Home

Instructions

1. oe 2 EXPLANATION OF INSTRUCTION LABELS ON THE MACHINE Before putting into operation carefully read the user s manual While working use protective aids Careful sharp parts of the machine Protect fingers and toes against injury Danger while running down after being turned off While working use protective footwear Item A Watch out for objects deflected by the cutting blades I Make sure that no other person is present in the working radius Minimum safe distance is 6 m 10m Do not use the shear in the vicinity of cables or live electricity or telephone lines When working maintain a distance of at least 10 m from above ground live electric lines Do not work in the rain or in unfavourable climatic conditions Symbols on the charger unit E Protection Class Il Use the charger only in a dry room The charger is equipped with a safety transformer F Negative poles EN 7 3 MACHINE DESCRIPTION AND INCLUDED CONTENTS Machine description see attached illustration Machine body Lock switch for setting the height Swivel handle of the telescopic pole Handle lock switch Safety lock for fastening the telescopic pole Safety switch Accessory wheels Main power switch Fastening bolt Blade assembly for cutting grass 43 LED battery charge indicator Blade assembly for cutting shrubs Power supply slot Telescopic pole Opening for fastening the telescopic pole
2. Purpose of use Instructions for use Electrical safety 8 MAINTENANCE AND STORAGE ss ei ia 14 Maintenance Storage 9 TECHNICAL SPECIF CATON Sicario 15 10 DISPOSAL a 16 _EN gt 1 GENERAL SAFETY REGULATIONS Important safety notice Carefully unpack the product and take care not to throw away any part of the packaging before you find all the parts of the product Store the machine in a dry place out of reach of children Read all warnings and instructions Not following warnings or instructions may lead to injury by electrical shock a fire and or serious injuries Packaging The product is packed in a package that prevents damage during transport This package is a resource and so can be handed over for recycling Operating instructions Before you start working with the machine read the following safety and usage instructions Understand the operating elements and the correct use of the device Keep the user s manual in a safe place where it can be easily retrieved for future use Q Note If you hand over the machine to somebody else do so together with the user s manual Following the instructions in the included user s manual is a prerequisite for the proper use of the machine The user s manual also contains operating maintenance and repair instructions The manufacturer takes no responsibility for accidents or damages resulting from not following the instructions in this manual e amp Garden Performa
3. S FIELDMANN Home amp Garden Performance FZN 4001 A FZN 4002 AT _ ENIS Dsrirrcan een NAAA 1 17 A A ee ee 18 31 A e on A dca 32 45 A ehe 46 59 Ag o A rl 60 73 PYCCKUU o ibi 74 87 A E e E AE 88 101 1 Saum e amp Garden Performa Cordless Grass shear amp Hedge Trimmer USER S MANUAL Thank you for purchasing this cordless shear for trimming grass edges and shaping ornamental shrubs Before you start using it please carefully read this user s manual and save it for possible future use CONTENTS ILLUSTRATED ATTAGCGHMEN ans 1 GENERAL SAFETY Te CUMIN Sasse 5 Important safety notice Packaging Operating instructions 2 EXPLANATION OF INSTRUCTION LABELS ON THE MACHINE enen 6 3 MACHINE DESCRIPTION AND INCLUDED CONTENTS ass 7 Machine description Supplied contents 4 ASSEMBLY OF THE MACHINE sisas i n 7 Attaching and removing the wheel assembly Assembly and disassembly of the telescopic pole Ss PUTING INDOPERANGON sa ea 8 Operating the tool Working without the telescopic pole Working with the telescopic pole Function of the swivel head Charging the machine Turning on the machine Changing the blades Important safety instructions for chargers Important safety instructions for batteries 6 INSTRUCTIONS FOR PROPER USE Sais bal 12 7 OPERATING INSTRUCCION si il 12 Operation
4. for model FZN 4002 AT Supplied contents Carefully take the machine out of the packaging and check whether all the following parts are present Cordless shear with a blade assembly for cutting grass in a protective cover Blade assembly for cutting shrubs Wheels Telescopic pole Battery charger User s manual for model FZN 4002 AT If there are parts missing or they are damaged please contact the vendor from whom you bought the machine A ASSEMBLY OF THE MACHINE 1 Product is fully assembled Take off the protective plastic blade cover before use and store it so that it can be reused when the product is not being used 2 The battery must be recharged before use Follow the instructions for charging 3 If while cutting branches the blades jam IMMEDIATELY release the trigger switch and release the blocked tool If you continue to hold the trigger switch while the blades are jammed you will cause damage to the motor 4 IMPORTANT This is a power tool that is very easy and comfortable to use Please pay special attention to the position of the blades during work with this tool so that you avoid injury e amp Garden Performa Attaching and removing the wheel assembly see pic 2 Slide on the wheel frame on to the projection on the handle and tighten the fastening bolt To remove the wheel assembly loosen the fastening bolt and take the wheel frame off the handle A ATTENTION Be careful not to press the main
