NT Series
Contents
1. and other reasons It is our practice to change part numbers when published ratings or features are changed or when significant construction changes are made However some specifications of the Product may be changed without any notice When in doubt special part numbers may be assigned to fix or establish key specifications for your application Please consult with your Omron s representative at any time to confirm actual specifications of purchased Product Errors and Omissions Information presented by Omron Companies has been checked and is believed to be accurate however no responsibility is assumed for clerical typographical or proofreading errors or omissions 2014 4 In the interest of product improvement specifications are subject to change without notice OMRON Corporation Industrial Automation Company http www ia omron com c Copyright OMRON Corporation 2014 All Right Reserved2. and understand this catalog Please read and understand this catalog before purchasing the products Please consult your OMRON representative if you have any questions or comments Warranties a Exclusive Warranty Omron s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron or such other period expressed in writing by Omron Omron disclaims all other warranties express or implied b Limitations OMRON MAKES NO WARRANTY OR REPRESENTATION EXPRESS OR IMPLIED ABOUT NON INFRINGEMENT MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right c Buyer Remedy Omron s sole obligation hereunder shall be at Omron s election to i replace in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof the non complying Product ii repair the non complying Product or iii repay or credit Buyer an amount equal to the purchase price of the non complying Product provided that in no event shall Omron be responsible for warranty repair indemnity or any other claims or expenses regarding
3. function Double width double height and magnifications 4X 9X 16X Smoothing processing Character display attribute Available for enlarged characters with magnification of 4X or greater Normal reverse flashing reverse and flashing Graphics Data Capacities Item Character strings Numeral data Mark data Touch switches Lamps Polylines circles Specifications Memory Link RS 232C Direct Communications Communications 32 characters x 128 8 digits x 128 64 256 per file max 256 per file max OMRON Differences between the NT20 NT20S and NT20M Function Communications A host interface unit is needed NT20M DT131 NT20S e NT20S ST121 V3 Built in Host Link NT Link e NT20S ST122 V1 Built in C200H Direct Communications e NT20S ST128 Built in Memory Link RS 232C Other host interface units cannot be connected NT Series NT20 System programs can be downloaded using the System Installer e Host Link NT Link C200H Direct and Mitsubishi Communications pre installed NT20 ST121 e Memory Link RS 232C is provided with a different system program Communications connectors Connector on front panel for connection to Support Software 9 pin and connector on rear panel for connection to host e NT20S ST121 V3 ST128 Connector 9 pin for either Support Software or host e NT20S ST122 V1 Connectors on rear panel for Support Software 9 pin and host Two commu
4. the Products unless Omron s analysis confirms that the Products were properly handled stored installed and maintained and not subject to contamination abuse misuse or inappropriate modification Return of any Products by Buyer must be approved in writing by Omron before shipment Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components circuits system assemblies or any other materials or substances or environments Any advice recommendations or information given orally or in writing are not to be construed as an amendment or addition to the above warranty See http www omron com global or contact your Omron representative for published information Limitation on Liability Etc OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL INDIRECT INCIDENTAL OR CONSEQUENTIAL DAMAGES LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS WHETHER SUCH CLAIM IS BASED IN CONTRACT WARRANTY NEGLIGENCE OR STRICT LIABILITY Further in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted Suitability of Use Omron Companies shall not be responsible for conformity with any standards codes or regulations which apply to the combination of the Product in the Buyer s application or use of the Product At Buyer s request Omron will provide applicabl
