user manual heartway medical products co., ltd.
Contents
1. 40 SAFETY INSTRUCTION General Do not make a sharp turn or a sudden stop while Do not ride your scooter in traffic riding your scooter Do not attempt to climb curbs greater than Do not leave your hands and legs off the scooter limitation show on Technical Specification when driving Do not ride your scooter during snow order to Do not allow unsupervised children to play near avoid accident on slippery road this equipment while the batteries are charging Warning Don t operate your scooter for the first time without completely reading and understanding this user manual 1 Don t operate scooter on public streets and roadways Be aware that it may be difficult for traffic to see you when you are seated on the scooter Obey all local pedestrian traffic rules Wait until your path 15 clear of traffic and then proceed with extreme cautions 2 To prevent injury to yourself or others always ensure that the power 15 switched off when getting on or off of the scooter 3 Always check that the drive wheels are engaged drive mode before driving Do not switch off the power when the scooter is still moving forward This will bring the chair to an extremely abrupt stop 4 Do not use this product or any available optional equipment without first completely reading and understanding these instructions If you are unable to understand the warnings cautions or instructions2. ERROR Usage Condition Flicker Frequency Controller 1 message LED Flicker Flicker Flashing Opposite to controller message 24 Status Battery needs charge soon Low voltage needs charge now Over voltage Over current Park Brake lost or faulted Accelerator not align center Accelerator broken or faulted Motor broken or faulted Others 1 9 gt Power on Self Test When scooter power on the control panel will go through a self test routine the backlight Initial Status and all LCD segments will be tuned on for 3 seconds then switch automatically to the general operation mode ODO 1 Temperature Sensor Operation Feature Temperature detected by temperature sensor NTC from transformation with signal 20 C 50 C TEMP Display Range 4 F 122 F 88 When display degree stand for Celsius thermometer Display Switch Button When display F degree stand for Fahrenheit thermometer 1 4 Reverse Indicator ITEM SPECIFICATION Take exterior forward backward switch as determinant signal When switch direct to forward no symbol on LCD Reverse When switch direct to backward symbol flashing on LCD Flicker Frequency 25 1 5 Buttons ITEM SPECIFICATION Displ Mod Press for 3 seconds to reset TRIP at 00 0 Press and simultaneously for more than 2 seconds to ente
3. 89 SEAT SLIDING RAIL 5 SEAT BASE 82 SEAT SLIDING POST 83 SAFETY BELT 34 PEDAL 37 85 REAR LIGHT 88 BRACKET FOR FENDER 87 FF COVER BRACKET 88 FRONT BUMPER BRACKET 89 WIGWAG SPACER FOR POTENTIOMETER 1 FRAME 42 TILLER RAM MECHANISM 43 RD SHROUD 44 LIGHT SEAT 45 STEM 46 POTENTIOMETER COMBINATION 47 SUSPENSION BRACKET 48 TRIANGLE LIGHT 49 TRANSAXLE 54 SPEEDOMETER LINE 51 A ARM BRACKET S12T BOM LIST DRAWING 1 INDICATOR LIGHT FUL REAR VIEW MIRROR 2 INDICATOR LIGHT FUR 49 CONTROL PANEL 3 FD COVER 20 BATTERY 4 HANDLE CAP 93 BODY FRAME 5 TILLER FF COVER 22 ALUMINUM RIM 6 RUBBER DUST COVER 23 TYRE T TILLER FR COVER 94 INNER RIM 8 DRINK BRACKET 25 BATTERY UPPER SHROUD 9 HEAD LIGHT FDL 26 SUSPENSION 10 HEAD LIGHT FDR 27 SIDE COVER L FLOOR 28 BATTERY LOWER SHROUD 12 INDICATOR LIGHT BRACKET 09 CAPTAIN SEAT ASM 43 LAMP BASE 80 SEAT SLIDING RAIL I4 CARPET 1 SEAT BASE 45 FENDER 32 SEAT SLIDING POST 46 REAR BUMPER 83 SAFETY BELT 17 SIDE COVER R 38 52 SPEED SENSOR gt 7 38 REAR LIGHT 38 BRACKET FOR FENDER FENDER 38 FR COVER 89 WIGWAG 49 SPACER FOR POTENTIOMETER 43 TILLER FRAME 42 TILLER RAM MECHANISM 43 RD SHROUD LIGHT SEAT 45 FORK 48 POTENTIOMETER COMBINATION 47 SUSPENSION BRACKET 48 TRIANGLE LIGHT 48 TRANSAX
