User manual
Contents
1. OPTION SELECTION BUTTON CONFIRM OPTIONS BUTTON DELAY PROGRAM BUTTON START PAUSE BUTTON POWER ON LIGHT PROGRAMS INDICATOR LIGHTS INFORMATION DISPLAY RECESSED DOOR HANDLE O ON ODO oa RAON a e N B symbols and styling are guideline and may vary depending on the model or version of the dishwasher purchased User instructions EN 1 2 Information display The dishwasher is equipped with a practical DISPLAY which provides information on the programmed dishwasher functions A nm c ur Uu S RO Profesi sional D E 4 FIGURE DISPLAY RINSE AID WARNING LIGHT SALT WARNING LIGHT START PAUSE BUTTON OPTIONS LIGHT moou p PROGRAMS TABLE The manual contains the programs table for several models To find the table for your dishwasher compare the program symbols at the top of the table with those on your control panel CEN User instructions PROGRAMS TABLE DETERGENT PROGRAMME NUMBER amp LOAD CROCKERY AND PROGRAM PROGRESS ouod eos SYMBOL MENT MENT G H K 1 SOAK e Pans and dishes awaiting wie 2 Aes completion of the load SORES 0g 2 NORMAL Cold prewash ECO Glass china and mixed Wash at 49C 5g 20g dishes with light dirt Rinse at 40 e dase Dry 3 ECO Dishes with normal dirt Mio ia even with dried on Rinse at 70 10g 25g Eco residues D ry 4 AUTO 2 When the AUTO program is selected the 60 70 Pans and dishes with dishwasher recognises the type of dirt and Auto p d2. Rinse at 70C Wash at 65T Cold rinse Rinse at 65 Wash at 65C Cold rinse Rinse at 70C Hot prewash Wash at 72T 2 cold rinses Rinse at 706 DETERGENT COM COM PART PART MENT MENT G H G H 30g 30g 30g 10g 25g If the dishwasher door is open or not properly closed the washing cycle will not start Only run the soak program with half loads Options cannot be used with the soak program The HALF LOAD option cannot be used with the soak program or the professional programs The ENERSAVE option if featured cannot be used with soak ultra clean or any programs which do not include the final drying stage The cycle duration and power consumption may vary according to the water and room temperatures and the type and amount of dishes CEND User instructions DURATION AND CONSUMPTION 5 40 0 02 0 02 3 ECO Eco 114 119 116 124 10 5 0 72 1 17 5 ULTRA CLEAN 1 ns GW 115 120 119 128 17 3 0 93 1 69 G AA R 9 Ed 7 ULTRA RAPID 16 20 19 25 12 0 68 1 46 Eco Professional ENSUE c AT 45 45 5 145 7 0 77 1 59 5 2 2 Values are with the appliance power set on P3 6 User instructions CEN 1 3 Washing programs The dishwasher is equipped with a control panel and an INFORMATION DISPLAY from which it is possible to carry out all the power switch on switch off and programming operations Before starting a washing program make sur
3. and carefully screw the water intake hose back into position CLEANING THE SPRAY ARMS The spray arms can be easily removed for periodic cleaning of the nozzles to prevent possible clogging Wash them under running water and carefully replace them in their seats checking that their rotary movement is in no way impeded e To remove the upper spray arm unscrew locking ring R e To remove the orbital spray arm assembly take hold of the longer arm and pull the orbital unit upward Wash the arms under a jet of running water and return them carefully to their seat After reassembly check that the spray arms turn freely Otherwise check that they have been installed correctly ORBITAL 29 User instructions 30 CLEANING THE FILTER UNIT It is advisable to periodically inspect the centre filter C and if necessary to clean it To remove the filter grip the tabs turn them anticlockwise and lift upwards push the centre filter D from the underside to remove it from the micro filter separate the two parts which make up the plastic filter by pressing the body of the filter in the zone shown by the arrows remove the centre filter by lifting it upwards GENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT MAINTENANCE The filters should be cleaned under running water using a stiff brush When removing the filter take care that there are no food residues on it If any residues fal
