1 COCONEL User Manual :- Thank you very much for purchasing
Contents
1. be scalded or triggering a fire Please ensure that the baby s clothes string or hood do not get caught with the top rail top frame or vertical support There may be a risk of suffocation to the baby Do not let the baby crawl under the crib There may be a risk unforeseeable accident or injury to the baby Please do not attach strings string like items toys etc to this product and do not leave wet laundry to dry on this product There may be a risk of suffocation to the baby Please do not move the crib when the baby is nearby There may be a risk unforeseeable accident or injury to the baby Please check to ensure that the floorboard has been assembled completely and is flatly installed on the main body Otherwise there may be a risk unforeseeable accident injury or suffocation to the baby Please do not use the crib with the top rail top frame unlocked There may be a risk of suffocation or a risk of the baby climbing over the top rail and falling off the crib When installing the floorboard make sure that the hook and loop fasteners on the side of the main body are fastened on the floorboard Otherwise there may be a risk of the baby getting caught in the gap between the floorboard and main body thus resulting in unforeseeable accident injury or suffocation to the baby Please maintain a balanced and steady posture when operating the open close lock on the inside of the crib or when installing or removing the floorboar2. point of support when assembling and folding this product lt Floorboard at the upper level gt 426 Hook ot EE Hook and loop fasteners 1 Unfasten the hook and loop fasteners 4 locations 2 Disengage the floorboard hooks 4 locations and remove the floorboard 19 RIRE FER lt Floorboard at the lower level gt p Sliding front rail Floorboard 1 Unfasten the hook and loop fasteners on the side of the main body left and right 2 locations 2 Remove the floorboard Advice o Ifyour hand cannot reach the floorboard please lower the sliding front rail before proceeding Hook and loop fastener E Collars Supporting tube 3 Flip the floorboard over after removing it from the crib 4 Keep the hooks in the pouches of the floorboard 4 locations When removing the floorboard from the upper level 5 Unfasten the hook and loop fasteners at the collars and remove the supporting tubes 3pcs Hook and loop gagfastener Di Through hole Sak Floorboard a FR Side wall cover Side wall panel Meg 6 Flip the floorboard upright and unfasten the hook and loop fasteners at the corners 20 7 Remove the side wall panels from the side wall covers of the floorboard Front and back 21 How to use the crib amp playard Folding the crib amp playard Warning o Please be careful not to pinch your hand leg or finger when assembling or folding the crib or when operati
3. COCONEL User Manual Thank you very much for purchasing Aprica s product This product is a single bed set for use with a baby from newborn until 24 months old approximately 13kg in weight Newborn babies refer to babies who are born after 37 weeks of pregnancy and weigh above 2 5kg at birth Before use please read this user manual carefully and use the product accordingly After reading please keep this manual in a convenient place for future reference Please do not use this product in ways other than those specified in this user manual Otherwise the product may not perform as indicated and it may result in serious danger About SG standards SG is the abbreviation of Safety Goods which is created by the Consumer Product Safety Association In regard to the structure material and usage products which pose danger to life and body will have to pass the assessment based on the relevant stipulated certification criteria mandatory for a safe product as prescribed by the Consumer Product Safety Association before they are allowed to bear the SG mark o Cribs that show the SG mark fulfill the following criteria Applicable range This crib is suitable for use by a typical family and it is a single baby crib for sleeping and childcare purposes Types Baby crib Usage range From newborn to 24 months old reference weight of 13kg Floorboard height Upper level From newborn to when baby is able to stand up with support L
