iStir Quattro - Neuation.com
Contents
1. EUGETIor i Stir Quattro Four Position Electromagnetic Stirrer PRODUCT USER MANUAL CONTENTS 1 Product Description 2 Intended Use 3 Features 4 Technical Specifications 5 Maintenance amp Safety Instructions 6 Installation amp Operation 7 Warranty Statem 8 Product Disposal EEE A Nn 1 PRODUCT DESCRIPTION Congratulation You are using 4 position electromagnetic stirrer designed to give synchronous stirring Modern magnetic coil technology provides noiseless and consistent stirring It provides high IP protection class IP 65 with no moving parts attached to it Setting of speed and time with digital display showing real time speed For better mixing pulse mode is provided in which stirring bar can rotate clockwise amp anti clockwise for every 30 seconds 2 INTENDED USE This multi position electromagnetic stirrer is designed for use in chemical and pharma industry for mixing liquids 3 FEATURES 1 4 stirring position with synchronous amp consistent stirring 2 Flat surface with slim profile 3 Pulse function of 30 seconds for better mixing 4 Variable speed setting from 15 to 1200 RPM 5 Variable time setting from 1 minute to 99 minute amp infinite mode 6 Digital2. days from the date of purchase For your reference make a note of the serial number date of purchase and supplier here Serial No Purchase Date Supplier 10 8 PRODUCT DISPOSAL In case the product is to be disposed of the relevant legal regulations are to be observed Information on the disposal of electrical and electronic devices in the European Community The disposal of electrical devices is regulated within the European Community by national regulations based on EU Directive 2012 19 EU on waste electrical and electronic equipment WEEE According to these regulations any devices supplied after 13 06 05 in the business to business sphere to which this product is assigned may no longer be disposed off in municipal or domestic waste They are marked with the following symbol to indicate this As disposal regulations within the EU may vary from country to country please contact your supplier if necessary 11 Y DAS a U Neuation Technologies Pvt Ltd E ge O Plot no 16 Part of 22 GIDC Electronics Park SEZ A N Kolavada Road Sector 26 a 7 Gandhinagar Gujarat India ZU Ph PS PN J Fax 91 2764 248243 www neuation com q se info neuation com P a ol 24 Zp Z A A 4 E f ge r e sl ZA Zu ZU r r r pr g g J SY SY I SA AS Zn N ZO
3. ded magnetic stirring bar with beaker or flask in between Doing this can affect the magnetism of device Place device on a flat stable clean non slippery and fire proof surface The base plate must be clean and intact Do not try to mix liquid more then 400 ml with 25 mm magnetic stirring bar on a single stirring position lt may lead to improper mixing Wear your personal protective equipment in accordance with the hazardous category ofthe media to be processed Otherwise there is ariskfrom Splashing and evaporation of liquids Ejection of parts Release of toxic or combustible gases Do not lift or hold the device from the cable Do not use damaged beaker flask stirring bar or any other component for operation It may affect the efficiency of device Reduce the speed t f the medium splashes out of the vessel because speed is too high If the appliance is not running smoothly f the container moves on the base plate 6 MAINTENANCE amp SAFETY INSTRUCTIONS 10 The base plate may warm after continuous usage Do not touch the base plate immediately after operation AN 11 Process pathogenic materials only in closed vessel under a suitable extractor hood Do not operate the appliance in explosive atmospheres with hazardous substance or under water 12 Only use that liquid for mixing that will not react dangerously to the extra energy produced through AN processing This a
4. display for accurate setting of speed and time 6 Mixing capacity of 400 ml per position with 25mm magnetic stirring bar 7 Anti Skid pads 8 Water spill resistant designed as per IP 65 standard 9 Wear free drive with no moving parts 4 ACCESSORIES 4 set of stirrer bar PTFE coated 25 x 8mm high strength stir bar 5 TECHNICAL SPECIFICATIONS Number of Stirring positions 4 Stirred quantity Max Tested in H20 400 ml at 1200 RPM with 25mm stirring bar per stirring position Speed range 15 1200 rpm Time range 1 to 99 mins Auto direction change Pulse Mode Yes Auto direction change time interval 30 seconds Digital Display Yes Recommended Stirring Bar Length 25 mm Set up plate material Stainless Steel Set up Dimensions Lx W 385 x 122 mm Distance Between two stirring points Dimensions L x W x H 95mm 457 x 126 x 13 4 mm Weight 1 9 Kg Permissible ambient temperature 5 40 C Protection class according to DIN EN 60529 IP 65 Input voltage 100 240 VAC 50 60 Hz Output Voltage Power Consumption 9 VDC 13W 6 MAINTENANCE amp SAFETY INSTRUCTIONS Read the following safety instruction before using the electromagnetic stirrer for your as well as equipment safety 1 9 Wear protective gloves while cleaning the device Do not place any steel or magnetic material on the base plate except the recommen
5. f stirring at regular interval single press pulse button First set the required speed amp then single press the pulse button to start stirring process in pulse mode LED adjacent to pulse button will blink to indicate activation of pulse mode Pulse mode can also be time bound For time bound set speed and also time then single press the pulse button to start stirring in pulse mode Pulse stirring mode end when time goes to zero 0 7 Press the ON OFF button again to stop the ongoing operation as well as to switch OFF the electromagnetic stirrer 8 After every restart ON OFF stirrer will start operating at last run speed amp infinite time NOTE In case of slippage first turn OFF and turn ON again If slippage stilloccurs thenreduce the speed for efficient operation 7 WARRANTY STATEMENT This products is warranted to be free from defects in material and workmanship for a period of two 2 years from date of purchase Your product will be duly repaired upon prompt notification in compliance with the following conditions This warranty is valid only if the product is used for its intended purpose and within the guidelines specified in this instruction manual This warranty does not cover damage caused by accident neglect misuse improper service natural forces or other causes not arising from defects in original material or workmanship This warranty does not cover any incidental or consequential damages commercia