4. carried out for one or all of the options available To deactivate an option which has already been confirmed press the OPTION SELECTION button l until the OPTION LIGHT required flashes and press the CONFIRM OPTION button e The light stops flashing and goes out All options except Flexi Tabs are disabled at the end of the wash cycle PROFESSIONAL PROGRAMS OPTION Enables operation in Professional mode giving access to 4 extra programs with the times and performances usually associated with professional dishwashers To activate the option first select the basic program corresponding to the professional cycle required N B the highest power and shortest times will be obtained with dishwashers connected to the highest power supply and hot water see electrical and water supply hook up instructions 11 User instructions EnerSave x OW Flexi Tabs 12 ENERSAVE This option can be selected with the wash programme of choice to further reduce energy consumption Drying is aided by a special device that automatically releases the door which opens slowly and smoothly by a few centimetres This ensures perfect drying and greater control of rinsing temperatures which can be kept at lower levels for significant energy saving Once the door has opened the end of the wash cycle is indicated by a short beep Enersave is activated automatically every time a wash cycle is selected except for programs that do not in
5. clockwise The amount of rinse aid must be increased if the washed dishes appear dull or feature circular stains If on the other hand the dishes are sticky or have white streaks it is necessary to reduce the rinse aid setting 17 User instructions 18 ADDING THE DETERGENT To open the detergent dispenser cap lightly press the button P Add the detergent and close the cap carefully During the washing cycle the dispenser will be opened automatically As e When a program with hot prewash is selected see program table extra detergent must be placed in the cavity G H depending on models e Use only detergents specially formulated for dishwashers For optimal washing results it is important to use a good quality detergent e The detergent packs must be sealed and stored in a dry place to prevent the formation of lumps which may negatively affect washing results Once opened the detergent packs should not be kept for too long otherwise the detergent loses its effectiveness e Do not use detergents formulated for washing dishes by hand because they produce a great deal of foam and may negatively affect the operation of the dishwasher e Add the correct amount of detergent An insufficient amount of detergent will result in a partial removal of dirt from the dishes whereas an e
6. on the bottom to facilitate removal then load them into the LOWER BASKET There is no need to pre wash the dishes under running water before loading them into the baskets since this only wastes water Correct loading of the dishes helps ensure optimal washing results 19 User instructions 20 WARNING e Make sure that the dishes are securely in place so that they cannot tip over or obstruct the rotation of the spray arms during the washing cycle e Do not place very small objects in the baskets as these could fall and obstruct the spray arms or the wash pump e Containers such as cups bowls glasses and pots should always be loaded with the opening facing downwards and with any cavities at an angle to allow the water to drain out e Do not stack dishes or place them in such a way that they cover one other e Do not place glasses too close together because they may knock against each other and break or there might be staining at the point where they touch MAKE SURE that the items being washed are dishwasher safe Items which are not dishwasher safe e Wooden dishes pots or pans these may be damaged by the high washing temperatures e Handcrafted items these are rarely suitable for washing in a dishwasher The relatively high water temperatures and the detergents used may damage them e Plastic dishes heat resistant plastic dishes must be washed in the upper basket e Dishes and objects in copper tin z
7. them upward and turn them towards the inside of the basket f se A Wl E E Anti drip inserts which improve the drying of dishes They may be supplied fitted on the basket or in the accessories bag in this case to use them simply fit them into place as shown 21 CEN User instructions 22 Supports for cups and long objects ladles spoons etc in the rear can be tipped to the vertical position when not in use Glass holder Support for long stem glasses When lifted out of the stowed position 0 it snaps into three different positions 1 2 3 2 position fold down supports 1 2 In position 1 vertical they can be used to take plates while in position 2 slanted they provide support for long stem glasses which will be held in place by the glass holder Adjustment raise point P as shown until the support turns into position 2 User instructions CEND To lie completely flat lift the end and turn it towards you so that the retainer F rotates into place above point S LOADING THE LOWER BASKET Carefully load flat plates soup plates dessert and serving dishes positioning them vertically Pots pans and their covers must be loaded upside down When loading soup plates and dessert bowls be sure to leave a gap between them T MiNi i LLLI 23 CEN User instructions 24 FLEXIDUO TOP RACK Th