4. d Otherwise there may be a risk of falling into the crib thus resulting in unforeseeable accident Please use a mattress or mattress pad of suitable firmness and with a mini bed dimension 60x90cm which does not leave a gap with the crib Otherwise there may be a risk of suffocation injury or other unforeseeable accidents Please take note of the height of the mattress or mattress pad used This is to prevent the baby from climbing over the top frame and falling off the crib easily Please keep the packaging material carry bag and other items out of the baby s reach Otherwise there may be a risk of suffocation to the baby Please assemble the crib in accordance with the user manual this manual Otherwise there may be a risk of unforeseeable accident or injury Please be careful not to pinch your hand leg or finger when assembling or folding the crib or when operating the sliding rail Otherwise there may be a risk of unforeseeable accident or injury When shifting the floorboard to the lower level the hooks in the corners should be kept in the pouches on the inside of the floorboard Otherwise there may be a risk of unforeseeable accident or injury to the baby Please check to ensure that the crib has been assembled completely before use Otherwise there may be a risk of the baby or the baby s clothes getting caught in the crib thus resulting in injury or suffocation Before use please check for damages in the produc
5. g Usage o Please read this user manual thoroughly and use the product accordingly to prevent unforeseeable accidents Warning item denoting where misuse may cause fatal or serious injury Do not use with babies who are over 24 months old or over 13kg in weight Otherwise there may be a risk of the baby climbing out tumbling over or falling off the crib When the baby is able to stand up with support shift the floorboard to the lower level so that the top rail top frame is at least 60cm above the floorboard Otherwise there may be a risk of the baby climbing over the top rail and falling off the crib Except when placing the baby in or taking the baby out of the crib leave the sliding front rail at the top rail position Otherwise there may be a risk of the baby climbing over the sliding front rail and falling off the crib Please do not place objects on which the baby can step inside or outside of this product Otherwise there may be a risk of the baby climbing out tumbling over or falling off the crib Please do not allow two or more babies on the crib at the same time and do not let the baby hang on the horizontal rail Otherwise there may be a risk of the baby climbing over the top rail sliding front rail and falling off the crib Please set the crib indoor on a flat and even surface Do not use the crib near a fire source or heating device Otherwise there may be a risk of the crib tumbling over thus causing the baby to
6. ication 25
7. k sound Warning o Except when placing the baby in or taking the baby out of the crib leave the sliding front rail at the top rail position Otherwise there may be a risk of the baby climbing over the sliding front rail and falling off the crib o Please be careful not to pinch your hand leg or finger when assembling or folding the crib or when operating the sliding rail Otherwise there may be a risk of unforeseeable accident or injury o Please do not sit lean on or shake the frame There may be a risk of the crib toppling over thus resulting in unforeseeable accident or injury 18 How to use the crib amp playard Folding the crib amp playard Warning o Please be careful not to pinch your hand leg or finger when assembling or folding the crib or when operating the sliding rail Otherwise there may be a risk of unforeseeable accident or injury o Please do not assemble or move the crib or operate the sliding rail when the baby is nearby There may be a risk of unforeseeable accident or injury to the baby o Please maintain a balanced and steady posture when operating the open close lock on the inside of the crib or when installing or removing the floorboard Otherwise there may be a risk of falling into the crib thus resulting in unforeseeable accident Advice o This product can be assembled by one person but it will be safer if the assembly is carried out by two persons o Please use the centre of the body as the
8. lanced and steady posture when operating the open close lock on the inside of the crib or when installing or removing the floorboard Otherwise there may be a risk of falling into the crib thus resulting in unforeseeable accident 16 How to use the crib amp playard Moving the crib amp playard Warning o Please do not move the crib when the baby is nearby There may be a risk unforeseeable accident or injury to the baby o Please do not move the crib with the baby in it Otherwise there may be a risk of unforeseeable accident or injury Caution o When assembling or moving the crib please be careful not to damage the floor or wall he About 15cm o f astor 15cm e The crib has four legs and two of the legs are equipped with castors for the purpose of moving the crib To move the crib please tilt the crib by lifting the legs without the castor by about 15cm and leaving the castors in contact with the ground Using the sliding front rail e Please lower the sliding front rail before placing the baby in or taking the baby out of the crib CPE SSK ER gt lt Lowering the sliding front rail gt EENI Sliding front rail e Release the sliding rail locks left and right and lower the sliding front rail 17 Heme nkK Ei lt Raising the sliding front rail gt 1 Release the sliding rail locks left and right and raise the sliding front rail 2 Check that the rail is locked when there is a clic
