User manual EPS front derailleur
Contents
1. in the instruction sheet of the EPS Power Unit e The time indications reported herein are purely indicative and may vary conside rably in relation to the conditions of use and intensity of your activity significant factors include for instance professional training rain mud salt on streets in winter the weight of the cyclist etc Contact your mechanic to identify the best suited schedules for your features e Make sure that the derailleur is always properly adjusted the height of the derailleur so that the cage is at a distance of 1 5 3 mm from the larger chainring Fig 2 the outside side of the derailleur cage must be parallel with the larger chainring Fig 3 30 ENGLISH Campagnolo e Lubricate the joints in the front derailleur mechanism as normal with oil e Using poor quality or incorrect lubricant may damage the chain and cause excessive wear or damage to the system A damaged drive system can malfunction resulting in an accident personal injury or death e At the end of lubrication operations CAREFULLY degrease the braking surface and the brake shoes e Never wash your bicycle with pressurised water Pressurised water even from the nozzle of a garden hose can pass the seals and enter inside your Campagnolo compo nents causing irreparable damage Wash your bicycle and Campagnolo components by gently cleaning them with water and neutral soap Dry carefully with a soft cloth Never use abrasive or2. EPS drive train as indicated in the instruction sheet of the EPS Power Unit Loosen the screw using a 5 mm Allen wrench A Fig 1 and remove the screw together with the washers then secure the derailleur on the frame s braze on coupling e Adjust the height of the derailleur so that the cage is at a distance of 1 5 3 mm from the larger chainring Fig 2 e Align the derailleur the inner side of the derailleur cage must be parallel with the chainring Fig 3 e Using a torque wrench fasten the tightening bolt A Fig 1 to the frame torquing to the following values 7 Nm 62 in lbs for braze on versions 7 Nm 62in lbs ENGLISH 23 Campagnolo Campagne 2 1 ZERO SETTING of the front derailleur AN WARNING Resetting the front derailleur to zero is a particularly delicate operation and must be carried out when the bicycle is stationary and placed on a stand This is why it should be conducted only and exclusively by a Campagnolo Service Center a Campagnolo Pro shop or a mechanic specialised in mounting EPS groupsets ZN WARNING If your frame is made of carbon fiber contact the frame manufacturer to insu re that the frame will not be damaged by this 7 Nm 62 in lbs tightening torque or to determine what actions need to be taken to protect the frame from damage Even slight damage to a carbon fiber frame can result in an unexpected fa
3. LPT LLI A FRONT DERAILLEUR Campagne IN WARNING Carefully read follow and understand the instructions given in this manual It is an essential part of the product and you should keep it in a safe place for future reference MECHANIC QUALIFICATION Please be advised that many bicycle service and repair tasks require specialized knowledge tools and experience General mechanical aptitu de may not be sufficient to properly service or repair your bicycle If you have any doubt whatsoever regarding your service repair ability please take your bicycle to a qualified repair shop AN ACCIDENT Please note that throughout this manual reference is made that an accident could occur Any accident could result in damage to your bicycle its compo nents and more importantly could cause you or a bystander to sustain severe personal injury or even death INTENDED USE This Campagnolo product is designed and manufactured for use only on road racing style bicycles that are ridden only on smooth road or track surfaces Any other use of this product such as off road or on trails is forbidden LIFESPAN WEAR INSPECTION REQUIREMENT The lifespan of Campagnolo components depends on many factors such as rider size and riding conditions Impacts falls improper use or harsh use in general may compromise the structural integrity of the components and significantly reduce their lifespan Some components are also subject to wear over time P
4. i lure resulting in an accident personal injury or death 2 2 INSTRUCTIONS FOR DERAILLEUR WITH CARBON FIBER EXTERNAL CAGE CAUTION When you slip the chain through the derailleur cage Fig 4 do not strain the e Install the chain and position it on the smaller chainring and larger sprocket external carbon fiber semi cage since this could be irreversibly damaged 24 ENGLISH ENGLISH 25 Aampaqn lo 2 3 A ADJUSTING RIDING SETTING of front derailleur WITH V2 POWER UNIT If you are using the front derailleur with the V2 EPS Power Unit Fig 5 follow the procedure given below acO The setting adjustment procedure is used to change the position of the front derailleur relative to the individual chainrings Place the front derailleur on the chainring for which you intend to adjust the position To adjust the setting press and hold the MODE D Fig 6 Cs button on the Ergopower EPS controls for appro ximately 6 seconds until the purple LED illumina tes Adjust the position by pressing lever B or C on the left hand control set Fig 6 Note The system moves the front derailleur by a fixed increment of approximately 0 1 mm each time lever B or C is pressed Fig 6 To store the new setting press the MODE button on the Ergopower EPS controls briefly D Fig 6 26 ENGLISH Once the procedure i
5. in PDF format on our internet site www campagnolo com Scan this QR CODE to directly access the main page ENGLISH I HAVE A TECHNICAL PROBLEM Y Campagnolo contact my local mechanic access www campagnolo com and search for a Pro Shop near me lt ENO Problem solved Y Was a Pro Shop found NO Y OK gt gt contact a Campagnolo Pro Shop ls there a Campagnolo Service Center in my country OK gt contact the Campagnolo OK Service Center ENGLISH NO gt contact the s ore that sold me the product 21 IMPORTANT Always check the tables in the product technical manual to ensure compa tibility with the previous Campagnolo ranges Z WARNING THE EPS FRONT DERAILLEUR MUST BE MOUNTED AND CONNECTED ONLY AND EXCLUSIVELY BY ONE OF CAMPAGNOLO S SERVICE CENTERS A CAMPAGNOLO PRO SHOP OR A MECHANIC SPECIALISED IN MOUNTING EPS GROUPSETS PLEASE REMEMBER THAT TAMPERING OR INCORRECT OR INCOMPLETE INSTALLATION OF EVEN JUST ONE COMPONENT OF THE EPS GROUPSET AUTOMATICALLY RESULTS IN THE INVALIDATION OF ANY WARRANTY IN ZN WARNING O a Always wear protective gloves and glasses while working on the front derailleur 22 ENGLISH Campagnolo 2 ASSEMBLY When installing removing or servicing components switch off the
