembly Housing Cleaning the The lens inside the reflector housing may need periodic cleaning To gain access to this lens do Reflector Housing e following
17. he knobs by turning them clockwise which lock the lens tube s position Rotating the Barrel The OVATION ED 190WW allows manual rotation of the barrel assembly as follows Assembly 1 Locate the barrel rotation knobs at the top and bottom of the reflector housing 2 Loosen the knobs by turning them counter clockwise Note Do not remove the knobs 3 Rotate the barrel to the desired position up to 25 in either direction from the centered position 4 Tighten the knobs by turning them clockwise which lock the barrel s position Make sure the barrel assembly is oriented with the pattern holder and drop in iris l slots at the top of the product OVATION ED 190WW User Manual Rev 1 13 Operation Master Slave Mode Gobo Slot Drop In Iris Slot Drop In Iris Gobo Slot Location Diagram HAVI PROFESSIONAL The Master Slave mode allows a single OVATION ED 190WW the master to control the actions of one or more OVATION ED 190WW products the slaves without the need of a DMX controller to control the slaves The master will be set to operate in Master mode MAST while the slaves will be set to operate in Slave mode SLAV Once set and connected the slaves will operate in unison with the master Configure the products as indicated below The Slaves 1 Goto the RUN main level 2 Select SLAV 3 Connect the DMX input of the first slave to the DMX output of the master 4 Connect the DMX input of t
18. he subsequent slaves to the DMX output of the previous slave 5 Finish setting and connecting all the slaves The Master 1 Goto the SET main level 2 Select the MCON programming level 3 Select MAST Note If you select SELF no DMX signals are sent to the slaves 4 Make the master the first product in the DMX daisy chain 5 Control the master using the DMX controller and the slaves will operate in unison gt Do not connect a DMX controller to the products configured for slave operation 1 The DMX controller may interfere with signals from the master The OVATION ED 190WW has a gobo slot which holds either a standard A or B size gobo holder sold separately Insert the gobo holder into the gobo slot The OVATION ED 190WW has a drop in iris which holds either a drop in iris or a motorized pattern device each sold separately 1 Loosen the thumb screws on the slot cover Note Do not remove the screws 2 Slide the cover forward 3 Insert the gobo holder iris or motorized pattern device Note Make sure the iris handle extends upward from the slot 4 Slide the cover back Make sure the iris handle moves freely 5 Tighten the thumb screws to secure the cover Cover Screws Gobo Slot Gobo Holder NS TT Iris Handle Drop in Iris Slot Cover Sample Drop in Iris When not using the iris gobo slot replace and secure the slot cover to prevent light leakage during operation When obtaining any optional iris
19. iffuser Virtually silent operation for use in any situation Works perfectly with industry standard lens tubes Simple and complex DMX channel profiles for programming versatility 3 and 5 pin XLR data input and output connectors Works perfectly on conventional dimmers or constant power with DMX Auto senses what kind of system conventional dimmers or constant power with DMX and responds appropriately Superior low end dimming whether using dimmers or constant power Perfect product for the retrofit market utilizes existing infrastructure flawlessly Lens Tube The following lens tubes are available for purchase 19 w Gel frame 6 25 in 159 mm accessories 26 w Gel frame 6 25 in 159 mm accessories 36 w Gel frame 6 25 in 159 mm accessories 50 w Gel frame 6 25 in 159 mm accessories 15 30 w Gel frame 7 5 in 191 mm accessories 25 50 w Gel frame 7 5 in 191 mm accessories N Do not operate the OVATION ED 190WW without a lens tube installed OVATION ED 190WW User Manual Rev 1 3s Introduction LINDO TEI Overview E Pattern Holder Slot Framing E e UE A Hou Shutter x 4 SIze noider TOF zZ 5 In an L2371In patterns sold separately Beam Focus Barrel Drop in Knobs Rotation Iris Slot Knobs Gel Frame Holder FT Side View H LL IL T YA Y Reflector Barrel Lens Tube Housing Assembly sold separately Voltage Switch Handle Rear Vie
20. m In addition keep the box and contents for inspection For other issues such as missing components or parts damage not related to shipping or concealed damage file a claim with Chauvet within 7 days of delivery Manual Convention Meaning Conventions 1 512 A range of values in the text 50 60 A set of mutually exclusive values in the text SET A button on the product s control panel Settings A product function or a menu option MENU gt Settings A sequence of menu options 1 10 A range of menu values from which to choose in a menu Yes No A set of two mutually exclusive menu options in a menu ON A unique value to be entered or selected in a menu Symbols Symbols Meaning Critical installation configuration or operation information Failure to comply with this information may cause the product not to work damage third party equipment or cause harm to the operator Important installation or configuration information Failure to comply with this information may keep the product from working Useful information The term DMX used throughout this manual refers to the USITT DMX512 A digital data transmission protocol OVATION ED 190WW User Manual Rev 1 Me Before You Begin Product At A Glance Safety Notes A Personal Safety Mounting And Rigging Power And Wiring Operation Expected LED Lifespan Use on Dimmer Auto Programs P X Switchable Power Supply p 120 or 230 VAC P P p Out
