Owner`s Manual
Contents
1. Key2 Key3 KeyA Key Import Selected Waypoint Key Key2 Key3 y4 se 5 Import Selected Track 0 y2 Key3 Key4 Key5 If exporting the file will be saved to the USB drive 24 6 If importing the processing screen displays Importing fi tl Possible Errors One of the following screens displays if a processing error occurs The device does not contain enough space to save the waypoint or track a SMS AM List Full a The USB device is not seated properly 9 45 AM The file or file name contains an error oa Ge BAS AM Invalid Filename 0 8 R Satellite Status In the GPS Manager menu select Satellite Status The screen displays all available satellites in the area Press Key 3 to exit Ce SAM Satellite Status 7 satetites 2 00 op wade 0 76 100P 1 12 voor 0 68 mor System Settings 1 Press any key to display the PIDD screen icons 2 Press Key 3 to display the main menu options 3 Toggle to System Settings Press Key 3 to select NOTE If demo mode is enabled you can toggle through the resulting menu to view options without the risk of changing seitings This tool is useful as a tutorial or for training at your dealership See page 28 for instructions DISPLAY SERVICE UNITS TIME SYSTEM INFO VEHICLE SETTINGS MEDIA A Key 2 Key1 Key3 Key4 Key5 4 Toggle through the menu Displa2. Key3 Key4 Key Key Key2 15 Press Key 3 or Key 4 to toggle to the desired file Press Key 5 to select update full Polaris_TV480_04252014_2710406 tar gz Key Key2 Key3 Keya Key 16 Press Key 5 to confirm 78 NOTE Do NOT turn the ignition key off while the file is downloading A Trails Data update will take about 5 minutes A Trails and Map Data update will take about 35 minutes 17 Wait for the process to complete If the update indicator at the upper left corner of the screen is spinning the update is processing even if the status bar stops moving update full Polaris_TV480_04252014_2710406 tar gz Key 5 Key3 Key Key Key2 NOTE if an error message displays if the update takes much longer than expected or if a black screen displays when Maps are selected after update is complete an interruption or other event may have resulted in corrupt files Perform the update manually by following the Manual PIDD Update procedure on page 76 18 The PIDD will reboot automatically when the download is complete 19 Tum the ignition key off 20 Remove the USB flash drive from the vehicle Close the protective cover on the USB connector 21 Return the USB connector to its secured position if it was moved when connecting 74 22 Repeat steps 3 7 to verify the update in SYSTEM INFO The Trails date should now reflect the more recent file date Ce Serial No 102012
3. Helpful Links at the right side of the page 76 Verify the Update in MAPS TRAILS Display 1 Press any key to display the PIDD screen icons 2 Press Key 3 to display the main menu options 3 Toggle to MAPS TRAILS Press Key 3 to select 4 Read the warning message that displays WARNING Maps Trails are supplied as an aid and should not be used for any purpose requiring precise measurement of direction distance of location Polaris makes no warranty as to the accuracy or completeness of this map data 5 Press Key 3 to accept 6 Press any key to display the PIDD screen icons 7 Press Key 1 multiple times to zoom out ESACHNCELJ Key Key2 Key3 Key4 Key 8 Verify that the updated trails data is on map Toggle to System Settings gt SYSTEM INFO The Trails and Map dates should now reflect the more recent file dates 7 Update Process Flow Chart This flow chart is a condensed version of the procedures outlined on the preceding pages Log in at RiderX com Select UPDATE Select DIGITAL DISPLAYS Press Key 5 twice Register new IDD Select file or Enter existing IDD gci bin or tar gz Select TRAILS or Select UPDATE TRAILS amp MAP data Key 5 Blue Arrow Save to computer Confirm update Choose Save not Run Key 5 Green Arrow Install USB drive Gane IDD reboots Extract files and copy to USB drive Remove USB drive In
4. features are available for KEY 2 Average Speed and Max Speed 1 Press any key to display the PIDD screen icons 2 Press Key 2 repeatedly to display each option Odometer ODO Tipt Trip 2 Trip Hours TRIP Engine Hours ENG Average Speed AVG Maximum Speed MAX IL 77 E Om 9700 w 25 AVG Key Key2 Key3 Key4 Key5 3 Average Speed AVG displays the average speed of the vehicle since the last user reset 4 Max Speed MAX displays the fastest speed reached since the last user reset 5 To reset AVG or MAX press any key to bring up the menu icons then hold Key 2 to reset value 44 Lock the Ignition First Time Activation Snowmobiles equipped with the PID are equipped with a security function that can be activated by an authorized Polaris dealer If you have this feature activated you can lock the ignition to prevent unauthorized use when leaving the snowmobile unattended A locked system will limit engine speed to 3000 RPM which prevents clutch engagement and the snowmobile will not move when throttle is applied 1 Have the security system activated by your authorized Polaris dealer 2 The factory default security code is 000 Change the default security code to a code of your own choosing See Change Security Code on page 48 Locking the Ignition 1 Start the engine Do not allow an engine to run in an enclosed area without adequate ventilation Press any key