9. lding the crib or when operating the sliding rail Otherwise there may be a risk of unforeseeable accident or injury Floorboard Side walls m Rik Tinang Ale mE N gup N Hook and loop fastener E Pl BE tz Side wall cover Side wall panel 1 Insert the side wall panels into the side wall covers of the floorboard Front and back 2 Raise the side walls of the floorboard insert the hook and loop fasteners at the corners through the through holes and then fasten them 4 locations ER Collars ze Supporting tube f 2 Hook and loop Re fastener Hook and loop fasteners 13 3 Flip the floorboard over 4 Unfasten the hook and loop fasteners at the collars and insert the supporting tubes 3pcs Insert the supporting tubes right through the end to prevent the tubes from jutting out 5 Fasten the hook and loop fasteners after the supporting tubes have been inserted 14 How to use the crib amp playard Installing the floorboard Warning o When the baby is able to stand up with support shift the floorboard to the lower level so that the top rail top frame is at least 60cm above the floorboard Otherwise there may be a risk of the baby climbing over the top rail and falling off the crib o When shifting the floorboard to the lower level the hooks in the corners should be kept in the pouches on the inside of the floorboard Otherwise there may be a risk of unforeseeable accident or injury to the bab
10. ng the sliding rail Otherwise there may be a risk of unforeseeable accident or injury o Please do not assemble or move the crib or operate the sliding rail when the baby is nearby There may be a risk of unforeseeable accident or injury to the baby o Please maintain a balanced and steady posture when operating the open close lock on the inside of the crib or when installing or removing the floorboard Otherwise there may be a risk of falling into the crib thus resulting in unforeseeable accident Click Click Sliding front rail i 8 Return the sliding front rail to the highest position Refer to P 11 Advice o If your hand cannot reach the open close lock please lower the sliding front rail temporarily and return it to the highest position after completing Step 9 EATA Position of open close lock J L mp Open close lock E seesrerren rT k 9 Pull the open close lock upward until the locked position Refer to P 7 The legs will fold inward as the lock is pulled upward Release button Release button 22 Top frames f 7N Top frames vos front and back ak yd AN left and right LE RE ow bt 26 Position of open close lock 10 Squeeze the release buttons on the top frames front and back and push downward 11 Squeeze the release buttons on the top frames left and right and push downward Advice o Ifthe top frames cannot be unlocked please do not push down
11. oving the crib please be careful not to damage the floor or wall Advice o This product can be assembled by one person but it will be safer if the assembly is carried out by two persons o Please use the centre of the body as the point of support when assembling and folding this product 5 2s lt Maintain the position of the open close lock gt Open close lock Yt Open close lock i PARIR ii hf a BAGS ie ry a TAI _ fF sae O JH l EAT 7 Efl if Position of S i pe open close lock A j Sax LJ y F 1 Lay the main body flat and unfasten the hook and loop fasteners 2 locations Remove the main body 2 Pull the open close lock upward to the locked position approximate position as shown in the diagram and keep it at this position Advice o The top frames cannot be locked if the position of the open close lock is too low Top frame tE rere Open close lock s Vey SF a Position of open close lock 3 Maintain the open close lock at the height of the locked position and lock the top frames front and back by pulling them upward until a click sound is heard o Check to ensure that the top frames have been locked and cannot be folded Advice o Ifthe top frames fail to lock it could be that the position of the open close lock is too low Please pull the open close lock up and pull the top frames until a click sound is heard 10 How to use the crib amp playa
