Product Manual wicicle-wireless-dmx-system-user-manual-rev
Contents
1. altered or removed if the product is modified in any manner which Blizzard Lighting LLC concludes after inspection affects the reliability of the product if the product has been repaired or serviced by anyone other than the Blizzard Lighting LLC factory unless prior written authorization was issued to purchaser by Blizzard Lighting LLC if the product is damaged because not properly maintained as set forth in the instruction manual This is not a service contract and this warranty does not include maintenance cleaning or periodic check up During the period specified above Blizzard Lighting LLC will replace defective parts at its expense with new or refurbished parts and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship The sole responsibility of Blizzard Lighting LLC under this warranty shall be limited to the repair of the product or replacement thereof including parts at the sole discretion of Blizzard Lighting Blizzard Lighting LLC reserves the right to make changes in design and or improvements upon its prod ucts without any obligation to include these changes in any products theretofore manufactured No warranty whether expressed or implied is given or made with respect to any accessory supplied with products described above Except to the extent prohibited by applicable law all implied warranties made by Blizzard Lighting LLC in connection with this product incl2. panel of the fixture e This product is intended for indoor use only e To prevent risk of fire or shock do not expose fixture to rain or moisture e Maximum ambient temperature is 104 F 40 C Do not operate fixture at higher temperatures e In the event of a serious operating problem stop using the unit e Never try to repair the unit by yourself Repairs carried out by unskilled people can lead to damage or malfunction e Never connect the device to a dimmer pack e Make sure the power cord is never crimped or damaged e Never disconnect the power cord by pulling or tugging on the cord CAUTION There are no user serviceable parts inside the unit Do not open the housing or attempt any repairs yourself If something is wrong just give us a call or send an email We ll be happy to help honest support blizzardlighting com www blizzardlighting com 866 493 6025 414 395 8365 FAX 866 870 0031 WE HAD THIS PAGE SO WE AG URED WE D DRAW YOU A PIC TURE Antenna Housing amp 1 2 wave Antenna Antenna ferrule amp articulation joint Stainless Steel Housing Recessed Selector Button Status LED 3 Pin XLR Connector Male on transmitter Female on receiver model POSSIBLE CONHG URATIONS The diagrams below show possible configurations Multiple receivers may be used in any possible configuration OPTION 1 A transmitter MALE XLR CONNECTOR is connected to the output of the controller and a rec
3. seconds to switch these programs off will solve a lot of ails Got that done Good Then let s proceed 1 Power on the wiCICLE Transmitter and Receiver 2 Press the button on the Transmitter to select the operating channel group The system will store this setting for future use The 7 Color Status LED will change color to indicate the current channel group GROUP 1 RED GROUP 2 GREEN GROUP 3 YELLOW GROUP 4 BLUE GROUP 5 VIOLET GROUP 6 CYAN GROUP 7 WHITE NOTE GROUP number also corresponds to the GROUP setting on our LightCaster wireless DMX Transceiver 3 Follow the same procedure on the Receiver to select the channel group 4 Once both the transmitter and receiver s are both set to the same channel group connect the transmitter to the DMX controller or the DMX out of a fixture on your DMX chain Connect the receiver to the fixture you wish to control 5 Once a DMX signal is provided to the transmitter the status LED will blink RED slowly until communication is established with the receiver The status LED on the receiver s will flash GREEN slowly until communication is established O That s It SPECIHCATIONS Model Voltage Operating Band Max Operating Range Max Transmission Power Receiver Sensitivity Data Input Transmitter Data Ouput Receiver Protocol Dimensions Weight Duty Cycle Working Position Warranty Once the cleare
4. PRO DUCT LIMITED WARRANTY Blizzard Lighting LLC hereby warrants that its products shall be free of manufacturing defects in material and workmanship for a prescribed period from the date of purchase see specific warranty period below This warranty shall be valid only if the product is purchased within the United States of America including possessions and territories This warranty shall be valid only if the product is purchased from an autho rized dealer appointed by Blizzard Lighting LLC It is the owner s responsibility to establish the date and place of purchase by acceptable evidence For warranty service you must obtain a Return Authorization number RA before sending back the product Contact Blizzard Lighting LLC s Service Department at support blizzardlighting com Send the product only to the Blizzard Lighting LLC factory All shipping charges must be prepaid If the requested repairs or service including parts replacement are within the terms of this warranty Blizzard Lighting LLC will pay return shipping charges only to a designated point within the United States If the entire instrument is sent it must be shipped in its original package No accessories should be shipped with the product If any accessories are shipped with the product Blizzard Lighting LLC shall have no liability whatsoever for loss of or damage to any such accessories nor for the safe return thereof This warranty is void if the serial number has been