5. 4 Pan disabled above 10 MPH 16 km h Key 5 Advance to next screen GPS Tracks Map 15 GPS Tracks Map Use the display keys to navigate the GPS Tracks menu Key 1 Centers the map on your GPS location The centering will occur after vehicle speed exceeds 10 MPH 16 km h Once the map is centered Key 1 toggles between COURSE UP and NORTH UP Key Key2 Key3 Key4 KeyS COURSE UP The arrow points towards the front of the vehicle and the map rotates around the center arrow The direction the vehicle is traveling is displayed in the upper right hand corner When in this mode NORTH UP is shown for Key 1 selecting Key 1 switches display to NORTH UP mode 02 PM 77 gt E 16 NORTH UP The top of the map is North and the arrow rotates indicating the directions the vehicle is traveling When in this mode COURSE UP is shown for Key 1 Selecting Key 1 switches display to COURSE UP mode 6 01PM 77 gt E Key 2 Places a marker at your GPS location If your vehicle is stopped the keyboard will display so you can name and save the waypoint See Keyboard Operation on page 18 If your vehicle is moving the waypoint will be placed and automatically named Press and hold Key 2 to enter the Waypoint Manager menu Key 3 Displays the keyboard to name and save the track Up to 10 tracks can be saved Press and hold Key 3 to enter the Track Manager menu Key 4 Displays a confirmation messa
6. Key Key2 Key3 KeyA Key NOTE Devices must be discoverable to show up in the lisi Your phone settings may need to be changed to allow notifications and missed calls and text messages to display 54 3 When the search is completed the PIDD displays any devices found Press Key 4 to toggle through the list The indicators at the lower right edge of the screen indicate whether the selected device is paired and or connected Pri Phone r7 o Key3 Key Key2 Key4 Key Color indicator Description BLUE The device is paired but not connected GREEN The device is paired and connected None The device is not paired 4 The PIDD will perform the search again every 10 seconds until the device is paired 5 The display will not search for devices again unless one of the following occurs You exit and re enter the display The device is disconnected 55 Pairing From the Display 1 Refer to your phone s user manual before attempting to connect to the PIDD See page 52 2 Toggle through the list to the desired device 68 gt OF Phone 102000 col Key3 Key Key2 Key4 Key 3 Press Key 3 to pair 4 Accept the pairing request on your phone Press Key 3 to accept the request on the display To cancel the request press Key 5 Phone P Pairing Requested 132981 Koy Key2 Key3 Key Koy5 56 6 When the device is co
7. Press Key 1 or Key 5 to change setting 32 System Info 1 In the System Settings menu select SYSTEM INFO 2 View the following system information in this display PIDD Serial Number Bootloader Version Display Operating System Application Version Software Configuration and Date Map Data Version Build Date Trails Data Version and Build Date LEES Sariai No 102112 Loader 3 20028 0000 L4 2 7 10182 0003 Bluetooth 5 0 00002 0818 Config 217 10442 2014 07 28 Map data eww openatroeiman aricept USA 2014 05 14 Traits US ATV 2014 07 07 Vehicle Model ZFELBA2000 iniialise E Key Key2 Key3 Key 5 Key 4 3 To initialize an PIDD for a snowmobile when required see page 39 To update software see page 69 4 Press Key 3 to exit 33 Vehicle Settings 1 In the System Settings menu select VEHICLE SETTINGS Clutching Clutching Key Key2 Key3 Key4 Key5 2 Key 2 starts and stops recording graph data 3 Key 4 downloads recorded graph data to a USB drive inserted in the vehicle s USB port Data is saved as a csv file 34 Media 1 In the System Settings menu select MEDIA 2 Toggle to desired setting Audio Video Rear if equipped Video Front if equipped 6 20 PM gt E Audio Disabled Enabled Video Rear Disabled Enabled Video Front Disabled Enabled Key Key2 Key3 Key4 Key 3 Press Key 1 or Key 5 to change the setting 4
8. Press Key 3 to exit 35 Video Rear if equipped 1 Ifenabled the display will automatically switch to rear camera when vehicle is in reverse 6 23 PM Key Key2 Key3 Key 2 Press Key 5 to toggle between front and rear video if equipped Video Front if equipped 1 Press any key to display the PIDD screen icons 2 Press Key 1 repeatedly to display each home screen option 3 If enabled front camera will follow the Auxiliary 2 home screen 6 23 PM Key Key2 Key3 Key 4 Press Key 5 to toggle to Rear Video if equipped 5 Press Key 1 4 to go to the primary riding screen 36 Diagnostics 1 Press any key to display the PIDD screen icons NOTE For snowmobiles only active faults display and the engine must be running to view faults If the Malfunction Indicator Light MIL illuminates stop the snowmobile but do not stop the engine if you wish to view the faults 2 Press Key 3 to display the main menu options 3 Toggle to DIAGNOSTICS Press Key 3 to select 4 If any faults have been detected a description screen displays with the number of faulis listed at the bottom center of the display oat AN Z IPTION 110 SPN 15 EMI P1116 Engine Temperature Sensor Temperature above normal range CORRECTION Contact Your Key Key2 Key3 KeyA Key 5 Press Key 2 or Key 4 to scroll through the faults NOTE Faults display if they were active at least
9. at rest in the map screen will jump around This could be due to poor visibility of the sky electrical interference or a defective antenna Good satellite reception Typically you will see more than 4 satellites and HDOP numbers less than 2 hos 84 Gb POLARIS For your nearest Polaris dealer call 1 800 POLARIS 765 2747 or visit www polaris com Polaris Industries Inc 2100 Highway 55 Medina MN 55340 Part No 9925416 Rev 04 Printed in USA
