未命名 -1 - Camere supraveghere video profesionale
Contents
1. Vandal proof IR Dome Camera Instruction Manual Before operating the unit please read this manual thoroughly and retain it for future reference Safety Precaut DO NOT ATTEMPT TO DISASSEMBLE THE CAMERA A Risk of Electric Shock Do not Open A CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSON A This symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons A This symbol is intended to alert the user to the presence of important operation and maintenance instructions in the literature accompanying the appliance Warning 1 10 11 12 This product has patented for configuration and appearance design and copying is not permitted If this product fails to operate normally contact authorized distributor Never disassemble or modify the product in any way Problem caused by unauthorized user disassembly or repairs are out of warranty scope Electromagnetic fields in specific frequency may cause image interference Be sure to use only the standard adapter which is specified in the specification sheet Using other adapter could cause fire electric shock or damage to produce Incorrectly connecting the power supply may result in fire2. electric shock or damage to produce as well Do not connect multiple cameras to a single adapter Exceeding the capacity may cause abnormal heat generation or fire Securely plug the power cord into power receptacle Aloose connection may result in fire When installing the camera on a wall or ceiling fasten it safely and securely A falling camera may cause personal injury Do not place conductive objects e g screwdrivers coins metal things etc or containers filled with water on top of the camera Do not install the unit in humid dusty or sooty locations Doing so may cause personal injury If any unusual smell or smoke comes from the unit please stop using the product In such case please immediately disconnect the power source and contact local authorized distributor Do not install the unit in humid dusty or sooty locations Doing so may cause personal injury Cautions 1 Do not drop objects on the products or apply strong shock to it Keep it away from a location subject to excessive vibration or magnetic field interference Do not install in a location subject to high temperature over 122 F or 50 C low temperature below 14 F or 20 C or may cause fire If want to relocate the installed products be sure to turn off the power before moving or reinstalling it Remove the power plug from the outlet when there is a lightning storm Neglecting to do so may cause fire or damage to th
3. e product Avoid a location which is exposed to direct sunlight or near heat sources Neglecting to do so may cause fire Install in a well ventilated location Avoid aiming the camera directly towards extremely bright objects such as the sun as this may damage the CCD image sensor Important Safety Instructions on oak won Read these instructions Keep these instructions for later use Pay attention that all warnings should be adhered to Follow all instruction Do not use this product near water Clean only with dry cloth Do not block any ventilation openings Do not install near any heat sources such as radiations heat registers or other product including amplifiers that produce heat 3 10 11 12 13 14 15 16 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Only use attachment accessories specified by the manufacturer For added protection for this product during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system Refer all servicing to qualified service personnel Servicing is required when the product has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the product has been exposed to rain or moist
4. e may be fixed image clutter on the entire monitor screen Vertical Streak Fixed Image Clutter When shooting at a ribbon like object a straight line or Jagged Image something of similar patterns the image displayed on the monitor may be serrated Chapter 4 Current Maintenance 1 Inuse of the camera regularly clean the dust and dirt on the lens surface of the camera to keep good clarity of image 2 Clean the camera with dry and soft cloth For stubborn dirt please wipe it with a cloth dipped in a little neutral detergent and then dry the camera with cloth 3 Becareful not to use volatile impregnant like thinner alcohol benzene or pesticide etc to clean the camera for that can damage the surface coating and even weaken the function and performance of the camera 1