4. Defected 2 SPECIFICATION BALS Charging Method Constant current two stage constant voltage Battery Application 24V Lead Acid Rechargeable Battery 26Ahr 75 Ahr Short Circuit Protection l 2 Reverse Power Protection Output Detection l 3 Overheat Protection 4 Charging Plug Protection Color Be 27 3 OPERATING INSTRUCTION 1 Make sure the battery charger output voltage 1s the same as the connecting battery 2 Plug in the power cord LED indicates green flash when AC power on 3 Connect the battery charger to the battery 4 Start charging please refer to 4 LED INDICATION 4 LED INDICATION 1 Green Flash Power 2 Charging Flash Pre charge 4 Green amp Orange Flash Charged 80 5 Green Full charged Floating charge 5 6 Red Flash Defect 5 TROUBLE SHOOTING 1 If green indicator 15 off Check AC input If it works functionally the battery charger may be defective 2 If green indicator keeps flashing and cannot turn to charging indication Check if the battery connector is connected successfully e Check if there is any short circuit on the output connection The battery charger may be defective if the battery connection works functionally 3 If red indicator keeps flashing Check if the battery connection 15 reversed e Check if there is any short circuit on the output connection Check if the environm
5. 1118 1012 724 aen LUTTE in ELE ra F rer i mimm LL I ijas 1 ne M Ly f Eri a a charger moche muros bas hey mee b prf le b peed TW sare 4 T speed 22 1007 thre 0 1007 tro wiper 22 1007 amp brake 107 8 100 1007 MS 1007 p 8 zu 2 8 heehee 1007 Berane 8 8 pF 11 aJ a ly 1 redi 1 Ha tack B 1 um 4 HEARTWAY S PATENT A brand new double A arms suspension system S12 BOM LIST DRAWING T INDICATOR LIGHT FUL 2 INDICATOR LIGHT FUR 3 FD COVER 4 HANDLE CAP 5 TILLER FF COVER 6 RUBBER DUST COVER T TILLER FR COVER B DRINK BRACKET 9 HEAD LIGHT FDL 0 HEAD LIGHT FDR FLOOR 2 BUMBER 3 LAMP BASE I4 CARPET 45 46 REAR BUMPER 7 SIDE COVER REAR VIEW MIRROR 49 CONTROL PANEL 20 BATTERY BODY FRAME 22 ALUMINUM RIM 23 TYRE 24 INNER RIM 25 BATTERY UPPER SHROUD 98 SUSPENSION 7 RD SIDE COVER 28 BATTERY LOWER SHROUD 29 CAPTAIN SEAT ASM
6. Power Saving mode c Sleep mode all functions closed 1 2 2V gt WIP gt 2 8V 100 Full power 2 2 2V lt WIP gt 2 8V 100 Full power 3 Full Half power switch at real time 4 The determination of Reversing Mode need to consider the motor direction and panel setting 1 Loop Load 24V 50W max 2 With short circuit and overload protection T Back up Lamp control Take exterior back up lamp switch as determinant signal Operation Feature 1 Switch on off the head light by pressing button once then LED will turn on off simultaneously 2 LCD backlights turn on turn off with head light When motor changes from act go forward to stop the lamp reinstated after flashing Control Mode for 3 sec Brake lamp Mode Determine as Reversing Mode back up lamp keep flashing Reversing lamp Mode Reverse warning sound can be set by panel Turn on Turn off While a KEY OFF b Charging Mode c Sleep Mode all functions closed Usage Condition Brake lamp amp Reversing lamp Mode won t be limited by Back up lamp switch on off Flicker Frequency 1 2 2V gt WIP gt 2 8V 50 Half power 2 2 2V lt WIP gt 2 8V 100 Full power Determinant Condition 3 Full Half power switch at real time 4 The determination of Reversing Mode need to consider the motor direction and panel setting 1 Loop Load 24 50 2 With short circuit and overload pr
7. all power scooters like the 512 S12T 5125 512 Power scooters may as susceptible to electromagnetic interference EMI which 1s interfering electromagnetic energy emitted from sources such as radio stations TV stations amateur radio HAN transmitter two way radios cellular phones and alarm systems of shops The interference from radio wave sources can cause the power scooter to release its brakes move by itself or move in unintended directions It can also permanently damage the powered scooter s control system The intensity of the EM energy can be measured in volts per meter V m Each powered scooter can resist EMI up to a certain intensity This is called immunity level The higher the immunity level the greater the protection At this time current technology is capable of providing at least 20 V m of immunity level which would provide useful protection against common sources of radiated EMI Following the warnings listed below should reduce the chance of unintended brake release or powered scooter movement that could result in serious injury Do not turn on hand held personal communication devices such as citizens band CB radios and cellular phones while the powered scooter is turned on 2 Be aware of nearby transmitters such as radio or TV stations and try to avoid coming close to them 3 If unintended movement or brake release occurs turn the powered scooter off as soon as it 15 safe 4 Be aware that ad