10. computer Double click the file Select Run 2 Make a note of the file path shown in the Extract to window Click Extract 3 Navigate to the file location noted in the previous step Open the folder and copy all of the extracted files onto the USB flash drive 70 Update the PIDD 1 Before updating the PIDD always export your existing tracks and waypoints to a USB drive to avoid losing them When the PIDD update is performed all formerly saved tracks and waypoints will be erased from the PIDD 2 After downloading an update from your Rider account and saving the extracted files to the USB flash drive connect the flash drive to the USB connector on your vehicle For vehicle USB connector locations see page 66 NOTE Always download the most recent data from RiderX com before updating the PIDD 3 Tum the ignition key to the ON RUN position If your vehicle does not have a battery start the engine and allow the idle to stabilize before continuing Do not allow an engine to run in an enclosed area without adequate ventilation 4 Press any display key to display the PIDD screen icons 5 Press Key 3 to display the main menu options 6 Toggle to System Settings Press Key 3 to select 7 Inthe System Settings menu select SYSTEM INFO ce Serial No 102012 Loader 2 3 20026 0000 pp 2 7 10182 0003 Bluetooth 5 0 00002 0818 2 7 10442 2014 07 28 USA 2014 05 14 us ATV 2014 07 07 Bam V
11. ia c A Key1 Key2 Key3 Key4 KeyS In the System Settings menu toggle to VEHICLE SETTINGS specific to snowmobiles Press Key 3 to select Fuel type Lock Change Code a Com 953AM FUEL TYPE Lock J CHANGE CODE Key Key2 Key3 Key4 Key NOTE Lock and Change Code display only if the engine is running and the PIDD has been initialized 42 Fuel Type Selection Ethanol non Ethanol 1 In the Vehicle Settings menu toggle to FUEL TYPE 2 Press Key 3 to select E10 Ethanol FUEL Key Key2 Key3 Key Key 3 Press Key 2 or Key 4 to toggle between the fuel types When the screen displays the fuel type used in the fuel tank press Key 3 to exit PIDD Power Sources NOTE On snowmobiles equipped with an electric start battery and PIDD always turn the key off when the PIDD is not in use If the key remains in the RUN position after using the auxiliary engine stop swilch to stop the engine the PIDD remains active drawing power from the battery NOTE The PIDD is not dependent on the battery while the engine is running but the battery supplies a constant power source when the engine is off or when the engine is transitioning between forward and reverse operation If a battery is not installed the PIDD reboots when the engine is started and when electronic reverse PERC is used 43 Average Speed Max Speed When using the PIDD on a snowmobile two additional
12. once during the current ignition cycle If the Malfunction Indicator Light MIL is ON one or more of the faults in this list is an active fault 6 Press Key 5 to exit 7 Fora system diagnostics inspection and or service please see your authorized Polaris dealer 37 PIDD for Snowmobiles General Snowmobile PIDD Information Certain PIDD features are active only when using the display on snowmobiles Some PIDD features may function only while the engine is running such as Security and Diagnostics If an PIDD feature seems non functional start the engine to access that feature Do not allow an engine to run in an enclosed area without adequate ventilation Snowmobile specific PIDD features include Left Hand Controls Fuel Type Selection Security if enabled Average Max Speed PIDD features that are not active when installed on a snowmobile include Gear selection reverse only All Wheel Drive Indicator CAUTION The speedometer may display incorrect values at the existence of electromagnetic radiation gt 10 Vim The PIDD initialization process must be performed on some snowmobiles in order for a new or newly installed PIDD to function properly It must also be performed every time the PIDD is updated with files from the RiderX web site See page 39 These models include 600 AXYS models Any non AXYS model for which an accessory PIDD is available 38 Initialization Process The initial
13. phone is connected Register for a RiderX Account 1 Ifyou don t already have a RiderX account go to RiderX com 2 Click Sign In at the upper right corner of the page 3 Scroll down and complete the online form to register for a free account NOTE Multiple PIDD devices can be registered to the same RiderX account Additional accounts are not required for multiple devices 68 Register an PIDD Rider or Dealer Be prepared to provide the following information when registering an PIDD The vehicle s Vehicle Identification Number VIN see the vehicle s owner s manual for location The PIDD serial number located in the Systems Info display on the PID see page 33 1 Login at RiderX com 2 Select Digital Displays in the menu bar 3 Ifyou are a Polaris dealer check the box next to I h ve a dealer number Enter your 7 digit dealer number NOTE When a user rider or dealer logs in to a RiderX account the user information for that account will automatically populate the online registration form 4 Click on Register My Display Update Trails Data or Maps Trails Data The Trails data and the Maps Trails data on your PIDD can be updated using files downloaded from your RiderX account NOTE Trails data expires 90 days from the file s release date An update involves four 4 procedures Download the data Copy files to a USB flash drive Update the PIDD Verify the update appears in SYSTEM INFO and i