21. om Chauvet For better results print this document in color on letter size paper 8 5 x 11 in double sided If using A4 paper 210 x 297 mm configure your printer to scale the content accordingly Any person in charge of installing operating and or maintaining this product should completely read through the guide that shipped with the product as well as this manual before installing operating or maintaining this product Chauvet believes that the information contained in this manual is accurate in all respects However Chauvet assumes no responsibility for any errors or omissions in this document Chauvet reserves the right to revise and make changes to the content of this document without obligation that Chauvet notify any person or company of such revision or changes This does not in any way constitute a commitment by Chauvet to make such changes Chauvet may issue a revision of this manual or a new edition to incorporate such changes The OVATION ED 190WW User Manual Rev 1 is the first edition of this manual Go to www chauvetprofessional com for the latest version Author Date D Couppe 4 1 15 Date 4 1 15 Editor A Leon OVATION ED 190WW User Manual Rev 1 Table of Contents UN SIS fes mer w G G C 1 Whal A m Renta ere een m Gate eee enero ee ee men eee nr me ere 1 SUCHBEREICH HE rm 1 Mantal CONVENIOS EO Nem 1 SA cH ccr 1 PrOdUCTATA al AUN Cagis sire E EOD
22. om any flammable material as indicated in the Safety Notes Never mount in places where rain high humidity extreme temperature changes or restricted ventilation may affect the product If hanging this product make sure that the mounting location can support the product s weight See the Technical Specifications for the weight bearing requirements of this product When hanging this product always secure to a fastening device using a safety cable For our CHAUVETO Professional line of safety cables go to http trusst com products The OVATION ED 190WW comes with a hanging mounting yoke to which you can attach mounting clamps The yoke has 13 mm holes which are appropriate for this purpose You must supply your own mounting clamps so be sure the clamps are capable of supporting the weight of this product Use atleast one mounting point per product where necessary Mounting Clamp Hanging Mounting Yoke JU HM oey Aon JC Alternative Yoke ENSO HH E Wh Attachment m Mounting Diagram Sf E Bracket Safety Cable Adjustment Hand Shank e i ZAS B AT PS T Secure the safety WO 0 i INS cable using the PIT E Il passageway on the a E Li y pH top of the product T gt Su Overhead Mounting Alternate Short Mounting When using only one mounting clamp be sure to use a clamp with a captive bolt to prevent accidental loosening 35
23. r Curves Select the dimmer curve of the OVATION ED 190WW by selecting the CURV programming level These options simulate the dimmer curve of an incandescent lighting product 1 Goto the SET main level 2 Select the CURV programming level 3 Select a dimmer curve CV1 CV3 small to large or OFF linear output gt When selecting DIM1 DIM4 the output will correspond to the dimmer curve option selected under the dimmer curves programming level CURV Control Panel Lock This setting enables you to activate or deactivate the control panel lock which keeps non authorized personnel from changing the product s settings 1 Goto the KEY main level 2 Select either ON activate or OFF deactivate gt When the control panel lock is activated after 30 seconds of control panel inactivity or after turning on the product the product will prompt you to enter the passcode Passcode After being prompted to enter the passcode Press UP DOWN lt UP gt DOWN ENTER Note Asterisks appear on the display when entering the passcode Menu Access Lock lhis setting enables you to activate or deactivate the menu access lock Activating the menu access lock prevents non authorized personnel from making any changes to the programming levels under the SET main level 1 Goto the SET main level 2 Goto the SLCK programming level 3 Select either ON activate or OFF deactivate When the menu access lock is activated