6. ith Campagnolo components Likewise tools supplied by Campagnolo s r l may not be compatible with components supplied by other manufacturers Always check with your mechanic or the tool manufacturer to in sure compatibility before using tools supplied by one manufacturer on components supplied by another The user of this Campagnolo product expressly recognizes that there are risks inherent in bicycle riding including but not limited to the risk that a component of the bicycle can fail resulting in an accident personal injury or death By his purchase and use of this Campagnolo product the user expressly voluntarily and knowingly accepts and or assumes these risks including but not limited to the risk of passive or active neglicence of Campagnolo s r l or hidden latent or obvious defects in the product and agrees to hold Campagnolo s r l harmless to the fullest extent permitted by law against any resulting damages ENGLISH 19 ampaqn lo 1 INFORMATION AND TECHNICAL SUPPORT Refer to the diagram on the following page when performing installation or adjustments or if you have a technical problem Scan this QR CODE to access the search page to find your closest Cam pagnolo Pro Shop or go to www campagnolo com NOTE FOR SPECIALISED MECHANICS Ple ase remember that all assembly disassembly adjustment and maintenance procedures for the EPS drivetrain are described in the EPS techni cal manual which is available
7. lease have your bicycle regularly inspected by a qualified mechanic for any cracks deformation signs of fatigue or wear If the inspection reveals any defor mation cracks impact marks or stress marks no matter how slight immediately replace the component components that have experienced excessive wear also need imme diate replacement The frequency of inspection depends on many factors check with your authorized Campagnolo representative to select a schedule that is best for you 18 ENGLISH Campagnolo If you weigh 82 kg 180 lbs or more you must be especially vigilant and have your bicycle inspected more frequently than someone weighting less than 82 kg 180 lbs for any evidence of cracks deformation or other signs of fatigue or stress Check with your mechanic to discuss whether the components you selected are suitable for your use and to determine the frequency of inspections Important PERFORMANCE SAFETY and WARRANTY Notice Dear customer please remember that to maximise the performance of your EPS drivetrain and to prevent jeopardising its safety performance long life and functionality it is abso lutely necessary to use the 6 components of EPS drivetrain with components of the Campagnolo 11 speed mechanical drivetrain it is not possible to use EPS components that are not manufactured by Campagnolo Note Tools supplied by other manufacturers for components similar to Campagnolo components may not be compatible w
8. metallic sponges N WARNING Salty environments such as roads in winter or in areas near the sea may cause galvanic corrosion on most of the bicycle s components To prevent damage mal function and accidents carefully rinse clean dry and lubricate all the components subjected to this phenomenon ENGLISH 31
9. s complete the system implements the change to the individual chainring position adjusted NOTE The procedure for adjusting the EPS front derailleur when used in conjunction with EPS Bar End controls and EPS Bar End brake levers is included in the respective instruction sheets IMPORTANT If you do not press the MODE key briefly which allows to complete the setting procedure the system will automatically exit the procedure after 90 seconds and will save the new setting Every time a resetting to zero is conducted previous adjustments are reset N WARNING Setting the front derailleur when the bicycle is in motion may result in dangerous situations and cause accidents Therefore please be very careful if you decide to do it A WARNING Keep your fingers clear while moving the front derailleur and the rear derailleur ENGLISH 27 ampaqn lo 2 3 B ADJUSTING RIDING SETTING of front derailleur WITH EXTERNAL POWER UNIT Ifyou are using the front derailleur with the exter nal EPS Power Unit Fig 7 follow the procedure given below The setting procedure allows to adjust the reference position of the derailleur To adjust the derailleur press and hold the MODE button D Fig 8 on the Ergopower EPS controls for approximately 6 seconds until the purple LED turns on Adjust the position by pressing lever B or lever C on the left control Fig 8 Note Every time lever B or lever C Fig 8 i
10. s pressed this allows the system to carry out a fixed shift of approximately 0 1 mm When you have completed the procedure the system will correct the established positions of all the chainrings based on the new settings 28 ENGLISH To save the adjustment briefly press the MODE button located on the Ergopower EPS controls D Fig 8 NOTE The procedure for adjusting the EPS front derailleur when used in conjunction with EPS Bar End controls and EPS Bar End brake levers is included in the respective instruction sheets IMPORTANT If you do not press the MODE key briefly which allows to complete the setting procedure the system will automatically exit the procedure after 48 seconds and will save the new setting Every time a resetting to zero is conducted previous adjustments are reset VAN WARNING Setting the front derailleur when the bicycle is in motion may result in dangerous situations and cause accidents Therefore please be very careful if you decide to do it M WARNING Keep your fingers clear while moving the front derailleur and the rear derailleur ENGLISH 29 Aampaqn lo 3 REMOVAL MAINTENANCE A WARNING THE EPS DRIVETRAIN MUST BE DISASSEMBLED ONLY AND EXCLUSIVELY BY ONE OF CAMPAGNOLO SERVICE CENTERS A CAMPAGNOLO PRO SHOP OR A MECHANIC SPECIALISED IN MOUNTING EPS GROUPSETS e When installing removing or servicing components switch off the EPS drivetrain as indicated
Download Pdf Manuals
Related Search