8. INSTRUCTION MANUAL CEND GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS Contents CEND 1 Description of the controls 2 2 Operating instructions 14 3 Cleaning and maintenance 29 4 Troubleshooting 33 Thank you for choosing one of our products You are advised to read this manual carefully it contains all the information you need about the right conditions for the proper safe use of your dishwasher The individual sections are laid out to provide you with a step by step guide to all your appliance s functions the texts are easy to understand and are complete with detailed illustrations Recommendations are given for the correct use of the baskets spray arms containers filters washing programs and for operating the controls Following the cleaning instructions provided here will keep your dishwasher s performance at peak levels in the long term This user friendly manual will provide answers to all your questions about use of the dishwasher USER INSTRUCTIONS these consist of recommendations for using the appliance a description of its controls and of the correct cleaning and maintenance procedures User instructions 1 Description of the controls 1 1 Front panel All the dishwasher controls are grouped on the front panel Programming and option selection are only possible with the door closed 1 2 10 3456 9 ON OFF BUTTON SELECTION PROGRAM BUTTONS P1 P5
9. clude the final drying phase see programs table and can be disabled before the program is started Flexi Tabs once selected remains enabled until intentionally disabled When the function is activated opening of the door must not be impeded in any way do not leave anything in the space in front of the door necessary to allow it to open Do not re close the door during automatic opening as this would damage the mechanism Wait for the pushers to retract before re closing the door 3 AMO Ltd X4 C2 15 C O Flexi Tabs Ideal for multi function detergents this option allows washing to be optimised with full benefits from the combined action tablets When this option is activated any salt and rinse aid in the relative containers will not be used If the option is not provided we recommend the use of conventional products separate detergent salt and rinse aid because with conventional washing cycles combined products might create problems such as a white deposit poor drying results and residues left on dishes N B When the salt and rinse aid containers are empty the relative lights will remain on even if the Flexi Tabs option is selected IMPORTANT when no longer required the option must be deactivated by pressing the relative button the light goes out User instructions VEN 7 LU If the water hardness has been set on a value above H3 and the Flexi Tbas option is activated the
10. d in the bottom basket With adjustment in three positions on both sides The sides of the basket must always be set at the same height e Raise the basket by pulling on the top edge 1 to the first or second catch depending on the height required e To lower the basket first release it by pulling the release lever 2 Adjustment is also possible with the basket loaded but in this case when lowering the basket it should be held steady with one hand to avoid knocking the dishes User instructions EN d ji 3 Cleaning and maintenance Before carrying out any work always unplug the appliance from the electrical supply or switch off the all pole disconnection device 3 1 General warnings and recommendations Avoid the use of acidic or abrasive detergents Clean the outer surfaces and door lining of the dishwasher regularly using a soft cloth moistened with water or with a normal detergent suitable for painted surfaces Clean the door gaskets with a damp sponge Periodically once or twice a year it is advisable to clean the tank and gaskets using a soft cloth and water to remove any deposits CLEANING THE WATER INTAKE FILTER The water intake filter A located at the outlet of the water supply tap needs to be cleaned periodically After having closed the water supply tap unscrew the end of the water intake hose remove the filter A and clean it delicately under running water Reassemble filter A in its seat