8. scooter Contact with tools can cause electrical shock and do not connect an extension cord to the AC DC converter or the battery charger Do not attempt to lift or move your scooter by any of its removal parts such as the armrests seats or shroud When climbing an incline don t drive at an angle up the face of the incline Drive your scooter straight up the incline This greatly reduces the possibility of a tip or a fall Don t climb a slope steeper than the scooter s limitation Don t attempt to have your scooter proceed backward down any step curb or other obstacle This may cause the scooter to fall or tip Always reduce your speed and maintain a stable center of gravity when cornering sharply Don t corner sharply when driving scooters at higher speeds Operating in rain snow salt mist conditions and on icy or slippery surfaces may have an adverse affect on the electrical system Never sit on your scooter when it is being used in connection with any type of lift or elevation product Your scooter is not designed with such use in mind and any damage or injury incurred from such use is not the responsibility of Heartway Modifications Heartway Medical Product has designed and engineered power scooters to provide maximum utility However under no circumstances should you modify add remove or disable any part or function of your power scooter Personal injury and damage to the power chair may result D
9. 4 Clock Meter SPECIFICATION Initial Setting Value Hour Min mode 12 00 Hour Display range AM12 00 PM11 59 x E EE LL B When Hour is between 1 and 9 o clock displayed at 1 9 5 gt Odometer Operation Features Odometer detected by the signal of Opto Coupler then converts into distance l l km h means the odometer displayed as kilometer Display Switch Button i mph means the odometer displayed as mile 1 Display Range 00000 99999 Accumulative Display 1 Hn ODO ml LI km 2 Once the total mileage up to 99999km 62149mile 99999 609mile the counter will restart from 00000 1 Display Range 00 0 99 9 TRIP Counter 111 mile J 1 1 1 km 2 When over 99 9km display stop counting won t restart from 00 0 1 Odometer indication display on ODO mode when Power On then switch to TRIP mode Operation status after 5 seconds 2 TRIP can be reset to 00 0 21 6 Headlight Control ITEM SPECIFICATION Take exterior headlight switch as determinant signal Operation Feature 1 Switch on off the head light by pressing button once then LED will turn on off simultaneously 2 LCD backlights turn on turn off with head light When motor stop the modulation down to 3046 Headlight When motor act 10046 output power Headlight Usage Condition While a KEY OFF b
10. 4 hours a week if the power chair or scooter has not been used This 15 to make sure that the electrolyte 15 always at the top level If the battery cannot be charged Orange light cannot turn to Green or if the Orange light turns to Green immediately please check it with the technicians The battery may be defective The voltage difference between the two batteries on a power unit cannot be more than 0 5 V the battery case should be inspected for cleanliness and evidence of damage If the charger indicates red light please kindly check if the charger is defected or if the cable wiring connection is poor Please keep the battery Gand connectors clean otherwise the charging condition will be poor 30 SCOOTER MAINTENANCE amp REPAIR Your power scooter is designed for minimal maintenance However like any motorized vehicle it requires routine maintenance To keep your Vita Scooter for years of trouble free operation we recommend you follow the following maintenance checks as scheduled DAILY CHECKS Visual check on the conditions of tires 2 Inspect the battery condition meter on the controller to determine if batteries need to be charged WEEKLY CHECKS 1 Your power scooter comes with standard pneumatic tires If your power scooter comes with optional air tires make sure to maintain the pressure of the tires between 30 35 psi MONTHLY CHECKS 1 Visually inspect the controller harnesses Make sure that they are n
11. 5 x65 3 13 x4 13 x4 m 13 x4 m 13 x4 8 13 13 8 18 35km 45km 25km 45km CHARGER TYPE SAmp Off 8Amp Off 8Amp Off Board120 240 Board120 240 Board120 240 Board120 240 Volt 50 60Hz Volt 50 60Hz Volt 50 60Hz Volt 50 60Hz 120Amp 120Amp 140Amp 200Amp 4 Pole 700W 4 Pole 900W WEIGHT W BATTERY 135kes 300 1 10kgs 242 Ibs 1360mm 510mm 10mm 510mm Omm 460mm 180mm 80mm mm 80 40mm 320mm 320mm 20 512 5125 DIMENSION 10 S12T DIMENSION 11 512X DIMENSION A Q i 1 1 1 5 une 12 COMFORT ADJUSTMENT Adjustments for Seating Comfort Press the bottom to adjust the height of the headrest The flip up armrest height can be adjusted by turning the adjustment dial Adjust the seat back lever for seating back angle Turn the swivel lever downwards to rotate the seat Push front lever upwards to move the seat forward and backward 13 Driving and braking Optional hand brake lever Reverse For driving please pull the right throttle lever forward or the left throttle lever backward Please release the throttle lever to stop the scooter In the center position the magnetic motor brake system works also as a parking brake Optional there is a hand brake system available For safety when rolling at free wheel mode down slope the automa