5. 2 High o9 gy spect NT CJ10 CS1H and CS1G E o a CJ10 H CS10 H C200HX Z C200HG Z C200HE Z C200HS CPU20 C200HS CPU3H and CS1 Host Link Communications Units CQM1 CPU40 CQM1 CPU20 CPM1A CPM2A CPM1C SRM1 CVM1 CVseries EV1 or EV2 C series CV series CVM1 Host Link Unit Connectable Memory Link Personal Computer SBC and Programmable Controller AL ee PELARG ANa hosts See note 5 Mitsubishi FX uei cEC FX1 FX2 FX2C FXO and FXON T Series 2 Mitsubishi A E 2 Series AOJ2 C21481 A1SJ71UC24 R2 i S Computer Link A1SJ71UC24 R4 and AJ71UC24 Unit Allen Bradley DE1 SLC 5 02 03 04 and 05 See note 2 GE Fanuc SNP X 90 20 and 90 30 Series See note 2 EE S7 300 and S7 400 Series See note 2 Adapter Japanese O English O Language Simplified Chinese O See notes 3 4 and 5 See note 3 Note 1 There are some limitations on hosts that can be connected Refer to the PT manual for details C200H direct connections can be used with the NT20 ST121 using the NT20 IF001 2 The English version of the NT Support Tool must be used 3 Simplified Chinese is mostly used in mainland China and uses simplified characters Traditional Chinese is mostly used in Hong Kong and Taiwan and uses traditional characters 4 Purchase the NT20 ST121 B EC to display simplified Chinese on the NT20 5 A separate system program must be installed in the NT20 to use RS 232C memory links with the NT
6. 20 Simplified Chinese is not supported OMRON NT Series Ordering Information International Standards e The standards are abbreviated as follows U UL U1 UL Class Division 2 Products for Hazardous Locations C CSA UC cULus UC1 cULus Class Division 2 Products for Hazardous Locations CU cUL N NK L Lloyd and CE EC Directives e Contact your OMRON representative for further details and applicable conditions for these standards Programmable Terminals iem Specification Model Standards Frame color beige NT631C ST153 EV3 NT631C TFTcolor fE rame color black NT631C ST153B EV3 STN Frame color beige NT20 ST121 E CU CE NT20 monochrome Frame color black NT20 ST121B E Programming Devices iem Specification Model Standards Windows 98 NT 2000 Me XP Vista or 7 Note Except for a English Windows XP 64 NT ZJCAT1 EV4 Mb bit version Sele provided on CD ROM _ Memory Unit for Screen NT631C NT20 NT MF261 common Transfer For screen For IBM PC AT or XW2Z S002 transfer compatible 2 m Salite For hardcopies of Printer P NT CNT121 Screens Options Item Specification 1 Model Standards DeviceNet Interface Unit NT DRT21 U C Anti reflection NT631C Sheets 5 sheets NT610C KBA04 surface only NT20 5 sheets NT20 KBA04 NT631C 5 sheets glare NT831C KBAOS Protective NT631C Cover 5 sheets non N
7. ED automatic transfer or automatic transfer error Note 1 There are sometimes faulty in the touch panel but this does not indicate an error as long as the number of bright or dark pixels does not exceed the following limits 4 total bright or dark defects maximum of the following size with no more than one per 20 mm square 0 2 mm lt short dia long dia 2 lt 0 55 mm 2 This time is only a guide to the half life of luminescence at room temperature and standard humidity The service life will be dramatically reduced in low temperature environments For example the service life at O C or less is approximately 10 000 hours reference value Operation Specifications Item Touch panel Specifications Number of switches Up to 72 registered per screen 12 x 6 horizontal x vertical Switch size 9 14 x 9 18 mm horizontal x vertical Input Pressure sensitive Operating force 1 N max Service life 1 000 000 operations min Screen saving method image data memory Flash memory specific NT20 format Note No of numeral table entries that can be used No of numeral displays used No of graphs used No of numeral settings lt 128 Display Element Specifications Item Display characters Specifications Half size characters 8 x 8 dots Alphanumerics and symbols Normal size characters 8 x 16 dots Alphanumerics and symbols Mark data 16 x 16 dots User defined picture characters Enlargement