12. ower level From when baby is able to stand up with support to 24 months old Criteria for structure Height of top rail top frame from the floorboard gt 35cm for upper level and gt 60cm for lower level The area within 15cm above the floorboard is to be surrounded by a solid structure Newborn babies refer to babies who are born after 37 weeks of pregnancy and weigh above 2 5kg at birth About PSC system PSC is the abbreviation of Product Safety of Consumer Products Products which pose particularly high risk to the life and body of the consumer are not allowed to be sold in Japan if they do not bear the PSC mark which represents conformity to the technical standards prescribed by the Japanese government o Cribs that show the PSC mark special specified products fulfill the technical standards prescribed by the Japanese government Markings used in this manual o Warning Caution and Prohibition marks are classified according to the severity of the resulting danger or damage when they are not adhered to The contents are very important and please make sure to follow them properly Mark Meaning Warning ltem denoting where misuse may cause fatal or serious injury Caution Item denoting where misuse may cause bodily injury or damage to the property Advice Convenient tip for operating and using this product Prohibition Please do not use the product in a manner which is prohibited in this manual Cautions Regardin
13. owth due to dampness When unpacking the product o Please check for missing or damaged parts after unpacking the product o For damaged or missing parts please contact our customer support centre Refer to P 17 o Before use please fill in the following items of the Warranty Letter on P 18 Model refer to Name of parts on P 6 Date of purchase Customer name address and contact DONO Store of purchase Main body REE 92 Floorboard Supporting Teea tubes 3pcs AAAA Accessories EA aA OS ae pi P T ne nl 2 SS e ne a a S lt a RER 2A WAT EA FARAS FBS HRE Side wall Carry bag User manual warranty panels 2pcs letter this manual Before assembly things to note o Please place a piece of cloth or carpet over the floor where the crib is assembled or folded and pay full attention not to cause damage to the product floor and existing furniture o Please take note of all the outer and inner surfaces left and right sides and top and bottom sides of the parts and components during installation Ensure that they are installed correctly with reference to the user manual o After assembly please check that the product has been assembled completely in accordance with the user manual before starting to use the product The product must be assembled by an adult No tool is required for assembly Warning o Please keep the packaging material carry bag and other items ou
14. rd Open close lock Top frame Ltt EHHE 20E Position of open close lock 4 Use the same method as in Step 3 lock the top frames left and right by pulling them upward until a click sound is heard o Check to ensure that the top frames have been locked and cannot be folded 5 Lift the main body and spread out the legs Advice o Ifthe top frames fail to lock it could be that the position of the open close lock is too low Please pull the open close lock up and pull the top frames until a click sound is heard e Sliding front rail HHH Open close lock 6 Press the open close lock down to lock it 11 Advice o If your hand cannot reach the open close lock please lower the sliding front rail before pressing the open close lock down Refer to P 11 Warning o Please maintain a balanced and steady posture when operating the open close lock on the inside of the crib or when installing or removing the floorboard Otherwise there may be a risk of falling into the crib thus resulting in unforeseeable accident o Before using this product please check to ensure that it has been assembled completely Otherwise there may be a risk of the baby or the baby s clothes getting caught in the crib thus resulting in injury or suffocation to the baby 12 How to use the crib amp playard Assembling the floorboard Warning o Please be careful not to pinch your hand leg or finger when assembling or fo
15. t broken or loose joints and splits in fabric parts Please do not use the crib if there is any damage or fault Please do not place this product near the curtain or the cord of a window blind There may be a risk of suffocation to the baby Please do not use a plastic cushion or plastic cushion cover There may be a risk of suffocation to the baby Please do not place items which pose risk of injury or suffocation in the crib Please do not use a water cushion with this product There may be a risk of unforeseeable accident Please do not move the crib with the baby in it Otherwise there may be a risk of unforeseeable accident or injury Please do not let the baby play near the crib There may be a risk of unforeseeable accident or injury to the baby Please do not use the crib in a place with strong sunlight for a prolonged period This may lead to elevated temperature inside the crib Please do not sit lean on or shake the top rail top frame There may be a risk of the crib toppling over thus resulting in unforeseeable accident or injury Do not use a modified product Please do not use the baby crib for purposes other than sleeping and childcare Caution item denoting where misuse may cause bodily injury or damage to the property o When assembling or moving the crib please be careful not to damage the floor or wall o Do not leave the mattress or mattress pad in the crib all the time There may be a risk of mildew gr