11. ditions such as dishwasher type and quantity entry temperature etc For this reason it is normal to see the updating during a program increment and decrease of minutes specially in the passage from one phase to the other for example from washing to rinse END PROGRAM The end of the program is indicated by a short signal acoustic and from the End visual notification on DISPLAY By pressing one of the buttons the End visual signal will vanish from the display and the dishwasher is ready to continue a new cycle 1 2 10 3456 9 INTERRUPTING A PROGRAM In order to interrupt a running program it is necessary Pil e to press the START PAUSE for some seconds until when the symbol START PAUSE remains lit on the display confirmation beep At this point it is possible to start the cycle again otherwise TO CHANGE A PROGRAM To change the running program it is necessary e to interrupt the running program see INTERRUPTING A PROGRAM e select the new program Pil e to press again the START PAUSE button O to make start the new program User instructions CEND STOPPING A PROGRAM To cancel a program which is running e Interrupt the program see INTERRUPTING A PROGRAM Pil e Press the START PAUSE button and hold it down the display will show PO and the dishwasher will immediately switch to the end of the cycle and drain the tank during this process the START PAUSE symbol wi
12. e that e The water supply tap is open e The correct amount of detergent has been added to the dispenser The baskets have been correctly loaded e The spray arms are able to rotate freely and without obstruction e The dishwasher door is securely closed 1 2 10 3456 9 LIGHTING Pressing the ON OFF button will start the dishwasher and will lit up the dishwasher pilot light After approximately 3 second from this operation the DISPLAY will be turned on with a visualization that will depend upon the state of the dishwasher PROGRAMMING All the programming operations are possible only with closed door With open door on the DISPLAY will appear SELECTION PROGRAM o o o o o Aes 90 amp o S The program selection is possible through the relative buttons CUCLEIA L By pressing the relative button of desired program see table it will lid up the relative pilot light to confirm that the operation did occurred on the DISPLAY will appear a program duration forecasting h mm User instructions START PROGRAM At this point in order to start the machine it is only enough to press the START PAUSE 6 for some seconds until the symbol START PAUSE D start to flash and confirmation beep is heard From this moment the cycle duration on the DISPLAY 9 starts to decrease This phase that updates itself during the cycle is indicative since it is influenced by the washing con
13. g the funnel supplied with the dishwasher Before replacing the cap remove any salt residues from around the opening e When using the dishwasher for the first time in addition to the salt it is also necessary to add one litre of water to the container e Each time the salt container is refilled make sure that the cap is securely closed The mixture of water and detergent must never penetrate the salt container as this would compromise the operation of the regeneration system In the event of this occurring the warranty will be invalidated e Only use regenerating salt specially formulated for domestic dishwashers If using salt tablets do not fill the container completely CEN User instructions C END e Do not use table salt as it contains insoluble substances which over time may damage the water softening system e When necessary refill the regenerating salt container before Starting the washing program In this way the excess saline solution will be immediately removed by the water the prolonged presence of salt water inside the tank may lead to corrosion Be careful not to confuse the salt and detergent packages adding detergent to the salt container will damage the water softening system ADDITIONAL FUNCTIONS Customizing the consumer parameters available in all programs except the soak program The electronic control system allows personalizing the machine use directly through a programming procedure not d
14. inc or brass these tend to stain e Aluminium dishes items made from anodised aluminium may lose their colour e Silverware silver items may stain e Glass and crystal in general glass and crystal objects can be washed in the dishwasher However certain types of glass and crystal may become dull and lose their clearness after many washings Therefore for these items we recommend using the least aggressive program available e Decorated items the decorated objects available on the market are generally able to withstand washing in the dishwasher although the colours may fade after a great many washes If in doubt as to the fastness of the colours it is advisable to wash just a few items at a time for approximately one month User instructions CEND 2 4 Using the baskets The dishwasher has a capacity of 15 place settings including serving dishes LOWER BASKET The lower basket receives the full force of the lower spray arm and should therefore be used for the toughest items with a heavier degree of soiling All types and combinations of loads are permitted provided that the dishes pots and pans are arranged with all the soiled surfaces exposed to the water jets coming from the bottom Depending on the models the basket may be equipped with some or all of the following accessories Plate racks which can be laid flat when not in use e g to accommodate pans bowls etc To stow the racks flat pull