12. LE 60 SPEEDOMETER LINE 67 CONTROLLER 4 8 512 512 BOM LIST DRAWING 1 INDICATOR LIGHT FUL 2 INDICATOR LIGHT FUR 3 FD COVER HANDLE CAP S TILLER FF COVER 6 DUST COVER T TILLER FR COVER DRINK BRACKET 9 LIGHT FDL HEAD LIGHT FDR 47 FLOOR 12 FRONT BUMBER 3 LAMP BASE 4 CARPET 5 FENDER REAR BUMPER 17 SIDE COVER R 18 REAR VIEW MIRROR 9 CONTROL PANEL 0 BATTERY 2 BODY FRAME 22 ALUMINUM RIM Q3 TYRE 24 INNER RIM 25 BATTERY UPPER SHROUD 26 SUSPENSION 7 RD SIDE COVER BATTERY LOWER SHROUD 99 CAPTAIN SEAT ASM 89 SEAT SLIDING RAIL 81 SEAT BASE 82 SEAT SLIDING POST 83 SAFETY BELT PEDAL 39 85 REAR LIGHT 88 BRACKET FOR FENDER COVER BRACKET 88 FRONT BUMPER BRACKET 89 WIGWAG 40 SPACER FOR POTENTIOMETER 8 FRAME 42 RAM MECHANISM 43 RD SHROUD 44 LIGHT SEAT 45 STEM 46 POTENTIOMETER COMBINATION 47 SUSPENSION BRACKET 48 TRIANGLE LIGHT 49 TRANSAXLE 50 SPEEDOMETER LINE 61 A ARM BRACKET 62 WARRANTY DECLARATION Quality Warranty Declaration Products are to be fit for purpose and of excellent quality and performance For valid warranty claims Heartway will at their discretion replace repair refund items mutually agreed to be defective Heartway s Warranty as Following Frame Two year limited warranty gt Controller
13. USER MANUAL HEARTWAY MEDICAL PRODUCTS CO LTD NO 6 ROAD 25 TAICHUNG INDUSTRIAL PARK TAICHUNG TAIWAN 408 PUBLISHED SEP 6TH 2012 VERSION 1 PART NO 70030175 CONTENTS INSTRUCTION E 2 ELECTOMAGNETIC 7 25 SPECIPICATIONS 9 A PRODUCT DIMENSION erii AE aaa 10 3 COMBORT ADJUSTMENT estet daa ES IU EE Cose 13 6 OPERATION OF CONTROL odo Mo eR Pu vum vs 16 7 CHARGING INSERUC THON Ee E RUUR RUN 27 9 BATTERY INSTRUCTION amp 5 30 9 SCOOTER MAINTENANCE REPAIR iocueuee itte ER ER SE eue r2 E UE 31 10 TROUBLESHOOTING amp 33 PC TROUT DIAGRAM een p ES I SRI EARN 36 12 HEARTWAY S PATENT SUSPENSION 5 36 13 BOM LISTDRAWING 555 TUI AR EPOR 37 14 WARRANTY DECLARATION 2 i
14. act your service agent operated Check the position of the switch or lever LEE The freewheel switch is activated or the manual brake disengagement mechanism is 6 Bar S drive is being inhibited from driving Inhibit 2 is active This may be because the battery charger connected or the seat is not in the driving position 7 Bar A throttle fault is indicated Make sure that the throttle is in the rest position before switching on the scooter 8 Bar A controller fault is indicated Make sure that all connections are secure saa 5 9 Bar The parking brakes have a bad connection Check the parking brake and motor ssa 1 Connections Make sure the controller connections are secure 10 Bar An excessive voltage has been applied to the controller This is usually caused by a poor ssa eee battery connection Check the battery connections 35 CIRCUIT DIAGRAM MX white 1115 1413 10115 462 1082 pe 1175 paci 1115 Pree fo He gi ey reduce Controller 110A LE TW nif HA TW umm signa k rake 24 671 297 ies tam ob vw Fl 4 Mak guo uU ans WEY He
15. contact a healthcare professional the dealers or technical supports before attempting to use this equipment otherwise injury or damage may occur 10 11 12 15 14 15 16 17 18 19 20 There are certain situations including some medical conditions where the scooter user will need to practice operating the scooter in the presence of a trained attendant A trained attendant can be defined as a family member or care professional especially trained in assisting a scooter user in various daily living activities Consult with your physician if you are taking any medication that may affect your ability to operate your scooter safely Do not attempt to lift or move a power scooter by any of its removable parts including the armrests seats or shrouds Personal injury and damage to the power chair may result Never try to use your scooter beyond its limitations as described in this manual Please do not sit on your scooter while it is in a moving vehicle Keep your hands away from the wheels tires while driving scooters Be aware that loose fitting clothing can become caught in the drive tires Consult your physician if you are taking prescribed medication or if you have any certain physical limitations Some medications and limitations may impair your ability to operate scooters in a safe manner Be aware when the drive mode is unlocked or locked Don t remove anti tipper 1f there is any tipper equipped with the