16. t of the baby s reach There may be a risk of suffocation to the baby Caution o When assembling or moving the crib please be careful not to damage the floor or wall Name of parts lt Main body gt floorboard installed at the upper level Release buttons REFER 4 Flobr pard fk Topti tdpMfrdame 4 locations Slide lock 2 locations left and right S A628 Hook and loop fasteners 4 locations for upper level BK LERE SN f ee Sliding front rail Hook and loop fasteners Roe becca eer ib MIKE 2 locations for lower level EN AR o mee 2s See net wonn FER2 ae ees ee oe Cen side of the right leg PaRi Legs n RE fOpen close lock RISS aaa Sticker showing product name model number and lot number Castor RiR DREZE lt Floorboard gt assembled Hook and loop fasteners Hooks 4 locations 4 locations 5 48 D 5 UR e of floorboard gt l hoien fibok How to use the crib amp playard Assembling the main body Warning o Please do not assemble the main body when the baby is nearby There may be a risk of the baby bumping into the product or parts or getting pinched in the hand leg or finger thus resulting in injury to the baby o Please be careful not to pinch your hand leg or finger when assembling or folding the crib Otherwise there may be a risk of unforeseeable accident or injury Caution o When assembling or m
17. ward forcefully but gently pull the open close lock toward the top frame o Ifthe top frame cannot be folded it could be that one of the sides connected to the left or right of the release button has not been fully disengaged Please squeeze the release button again 23 Page 14 How to use the crib amp playard Floorboard PRR Side wall cover Hee BRL Sliding front rail 12 Pull the open close lock upward while folding the top frames 13 Fold and stow the mesh fabric on the sides of the main body inward 14 Spread the floorboard out face up and fold the side wall covers inward 15 Place the main body on position 3 of the floorboard with the sliding front rail facing down Floorboard Pag Bee Hook and loop fastener Advice 24 o Roll up the floorboard which has been divided into five equal sections with reference to the diagram below 16 Roll the floorboard around the main body and fasten it with hook and loop fasteners 2 locations lt Q ay 3 0 E gt lt Using the carry bag gt Side wall panels 2pcs Supporting tubes 3pcs 1 Unzip the carry bag and put the main body side wall panels and supporting tubes into the bag 2 Zip up the carry bag o Should you encounter any error or omission in this user manual please contact our customer support centre o Improvements to this product which will lead to parts differing from what are shown here may be made without prior notif
18. y lt Installing at the upper level gt From newborn to when baby is able to stand up with support Floorboardl ag O aa Hook i Corner se Hook and loop fasteners S45 4E 4 locations 1 Remove the hooks from the pouches of the floorboard 4 locations 2 Flip the floorboard upright and fasten the hooks to the corners of the main body 4 locations 3 Push the floorboard down and check that the hooks are not twisted or loosened 4 Fasten the hook and loop fasteners on the side of the main body to the floorboard 4 locations lt Installing at the lower level gt From when baby is able to stand up with support to 24 months old Hook and loop fasteners J 2 locations fi HH 2 15 1 Keep the hooks in the pouches of the floorboard 4 locations 2 Flip the floorboard upright and place it at the base of the main body 3 Fasten the hook and loop fasteners on the side of the main body left and right to the floorboard 2 locations Advice o If your hand cannot reach the floorboard please lower the sliding front rail before proceeding Warning o When installing the floorboard make sure that the hook and loop fasteners on the side of the main body are fastened on the floorboard Otherwise there may be a risk of the baby getting caught in the gap between the floorboard and main body thus resulting in unforeseeable accident injury or suffocation to the baby o Please maintain a ba
Download Pdf Manuals
Related Search