15. irectly accessible that allows regulate water hardness level 7 8 1 2 10 3456 9 To access the programming environment the appliance must be turned on with the door open Then proceed as follows A press the PROGRAM DELAY button S until the H symbol appears on the display followed by the number currently set e g H3 e press the PROGRAM DELAY button the number of times needed to select the right setting level for the hardness of the water HO H1 H2 H3 H4 H5 N B after few seconds the appliance exits the parameter setting menu automatically 15 CEN User instructions WATER HARDNESS TABLE WATER HARDNESS German degrees UH French Degrees UF seme 0 4 0 7 H 1 NO SALT 5 15 8 25 H1 16 23 26 40 H2 24 31 41 60 H3 32 47 61 80 H4 48 58 81 100 H5 Contact your local water board for information on the hardness of your water supply After adjustment or display of the current setting simply do not touch the button for a few seconds the dishwasher will automatically return to standard mode quitting the adjustment mode 2 2 Using the rinse aid and detergent dispensers The detergent and rinse aid dispensers are situated on the inner part of the door the detergent dispenser is on the left and the rinse aid dispenser is on the right is necessary to add the required amount of detergent to the detergent dispenser The rinse aid on the other hand sho
16. irt i with automatically adjusts the washing 10g 25g ried on residues i parameters as appropriate S0 Hot prewash 5 ULTRA CLEAN Very dirty pans and Wash at 70 70 C dishes even with dried on 2 cold rinses 10g 25g residues Rinse at 70C Dry The ULTRA CLEAN program terminate with an extra anti bacteria rinse that ensures a further reduction in the bacteria level If the temperature falls during this stage of the program e g because the door is opened or due to a power blackout the program lights flash to warn that the anti bacteria effect is not guaranteed If the dishwasher door is open or not properly closed the washing cycle will not start Reference program as per AS NZS 2007 Single phase power supply power setting P1 CONSUMPTION 2 NORMAL Duration for power ECO 2 0 kW Water ini Litres Electricity KWh e 9 45 139 11 7 0 646 User instructions PROFESSIONAL PROGRAMS see professional programs option PROGRAMME NUMBER E SYMBOL 6 ic GLASSES O p fer ional 8 UNIVERSAL t 9 INTENSIVE GC XY Auto e ay Tero fessional gt LOAD CROCKERY AND CUTLERY Special program for washing glasses Very dirty pans and dishes even with dried on residues for fast washing Dishes with normal dirt with some fairly moist residues Very dirty pans and dishes even with dried on residues for fast washing PROGRAM PROGRESS Wash at 50C Cold rinse
17. is comprises two independent sliding pull out tray racks for easier loading unloading of cutlery Various loading systems and configurations are possible For example tea cups can be loaded with the right hand rack set in the low position while the left hand rack or both can be removed to allow large dishes to be put in the top basket User instructions CEND CUTLERY BASKET The basket has removable top grids into which items of cutlery should be inserted to keep them properly spaced and allow water to pass between them effectively The top grids and central lid are in the bag of accessories The central lid functions as a lid only The top grids can be detached and used separately The cutlery should be arranged in an orderly manner inside the basket with the handles pointing downwards Take care during loading to avoid injury from the knife blades The basket is suitable for all types of cutlery except those long enough to interfere with the upper spray arm Ladles wooden spoons and cooking knives can be placed in the upper basket making sure that the knife blades do not protrude from the basket The cutlery basket slides across the dishwasher and can be placed in any position to allow optimal use of the space in the bottom basket 25 CEN User instructions 26 UPPER BASKET It is recommended to load the upper basket with small or medium sized items such as glasses small plates tea or coffee cups shal