8. Programmable Terminal NT Series Better Compatibility and Easier to use Support Software CSM_NT_series DS E 2 1 e Device monitoring and I O comment loading functions facilitate system construction e Greatly enhanced NT Support Software with reusable screen data and powerful simulation on editing screens e Transfer the system program and screen data to ensure smooth on site system maintenance and improve the efficiency of onsite work e Wide Range of Communications Interfaces oi a COC je desl NT20 NT631C Lineup Model NT631C ST153 B EV3 NT20 ST121 B Display TFT color display STN monochrome display Effective display area 211 x 158 mm 111 5 x 57 6 mm Number of dots resolution 640 x 480 dots 256 x 128 dots Max number of touch switches 32 x 24 switches 12 x 6 switches External interface RS 232C RS 422A RS 485 and printer port 2 RS 232C ports Applicable standards cULus standards EC Directives and C Tick 1 to 1 NT Link C200HX Z C200HG Z C200HE Z C200HS CPU20 and C200HS CPU3 CQM1 CPU40 CPM1A CPM2A C SRM1 CVM1 CV Series EV1 or EV2 and C200HX HG HE Communications Boards z 1 to N NT Link CJ10 CS1H CS1G C200HX Z C200HG Z C200HE Z and SRM1 EV2 Q CS1 Communications Unit and CQM1H Communications Board
9. T631C KBAO5N glare NT20 5 sheets NT20S KBA05 B Chemical NT631C NT625 KBA01 Option resistant cover NT20 KBA01 silicon cover NT631C NT20 C500 BATOS common Refer to the Catalog for V520 RH21 6 details RS 422A For NT20 ports A UC1 N L Converter and B CJTW CIF11 CE Interface Attachment For NT20 NT20 IF001 Battery Bar code Reader Communications Cable between PT and PLC PT end PLC end Cable length Cable model Standards D sub XW2Z 200T NT631C port 9 pin a AorB PP connector XW2Z 500T pin connector 20 portA D sub XW2Z 200S or B 25 pin connector XW2Z 500S OMRON Specifications NT631C General Specifications Item Model Rated power supply voltage NT631C ST153 B EV3 24 VDC Allowable power supply voltage range 20 4 to 26 4 VDC 24 VDC 15 10 Power consumption 18 W max Ambient operating temperature 0 to 50 C Storage temperature 20 to 60 C Ambient operating humidity 35 to 85 with no condensation Ambient operating environment No corrosive gases Noise immunity Conforms to IEC 61000 4 4 at 2 kV power supply line Vibration resistance during operation 5 to 9 Hz single amplitude 3 5 mm 9 to 150 Hz 9 8 m s 10 times 1 octave min each in X Y and Z directions Shock resistance during operation 147 m s 3 times each in X Y and Z direction
10. ctor Display Specifications Item Shock resistance during operation 147 m s 3 times each in X Y and Z directions Dimensions 190 x 108 x 53 5 mm W x H x D Panel cutout dimensions Weight 178 5 0 50 x 98 5 0 50 mm horizontal x vertical Panel thickness 1 6 to 4 8 mm 0 7 kg max Degree of protection Applicable standards Front panel operating section Equivalent to IP65 oil proof type and NEMA 4 See note 2 UL 1604 Class 1 Division 2 EC Directives Note 1 The display quality e g contrast will deteriorate at temperatures above 40 C At low temperatures the response speed will be reduced due to the characteristics of liquid crystal 2 The NT631 NT31 NT20 may not be able to be used in locations subject to long term oil exposure Display Panel Specifications Display characters Specifications Host Link NT Link or C200H Memory Link RS 232C Direct Communications Communications Fixed displays character strings registered for each screen Character string 32 per screen 128 per file Touch switches Numeral settings Normal screen E displays 32 per screen Numeric displays E E See note 50 per screen max 8 digit display Bar graph displays gt 3 See note 50 per screen 2 Graphic displays Any position m Lamps 128 per screen 256 max per file 256 max per fle Numeral setting display 8 digits 50 per screen The normal scre