14. release Models Without Battery ON Start the engine OFF Tum the key to the OFF position REBOOT Option i Tum the key OFF for 5 seconds then start the engine Option 2 With the engine running press and hold Display Key 5 for 20 seconds then release NOTE Using the auxiliary engine stop switch on a snowmobile to turn off the engine will not turn off the PIDD Interactive Digital Display The PIDD features a 4 3 inch high resolution full color LCD display that provides access to the following information and functions Performance View the speedometer tachometer dual trip meters odometer Operating Conditions View fuel level coolant temperature battery voltage gear position all wheel drive status diagnostics and maintenance warnings Riding Conditions View the clock change display settings Bluetooth Functionality Use Bluetooth enabled communication with cell phone with notification of incoming calls and texts and ability to view battery strength and signal strength GPS Mapping l NOTE The compass is controlled by the GPS system Calibration is not required Use the compass and full featured GPS when the GPS receiver is installed includes the display of latitude longitude and elevation Mark and save waypoints and tracks Security Snowmobiles If security is enabled lock your vehicle using a security code Screen Options Customize s
15. GO PGLARIS INTERACTIVE DIGITAL DISPLAY OWNER S MANUAL O Bluetooth POLARIS Copyright 2015 Polaris Industries Inc All information contained within this publication is based on the latest product information available at the time of publication Product improvements or other changes may result in differences between this manual and the product Depictions and or procedures in this publication are intended for reference use only No liability can be accepted for omissions or inaccuracies Polaris Industries Inc reserves the right to make changes at any time without notice and without incurring obligation to make the same or similar changes to products previously built Any reprinting or reuse of the depictions and or procedures contained within whether whole or in part is expressly prohibited The following are trademarks of POLARIS Industries Inc POLARIS PERC RANGER RIDERX RZR amp AXYS Riderx The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG Inc and any use of such marks by Polaris Industries Inc is under license Other trademarks and trade names are those of their respective owners Printed in U S A PIN 9925416 Table of Contents Welcome Quick Start Guide Interactive Digital Display General Information Display Keys Maps Trails Phone GPS Settings System Setlings Diagnostics PIDD For Snowmobiles G
16. Loader 2 3 20026 0000 Ap 2 7 10182 0003 Bluetooth 5 0 00002 0818 210442 2014 07 28 USA 2014 05 14 us aTv 2014 11 07 Vehicle Modal ZFELBA2000 Initialize Update Key Key2 Key3 Key4 Key5 23 Press Key 3 to exit 24 Perform the following steps for snowmobiles after every update 800 AXYS models Turn the ignition key off Start the engine to allow the PID to automatically initialize AWD indicator will disappear when completed 600 AXYS and all non AXYS models Turn the ignition key off Perform the manual initialization procedure See page 39 75 Manual PIDD Update Use this procedure only in the event of a failed update using the previous procedure 1 2 Delete the formerly downloaded corrupt files from the USB drive Return to RiderX com and download new files See Download the Data on page 70 Tum the ignition key off for at least 10 seconds Connect the flash drive to the USB connector on your vehicle Press and hold any PIDD key while turning the ignition key to the ON RUN position Continue to hold the PIDD key until Booting is no longer displayed Release the PIDD key Return to page 73 and perform steps 13 24 of the Update the PIDD procedure For more assistance See your Polaris dealer Go to RiderX com Go to Polaris com Select your product group and click on the Help link at the upper right comer of the page When the help page displays look for
17. The engine will retum to its normal performance automatically If severe detonation occurs The check engine light begins to flash steadily The PIDD displays Detonation Detected MAG or PTO The engine enters DET latching imp home mode On 2015 800 AXYS models the ECU closes exhaust valves to limit engine power in DET latching mode On all other 2015 AXYS and PRO RIDE models the ECU will shut down the engine during DET latching mode In either event restart the engine to reset the mode For all 2015 AXYS and PRO RIDE models the ECU will shut down the engine during a critical overheat condition 50 Engine Overheat Indicators Temperature Scale The engine temperature scale at the right side of the PIDD screen changes to RED and the check engine temperature indicator at the top left of the screen illuminates when the engine is overheating Take action 1o cool the engine The indicator will flash when engine temperature reaches critical levels Stop the engine immediately NOTE Please see your vehicle owner s manual for more information A flashing indicator indicates continued operation could result in serious engine damage The engine management system will automatically reduce engine power and create a misfire condition Stop the engine immediately Allow the engine to cool down NOTE if engine overheating seems to be caused by something other than poor cooling conditions see your dealer