18. l into the washing pit they might block hydraulic components or foul the spray arm nozzles It is essential to thoroughly clean the filters according to the above instructions the dishwasher cannot function if the filters are clogged Carefully replace the filters in their seats to avoid damaging the wash pump PROLONGED DISUSE Run the soak program twice in succession Unplug the power cord from the socket Leave the door slightly open in order to prevent the formation of unpleasant odours inside the washing tank Fill the rinse aid dispenser Shut off the water supply tap User instructions VEND BEFORE STARTING THE DISHWASHER AFTER PROLONGED DISUSE e Check that there are no deposits of sludge or rust inside the water pipe if there are allow the water to run from the water supply tap for a few minutes Plug the power cord back into the socket e Reconnect the water intake hose and open the tap again TROUBLESHOOTING MINOR PROBLEMS In some cases it is possible to remedy minor problems by referring to the following instructions If the program fails to start check that the dishwasher is connected to the electrical power supply there is no power failure the water tap is open the dishwasher door is properly closed If water remains inside the dishwasher check that e the drain hose is not kinked e the drain siphon is not obstructed e the dishwasher filters are not clogged If the dishes are n
19. ll flash When the drain procedure ends the end of cycle End message appears on the display 1 2 10 3456 9 In case that the door is opened during the operation to the next door closing it is going to be necessary to start the program as shown in paragraph STARTING THE PROGRAM The program will resume from the point in which it was interrupted In case that the tub temperature is higher than 50 C the program will start about 60 seconds later User instructions 10 Delay PROGRAM DELAY The PROGRAM DELAY button can be pressed to delay the start of the washing program by from 1 to 12 24 hours depending on the model This option allows the dishwasher to be operated at the time of day of the user s choice The first time the PROGRAM DELAY button is pressed the option light comes on and 1 h appears on the DISPLAY The button can then be pressed again to set the delay required 2 h 3 h etc If no button is pressed for a few seconds the DISPLAY shows the time left time remaining to the end of the selected program e g 5 40 duration of the washing cycle program delay When the user confirms the program start read the relative section a prewash will be carried out after which the PROGRAM DELAY set will begin and the time remaining on the DISPLAY will gradually be counted down At the end of the delay set the option light goes out and the washing cycle starts N B It is n
20. low bowls and light objects made from heat resistant plastic If the upper basket is used in the lowermost position it can also be loaded with serving dishes provided they are only slightly soiled LOADING THE UPPER BASKET Load plates facing forward cups bowls etc must always be facing downwards The left side of the basket can be loaded with cups and glasses on two levels In the centre section plates and saucers can be loaded vertically into the supports provided Loading examples User instructions CEN Depending on the models the basket may be equipped with some or all of the following accessories Supports for cups or long objects ladles spoons on the left can be tipped to the vertical position when not in use Long stemmed glass holder on the left to use simply lift and fix onto the hooks provided Cutlery racks on the right designed for knives and teaspoons for teaspoons pull out the sliding support The racks can be tipped to the vertical position when not in use Fixed or movable racks in the middle The movable supports can be fixed vertical resting on the bottom of the basket when not in use or set in the intermediate position as required uei 27 User instructions LM 28 ADJUSTING THE UPPER BASKET The height of the top basket can be adjusted to allow large dishes or pans to be place
21. m persists call the nearest After Sales Centre WARNING any operations performed on the appliance by unauthorised persons are not covered by the warranty and shall be paid for by the user User instructions NEN 4 Troubleshooting The dishwasher is equipped with a self diagnostics system that is capable of detecting and signalling a number of possible faults TABLE OF FAULTS DETECTED BY THE SELF DIAGNOSTICS SYSTEM FAULT Er 01 Er 02 Er 03 Er 04 Er 05 Er 06 Er 07 Er 08 Er 09 DESCRIPTION The anti flooding system where present has been tripped service The water level limitation system has tripped The appliance cannot heat the water The temperature sensor is disconnected The appliance cannot take in the water The appliance cannot drain the water from the tank The dishwasher cannot measure the precise water quantity that has been loaded Problem on the water distribution system to the baskes Water intake system malfunction If an alarm occurs the appliance interrupts the program in progress and signals a fault e Alarms E1 E2 E3 E4 E8 and E9 interrupt the current program immediately e The E5 E6 alarms interrupts the running program once the cause is resolved it will bring bach the execution of the program e The alarm E7 is visualized at the end of the cycle that comes however brought to the end since the operation of the dishwasher is not harmed To reset an alarm is neces
