PORTABLE POWER SUPPLY
Contents
1. PPS TECHNICAL DATA Power input Power output Dimensions Protection classification Ascender cable length Mains cable length PPS WITH CARRY CASE Total weight Case amp PPS Case dimensions Case protection classification DISTRIBUTOR LU ActSafe Systems AB T 46 31 65 56 60 s Sagb cksv gen 13 E info actsafe se ActSafe SE 43731 Lindome Sweden 2015 ActSafe Systems AB2. PPS User Manual Rev 1 2015 ENG MASTER Act PORTABLE POWER SUPPLY Disclaimer About ActSafe Safety messages and warnings Product safety System description Pre use inspection and connection General safety operating guidelines Set up Trouble shooting guide Performance Warranty terms Declaration of conformity Technical data DISCLAIMER This manual is intended for use with the ActSafe Portable Power Supply which is only to be used in combination with the ActSafe ACCII Power Ascender It must be read in conjunction with the existing ACCII manual ActSafe Systems AB our partners and subsidiaries disclaim any liability for damages injuries or death resulting from the use or misuse of an ActSafe Portable Power Supply As ActSafe Systems AB has no control over the use of this equipment the person using this equipment assumes all risk of damage injuries or death resulting from such use It is expressly understood and agreed by the buyer or any subsequent user of the ActSafe Portable Power Supply that ActSafe Systems AB and or the seller cannot be held liable or accountable for damages injuries or death resulting from the use of the ActSafe Portable Power Supply and makes no warranty either expressed or implied or otherwise beyond that expressed herein ActSafe Systems AB disclaims any liability in tort for damages or direct or consequential personal injuries or death resultin
3. een advised of the possibility of such damages The customer agrees that repair or replacement as applicable under the warranty services described herein are the sole and exclusive remedies with respect to any breach of the ActSafe s limited warranty set forth herein If any provisions of this limited warranty are held to be unenforceable or illegal the continuation of the other provisions will not be affected This warranty will also not affect the customers mandatory rights under applicable Swedish laws DECLARATION OF CONFORMITY EC DECLARATION OF CONFORMITY Machinery Directive 2006 42 EC Manufacturer ActSafe Systems AB Sagb cksv gen 13 437 31 Lindome Sweden Itis hereby is certified that the is made according to following product Description ID mark type DIRECTIVE 2006 42 EC ActSafe Power Supply for ACC Il DIRECTIVE 2004 108 EC Serial Number DIRECTIVE 2006 95 EC Harmonised standards EN 61000 6 2 2005 Notified body if any EN 61000 6 3 2007 Danish Technological Institute EN 60204 1 2006 Id No EN 60335 1 2012 0396 EEC type certificate TI 14 MD 0419 e e e ActSafe near fhamonked samdari Name Magnus Glans ActSafe Systems AB Sagb cksv gen 13 437 31 Lindome Sweden Job title T 46 31 65 56 60 Managing Director E _info actsale se Sigrialure UT SW Place and Date Lindome 2015 04 07 DANISH yas TECHNOLOGICAL ww IN SWEDEN INSTITUTE
4. g from a malfunction or from a defect in design manufacturing materials or workmanship whether caused by negligence on the part of ActSafe Systems AB or otherwise ActSafe expressly disclaims liability for errors or omissions in this information and materials This information may be subject to change without notification We are completely committed to our customers and do our utmost to deliver top quality products and service ABOUT ACTSAFE ActSafe is a pioneer in developing powered rope ascenders and have been delivering high performance equipment since 1997 ActSafe has a worldwide distribution network of dedicated experts selling our innovative products to a wide variety of users Our products have been successfully used for installing fireworks at the top of the Eiffel Tower hostage rescues from pirates at sea and providing essential logistical support in offshore wind turbines ActSafe products are redefining the possibilities for work in a vertical environment Today as leaders in our field we set the standard that others follow SAFETY MESSAGES AND WARNINGS This manual details information on features and safety However this manual cannot replace the need for training and experience The ActSafe Portable Power Supply must only be used by operators who have undergone the proper training Safety messages of extra importance are highlighted throughout this manual using the signals da
5. ned or repaired by a party not authorized by ActSafe The product is maintained and operated in ways other than as recommended by ActSafe The serial number stickers have been removed or tampered with Anon ActSafe certified product is added on to the product x Warranty Limitations The warranty is not transferable from one user customer to another The warranty does not extend to parts or products requiring replacement due to normal wear and tear corrosion rust stain etc Any service repair or replacement not within the scope of ActSafe s coverage shall be subject to the rates and terms of the ActSafe approved service center performing such service Except for the warranties set forth herein ActSafe disclaims all other warranties express or implied or statutory including but not limited to the implied warranties of merchantability or fitness for a particular purpose Any implied warranties that may be imposed by applicable law are limited to the duration of this limited warranty In no event shall ActSafe be liable for any incidental special or consequential damages consequential human injury or loss including but not limited to loss of business profits or use whether in an action in contract or tort or based on a warranty arising out of or in connection with the use or performance of the product or any ActSafe supplied accessories which accompanies the product even if ActSafe has b