11. e third party certification documents identifying ratings and limitations of use which apply to the Product This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product machine system or other application or use Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer s application product or system Buyer shall take application responsibility in all cases NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS AWHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS AND THAT THE OMRON PRODUCT S IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM Programmable Products Omron Companies shall not be responsible for the user s programming of a programmable Product or any consequence thereof Performance Data Data presented in Omron Company websites catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty It may represent the result of Omron s test conditions and the user must correlate it to actual application requirements Actual performance is subject to the Omron s Warranty and Limitations of Liability Change in Specifications Product specifications and accessories may be changed at any time based on improvements
12. en display Overlapping screens Continuous screens Screen types Screen attributes Number of screens Screen registration method A maximum of 8 registered screens can be displayed overlapped with each other Switch among up to 8 screens Use T and J touch switch keys to switch screens Buzzer numeral Buzzer numeral settings settings backlight backlight bit inputs 495 screens max By transmitting screen data created using the Support Tool to the NT20 By transmitting screen data stored in a Memory Unit to the NT20 automatic manual Item Specifications Display device Monochrome STN LCD 140 128 x 260 256 dots horizontal x vertical Number of dots Dot size 0 42 mm resolution The number of dots that can be used in NT20 Display system programs is indicated in parentheses See 66 57 6 x 120 115 2 mm horizontal x vertical ae 1 ape ne zd Mun ie an M can be used with NT20 system programs is indicated in parentheses Display mode Blue mode Service life 50 000 hours min Contrast adjustment The contrast can be adjusted from the back of the PT Service life 50 000 hours min See note 2 Replacement Cannot be replaced Bactvgnt Brightness adjustment Cannot be set Automatic turn OFF Can be set to either 10 minutes 1 hour or lit Front Lit green Normal operation with Memory Unit panel RUN automatic transfer completed indicator Flashing green Executing Memory Unit L
13. ms OMRON Specifications NT20 General Specifications ltem Model Rated power supply voltage NT20 ST121 B 128 B 24 VDC Allowable power supply voltage range 20 4 to 27 6 VDC 24 VDC 15 10 Allowable power d E Not specified interruption time Power consumption 10 W max Ambient operating O to 50 C See note 1 with no temperature condensation Storage temperature 20 to 70 C Ambient operating humidity 35 to 85 96 0 to 40 C 35 to 50 96 40 to 50 C with no condensation Ambient storage humidity 35 to 50 40 to 50 C 35 to 85 96 20 to 40 C 35 to 45 96 50 to 70 C with no condensation Ambient operating environment Noise immunity Vibration resistance during operation No corrosive gases Conforms to IEC 61000 4 4 at 2 kV power supply line 5 to 9 Hz single amplitude 3 5 mm 9 to 150 Hz 9 8 m s 10 times 1 octave min each in X Y and Z directions NT Series External I F Specifications Item Model NT20 ST121 B Conforms to EIA RS 232C D sub 9 pin connector female Serial port A 5 V 150 mA max output at pin No 6 Serial The 5 V output however cannot be used communi simultaneously at ports A and B CANON EIA RS 232C Serial port B Expansion I F D sub 9 pin connector female 5 V 150 mA max output at pin No 6 The 5 V output however cannot be used simultaneously at ports A and B Dedicated conne
14. nications connector ports 9 pin on rear panel Port A For either Support Software or host communications Port B For host communications only Host RUN input terminal Alarm output terminal Yes No No System keys Yes No No Contrast adjustment Front panel Rear panel Rear panel Expansion I O Unit Possible with DN type Not possible Not possible Water resistance Equivalent to IP54 Equivalent to IP65 Equivalent to IP65 GAY ME PER 5 ms Not specified Not specified interruption time System ROM A zem ROM colmpallbie with the host Built in cannot be replaced Built in cannot be replaced interface unit is required Resume function Yes No No History holding function Yes No No Screen data compatibility No Yes See note Yes PLC ladder program No Yes Vee compatibility LCD life 50 000 hours min 50 000 hours min 50 000 hours min for aad 10 000 hours replaceable 10 000 hours replaceable 50 000 hours replacement not required Image data memory Image data memory capacity Sold separately select EPROM SRAM or EEPROM 128 KB max Built in flash memory 96 KB Built in flash memory 512 KB Dimensions Panel cutout 220 x 110 x 82 mm 209 x 98 5 mm 190 x 110 x 58 mm 178 50 x 100 5 mm 190 x 108 x 53 5 mm with no host interface 178 5 x 98 5 mm Note If screens require continuous screens numeral settings buzzer stop or other system ke