16. ding accessories or components or modifying the powered scooter may make it more susceptible to interference from radio wave sources Note It is difficult to evaluate the effect on the overall immunity of the powered scooter 5 Report all incidents of unintended movement or brake release to the powered scooter manufacturer and note whether there is a radio wave source nearby TURN OFF YOUR POWERED SCOOTER 5 SOON AS POSSIBLE WHEN EXPERIENCING THE FOLLOWING Unintentional scooter movements Unintended or uncontrollable direction Unexpected brake release The FDA has written to the manufacturers of power scooters asking them to test new products to be sure they provide a reasonable degree of immunity against EMI The FDA requires that a powered wheelchair should have an immunity level at least 20 V m which provides a reasonable degree of protection against more common sources of EMI The higher the immunity level the greater the protection Your powered scooter has an immunity level of 20 V m which should protect against common sources of EMI Warning The scooter itself can disturb the performance of the electromagnetic fields such as emitted by alarm systems of shops 512 5125 512 TECHNICAL SPECIFICATIONS SI2T 512 VITA VITA SI2S VITA WEIGHT CAPACITY 160 05 350 160 05 350 160 5 350 l60kes 350 EAT TYPE SIZE A2 160kgst 330mmxl 00m 330mmx1 00m 380mmx 160m m 13 x5 m 13 x5 mia ky m 1
17. ent temperature is too low 0 C e The battery charger may be defective if the red indicator still keeps flashing 4 Charging indicator orange cannot turn to green e The battery might be defective please stop charging and have the battery be repaired 5 If the charging indicator orange turns to green fully charged immediately e The battery may be in well charged condition The battery may be defective if the battery is not fully charged 26 6 CAUTION 1 Before using the battery charger read all instructions and cautionary markings 2 Use the battery charger in a well ventilated area 3 To avoid the risk of injury charge only lead acid or gel cell type rechargeable batteries 4 Please turn off the power after charging Charging Port Important Always charge your batteries in well ventilated areas The charger is intended for indoor use only Please protect it from the moisture For maximum performance it is recommended that you replace both batteries at the same time if the batteries are weak If the scooter will not be used for a long period of time arrange to have the batteries recharge at least once every month to avoid deterioration of the batteries 29 BATTERY INSTRUCTION amp MAINTENANCE Read through the charger operating instruction before using it Make sure you charge the battery every time after you use the power chair or scooter Charge the battery at least 2
18. ight indicator flashing simultaneously Red LED Malfunction Code 7 Segment display 14101 Warning symbol Red LED Power on Scan LED turn on TEMP Gauge C and F modes Reverse Light Reverse symbol flashing I Left Indicator control Right Indicator control 80 High low speed switch Parking 16 Headlight Q MODE SET S Back up Light LED Indicators Right amp Left indicator Green gt Parking light Red Warning light Red Back up lamps Yellow gt Headlight Blue LCD Backlight LED White Comer CONT 20PIN AMP Meter Angle at 30 of elevation while scooter assembly LCD orientate to six o clock Handle Cover 2 General Characteristic Performance Test 20 5 C SPECIFICATION RESULT 2 1 Headware Circuit Consuming Current Dynamic 200 mA max Backlight and LED light status mA 24 0V ni Static 5 mA Key OFF status 17 gt Speed Sensor and Display ITEM SPECIFICATION Operation Features Speed detection by speed sensor from transaxle with conversion at 1800rpm equal to 60km h Digital Range 0 0 99 Display Switch Button Initial setting at km h switch to MPH by MODE and buttons 2 gt High Low Turn Speed ITEM SPECIFICATION Operation Features 1 Switch High Low speed by pressing button Cr once TRN as control signals Press one time High speed lt lt gt gt Low speed wi