5. es costly installation time and provides more convenience and functions Built in 3 6mm 1 3 IR 1 3 Megapixel Lens Built in ICR 2 Pcs of IR LED Array Total Power 4W Visible Range up to 20m 60feet in Total Darkness 3 Axis Vertical Horizontal Rotational Full Metal Body Vandal proof Water Resistance IP 66 Specification Model No 1 3 DIS 1 4 DIS Image Sensor 1 3 DIS 1 4 DIS Signal System PAL NTSC Effective Pixel 756 H 504 V 700TVL 0 1Lux F1 2 AGC ON 0 Lux with IR 1 25 1 30 s to 1 15 000s IR Cut Filter with Auto Switch 720 H 576 V 7OOTVL 1Lux F1 2 AGC ON 0 Lux with IR Auto Horizontal Min Illumination Shutter Time Camera Day amp Night Sync Internal Video Output 1Vp p Composite Output 75Q BNC S N Ratio Model 3 6mm IR 1 3MP Lens Angle of View 70 M12 DC 12V Max 1W Max 6 W with IR Cut Filter ON Operating 20 C 50 C IR Light 2 Pcs of Array LED 2W Each IR Range 20m 60ft 3m 10ft eather Proofi IP66 Bracket 3 AXIS Concealed Cable Bracket 071 4 mmx72 1mm 260g Design and Specifications are subject to change without notice Package Check the contents of package The following items are included One User Manual One IR dome camera Three fixed screws with dielectrical covers One dielectrical paper One L type screw dr
6. iver Product Parts Fixed Holder Connecting Ring Holding Housing e Function of product parts Fixed Holder Fixing the camera to the ceiling or wall Connecting Ring Fixing the main housing and the eyeball to fix the monitoring direction Holding Housing Holding the eyeball Eyeball Main body in which the lens and chipset built in IR LED Array Providing assisting light source in darkness 0000 886 Photovaristor Automatically photometry to switch the IR LED Chapter 2 Operating Instruction Connection 1 Connect one end of the BNC Cable to the terminals of the monitor Connect the other end of the BNC Cable to the VIDEO OUT Then plug in the power adapter into the power receptacle The screen will be displayed when the monitor is on Installation Before Installation Read the cautions before installation 1 Make sure the installation location can support 5 times the total weight of the dome camera 2 Be careful not to let the cable be jammed in inappropriate places or to let the insulation covering of the cable peel off during installation This may result in malfunction or a fire hazard 3 Make sure that nobody is beneath the installation location and remove the camera if anything urgent needs dealing there Installing the Camera Installation process is illustrated as below Step 1 Place the dielectrial paper on the wall ceiling which is to protec
7. t the camera from damage by conducted current Then fix the fixed holder to the wall ceiling with 3 screws Pay attention to the cable trough Put it in the direction of power supply if cables exit there Step 2 Attach the camera body to the fixed holder Step 3 Rotate the eyeball to set the monitoring direction according to actual need in different applications Step 4 Fasten the connecting part to finish the installation job Cautions for Installation 1 Allow the cable to pass through the hole in the middle before mounting the camera to the fixed holder 2 If passing through the side the cable must be put at the cable trough first before the camera is mounted 10 Chapter 3 Common Troubleshooting If encounter troubles in use of the bullet camera please refer to the following instructions For more information please consult nearby local authorized distributor Troubles Solution Check the power supply or the connection among the No Video Output cable camera and monitor Check whether the camera is connected to the DC 12V Malfunction power supply Adjust the display contrast of the monitor Change the LightImage location if the camera is exposed to intense light DarkImage Adjust the Brightness The situations below are not malfunction of the camera It may appear when the camera is exposed to intense light When the camera is in high temperature environment ther
8. ure does not operate normally or has been dropped Do not operate the camera beyond its temperature humidity or power source ratings Operating temperature 14F 122F 20 C 50 C Humidity lt 85 Do not point the camera towards the sun do not operate camera in a spotlight highlight or reflection environment Do not install or use the camera in the following places a In excessive heat or cold locations b In damp or dusty locations c In a place exposed to rain d In a place subject to vibration e Near a source of electromagnetic radiation wireless radio or television emission f Ina place exposed to fluorescent light g In a place under poor lighting condition The laser beam may damage CCD Do not project the laser beam directly into the lens of the camera Table of Contents Chapter 1 Overview 6 8 Instruction 6 Specification eccesceeeeeeseeeepteeeeeee 6 7 Package Product Parts ce cecseseeceeslisessesseesseeseeee 8 Chapter 2 Operating Instruction Confection 16 0 gPh cnc 9 Installation 2 2 2202dokeeeee ee eeeee ee ee neces eeeeeeeeeee 9 Before Installation 9 Installing the Camera 2 22 225 10 Cautions for Installation 10 Chapter 3 Common Troubleshooting 11 Chapter 4 Current Maintenance Chapter 1 Overview Instruction This is a Vandal proof IR Dome camera It sav
Download Pdf Manuals
Related Search