15. reater excluding marks Character display attribute Normal reverse flashing reverse and flashing transparent Image data Library data Graphics Line type Variable size pictograph Size Min 8 x 8 dots Max 640 x 480 dots The size can be set in 8 dot units It is not possible to set enlarged display smoothing processing or display attributes such as reverse flashing Combination of any characters and graphics Size Min 1 x 1 dots Max 640 x 480 dots Any size can be set Enlarged display smoothing processing and display attributes such as reverse flashing are displayed according to the setting registered Polyline circle arc fan square polygon Solid line dotted line alternate long and short dash long and two short dashes only polylines for other than solid lines Expansion I F Dedicated connector Tilling Graphic display attribute Display colors Data Capacities Item Model Screen data capacity Numeric memory table 10 types Normal flashing reverse reverse flashing 8 colors black blue red purple green light blue yellow white NT631C ST153 B EV3 1MB 2 words x up to 2 000 1 000 tables can be backed up with battery Character string memory table 40 normal size characters x up to 2 000 Data can be written to and read from 500 tables Bit memory table 1 bit x 1 000 Mark data 224 16 by 16 dot basis Image data 4 095 items Library data 12 288 ite
16. s Weight 2 5 kg max NT Series Display Specifications Model Character displays fixed display Item Graphic displays NT631C ST153 B EV3 65 535 per screen including marks Character string displays Numerical displays Up to 256 per screen 40 bytes 40 characters per string 256 per screen max 10 digit display 2 words Bar graph displays Up to 50 per screen percentage display and sign display are possible Analogue meter Up to 50 per screen percentage display and sign display are possible Trend graphs One frame per screen 50 graphs per frame only 8 graphs per frame with data logging Broken line graphs One frame per screen 256 graphs per frame 512 points per graph Lamps Image library displays Display elements Up to 256 per screen Up to 256 per screen Touch switches Up to 256 per screen Max overlap 256 mesh Numeral inputs Thumbwheel switches Character string inputs Up to 256 per screen Up to 256 per screen Alarm lists Alarm histories Up to 4 groups per screen Degree of protection front panel Equivalent to IP65 oil proof type and NEMA4 See note Note The equipment cannot be used for long periods of time in locations which expose the panel to spills of oil Display Panel Specifications Normal screen The normal screen display Overlapping screens Window screens Screen types Display his
17. terface NT631C RS 422A Port Printer Port Ensures 1 to N RS 422A or RS 485 communications as well as long distance communications RS 232C Port The NT631 has two RS 232C ports that can be connected directly to bar code readers for POP system construction These two ports can be used simultaneously for the Support Software and host to greatly improve debugging and maintenance efficiency Dimensions NT631C Recommended Panel Cutout Dimensions NT Series Expansion Interface Connector RS 232C port used for both Support Software and host RS 232C port host communications only Debugging and maintenance is more efficient using two ports Unit mm Recommended Panel Cutout Dimensions 98 5 3 _ L 47e OMRON Related Manuals NT Series Cat No Model Name V062 NT31 NT31C NT31 and NT31C Programmable Terminals Setup Manual V063 NT631 NT631C NT631 and NT631C Programmable Terminals Setup Manual V069 NT21 NT31 NT631 NT21 NT31 and NT631 Series Programmable Terminals Reference Manual V091 NT20 NT20 NT series Programmable Terminal User s Manual V061 NT ZICAT1 EV4 up o NT SERIES SUPPORT TOOL FOR WINDOWS VER 4 L OPERATION V066 NT DRT21 DeviceNet CompoBus D Interface Unit OPERATION MANUAL NT31 and NT31C have been discontinued at the end of March 2014 OMRON Terms and Conditions Agreement Read