19. o not modify your power scooter in any way not authorized by Heartway Do not use accessories if they have not been tested or approved for Heartway products 5 Get to know the feel of your power scooter and its capabilities Heartway recommends that you perform a safety check before each use to make sure your scooter operates safely Inspections prior to using your power scooter If equipped with pneumatic tires please check for proper tire inflations Please check all electrical connections and make sure they are tight and not corroded Please check all harness connections and make sure they are secured properly Please check the brakes Weight limitation Please refer to the specifications table for weight capacity information Power scooter 15 rated for a maximum weight capacity Stay within the specified weight capacity for your scooter Exceeding the weight capacity voids your warranty Heartway will not be held responsible for injuries or property damage resulting from failure to observe weight limitations Don t carry passengers on scooters Carrying passengers on scooter may affect the center of gravity resulting in a tip or a fall Tire inflation l If your scooter is equipped with pneumatic tires it is necessary to check the air pressure at least one time a week Proper inflation pressures will prolong the life your tires and ensure the smooth operation while riding Do not unde
20. ot frayed cut or have any exposed wires SEMI ANNUAL CHECKS 1 Check the motor brushes We recommended that your authorized dealer inspect the brushes every six months or sooner if your power scooter is not operating smoothly If inspection determines excessive wear on the brushes they must be replaced or motor damage will result 3l Warning Failure to maintain the brushes could void the power scooter warranty To inspect or replace the motor brushes Unscrew the motor brush caps 2 Remove the brushes 3 Inspect the brushes for wear 4 Replace the brushes if necessary New Motor Brush Motor Brush caps Inspect the state of the battery terminals every six months Make sure that they are not corroded and the connections are tight Periodically apply a thin film of petroleum jelly on the surface of terminals to guard against corrosion CHECKS Make sure to keep the controller clean while protecting it from rain or water Never hose off your power scooter or place it in direct contact with water Keep wheels free from lint hair sand and carpet fibers Visually inspect tire tread If less than 1mm 1 32 please have your tires replaced by your local dealer All upholstery can be washed with warm water and mild soap Occasionally check the seat and back for sagging cuts and tears Replace if necessary Do not store your scooter in damp or humid conditions as this
21. otection 8 9 10 Indicators and Parking Lamp Control ITEM SPECIFICATION Operation Feature Take exterior left right indicators and parking lamps switch as the determinant signal ES C i Press button once the right indicator and turn off left indicator and flashing warning sound act Press again to turn off left indicator Control Mode 5 5 5 Left direction lamp s a Press once the right indicator turn off left indicator and p 1 m flashing warning sound act Press D again to turn off left indicator Right direction lamp 25 215 1 1 Press button once turn on right left indicators and flashing warning sound act press again to turn off the Parking lamp function Parking lamp Usage Condition While a KEY OFF b Charging Mode c Sleep Mode all functions closed Warning Sound Frequency One short sound per second 1 Load circuit for left direction light 24V SOW max Remarks 2 Load circuit for right direction light 24 50 max 3 With short circuit and overload protection 23 1 1 Malfunction Message Take the connector pin KEY of controller as determinant signal then converts it into Operation Feature disitalc de When the controller send out an error message red LED flashing with controller signal at same time the Error message code will show on LCD
22. powered by RHINO will charge the batteries when traveling down slopes decelerating Excessive charging in this manner may cause this fault Turn the scooter power off and then back on again The scooter has drawn too much current for too long possibly because the motor has been over worked jammed or stalled Turn the scooter power off leave for a few minutes and then turn the power back on again The controller has detected a shorted motor Check the loom for shorts and check the motor Contact your service agent Check that the park brake release lever is in the engaged position The park brake coil or wiring is faulty Check the park brake and wiring for open or short circuits Contact your service