6. nger caution recommendation and note CAUTION Not following instructions or training methods may result in INJURY or DAMAGE TO PROPERTY RECOMMENDATION Instructions and tips on how best to use the Power Supply Note Important information on the use of the equipment connected to the Power Supply PRODUCT SAFETY The ActSafe Portable Power Supply is only to be used in conjunction with the ACCII Power Ascender The Power Supply must not be used in any of the following circumstances For any use other than that for which it has been designed In an explosive environment In a wet environment If modified in any way by anyone other than ActSafe Systems After a free fall from any height greater than 1m onto a hard surface If subjected to misuse in any way as parts or components may have been damaged Do not Use the Power Supply to charge any batteries Open the Power Supply under any circumstances Use any parts that are not original supplied by ActSafe SYSTEM DESCRIPTION Securing carrying strap Air vent Machine Rating Label This Power Supply is supplied with a machine rating label attached to the housing This label must not be removed POWER SUPPLY May ONLY be connected to a grounded outlet INPUT 230V 50 60Hz 10A A Manu 2 Power output 220V Power cable Power o
7. onal regulations may require more frequent inspections SET UP The ActSafe Portable Power Supply should only be used in applications where the Ascender is rigged to an anchor and therefore remains in a fixed position where the Power Supply can easily be connected to a 220V socket The Power Supply must not be used connected to long power cables whilst moving the Ascender up and down the rope These illustrations are intended to be used only as an indication of the position of the Power Supply Please refer to the ACCII Manual for further details on the correct use of the ACCII Ascender Ly lt Q lt P Top rigged Bottom rigged Pulley system top rigged Problem No power to Power Supply red LED off Ascender is not working Power Supply LED is blinking Ascender is not working Power Supply LED is on TROUBLE SHOOTING GUIDE Probable cause Power Supply not plugged in socket Power circuit fuse blown Too high power consumption Power circuit fuse blown Short circuit Overheating due to prolonged lowering Overheating due to bad ventilation No power to Ascender Overheating of Ascender feel chassis If you need further assistance or are in any doubt please contact ActSafe Systems or an ActSafe approved distributor Remedy Check that the Power Supply is plugged in Unplug other devices from the power circuit Check for damage to cables or for water and or humidity in close pro
8. r maximum lifting speed of 25 m min for the ACCII Ascender Laboratory tests have shown that the overheat protection will be activated in the following circumstances Load Maximum distance before overheating ACC PPS Lifting Lowering 100 kg 400m 500 m 200 kg 100m 100m WARRANTY TERMS ActSafe Systems AB ActSafe guarantees The ActSafe Portable Power Supply product purchased to be free from defects resulting from the use of faulty parts or poor workmanship during its manufacture subject to terms of the limited warranty warranty given below The claim will have to be made within the warranty period i e one year from delivery unless otherwise agreed ActSafe will repair or if necessary in ActSafe s opinion replace any defective parts and correct any problems resulting from poor workmanship free of charge ActSafe reserves the right to use reconditioned parts with performance parameters equal to those of new parts in connection with any services performed under ActSafe s limited warranty x y x Claim under ActSafe s warranty Claims under ActSafe s warranty may be made only by those customers who have the original sales invoice The warranty does not apply if A damage or defect has occurred due to physical breakage electrical faults external to the product water penetration of the product abuse or events of force majeure The product is modified maintai
9. verheat indicator LED OUTPUT 48VDC 50A WEIGHT 8 kg RY Q ACC Power Supply cable PRE USE INSPECTION AND CONNECTION Pre use inspection Perform before every use a pre use check of the ActSafe Portable Power Supply 1 Check main supply cable and plug for damage If damaged contact your ActSafe distributor for repairs D Check Ascender connection cable for damage Shall be replaced if damaged Check housing of Power Supply for damage If damaged contact your ActSafe distributor for repairs Connecting Power Supply 1 Make sure the Power Supply is installed in a secure place 2 Connect the Power Supply cable between the Power Supply and Ascender 3 Connect the power cable to the socket and check if the led on the Power Supply switches on 4 Switch on the ACCII Ascender 5 You are ready to go GENERAL SAFETY OPERATING GUIDELINES Use only approved and inspected equipment Make sure you have a steady 220 V 50 60 Hz grounded power source that can deliver 10 A Do not connect the Power Supply in a wet environment risk of electric shock Do not cover the Power Supply while in use risk of overheating Secure the Power Supply when working at height Inspection intervals The ActSafe Portable Power Supply must be checked before and after every use and must be subject to at least one inspection per year Nati
10. ximity of all power connections Let Power Supply cool down until LED is steadily lit Perform lowering operations with more cooling intervals to prevent the Power Supply overheating Ensure air vent is not covered Ensure that outside temperature is not too high Disengage the emergency stop Check ACC Power Supply cable Let Ascender cool down and perform lifting with more frequent cooling intervals PERFORMANCE ActSafe Portable Power Supply The Power Supply is a nearly unlimited source of power that enables you to carry Out extensive lifting with ACCII Power Ascenders almost continuously without reliance on batteries The limits of this system will only be reached under extreme conditions Lowering high loads over long distances will cause the Power Supply to become hot and eventually switch itself off due to the in built overheating protection system This is indicated by the LED flashing once the Power Supply has cooled down the LED will revert to its normal on state and the Power Supply may be used again ACCII The nearly unlimited supply of power will have under extreme conditions an effect on the ACCII Ascender When lifting high loads over long distances the ACCII Ascender will become hot and may eventually switch itself off due to the in built overheating protection system The Ascender can be switched on when cooled down and may be used again Speed The Power Supply enables a highe
Download Pdf Manuals
Related Search