GIGABIT ROUTER WIRELESS 300N
Contents
1. The Choose WAN Connection Type screen will appear Please select one compatible with your ISP Click Next to configure the necessary network parameters Quick Setup WAN Connection Type The Quick Setup is preparing to set up your connection type of WAN port The Router will try to detect the Internet connection type your ISP provides if you select the Auto Detect option Otherwise you need to specify the connection type manually Auto Detect Let the Router automatically detect the connection type your ISP provides PPPoE For this connection your will need your account name and password from your ISP Dynamic IP Your ISP uses a DHCP service to assign your Router an IP address when connecting to the Internet Static IP This type of connection uses a permanent fixed static IP address that your ISP assigned Next If you have a Dynamic IP or automatic IP account select Dynamic IP and click Next the router will automatically get IP parameter from your ISP without entering any parameters If you have a fixed IP or static IP account select Static IP and click Next to load the following figure and fill the blanks with the parameters provided by your ISP Quick Setup Static IP IP Address 172 31 70 88 Subnet Mask 255 255 255 0 Default Gateway 172 31 70 1 Optional Primary DNS 172 31 51 2 Optional Secondary DNS 0 0 0 0 Optional After you complete2. generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference 2 This device must accept any interference received including interference that may cause undesired operation 15 Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment FCC RF RADIATION EXPOSURE STATEMENT This device has been tested for compliance with FCC RF Exposure SAR limits in the typical laptop computer configuration and this device can be used in desktop or laptop computers Thi
3. last in the first 2 minutes On A wireless device has been successfully added to the network by WPS function Quick Flash A wireless device failed to be added to the network by WPS function OVERVIEW OF CONNECTIONS AT THE BACK OF THE ROUTER a a 22620 h EL Swiichiiwb LA k L LIII LLLI I LLL a ou mm Ge we eee m nm m F DSL Cable Eihomel m ee O E m c m ROUTER CONFIGURATION After you have correctly connected the router you can start to configure it For some providers you will need addition information such as your username and a password Start up the Internet browser and enter the following address in the address bar http 192 168 1 1 and press Enter Address http 192 168 1 1 m The following screen is displayed To access the router enter admin for username and admin for password and then click OK Connect to 197 168 1 1 A ICIDU 3009 WIRELESS GIGABIT ROUTER Password E Remember my password CONNECTING TO THE INTERNET After successful login you can configure the router using the web browser Please click the Quick Setup link on the left of the main menu and the Quick Setup screen will appear Click Next to continue Quick Setup The quick setup will tell you how to configure the basic network parameters To continue please clickthe Next button To exit please click the Exit button Next
4. 3 CE MARK WARNING This is a class B product In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures NATIONAL RESTRICTIONS This device is intended for home and office use in all EU countries and other countries following the EU directive 1999 5 EC without any limitation except for the countries mentioned below COUNTRY RESTRICTION REASON REMARK Bulgaria None General authorization required for outdoor use and public service France Outdoor use limited to Military Radiolocation use 10 mW e i r p within the Refarming of the 2 4 GHz band has band 2454 2483 5 MHz been ongoing in recent years to allow current relaxed regulation Full implementation planned 2012 Italy None If used outside of own premises general authorization is required Luxembourg None General authorization required for network and service supply not for spectrum Norway Implemented This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny Alesund Russian Federation None Only for indoor applications Please don t use the product outdoors in France FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment
5. ANGE OF APPLICATIONS This router allows you to set up a wireless broadband Internet connection on multiple computers On top of a shared Internet connection you can also set up a network between several PCs Con nect the ADSL or cables modem to the WAN port of the router and after a few seconds the WAN LED will light up You can now connect the PCs Once the PCs have been started up the relevant LED will light up HARDWARE INSTALLATION As soon as you have connected the router to the power adapter the power LED Green will light up once The other LEDs Green will light up as soon as one of the UTP ports are connected to the computer When data is transferred from one computer to another the LEDs will start to flash LED INDICATORS Name Status Indication Power Off Power is off On Power is on System On The Router is initializing or maybe has a system error Flashing The Router is working properly Off The Router has a system error WLAN Off The Wireless function is disabled Flashing The Wireless function is enabled WAN Off There is no device linked to the corresponding port LAN 1 4 On There is a device linked to the corresponding port but there is no activity Flashing There is an active device linked to the corresponding port USB Off There is no connected storage device On There is a device linked to the corresponding port WPS Slow Flash A wireless device is connecting to the network by WPS function This process will
6. COMMUNICATION und 300 MBPS WITH USB PORT CONTENTS OF THE PACKAGE TECHNICAL SPECIFICATIONS RANGE OF APPLICATIONS HARDWARE INSTALLATION ROUTER CONFIGURATION CONNECTING TO THE INTERNET WPS CE FCC WARRANTY O q au Q 14 17 GIGABIT ROUTER WIRELESS 300N 300 MBPS WITH USB PORT Thank you for buying this 300N router If you want to interconnect several PC s for shared Internet access you will need an additional component to connect the PCs This router allows you to set up a wireless network quickly and efficiently The USB port enables NAS functionality when connecting an external hard disk ICIDU CONTENTS OF THE PACKAGE Before starting the installation first check that all necessary parts are present The box should contain Gigabit Wireless Router 300N Power adapter 12V 1 5A CD with full manual User manual TECHNICAL SPECIFICATIONS 802 11n wireless protocol Maximum wireless data transfer speed 300Mbps Gigabit LAN Gigabit WAN Mimo Multi In Multi Out USB port for NAS functionality Supports IEEE 802 11b and IEEE 802 110 E Supports WEP WPA WPA2 TKIP AES 3x Aerial 3dBi Supports 64 128 152 bit WEP encryption security Maximum wired data transfer speed 1Gbps Web Based Management E Supports Dynamic IP Static IP PPPoE 1 x WAN 4 x LAN RJ 45 UTP ports E Built in NAT and DHCP server Supports VPN pass through Independent of operating system R
7. s device cannot be used with handheld PDAs personal digital assistants This device and its antenna must not be co located or operated in conjunction with any other antenna or transmitter SAR measurements are based on a 5mm spacing from the body and that compliance is achieved at that distance WARRANTY Unless specified otherwise all items sold under the ICIDU name are covered by a 10 year warranty No warranty or support is provided for the software and rechargeable batteries that are provided Claims under warranty can be made only via the dealer from whom the item was purchased Specifications can be changed without notice All ICIDU products comply with current European safety and environmental standards and legislation For further details visit our website www icidu com ICIDU is a registered trademark All other brand names and rights in connection with them are and remain the property of the rightful owner Copyright 2011 ICIDU All rights expressly reserved 17 ICIDU ICIDU SUPPORT FOR YOU
8. the above click Next the Wireless settings screen will appear as the following Quick Setup Wireless Wireless Radio Enable K SSID Region Netherlands Channel Mode 11bgn mixed Channel Width Max Tx Rate 300Mbps Wireless Security o Disable Security O WPA PSKWPA2 PSK You can enter ASCII characters between 8 and 63 or Hexadecimal characters between 8 and 64 O No Change Nor At the end of the Quick Setup click the Finish button to exit this Quick Setup The router should now be connecting you to the Internet 11 Use this space to write down your router s settings Wireless Settings SSID adds PSK NB To get the most out of your router please see the complete manual on the CD ROM WPS CONFIGURATION WPS Wi Fi Protected Setup function allows you to add a new wireless device to an existing network quickly WPS can only be used if the router also supports this feature Push the button on the router and on the adapter and wait until the following screen appears Then click Finish ls WPS for Wireless Wireless Configuration Completed Your computer has successfully joined the test network The WPS connection can also be established by making the connection in the software utility This will also enable you to use a PIN code For more information on WPS please read the full manual on the CD 1
Download Pdf Manuals
Related Search