22. ng on model functions more slowly switch on once every 5 seconds REMOVING THE DISHES At the end of the washing program wait at least 20 minutes before removing the dishes to allow them to cool down To prevent any water droplets on the upper basket from falling on the dishes in the lower basket it is advisable to unload the lower basket first and then the upper basket 13 User instructions 14 S 2 Operating instructions Once the dishwasher has been correctly installed prepare for use as follows e Adjust the water softening system e Add the regenerating salt e Add the rinse aid and detergent 2 1 Using the water softening system The amount of scale contained in the water water hardness index can cause whitish staining on the dry dishes which tend to become dull over time The dishwasher is equipped with an automatic softening system which uses a special regenerating salt to reduce the hardness of the water The dishwasher is factory set for water hardness level 3 average hardness 41 60 F 24 31 H When using water of medium hardness the regenerating salt container should be refilled after approximately 20 washing cycles The salt container can hold approximately 1 7 Kg of salt in grains The container is situated at the bottom of the dishwasher After removing the lower basket unscrew the salt container cap by turning it anticlockwise and pour in the salt usin
23. ot being cleaned properly check that the correct amount of detergent has been added there is regenerating salt inside the special container the dishes are being loaded correctly the selected program is suitable for the dish types and their degree of soiling all the filters are clean and positioned correctly e the spray arm nozzles are not obstructed there is no object obstructing the rotation of the spray arms 31 T User instructions a ems Ky Qr 32 If the dishes fail to dry or remain dull check that there is rinse aid inside the special container the rinse aid dispenser setting is correct e the detergent used is of good quality and has not lost its effectiveness for example through incorrect storage with the box left open If the dishes show signs of streaking staining etc check that e the rinse aid dispenser setting is not too high If there are visible traces of rust inside the tank e the tank is made of steel and therefore any rust marks are due to external elements fragments of rust from the water pipes pots cutlery etc Special products are commercially available to remove such marks e check that the amount of detergent being used is correct Certain detergents can be more corrosive than others e check that the cap of the salt container is securely closed and that the water softening setting is correct If after following the above troubleshooting instructions the proble
24. ot possible to select the PROGRAM DELAY option once the cycle has begun Chosen the delay proceed with the program start press the button START PAUSE for same seconds until the START PAUSE symbol start to flash The machine will perform a dish pre washing and when finish the delay program will enter in function as it was first set In case you want to put to zero the delay program within the running program it is necessary Pil e to press the START PAUSE button for some seconds until the START PAUSE D symbol remain lid up on the display e to press the DELAY PROGRAM more times until the reset of the delay program START PAUSE symbol shut off Pil e to press the START PAUSE button to make start the program N B It is not possible to select the delay program when the program have already began User instructions EN c gt Professional OPTIONS The options are controlled by the OPTION ies x nninn SELECTION button Ss Lu Press the button to access the procedure E o En CO confirmed by flashing of one of the OPTIONS 9 Z lights E E N B The PROGRAM DELAY light only comes on when the specific PROGRAM DELAY button is pressed 1 2 10 3456 9 Press the SELECT OPTIONS button Liz again to display the next option To confirm an option press the CONFIRM OPTION button A the light stops flashing and remains on This operation can be