5. power socket before cleaning it Taking the battery out of the charger does not lower this risk Never attempt to connect two chargers to one another DO NOT PLACE or use the tool in places where the temperature may reach or exceed 40 C places in a garage or metal buildings in the summer period The charger is designed to be used with a standard domestic power voltage 230 V Do not attempt to use any other power voltage Important safety instructions for batteries S l BE The battery is fully charged on delivery First read the safety instructions below and follow the instruction and charging procedures CAREFULLY READ ALL INSTRUCTIONS AND STORE THEM FOR FUTURE USE Do not burn the battery even if it is seriousiy damaged or completely worn out The battery could explode in the fire During demanding work or at high temperatures there may be small leaks of fluid from the battery cells In this case it is not a defect However if the external seal is breached and the fluid comes in contact with your skin do the following Quickly wash yourself with soap and water Neutralise the affected area with a weak acid such as lemon juice or vinegar If the battery fluid gets into your eyes flush out your eyes at least for several minutes with clean water and immediately seek medical treatment information for doctors the fluid is a 25 35 potassium hydroxide solution Do not bridge the cathode and the anode battery cont
6. acts with metal objects This could short circuit the battery which could destroy the battery or cause burns or a fire Charge the battery only in the charger supplied with this product NOTE This tool uses a Li Ion type battery which does not self discharge and does not have a memory effect e amp Garden Performa 6 INSTRUCTIONS FOR PROPER USE 1 Prevent children and animals access to the work area 2 Turn on the motor only in such a situation where your hands and legs are not in the vicity of the blades 3 Use only spare parts and accessories recommended by the manufacturer 4 If the tool and battery are not being used they should be stored independently in a dry higher and lockable location out of the reach of children Make sure that it is not possible for the battery contacts to be shorted by metal objects such as bolts nails etc 5 Do not apply excessive pressure on the tool during work The tool will perform the work better and more safely if it is used for the purposes for which it was designed 6 Perform meticulous maintenance of the tool Maintain the cutting mechanism sharp and clean to ensure better and safer operation Follow the instructions for lubrication and replacement of accessories 7 Prevent the situation where the tool is turned on accidentally Do not carry the tool with the finger on the main trigger switch 7 OPERATING INSTRUCTIONS Operation This product must not be used by childr
7. anufacturer s instructions Turn on the charged machine using the On Off switch pic 1 no 5 Operation will be shown on the LED display pic 1 no 1 Turn off the machine by releasing the switch the chuck will stop turning Changing the blades see pic 12 14 A ATTENTION Do not use the start switch before attaching or removing the blades Risk of injury The blades can be changed easily and quickly without the use of other tools 1 If you wish to change the blades you must first remove cover A Follow the steps shown in the illustration above Hold the tool using one hand as shown on the illustration above Slide out the clip B with your thumb and index finger of your other hand upwards Firmly hold the cover and pull it backwards Remove the cover in the upward direction 2 Remove the blades and attach new blades A ATTENTION Do not use the start switch before attaching the blade covers Risk of injury 1 To attach the cover follow the steps shown on the illustration below Attach the blade cover so that the two marks are aligned as shown in the top illustration Push the blade cover forwards until it is secured by the clips in the correct position Important safety instructions for chargers Read all instructions and warnings located on the charger battery and tool before using the charger DANGER The charger clamps have 230V Do not probe with conductive items Danger of serious or fatal injury by ele