18. be used Do not use harsh or abrasive cleaners For best results use a microfiber towel to clean the screen Window cleaner or alcohol may be used NOTICE Immediately clean off any gasoline that splashes on the display Storage When preparing the vehicle for storage make sure the ignition switch is in the OFF position to prevent battery drain and a shortened battery life Display Keys Use the five display keys to access the PIDD menus Press and release any key to display the PIDD menu icons at the lower edge of the screen With the menu icons displayed press a specific key to view menu options for that key ooo re ake Mem GPS MANAGER SYSTEM SETTINGS PIDD Menu Icons varies by current screen displayed 10 Key 1 Alternate Home Screen Selection Press any key to display the PIDD screen icons 2 Press Key 1 repeatedly to display each home screen t option Off Road Vehicle Home Screen Options Snowmobile Home Screen Options PRIMARY SECONDARY AUXILIARY AUXILIARY 2 Key 2 Odometer Trip Meter Engine Hours 1 Press any key to display the PIDD screen icons 2 Press Key 2 repeatedly to display each option Odometer ODO Trip Trip 2 Trip Hours TRIP Engine Hours ENG 6 01 PM 55 6700 amp 25 2205 d sac ta H Key Key2 Key4 Key5 Key3 Key 3 Main Menu 1 Press any key to display the PIDD screen ico
19. bove or the word booting will appear on the display 82 GPS antenna not communicated with display DOP window greyed out The HDOP VDOP and TDOP fields are greyed out and there is no position data 1 The antenna is either not powered defective or there is a CAN communication link wiring issue Check pinout on antenna connector No satellite reception DOP values are all zeros CAN communication link between antenna and display is functional but antenna has not yet acquired satellites 1 There will be no speed indication on the display This is normal during the first 30 to 90 seconds after power up if the GPS has been off for several days 2 If the antenna has been off for a few hours the signal should be acquired in a few seconds If satellites are not acquired after several minutes check for clear view of the sky or interfering electrical devices near the antenna 3 If these are ok antenna is possibly defective 83 Poor satellite reception The number of satellites is greater than zero and the PIDD has acquired a signal from each satellite listed but has not calculated a position or the position is not very accurate 7 1 AHDOP number of 100 and no lat lon indicates no position has been calculated If a valid lat lon number is indicated but the HDOP number is still high gt 5 the position will not be very accurate The speed indication on the display will jump around and the position
20. creens Software Upgrades Update software for the life of the vehicle Update the PIDD every 90 days or more often especially before long trips to ensure the most recent trails data is on your PIDD at all times Log in at RiderX com to download the latest software updates If you need assistance please see your Polaris dealer NOTE Trails data expires 90 days from the file s release date If an update is not performed within 90 days a notification screen displays E Maps Trails ae supplied as an aid and should not be used for any Purpose requiring precise measurement of cretion distance or location Polaris makes no warranty as t9 the accuracy or completeness of this map data You assume all risks associated with using the mapstails funcion ee Maps Trails are supplied as an aid and should not be used for any purpose requiring precise measurement of direction distance or location Polaris makes no warranty as to the accuracy or completeness of this map data You assume all risks associated with using the maps trails function General Information Device Operating Requirements Phone functionality is dependent on the capabilities of your cell phone Text messaging functionality may vary depending on your phone s operating system NOTE Some cell phones or operating systems will not work as shown in this manual Care and Maintenance Use a soft cloth to clean the housing Mild soap and water may
21. e unread messages If there are no unread messages since the device was paired No new messages since connected displays 2 Key3 Key1 Key2 Key4 Keys NOTE Most Android phones will display ALL unread messages Other phones may display unread messages only since connection with the display 4 Press Key 2 or Key 4 to toggle through the list 5 Press Key 3 to refresh Bluetooth Not Responding Press Key 3 to reboot or press Key 5 to cancel Bluetooth may not be functional until the device is rebooted Bluetooth has stopped responding correctly A power cycle may be required Would you like to power cycle now Key Key2 Key3 Key4 Key5 65 RIDERX RiderX is the 1 resource for power sports enthusiasts RiderX provides everything you need to enhance your riding experience For the PIDD RiderX provides downloadable trails For more information about all of our free features please visit RiderX com Hardware USB Hardware Recommendations For software updates Polaris recommends using a SanDisk or similar USB flash drive with a minimum of 4G in available memory formatted using the FAT32 file system For assistance search the web for How to format FAT32 For best results remove all files from the flash drive before starting the update process USB Connection Locations NOTICE The USB connection is not designed or intended to support the connection of any phone or device other than
