Conductive Rubber Loop Instructions - E
Contents
1. a Conductive Rubber Loop Instructions Congratulations on your purchase of a pair of F Stim Systems Conductive Rubber Loops The conductive loops offer a comfortable and safe introduction to conductive rubber electro play Adjustments The 2mm TENS sized conductive rubber loops are supplied with a spring loaded adjustable collar Simply squeeze the collar to release the tension on the rubber loop then adjust the size of the loop Release the collar when you are happy with thefit The 4mm sized loops are supplied with a rubber collar To adjust the size gently pull on therubber and easeinto position Be careful when pulling on the rubber loops they will snap if excessive force is used Try not to remove the collar completely as it is possibly to loose the small spring Safety DO NOT CONNECT ANY ELECTRICAL DEVICE TO ANY LOCATION ABOVE THE WAIST ACROSS THE ARMS COUNTS AS ABOVE THE WAIST BUT ESPECIALLY DO NOT CONNECT ACROSS THE HEART CHEST NECK OR HEAD DO NOT USE IF FITTED WITH A PACEMAKER OR ARE PREGNANT REMEMBER YOU USE THIS DEVICE AT YOUROWNRISK N Cleaning The conductive loops may be cleaned with soap and water medical grade cleaning wipes or other cleaning materials suitable for medical instruments Ensure the loops are clean and dry before storage Connection Each conductive loop has two holes in the end of the rubber To connect simply push a plug of the relevant size into one loop a2. nd the other plug into a hole on the other loop Not on the same loop To remove pull the plug not the wire and gently twist anticlockwise Testing If you are unsure as to the effect the conductive loops might have then try them on your hand first Ensure the loops do not touch each other To use Place the loops on the penis ensuring they do not touch each other and adjust the size so they are comfortable Connect oneplug to one loop and the other to the other loop asnoted previously In use the current will then flow between the two loops stimulating the areas in between If the loops slide during use consider using TacGel an adhesive conductive Gel Switch the control box on and slowly increase the output level to provide the desired level of stimulation If the subject feels discomfort then reduce the power levels To remove Reduce the output levels to minimum switch off the box and then unplug the cable from the control box Do not remove the cables from either the control unit or the electrode whilst in operation as inadvertent electric shocks may be experienced www e stim co uk 0845 450 BL
Download Pdf Manuals
Related Search