25. relative light flashes warning of a setting error Multi function products are not suitable for use with very hard water this does not prevent the use of the option but the washing results might not be of the best SPREAD HALF LOAD Suitable when there are not many dishes to be washed it saves energy and reduces the program duration Place dishes in both baskets then load the detergent dispenser than less than the normal amount for a full load TO SAVE ON ENERGY AND PROTECT THE ENVIRONMENT e Always try to run the dishwasher fully loaded Do not wash the dishes in running water e Use the washing program that is most appropriate for each type of load e Do notcarry out any preliminary rinsing If available connect the dishwasher to a hot water supply up to 60 TO CUT DOWN ON DETERGENT CONSUMPTION AND PROTECT THE ENVIRONMENT The phosphates contained in dishwasher detergents are harmful to the environment To avoid using excessive amounts of detergent and to save on electricity observe the following e separate the more delicate items from dishes that are more resistant to aggressive detergents and high temperatures e do not pour the detergent directly on the dishes ENERGY MANAGEMENT After 5 minutes of waiting washing cycle completed stopped or set but not started the dishwasher switches to a standby state to reduce energy consumption In this state the dishwasher indicator panel lights or display dependi
26. sary e Open and close the door or turn off and on the machine At this point is possible to program the dishwasher again If the malfunction persists contact your authorised Service Centre 33 G EN iJ User instructions TECHNICAL DATA Width Depth measured flush with the outer edge of the control panel Height depending on models Capacity Water supply pressure Electrical characteristics 34 597 599 mm Free standing 600 mm Semi integrated 570 mm Free standing from 850 mm to 890 mm from 890 mm to 930 mm Semi integrated from 820 mm to 890 mm from 860 mm to 930 mm 15 Standard place settings min 0 05 max 0 9 MPa min 0 5 max 9 bar See rating plate
27. uld only be added as required oF With the exception of the SOAK program before every washing cycle it 16 User instructions CEN ADDING THE RINSE AID The rinse aid helps the dishes dry faster and prevents the formation of scale deposits and staining it is automatically added to the water during the final rinse cycle from the container situated on the inner side of the door To add rinse aid Open the door Rotate the container cap anticlockwise by 1 4 of a turn and remove it Add the rinse aid until the container is full approximately 140 cc The optical level indicator on the side of the cap should be completely obscured Refill the rinse aid when the optical level indicator becomes clear again or when the rinse aid warning light illuminates Replace the cover and turn it in a clockwise direction Use a cloth to remove any spillage of rinse aid which might lead to the formation of excess foam ADJUSTING THE RINSE AID DISPENSER SETTING The dishwasher is factory set for medium water hardness However it possible to change the setting by turning the dispenser s selector to the desired position the amount of rinse aid dispensed is proportional to the selector position To adjust the rinse aid setting rotate the dispenser cap through a quarter turn in an anticlockwise direction and remove it Then use a screwdriver to rotate the rinse aid selector to the desired position Replace the cap turning it
28. xcessive amount is wasteful and does not improve the washing results e The market offers liquid and powder detergents with differing chemical compositions which may contain phosphates or be phosphate free but contain natural enzymes Detergents containing phosphates are more effective against grease and starch at temperatures above 60T Enzyme detergents on the other hand are also effective at lower temperatures from 40 to 55C and are more easily biodegradable With enzyme detergents it is possible to obtain at low temperatures comparable results to those which can only be achieved at 65T using traditional detergents For the safeguarding of the environment we recommend the use of phosphate and chlorine free detergents User instructions CEN D The introduction of detergent into the rinse aid dispenser even in liquid form will damage the dishwasher 2 3 General warnings and recommendations Before using the dishwasher for the first time it is advisable to read the following recommendations concerning dish types to be washed and their loading There are generally no constraints on the washing of domestic dishes but in certain cases it is necessary to take their characteristics into account Before loading the dishes into the baskets it is necessary to e remove coarse food remains e g bones fish bones etc which may clog the filter or damage the wash pump e soak any pots or pans with burnt on food remains
Download Pdf Manuals
Related Search