5. e to the wiCICLE or fixture e All fixtures must be powered directly off a switched circuit and cannot be run off a rheostat variable resistor or dimmer circuit even if the rheostat or dimmer channel is used solely for a 0 to 100 switch Please carefully read and understand the instructions in this manual thoroughly before attempting to operate this unit These instructions contain important safety information regarding the use and maintenance of this unit Please keep this manual with the unit for future reference wil ICCLe f a a m an teal IFRQCECLESS VWITIX MM s r H iF zard LIGHTING 2011 2012 Blizzard Lighting LLC www blizzardlighting com FEA TURES e Reliably transmits DMX 512 wirelessly up to 300m Line of Sight e Zero Lag Time e Plug amp Play Operation e Ultra stable 2 4ghz ISM operation e Up to 7 systems may operate simultaneously e Automatic channel selection e Really extremely simple operation e FCC Compliant e One wiCICLE transmitter can broadcast to unlimited receivers e Operates seamlessly with our LightCaster DMX Transceivers SAFTETY INSTRUCTIONS e Please keep this User Manual for future consultation If you sell the unit to another user be sure that they also receive this instruction booklet e Always make sure that you are connecting to the proper voltage and that the line voltage you are connecting to is not higher than that stated on the decal or rear
6. eiver FEMALE XLR CONNECTOR Is con nected at the input of the first DMX fixture ow CE EE i DMX Fishburne Bg OPTION 2 A transmitter MALE XLR CONNECTOR is connected to the output of a DMX fixture and a receiver FEMALE XLR CONNECTOR is con nected to the input of the next DMX fixture a Transmiter OPERATION TIPS amp TRICKS Each wiCICLE acts as both a transmitter and a receiver depending on whether a DMX source is applied to the integral XLR connector This is an extremely powerful feature of the system however it also requires 1 piece of due dilligence and that is the re moval of extraneous DMX signals from your lighting rig BEFORE proceeding SO BEFORE DOI NG ANYTHI NG ELSE YOU SHOULD DI SABLE ANY BUILT IN PROGRAMS IN THE FIXTURES YOU WISH TO CONNECT AND OR SET THEM AS SLAVES PRI OR TO RETURNI NG THEM TO DMX MODE IF APPLI CABLE Most fixtures contain a built in automatic sound active or custom program which is designed to operate with the fixture NOT connected to a DMX chain Some of these programs will automatically run unless the fixture is set to slave mode These fixtures typically sense DMX automatically and switch to DMX mode upon re ceiving DMX signal our Pucks do that If you plug a wiCICLE receiver into an autosensing fixture set as a master chances are good that the wiCI CLE receiver will begin transmitting the master program Most times this is undesirable and taking the two
7. n end Whew Well now that you ve got your wiCICLE you should carefully unpack the box and check the contents to en sure that all parts are present and in good condition If anything looks as if it has been damaged in transit notify the shipper immediately and keep the packing material for inspection Again please save the carton and all packing materials If a fixture must be returned to the factory it is important that the fixture be returned in the original factory box and packing Powering Up PLEASE READ THIS SECTION The wiCICLE can be powered using the included AC power adaptor Wall Wart or directly via Blizzard Lighting products which are labelled as wiCl CLE Enabled These fixtures employ special circuitry which allows the wiCICLE to receive power directly from the XLR connector body Look for this logo on select fixtures e ONLY fixtures bearing this logo are certified for use with the wiClCLE without external power g Li l mi ami wib k L e Unauthorized modification and or using the wiCI CLE with unapproved fixtures may cause damage to the wiCICLE or fixture UNDER NO CIRCUMSTANCES IS BLIZZARD LIGHTING RESPONSIBLE FOR ANY DAMAGE FROM SUCH OPERATION e Fixtures bearing the above logo MUST only use cable and connectors which separate chassis case ground from cable shielding Cabling with the shield connected to the con nector s case chassis may cause malfunction and damag
8. st channel is auto selected the status LEDs will blink quickly wiCl CLE 5VDC 1000ma Supplied by 100 240V 50 60Hz AC Adaptor or directly by wiCI CLE ENABLED Fixtures and Equipment 2 4Ghz ISM 300 Meters Line of Sight 20dBm 94dBm 3 Pin Locking XLR Male 3 Pin Locking XLR Female USITT DMX 512 8 5 L x 0 75 Diameter 215mm x 19mm 1 Lbs 05 kgs None Any Safe Secure Position 2 Years Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice
9. uding warranties of merchantability or fitness are limited in duration to the warranty period set forth above And no warranties whether expressed or implied including warranties of merchantability or fitness shall apply to this product after said period has expired The consumer s and or Dealer s sole remedy shall be such repair or replacement as is expressly provided above and under no circumstances shall Blizzard Lighting LLC be liable for any loss or damage direct or consequential arising out of the use of or inability to use this product This warranty is the only written warranty applicable to Blizzard Lighting Products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published LIMITED WARRANTY PERIODS All LED Products 2 years does not include damage to LEDs caused by mishandling All Controller Products 2 years All Fog Atmospheric Products Non DMX 90 days DMX 2 years Lasers 2 years Other Products not listed here 90 days REGISTER YOUR PRODUCT ONLINE AT BLI ZZARDLI GHTI NG COM REGI STER GETING SIARTED What s In The Box e 1 x wiCICLE Wireless DMX Transceiver e An AC power adaptor 5VDC 1000ma Getting It Out Of The Box The wiClCLE Wireless DMX system is a teeny tiny really powerful really useful tool for decableifying your existence Just think no more becoming wrapped from head to toe in DMX cables and struggling to escape for hours o
Download Pdf Manuals
Related Search