18. time until brightness is reduced by half under normal temperature and normal humidity Operation Specifications Item Model NT631C ST153 B EV3 Number of switches 768 32 x 24 Touch panel Input Pressure sensitive Operating force 1 N max 1 000 000 operations min External I F Specifications Item Serial communications Parallel I F Model Serial port A Serial port B NT631C ST153 B EV3 Conforms to EIA RS 232C D sub 9 pin connector female 5 V 250 mA max output at pin No 6 EIA RS 232C RS 422A 485 selectable by memory switch setting RS 232C D sub 9 pin connector female RS 422A 485 Terminal block 6 terminals Conforms to Centronics specifications 20 pin half pitch connector Screen registration method Screen saving method By transmitting screen data created using the Support Tool to the NT631C By transmitting screen data stored in a memory unit to the NT631C Flash memory screen data memory in the PT Display Element Specifications Item Model Display characters Enlargement function NT631C ST153 B EV3 Half size characters 8 x 8 dots Alphanumerics and symbols Normal size characters 8 x 16 dots Alphanumerics and symbols Mark data 16 x 16 dots User defined picture characters Normal size double width double height and magnifications of 4X 9X 16X 64X Smoothing processing Available for enlarged characters with magnification of 4X or g
19. tory screens A maximum of 8 registered screens can be displayed overlapped with each other Up to 3 screens 2 local windows and 1 global window can be displayed at the same time Order of occurrence max 1 024 screens order of frequency max 255 times Screen attributes Max number of registered screens Buzzer display history background color backlight keyboard screen number 3 999 screens Screen No Number of screens 0 No display 1 to 3999 User registered screens 9000 Initializing system screen 9001 Display history occurrence order screen 9002 Display history frequency order screen 9020 Programming Console function screen 9999 Return to the previous screen 9021 to 9023 Device monitor Item Model NT631C ST153 B EV3 Display device Color TFT LCD Melors zog 640 dots horizontal x 480 dots vertical resolution Effective display 211 x 158 mm area 10 4 inches Display 8 colors Display color intermediate colors can be displayed in tiling patterns T 50 000 hours uem us until contrast is reduced by 5096 Automatic turn OFF 1 to 255 minutes None Service life when Backlight brightness is set to 50 000 hours min See note high POWER Green Lit while power is being supplied Green Lit during operation Lit when the battery voltage is low when EED RUN orange operating R Lit when the battery voltage is low when ed stopped Note The
20. y functions touch switches with the system key functions must be set for each screen using the Support Software For details refer to the NT20S Programmable Terminal User s Manual Cat No V020 System Program Transfer By transferring a new system program functions and performance can be updated without changing hardware 1 The compatible combinations of NT631 models and system program versions are shown in the table Indicates the preinstalled default combination of versions recommended Q Indicates combinations of versions that can be transferred for operation AA Indicates combinations of versions that can be transferred but for which some functions are restricted during operation e g high quality character display x Indicates combinations of versions that cannot be transferred NT631 system program version 4 x can be transferred only with System Installer V2 which is available on the CD for NT Series Support Software version 4 08 or higher Only system programs up to version 3 x can be transferred with older versions of the System Installer The NT20 system program can be transferred only with System Installer V2 1 which is available on the CD for NT Series Support Software version 4 8 or higher It cannot be transferred with lower versions of the System Installer System See note Note The system version is shown in the System Installer program under Ver OMRON External In
Download Pdf Manuals
Related Search