22. ehicle Modal ZFELBA2000 Initialize Update Key Key2 Key3 Key4 Key 7 8 Compare the Trails date on this screen with the date modified of the newly downloaded file on your USB drive or computer pred crm s Ner E gt 9 Continue with the update only if the new file date is more recent than the date listed in the PIDD NOTE Trails data expires 90 days from the file s release date 10 Press Key 5 twice to continue 11 If an error message occurs perform one or all of the following actions to resolve the issue Remove and reconnect the USB flash drive securely Make sure the RiderX files are not inside a folder on the flash drive Make sure only RiderX files are on the flash drive Remove any other files if necessary Try using a different USB flash drive 12 If files are found by the device you ll be prompted to restart in bootloader mode Press Key 3 to confirm Would you like to restart in bootloader mode o 0s Key Key2 Key3 Key4 Key5 72 13 After the restart read the warning message WARNING Maps Trails are supplied as an aid and should not be used for any purpose requiring precise measurement of direction distance of location Polaris makes no warranty as to the accuracy or completeness of this map data 14 Press Key 3 to accept The screen displays the files found on the USB flash drive updste fl Polaris TV480 04252044 2710406 tar gz
23. eneral Snowmobile PIDD Information Initialization Process Left Hand Controls Vehicle Settings Detonation Elimination Technology Engine Overheat Indicators Bluetooth Before Connecting Connection Management Phone Rider Hardware Connect Register and Update Update Process Flow Chart Frequently Asked Questions Troubleshooting 00 00eeseeeee need Welcome Thank you for purchasing a Polaris Interactive Digital Display PID and welcome to the Polaris RiderX family Your PIDD is easy to use and will allow you to customize the information displayed through the use of alternate screen selections The RiderX app gives you the power to plan track and share your rides as well as connect to radar weather rider services and more For a safe and enjoyable riding experience with your new PIDD please read your vehicle s owner s manual and this PIDD owner s manual If you should need additional assistance with PIDD operation or software updates please see your Polaris dealer or visit RiderX com WARNING Do not enter information or adjust this device while operating your vehicle Distracted driving can result in loss of control collision or accident which may result in serious injury or death Avoid using any features and devices while driving that may take your attention away from the road or trail and safe driving habits even for a moment The operator assumes all risk associated with usi
24. for service 51 Bluetooth Before Connecting Compatibility 1 Refer to your phone s user manual before attempting to connect to the PIDD Review how to connect your phone to a Bluetooth device Review the different types of connections offered by your phone manufacturer and how the connection type affects information sharing 2 Verify that your phone is equipped with Bluetooth and that Bluetooth is turned on NOTE Some of the features and functionality of the PIDD may vary due to the operations software on your phone 52 Connection Management Enabling Disabling Bluetooth 1 Press any key to display the PIDD screen icons 2 Press Key 3 to display the main menu options 3 Toggle to PHONE Press Key 3 to select m MAIN MAPS TRAILS PHONE DIAGNOSTICS GPS MANAGER SYSTEM SETTINGS Key 2 Key 1 KeyS Key4 Key5 4 The phone main menu screen displays Key Key2 Key3 Key4 Key 5 Press Key 3 to turn Bluetooth on or off NOTE The display will remember the state of Bluetooth at the next power up It will automatically connect to a paired device following the order set in the priority list 53 Bluetooth Settings 1 With the phone main menu screen displayed press Key 4 to open Bluetooth Settings 2 When the display opens Bluetooth Settings it becomes discoverable to other Bluetooth devices After 5 seconds the display will start searching for devices Oc
25. ge before clearing the current track Key 5 Exit 7 Keyboard Operation 1 Use the display keys to navigate the keyboard Key Key2 Key 1 Move left Key 2 Move up Key 3 Select the letter or number Key 4 Move down Key 5 Move right Key3 Key Key5 Phone Audio Disabled if equipped 1 Press any key to display the PIDD screen icons 2 Press Key 3 to display the main menu options 3 Toggle to PHONE Press Key 3 to select om MAIN MAPS TRAILS PHONE DIAGNOSTICS GPS MANAGER Key Key2 Key3 KeyA Key 18 4 The phone main menu screen displays Key Key2 Key3 Key4 Key 5 Use the display keys to navigate the phone main menu Key 1 Missed Calls Key 2 Text Messages if equipped Key 3 Turn Bluetooth on off Key 4 Bluetooth Settings Key 5 Exit 6 When one of the PIDD main screens is displayed press any key to display the PIDD screen icons Press Key 5 to access the phone menu The diagnostic screen displays if an active fault exists See page 37 07 Key Key2 Key3 Key4 Key5 19 Phone Audio Enabled if equipped 1 Press any key to display the PIDD screen icons 2 Press Key 3 to display the main menu options 3 Toggle to PHONE Press Key 3 to select oe MAIN MAPS TRAILS PHONE DIAGNOSTICS GPS MANAGER SYSTEM SETTINGS A A Key2 Key Key Keys Koy5 If audio is enabled the display will go directly t
26. ilation 2 Toggle to System Settings gt Vehicle Settings gt CHANGE CODE FUEL TYPE LOCK CHANGE CODE Key Key2 Key3 Key4 Key 3 Press Key 3 to select The ENTER CODE screen will display ENTER CODE Key Key2 Key3 KeyA Key 4 Press Key 2 or Key 4 to enter the current 3 digit security code Press Key 5 to toggle to each digit 48 5 After successfully entering the current security code the CHANGE CODE screen will display Enter your new 3 digit security code CHANGE CODE Uo Key Key2 Key3 Key Key5 6 Any ime you change your security code record the new code below for future reference Keep this manual or your security code in a secure location where others will not be able to access your code Code Date Code Date Code Date Code Date NOTE If you lose or forget your code please see your authorized Polaris dealer to have the code reset to the default code 000 Only authorized Polaris dealers may reset a lost or forgotten security code 49 Detonation Elimination Technology DET The DET system prevents damage to the engine from detonation by entering an engine protection mode whenever the DET system is active When excessive detonation is detected the check engine light will illuminate You may notice decreased engine performance and RPM when the DET system is activated In most cases this is temporary and no action is required
