Vello CB-200 Bracket User Manual
Contents
1. SPEEDY BRACKET CAMERA ROTATING FLASH BRACKET Thank you for choosing the Vello Speedy Bracket The Speedy Bracket puts you in control of your lighting whether you re shooting horizontally or vertically and allows you to switch between the two orientations with just a quick flip of the camera Removable Accessory Shoe Please follow the instructions below to get the most out of your aunt Speedy Bracket and to prevent improper installation which may cause damage to your equipment Multiple Accessory Mounting Holes 1 4 20 Camera Speed AATE Mounting Knob Bracket Grip Rotating Camera Platform 1 4 20 Tripod Mounting Knob PREPARING YOUR SPEEDY BRACKET FOR MOUNTING Before mounting your camera for the first time you will need to attach the adhesive cork pad included To attach the cork pad make sure the camera platform is fingerprint oil and smudge free Peel the backing off the pad and press firmly into place making sure the pad s slots and holes are aligned with those on the platform MOUNTING THE CAMERA Place your camera on the platform and align your camera s mounting socket with the Speedy Bracket s camera mounting knob Tighten the knob until firmly connected MOUNTING THE FLASH The Speedy Bracket is equipped with an accessory shoe mount which can be used to mount your flash unit or TTL cord To mount your flash or TTL cord loosen the red knob on the accessory shoe inser2. espect to this limited warranty shall be limited solely to repair or replacement at the provider s discretion of any product that fails during normal use of this product in its intended manner and in its intended environment Inoperability of the product or part s shall be determined by the warranty provider If the product has been discontinued the warranty provider reserves the right to replace it with a model of equivalent quality and function This warranty does not cover damage or defect caused by misuse neglect accident alteration abuse improper installation or maintenance EXCEPT AS PROVIDED HEREIN THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE This warranty provides you with specific legal rights and you may also have additional rights that vary from state to state To obtain warranty coverage contact the Vello Customer Service Department to obtain a return merchandise authorization RMA number and return the defective product to Vello along with the RMA number and proof of purchase Shipment of the defective product is at the purchaser s own risk and expense For more information or to arrange service visit www vellogear com or call Customer Service at 212 594 2353 VELLO A Gradus Group Brand Product warranty provided by the Gradus Group www gradusgroup com VELLO is a regi
3. stered trademark of the Gradus Group 2014 Gradus Group LLC All Rights Reserved www vellogear com
4. t your flash or TTL cord s hot shoe foot and tighten the knob Tip to mount the Nikon SC 28 or SC 29 off camera shoe cords remove the cold shoe mount from the flash arm and use the included mounting screw to mount the cord to the bracket ADJUSTING THE TENSION The Speedy Bracket s rotation tension has been preset to accommodate most cameras However the use of heavier cameras may require additional tightening If necessary use a 3 8 socket wrench to adjust all four lock nuts 1 4 in successive 1 8 turns until the desired tension is achieved USING THE BRACKET FOR HORIZONTAL SHOOTING Grasp the grip on the Speedy Bracket with your left hand using your right hand to rotate the camera clockwise to the horizontal position Once in place you can use your camera s own grip to compose and shoot your photos USING THE BRACKET FOR VERTICAL SHOOTING Grasp the grip on the Speedy Bracket with your left hand using your right hand to rotate the camera counterclockwise to the vertical position Once in place you can use your camera s own grip to compose and shoot your photos One Year Limited Warranty This VELLO product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one 1 year from the original purchase date or thirty 30 days after replacement whichever occurs later The warranty provider s responsibility with r
Download Pdf Manuals
Related Search