agent Out of Neutral Drive at Power Up inhibited 7 Speed Pot Drive Error inhibited 8 Motor Volts Drive Error inhibited 9 Other Internal Drive Errors inhibited 10 Push Too Fast Drive fault inhibited Note Throttle is not in neutral position when tuning switch key on Return throttle to neutral turn power off and back on again Throttle may need to be re calibrated Check throttle wiring The throttle or its wiring is faulty Check for open or short circuits Throttle may not be correctly set up Contact your service agent The motor or its wiring is faulty Check for open or short circuits Contact your service agent Contact your service agent scooter has been pushed faster than the
23. programmed Push Speed parameter when the Park Brake Release function has been operated The scooter has been pushed faster than the programmed Rollaway Speed parameter when the Park Brake has been mechanically released Turn the scooter off and then back on again If you experience any technical problems it is recommended that you check with your local dealer before attempting to troubleshoot on your own The following symptoms could indicate a serious problem with your power scooter Contact your local dealer if any of the following arises 1 Motor noise 2 Frayed harnesses 3 Cracked or broken connectors 4 Uneven wear on any of tires 5 Jerky motion 6 Pulling to one side 7 Bent or broken wheel assemblies 8 Does not power up 9 Powers up but does not move 34 PG S Drive controller PG D Drive Controller continuously monitors the operating conditions of your scooter If it detects a problem it will indicate with error message by flashing light You must count the number of the flash and see the list to check what kind of error has happened according to the number S Drive Controller Troubleshooting The battery needs charging or there is a bad connection to the battery Check the connections to the battery If the connections are good try charging the battery There is a bad connection to the motor Check all connections between the motor and the controller The motor has a short circuit a battery connection Cont
24. r Setting Mode then Hour MIN start flashing 1 When Hour flashing Press to increase of number then press toenter Setting Mode of MIN 2 When MIN flashing Sening Node Press to increase of number then press to enter Setting Mode of km h amp mph 3 When km h or mph flashing Press to choose km h or mph type then press to enter Setting Mode of C F 4 When C or F flashing Press to choose C or F Under setting mode if below situations happened will auto save the last setting value then from i escape to general operation mode 1 No any operation of ADJ button for 20 sec 2 Press MODE and at same time for more than 2 sec 1 Hour Min km h or mph C or F offer Cyclical Switch function 2 When adjusting Hour Min press to increase number if press for Operation Status more than 2 seconds the number will increase continuously until button released setting value with Cyclical Switch function only 2 seconds from 0 to 9 If Hour less than 10 denary 0 doesn t display Remarks Button tones one short sound 26 CHARGING INTRUCTIONS APPEARANCE Battery Charger Instruction Power Cord OQ Output Plug to Battery G Indicator Green Flash Power On Orange Flash Pre Charge Orange Charging u Green amp Orange Flash Charged 8090 Green Full Charged Red Flash
25. r inflate or over inflate your tires It is critically important that 30 25 psi 2 2 4bar tire pressure be maintained in pneumatic tires at all times Inflating your tires from an unregulated air source could over inflate them resulting in a burs tire Temperature Some of the parts of power scooter are susceptible change temperature The controller can only operate in temperature that ranges between 25 50 At extreme low temperatures the batteries may freeze and your power scooter may not be able to operate In extreme high temperatures 1 may operate at slower speeds due to a safety feature of the controller that prevents damage to the motors and other electrical components ELECTROMAGNETIC INTERFERENCE EMI The rapid development of electronics especially in the area of communications has saturated our environment with electromagnetic EM radio waves that are emitted by television radio and communication signals These EM wave are invisible and their strength increases as one approach the source electrical conductors act as antennas to the EM signals and to varying degrees all power wheelchairs and scooters are susceptible to electromagnetic interference EMI The interference could result 1n abnormal unintentional movement and or erratic control of the vehicle The United States Food and drug Administration FDA suggests that the following statement be incorporated to the user s manual for