8. ch which turns off the socket when the light is turned off e amp Garden Performa QEN place the charger and battery in a location where the temperature is in the range of approximately 18 24 C if problems with charging persist have the charger and tool repaired at an authorised service centre or the vendor The battery should be charged as soon as it stops delivering sufficient power for work which was performed easily with a fully charged battery DO NOT CONTINUE using the tool in these conditions Follow the provided procedure for charging Under certain conditions with the charger connected to the mains the exposed charging contacts inside the charger may be short circuited by foreign objects No conductive materials such as steel wool aluminium foil or other metal items may enter the charger opening Always disconnect the charger from the mains power socket if there is no battery located in the charger Before cleaning the charger always disconnect it from the mains power socket Do no submerge the charger in water or any other liquid WARNING Take care that no liquid enters the charger This could cause an injury by electrical shock If you want to make it easier for the battery to cool down after being used with the tool do not place the charger or the tool in warm places such as metal buildings or open trailers Turning on the machine A ATTENTION Press or release the start switch carefully according to the m
9. ctrical shock EN Ik The charger and battery are specifically designed to work together DO NOT ATTEMPT to charge the battery in a different charger than the charger specified in this user s manual Do not expose the charger to rain or snow This charger is not designed for any use other than charging rechargeable batteries Any other use may lead to a fire or serious or fatal injury by electrical shock In order to limit the risk of damaging the power plug or cable always disconnect by pulling on the plug and not the cable Make sure that the cable is not placed in such a way that it is stepped on tripped over or that it is not damaged or otherwise exposed to stress The charger is ventilated by slot openings located in the top and bottom part of the charger Do not place any items on the top part of the charger and do not place the charger on such surfaces which could block these openings which would lead to excessive temperatures inside the charger Keep the charger at a sufficient distance from sources of heat Do not use the charger if it has been impacted by something or if it has fallen or been damaged in any other way Do not disassemble the charger Have the charger maintained or repaired at an authorised service centre or the vendor Incorrectly performed assembly may lead to a fire or serious or fatal injury by electrical shock In order to limit the risk of injury by electrical shock always disconnect the charger from the mains
10. en and persons with physical or mental impairments or by inexperienced persons unless properly trained or schooled in the safe use of the product or unless they have been properly supervised by a qualified person who will be responsible for their safety Use extra care if the product is used near children Always keep the appliance out of reach of children Children must be supervised to ensure that they do not play with the product Never allow children or persons who do not know the contents of this user s manual to work with the device Local regulations may set the minimum age of the user The user is responsible for damages caused to third parties in the machine s working area as a result of its use Do not use the machine if your are tired under the influence of alcohol or narcotics If necessary use personal protection aids gloves work footwear eye protection respirators etc Secure loose clothing long hair or jewellery so that they cannot get caught by the moving parts of the machine sh 6 Purpose of use The cordless grass shear amp hedge trimmer is intended for use in private gardens Machines considered to be suitable for use in private gardens are such devices where the annual operation as a rule does not exceed 50 operating hours and which are predominantly used for the maintenance of lawn areas but not public facilities parks sports fields or in agriculture or forestry Do not use the product for purpo
11. ery 1 Charging procedure These chargers do not require any setup and are designed so that their use is as easy as possible Connect the charger to the tool Insert it into the charger opening on the handle Connect the charger power cord to a power socket A LED charging indicator will turn light up on the tool Now the LED charging indicator will be red This means that the battery is charging The LED diode will turn green after approximately 4 hours This means that the battery is fully charged Q Note The start safety lock and the start button on the tool do not function during the charging process 2 Important notes for charging You will achieve the longest operating lifetime and performance if the battery is charged at temperatures between 18 24 C Do not charge the battery at temperatures lower than 4 5 C or higher than 40 C This instruction is very important and prevents major damage to the battery While charging the charger and the battery may be warm to touch This is a normal event and does not indicate any problem Whenever possible use the charger at standard room temperature To prevent the charger from overheating do not cover the battery and do not charge in direct sunlight or in the vicinity of heat sources If the battery is not being properly charged connect a lamp or another device to the power socket to check the current in the socket check whether the socket is controlled via a light swit