27. is feature can be used for only one waypoint at a time 1 Press Key 5 to toggle to the selection list 2 Press Key 4 until Go To is highlighted Press Key 5 to toggle the setting ON or OFF a t o EI Waypoints v D Key Key2 Key3 3 Press Key 5 to exit the map 6 10 PM MAS 25 16 pxizippETR DA Keyi Key2 Key Key Key J NOTE When Go To is ON the orange arrow points to the waypoint that was selected when Go To was turned ON 22 Importing and Exporting Tracks and Waypoints Importing or exporting tracks and waypoints requires a USB drive in the accessory connector An exported file will be a gpx format file that can be read by various devices or imported into mapping software Any files you import must be available on the USB drive at the root level not in a folder and must be gpx format files 1 Enter the desired manager menu Tracks or Waypoints 2 Press Key 5 to toggle to the selection list Toggle to Import or Export Press Key 5 to select 6 40PM 77 gt E Name MRN hide Delete Import Export Key Key2 Key Key Key5 3 Toggle to the desired track or waypoint file name Press Key 5 to select gpx s trall gpx a Key Key2 Key3 Key Keys 23 Press Key 2 to export selected tracks or waypoints Press Key 4 to export all tracks or waypoints Press Key 5 to reject 6 51PM 77 gt E Export Selected Track Key
28. ization process must be performed when the engine is running Not all models require this procedure See page 38 1 Start the engine Do not allow an engine to run in an enclosed area without adequate ventilation 2 Inthe System Settings menu select SYSTEM INFO cow pr 102112 Loader 2 3 20026 0000 2 7 10182 0003 Bluetooth 0 00002 0818 Contig 2 7 10442 2014 07 28 Map data c nta USA 2014 05 14 Trails US ATV 2014 07 07 m Vehicle Model 2FELBA2000 Initialize Update Key Key2 Key3 KeyA KeyS 3 Press and hold Key 1 until the next screen displays Would you like to Initialize Display Engine must be running display will reboot m A E GEs 6 Key Key2 Key3 Key4 Key 39 4 Press Key 3 The display will reboot and begin the configuration process Initialization Complete display will now reboot Left Hand Controls The left hand controls on AXYS and 600 800 PRO RIDE models allow riders to switch screens zoom in or out and drop waypoints without removing their hands from the handlebars WARNING Do not enter information or adjust this device while operating your vehicle Distracted driving can result in loss of control collision or accident which may result in serious injury or death Avoid using any features and devices while driving that may take your attention away from the road or trail and safe driving habits even for a moment The o
29. n the MAPS TRAILS display Each procedure is outlined in detail on the following pages For future reference a condensed version of the entire update process is provided in a flow chart on page 78 NOTE Before updating the PIDD fully charge the vehicle s battery if equipped A 12 volt minimum is required for completing the updates 69 Download the Data 1 Log in at RiderX com 2 Select Digital Displays 3 Select Download Trails Data recommended every 90 days or Download Trails and Map Data recommended seasonally for your vehicle type 4 Accept the User Acknowledgement Choose Save if prompted to Run or Save The download may take several minutes depending on your internet connection speed Copy Files to USB Flash Drive Connect the recommended USB flash drive to the computer used to download updates from RiderX com See page 66 The general procedures for extracting the files and saving them to the USB drive are outlined below Your procedure may differ slightly depending on your computer s operating system NOTE Do not place the extracted files inside a folder on the USB drive Place only the extracted files on the flash drive MAC Computers 1 Locate the downloaded zipped file zip on your computer Double click the file to extract the contents 2 Locate the extracted files and copy them onto the USB flash drive WINDOWS Computers 1 Locate the downloaded executable file exe on your
30. n this device Please read the owner s manual provided with your vehicle values at the existence of electromagnetic radiation CAUTION The speedometer may display incorrect gt 10 Vim Before Riding With Your New PIDD 1 2 3 4 5 Read this entire manual Familiarize yourself with the features and operation of the PIDD while the vehicle is stationary Register for a RiderX account page 68 Register your PIDD page 69 Update trails data or maps trails data to verify that the trails data on the PIDD is current page 69 NOTE Trails data expires 90 days from the file s release date PIDD Features The icon bar at the top of the screen allows quick access to cell phone related information a real time clock and the GPS heading in most situations the GPS and mapping features will function best while the vehicle is outdoors in an open space The GPS signal may be impeded by overhead structures or by being too close to a structure Please follow the installation instructions provided in the accessory kit or see your dealer for assistance Getting Started Use the ignition key to turn the PIDD on or off or to reboot when necessary Models With Battery ON Tum the key to the ON RUN position OFF Tum the Key to the OFF position REBOOT Option i Tum the key OFF for 5 seconds then turn the key to ON RUN Option 2 With the key ON press and hold Display Key 5 for 20 seconds then