26. s One and a half year limited warranty gt Electronic Components and Charger One year limited warranty Warranty Exclusion The following items are not covered by warranty lt Motor brushes lt Wheel Tires lt Pads lt Seat Cushion lt Fuses Bulbs lt Tiller Cover lt Rear Shroud lt Front Shroud lt Batteries and Consumable parts Any damage or defect of any nature occurring from the misuse abuse of the product improper operation or improper storage 15 not to be covered The warranty 15 to start from the date of arrival of our products rd Y HEARTWAY HEARTWAY MEDICAL PRODUCTS CO LTD NO 6 ROAD 25 TAICHUNG INDUSTRIAL PARK TAICHUNG TAIWAN R O C 408 40
27. th memory storage 2 Take exterior turn switch as determinant signal TRN as control signals Symbols on LCD symbol means High Speed symbol means Low Speed Flicker Frequency 18 3 Power Indication ITEM SPECIFICATION Scale Bar Remaining and Flashing Low power Warning LED Flashing Warning Flicker Frequency 1 Scale status only decrease won t increase 2 When the remaining capacity was less than 30 warning sound two short sounds act at 5 seconds intervals While a Key Off b Charging Mode c Sleep Mode warning sound released 19 5 Renaming Voltage V Scale Bar Capacity 90 5 Fe f E Charge Indication E E E gt gt gt nn f IN IN ma RN Increase Frequency 1 Scale status only decrease won t increase 2 Take the PIN3 CH3 of charger as determinant signal enter Charging Mode when CH3 grounding L not only KEY ON or KEY OFF Operation Character R k Above scale bar status only for reference must take the indicator of charger as the precise emarks diagnosis 20
28. tic brake will take action if the transferring speed is more than 30 of the scooter s maximum speed Please be noted that the scooter will be at free wheel mode when the motor is disengaged To use the parking brake you must move and lock the lever into the engaged position Disengaged Free Wheel 14 Tiller Positioning Press down the lever and move it to your preferred position The adjustment of rear suspension system The softness of the rear suspension system 15 adjustable There are altogether 5 level of adjustments It 15 applicable with around 120kg and each level can bear up to 13 5 kg Tooling bar 15 OPERATION OF CONTROL PANEL LCD Liquid Crystal Display Power Scooter Control Panel TN Type Model Functions Buttons 2 3 4 5 6 7 8 9 gt LCD Liquid Crystal Display Power Indicator Battery remaining capacity and charging indicator 6 squares Battery Icon Clock Hour Minute Second display and setting Speed Sensor 7 Segment display 2 5 digits 1 decimal km h mph symbol High Low Turn Speed Indicated as and symbols Odometer ODO 99999km TRIP 99 9 Headlight Power saving mode Blue LED Back up Lamps Brake Reverse modes Orange LED Right Indicator Flash mode Green LED Left Indicator Flash mode Green LED Parking Lamp Including Reverse Mode left indicator and r
29. will lead to mildew and rapid deterioration of the upholstery parts All moving mechanism will benefit from simple lubrication and inspection Lubricate using petroleum jelly or light oil Do not use too much oil otherwise small drips could stain and damage carpets and furnishings etc Always perform a general inspection of the tightness of all nuts and bolts TROUBLESHOOTING amp FAULT REPAIR RHINO controller Your scooter 15 fitted with Rhino controller which continuously monitors the operating conditions of your scooter If it detects a problem it will indicate with error message by flashing light on the power ON OFF light You must count the number of the flash and see the list to check what kind of error has happened according to the number Number of Flashes 1 Fault Battery needs recharging Battery voltage too low Battery voltage too high Current limit time out Brake fault Impact Scooter Will drive Drive inhibited Drive inhibited Drive inhibited Drive inhibited on 33 Notes Battery charge 15 running low Recharge the batteries as soon as possible Battery charge 15 empty Recharge the batteries If the scooter is left off for a few minutes battery charge may recover sufficiently to allow driving for a short period of time Battery charge 15 too high If a charger is plugged in unplug it or turn the Charge Run switch to Run Scooters
Download Pdf Manuals
Related Search