12. o an authorised service centre or the vendor Tampering with the appliance during the warranty period may void the warranty The manufacturer is not responsible for damages caused by incorrect use of this product or its accessories Such damages include food spoilage injuries burns scalding fire etc Using accessories or attachments that are not recommended in this user s manual may increase the risk of injury Make sure that the correct battery for this tool is used Before connecting to the charger check that the surface of the tool and battery is clean and dry Make sure that the battery is charged using the correct charger which is recommended by the manufacturer Incorrect use may lead to a risk of injury by electrical shock overheating of the battery or leakage of battery fluid Have the tool repaired only by a qualified person This tool is manufactured in accordance with the demands of respective safety regulations Repairs should only be performed by qualified persons using original spare parts Otherwise the user will be placed in significant danger Disposal of batteries Ensure that the batteries are safely disposed of according to the manufacturer s instructions Electrical safety 5 The charger of the cordless grass shear hedge trimmer can be connected to any power plug preventing discharge that is installed according to norms in force The plug must be powered at 230 V 50 Hz Disconnect the charger if yo
13. or extended periods of time lubrication should be performed during work Storage S 5 Store the tool in a dry location at a sufficient distance from heat sources or dangerous vapours Do not place any other items on the machine __EN 9 TECHNICAL SPECIFICATIONS Battery 3 6 V 1300 mAh Battery type Idling speed 1 000 rpm Length of blade assembly for cutting 110 mm shrubs Width of blade assembly for cutting 80 mm grass Charging time 4 hours Weight 0 6 kg 1 0 kg with telescopic pole model FZN 4002 AT Charger Input charging voltage 230 V 50 Hz Output voltage 6 V direct current 500 mA Amendments to text and technical parameters are reserved Changes in the text design and technical specifications may change without prior notice and we reserve the right to make these changes e amp Garden Performa 10 DISPOSAL INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING MATERIALS Dispose of packaging material at a public waste disposal site DISPOSAL OF USED ELECTRICAL AND ELECTRONIC APPLIANCES The meaning of the symbol on the product its accessory or packaging indicates that this product shall not be treated as household waste Please dispose of this product at your applicable collection point for the recycling of electrical amp electronic equipment waste Alternatively in some states of the European Union or other European states BEE you may return your
14. products to your local retailer when buying an equivalent new product The correct disposal of this product will help save valuable natural resources and help in preventing the potential negative impact on the environment and human health which could be caused as a result of improper liquidation of waste Please ask your local authorities or the nearest waste collection centre for further details The improper disposal of this type of waste may fall subject to national regulations for fines For business entities in the European Union If you wish to dispose of an electrical or electronic device request the necessary information from your seller or supplier Disposal in other countries outside the European Union If you wish to dispose of this product request the necessary information about the correct disposal method from local government departments or from your seller This product meets all the basic EU regulation requirements thot relate to it Changes to the text design and technical specifications may occur without prior notice and we reserve the right to make these changes
15. s running you may release the safety switch ns WN MEN gt Function of the swivel head see pic 6 Firmly hold the handle Move the locking button upwards and then turn the tool s head to the desired position Release the locking button and check that the tool s head is properly secured in the new position Q Note The tool s head can be secured in five positions 90 0 90 180 Turned at an angle of 90 for vertical cutting of lawns see pic 7 10 Turned at an angle of 180 for cutting at heights see pic 8 Setting the height for cutting and trimming lawns see pic 9 Appropriate height for cutting lawns is 40 and 25mm Appropriate height for trimming lawns is 80 65 and 40mm Charging the machine see pic 11 If you wish to charge the battery connect the adapter to a power socket 230 V 50 Hz and insert the charger connector into the opening on the handle of the machine The red charging indicator light will turn on The battery may be charged for approximately 4 hours Make sure that you have read all the safety instructions before using the charger This product must not be repaired by the user There are no repairable parts inside the charger The charger must be repaired by an authorised service centre or organised by the vendor so as to prevent damaging the internal components Read all instructions contained in this user s manual in the section describing the charger before charging your tool s batt
