User`s Manual
Contents
1. J F N O M G Professional DS 1 Tattoo Power Supply Device control l e To turn on or shut down the device press and hold button more than 3 seconds e Factory Menu Options After switch on devise displays PS 1 picture Press and hold buttons UP DOWN while picture are displayed to clear all memory records or button DOWN to change sound options and MENU SCROLL speed there are 4 sound options change them by clicking UP or DOWN buttons and apply with O button or press Mode button to enter to MENU SCROLL speed options AN Start Stop oe FN Mode o O View FootSwitch rn 4 Clear EA SEA e After start device loads memory record which was active before the device was turned off e Mode switching between memory records e KN Mode saves parameters in current memory record e FN FootSwitch changes footswitch mode o trig trigger mode maintained o Stat static mode momentary No footswitch mode to use this mode You don t need any footswitch Firstly choose trig trigger mode Hold FN button for 3 seconds tattoo machine starts working to turn it off just do the same hold FN button for 3 seconds e KFN Menu changes tattoo machine type Std standart coil machine U voltage F machine speed Hz d duty cycle displays percents shows how long contact is closed in comparison with open contact during2. one armature bar hit Hz FT displays average number of contact miss in each working cycle o rot rotory machine U voltage When pressing the footswitch voltage applies with smooth increase to avoid current throw which reduces machine live e View selects displayed parameters U F d FT e UP or DOWN changes voltage e EFN Timer switching between normal and timer modes Time counting could be started or stopped with Start Stop button Clear button resets timer Time is displayed in hours and minutes When the timer is on press FN Timer to come back to normal mode timer will not stops c ELLab 2012 Socket pinout Y Footswitch socket It is intended for connection of mechanical contact v Power supply socket Specified power supply is 24V 25W Power supply socket Automatic restrictions When current exceed 3A or 25W of power limiting system smoothly reduce voltage After 1 second limiting system tries to increase voltage If unexpected current jump occurs up to 6A or power up to 40W limiting system disconnects machine and displays message Err Message Err S means short circuit between interface connectors Electrical characteristics gt Output voltage 1 5 20 V gt Regulation step 0 1 V gt Output voltage inaccuracy max 0 5 gt Maximum output current 3A peak to 6A Maximum power 20W c ELLab 2012
Download Pdf Manuals
Related Search