6. l loss or any other damages from the use of this product This warranty does not cover damage to paint or finish and defects or damages caused by physical and chemical abuse or normal wear and tear The warranty is invalidated by any non factory modification which will immediately terminate all liabilities on us for the products or damages caused by its use The buyer and its customer shall be responsible for the product or use of products as well as any supervision required for safety If requested the products must be returned to the distributor in well packed and insured manner and all shipping charges must be paid 7 WARRANTY STATEMENT Some states do not allow limitation on the length of implied warranties or the exclusion or limitation of incidental or consequential damages This warranty gives you specific legal rights This warranty is given expressly in lieu of all other warranties expressed or implied The purchaser agrees that there is no warranty of merchantability or of fitness for any intended purpose and that there are no other remedies or warranties expressed or implied which extend beyond the description on the face of the agreement This warranty is only applicable to the original purchaser All items returned for service should be set postage prepaid in the original packaging or other suitable carton added to avoid damage This warranty is valid only if the warranty is registered with the supplier within 30
7. lso applies to any extra energy produced in other ways For example Through light irradiation through surroundingtemperature etc 13 Abrasion of the dispersion equipment or the rotating accessories can get into medium you are working on 14 Chemical reaction of PTFE can occur when in contact with molten or dissolved alkaline earth metals as well as with fine partied powders of metals of the 2 and 3 group of the periodical system at temperatures above 300 400 C Only elementary fluorine chorine trifluoride and alkaline metals do attack PTFE halogen hydrocarbons have a reversible swelling effect 15 The temperature of the stirring media in the beaker and beaker itself should not be more than 45 C 16 The equipment will not restart both in case of mains T interruption and in the case of any fault or mechanical interruption Care should be taken based on the sample used for mixing 7 INSTALLATION amp OPERATION The electromagnetic stirrer is provided in the box Open the box then remove the packaging and gently place the device on the firm amp leveled surface Take care while unpacking amp do not pull the AC power adaptor as it is attached with the device The user manual should be kept with the device Please keep all packaging in safe storage for atleast two years for warranty purpose Below table shows the function of user interface buttons Buttons Buttons Name Function ON OFF Press button to turn ON B
8. restart the stirrer will start with the last run speed 7 INSTALLATION amp OPERATION TIME SETTING The default timer is set as infinite more when stirrer starts In order to settime Long press the PULSE TIME button to activate time mode By default the timer will be infinite and will be seen by t 32 in display Once activated single press increment or decrement button to increase or decrease time value by 1 minute on each press Once activated continuous press increment or decrement button to increase or decrease time value as faster pace After modifying wait for 3 blinks to set time Timer is countdown timer and it will take effect once it reaches set RPM Speed can be modify at any point of time The speed modified between ongoing time will not affect the time amp timer continuous to be countdown Speed and Time will display alternatively when speed reached to set RPM When timer goes to zero 0 the stirring stops The display will show t GO amp 0000ralternatively indicating time for stirring is over After any timely stirring operation press any button except the power button to start the stirring operation with last run speed and time Note Timer will be set to default infinite once restart 7 INSTALLATION amp OPERATION PULSE MODE In pulse mode the stirring direction will be reversed every 30 seconds Inorderto select the pulse mode amp to reverse the direction o
9. utton and turn OFF the unit Single press button to activate Pulse amp Time pulse mode LED blinks to indicate Mode Button Long press button to activate time mode t will show on display Increment Press button to increase Button speed time value Decrement Press button to decrease Button speed time value OG 7 INSTALLATION OPERATION Connect the AC power adaptor to the mains Fillthe beaker or vessel with the medium or liquids to be processed then place the magnetic stirring bar in the beaker flask or vessel Place the vessel or beaker on the center of the base plate Turn ON the electromagnetic stirrer by pressing ON OFF button 5 Set the speed at which the medium or liquids to be processed Minimum speed is 15 RPM and maximum speed is 1200 RPM Set the Time if it requires Minimum time is 1 minute amp Maximum time is 99 minutes By default time is always infinite SPEED SETTING Press increment amp decrement button to modify amp set speed value Single press increment or decrement button to increase or decrease the speed value by 50 RPM on each press Continuous press increment or decrement button to increase or decrease the speed value at faster pace Speed value is seen in the digital display and get set after 3 blinks At any point of time user can modify the speed using increment or decrement button On every
Download Pdf Manuals
Related Search