24. scription of each DMX personality Refer to the Operation chapter to learn how to configure the OVATION ED 190WW to work in these personalities The DMX Values section provides you with detailed information regarding the DMX personalities y If you are not familiar with or need more information about DMX standards Master Slave connectivity or the DMX cables needed to link this product to a DMX controller download the DMX Primer from the Chauvet website http www chauvetlighting com download Master Slave The Master Slave mode allows a single OVATION ED 190WW the master to control the Connectivity actions of one or more OVATION ED 190WW products the slaves without the need of a DMX controller to control the slaves Once set and connected the slaves will operate in unison with the master For instructions on connecting and configuring this product see Master Slave Mode 0 DO NOT connect a DMX controller to products operating in Master Slave mode The DMX controller signals may interfere with the signals from the master The Operation chapter of this manual provides detailed instructions on how to configure the master and slaves If you are not familiar with or need more information about DMX standards or the DMX cables needed to link this product to a DMX controller download the DMX Primer from the Chauvet website http www chauvetlighting com download Dimmer Modes The OVATION ED 190WW may be plugged into and
25. umber A brief description of the problem s Be sure to pack the product properly Any shipping damage resulting from inadequate packaging will be the customers responsibility FedEx packing or double boxing is recommended 1 Chauvet reserves the right to use its own discretion to repair or replace returned product s OVATION ED 190WW User Manual Rev 1 17 User Manual CONTACT Us WORLD HEADQUARTERS Chauvet General Information Technical Support Address 5200 NW 108th Avenue Voice 954 577 4455 Press 4 Sunrise FL 33351 Fax 954 756 8015 Voice 954 577 4455 Email tech chauvetlighting com Fax 954 929 5560 Toll free 800 762 1084 World Wide Web www chauvetlighting com UNITED KINGDOM AND IRELAND Chauvet Europe Ltd General Information Technical Support Address Unit 1C Email uktechOchauvetlighting com Brookhill Road Industrial Estate Pinxton Nottingham UK World Wide Web www chauvetlighting co uk NG16 6NT Voice 44 0 1773 511115 Fax 44 0 1773 511110 MEXICO Chauvet Mexico General Information Technical Support Address Av Santa Ana 30 Email servicio chauvet com mx Parque Industrial Lerma Lerma Mexico C P 52000 World Wide Web www chauvet com mx Voice 52 728 285 5000 CHAUVET EUROPE Chauvet Europe BVBA General Information Technical Support Address Stokstraat 18 Email Eutech chauvetlighting eu 9770 Kruishoutem Belgium World Wide Web www chauvetlighting eu Voice 4329 388 93
26. w Menu Buttons Fuse Holder Display powerCONO meee 3 and 5 pin DMX In powerCON i Y 3 and 5 pin DM X Out Output SS OVATION ED 190WW User Manual Rev 1 FESSIONAL Introduction Dimensions A Side View amp Ii RE ME x mm A pu 6 7 in 15 in j e M M 171 mm 8 7 In 380 mm p u 222 mm CON Y Y 6 25 in 6 9 in 159mm 174mm yy OVATION ED 190WW User Manual Rev 1 v CHAUVET Setup 3 SETUP AC Power This product has a switchable power supply that can work with an input voltage of 120 VAC 60 Hz or 230 VAC 50 Hz To determine the power requirements for each OVATION ED 190WW refer to the label affixed to the product You can also refer to the Technical Specifications chart in this manual The listed current rating indicates the maximum current draw during normal operation For more information you may download Sizing Circuit Breakers from the Chauvet website http www chauvetlighting com download Always connect this product to a protected circuit with an appropriate electrical A ground to avoid the risk of electrocution or fire To eliminate unnecessary wear and improve its lifespan during periods of non use completely disconnect the product from power via breaker or by unplugging it AC Plug The OVATION ED 190WW comes with a power input cord terminated with a Neutrik powerCONO A connector on one end and an Edison plug on the other end U S market
27. while it is operating When hanging this product always secure to a fastening device using a safety cable Use caution when loosening the barrel rotation knobs If these knobs become too loose the barrel assembly may inadvertently separate from the reflector housing Always make sure you are connecting this product to the proper voltage in accordance with the specifications in this manual or on the product s specification label To eliminate unnecessary wear and improve its lifespan during periods of non use completely disconnect the product from power via breaker or by unplugging it Never disconnect this product by pulling or tugging on the power cable Do not operate this product if you see damage on the housing lenses or cables Have the damaged parts replaced by an authorized technician at once Do not cover the ventilation slots when operating to avoid internal overheating The maximum ambient temperature is 113 F 45 C Do not operate this product at a higher temperature In case of a serious operating problem stop using this product immediately In the unlikely event that your Chauvet product may require service contact Chauvet Technical Support LEDs gradually decline in brightness over time mostly because of heat Packaged in clusters LEDs exhibit higher operating temperatures than in ideal single LED conditions For this reason using clustered LEDs at their fullest intensity significantly reduces the LEDs lifespan
Download Pdf Manuals
Related Search