16. ses other than those intended For safety reasons the machine must not be used as a drive engine for any other work tools and tool sets unless expressly permitted by the manufacturer __EN Ei Instructions for use 5 SRR E 5 S SESS S Eh Turn on and operate the machine as described in the user s manual carefully follow all instructions Before carrying out any kind of inspection maintenance or repairs disconnect the charger power cable from the mains power supply Use tools in good working condition for tasks for which they are designed Work only during good visibility or ensure sufficient artificial lighting Only store and use the product away from flammable or volatile materials and solutions Keep the product away from extreme temperatures direct sunlight and excessive humidity Do not use in a dusty environment Do not place the product near heaters open fires or other appliances or equipment that are sources of heat Do not spray the product with water or any other liquid Do not pour water or any other liquids into the appliance Do not submerge the appliance in water or any other liquid Never leave the appliance switched on without supervision Do not touch machine parts until they have come to a complete stop Allow the motor to cool down before storing the machine in a closed room Under no circumstances should you repair or alter the product yourself Entrust all repairs and adjustments of this product t
17. switch when attaching or removing the wheels This could cause serious injuries Assembly and disassembly of the telescopic pole see pic 3 Slide into the blade handle so that it is secured with the safety lock The safety switch and the main switch on the handle will not function if the telescopic pole is mounted on the tool To remove the telescopic pole press the safety lock and slide the swivel handle from the machine 9 PUTTING INTO OPERATION Operating the tool A ATTENTION Never remove or interfere with the function of the starting mechanism The start safety lock prevents your tool from being started accidentally Working without the telescopic pole 1 Press the release button 1 backwards and press switch 2 2 Release the release button 1 EX Note If while using this tool the LED indicator light 3 is red the battery is flat Immediately stop work and recharge the battery in the charger supplied with this tool Working with the telescopic pole The length of the telescopic pole is adjustable and can be adjusted to the height of the operator A ATTENTION Do not use the tool s main switch when adjusting the telescopic handle This could cause serious injuries Attach the telescopic pole Hold the pole with one hand and then loosen the locking bolt Set the handle to the desired height and secure the pole with the adjustment bolt Press in the safety lock and press the main switch After the machine i
18. u will not be using it for a long time if you are changing the tool or performing maintenance on the tool e amp Garden Performa 8 MAINTENANCE AND STORAGE Maintenance A ATTENTION Disconnect the charger if you will not be using it for a long time if you are changing S S Ss Eh the tool or performing maintenance on the tool Check whether the device is showing signs of wear If the charger is damaged cover conductors or connector immediately arrange their replacement at an authorised service centre or from the vendor Regular care for the machine will ensure not only a long lifetime and performance Before use always visually check for worn or damaged parts Replace damaged or worn parts To ensure that the machine always remains balanced always replace the entire set of the worn or damaged tools Worn or damaged machine parts may only be replaced at an authorised service centre or arranged by the vendor Before cleaning disconnect this product from the power source To clean the plastic parts of the product use a soft cloth dipped in lukewarm water Do not use aggressive cleaning products and solvents as this could damage the surface of the appliance Do not clean the machine under running water or submerge under water After changing the working tool check that the working tool is secured in its storage position After each use of the shear the blade must be cleaned and lubricated If the shear is used non stop f

Instructions

Contents

Download Pdf Manuals

Related Search

Related Contents