31. nnected the Pairing Complete screen displays Pairing Complete access fo your contacts messages and notifications Key Key2 Key3 Key4 Key 7 Press Key 3 to exit Pairing From the Device To pair from the device follow the device s instructions to pair with the display Accept the request on the display when it appears The device will automatically connect affer pairing If an error occurs during pairing or if the pairing is rejected by either device the Pairing Canceled screen displays Ee Pairing Canceled O NNNUNNUNNRNS Key Key2 Key3 KeyA Key 8 Press Key 3 to exit 57 Connecting a Formerly Paired Device 1 To connect a device that was previously paired toggle to the device in the display Press Key 3 Phone 103009 Key Key2 Key3 KeyA Key 2 After connecting the display will request the number of missed calls and update the display NOTE Phone compatibility may vary Some functions are dependent on phone settings that must be set by the user Refer to your phone s user manual for more information Disconnecting a Device To disconnect a device toggle to the device in the display Press Key 3 DENS EET fem ae E Phone E1D3009 Key Key2 Key3 Key4 Key 58 Unpairing a Device 1 If the device is connected disconnect the device before unpairing 2 To unpair a device toggle to the device in the displa
32. ns 2 Press Key 3 to display the main menu options 3 Toggle through the menu Key 2 Toggle up Key 4 Toggle down 4 Use the remaining keys to perform other actions in the main menu Key 1 Toggle between day and night screen brightness See page 28 to adjust brightness levels for both screen options Key 3 Select Key 5 Exit menu 12 Key 4 Battery Voltage Coolant Temperature 1 Press any key to display the PIDD screen icons 2 Press Key 4 repeatedly to display each option Battery Voltage Coolant Temperature NOTE The display will automatically switch to the appropriate bar graph and turn red when a fault is detected S55 6700 13 Key 5 Bluetooth Menu or Diagnostics Menu 1 Press any key to display the PIDD screen icons 2 Press Key 5 to display Bluetooth features If a fault gres Key 5 enters the Diagnostics menu see page 3 Use the display keys to access Bluetooth features Key 1 Phone Key 2 Text Key 3 Toggle Bluetooth on off Key 4 Settings Key 5 Exit menu 4 If Audio is enabled Keys 1 and 2 change to the following Key 1 Audio Key 2 Phone Text 14 Maps Trails View Map 1 Press any key to display the PIDD screen icons 2 Press Key 3 to display the main menu options 3 Toggle to MAPS TRAILS Press Key 3 to select Key Key2 Key3 Key4 Key 4 Use the display keys to access the map features Key 1 Zoom out Key 2 Zoom in Key 3 Display menu Key
33. o the Audio Screen 4 va X w 6 09 PM AN Nothin But A Good Time Poison 50 ox H Key 5 5 Use the keys to control Audio Track and Volume Key 1 Toggle between Volume and Track control Key 2 Volume Down or Previous Track Key 3 Play Pause Key 4 Volume Up or Next Track Key 5 Back to Phone Menu For additional information about the Bluetooth functions see page 44 FT Key Key2 Key3 Key 20 GPS Manager 1 Press any key to display the PIDD screen icons 2 Press Key 3 to display the main menu options 3 Toggle to GPS MANAGER Press Key 3 to select 4 Toggle through the menu Track Manager Waypoint Manager Satellite Status 5 Press Key 3 to select OO 09 54 AM TRACK MANAGER j WAYPOINT MANAGER a ET SATELLITE STATUS Key Key2 Key3 Key4 Key Track Manager Waypoint Manager The Track Manager allows you to edit a track name hide or display a track and import or export a track Track Manager also displays the Track distance and Time on Track for selected tracks The Waypoint Manager allows you to edit delete import or export a waypoint or view a saved waypoint on the map 21 When Go To is turned ON in the Waypoint Manager an arrow displays on the map pointing in the direction of the selected waypoint The distance to the waypoint is shown in the lower right hand corner of the display and is based on shortest possible distance to waypoint as the crow flies Th
34. perator assumes all risk associated with using this device Please read the owner s manual provided with your vehicle 40 MODE and SET Switch Pressing the MODE and SET switches quickly press release or slowly hold 2 seconds or longer allows riders to change a variety of display options The functionality of each switch is based on the screen the PIDD is displaying at the time Switch functions are outlined in the following tables Review these tables to become familiar with the functions of each switch i P Switch Functions While Viewing Maps Quick Press Release Slow Hold 2 Seconds Switch Motion Result Speed SET Siow Toggle between MAPS TRAILS and MAIN screens SET Ouk Zoom IN MODE Quick Zoom OUT J MODE Siow Drop waypoint at current location Switch Functions While Viewing Main Screens Quick Press Release Slow Hold 2 Seconds Switch Motion Result Speed SET Siow Toggle between MAPS TRAILS screen and MAIN screens SET Quick Toggle between Battery Voltage and Coolant Temperature MODE Quick Toggle between Odometer Trip 1 and Trip2 MODE Siow Clear the current trip meter 4 Vehicle Settings 1 Press any key to display the PIDD screen icons 2 Press Key 3 to display the main menu options 3 Toggle to System Settings Press Key 3 to select a Vw SAM DISPLAY SERVICE TIME SYSTEM INFO VEHICLE SETTINGS Em
35. ror occurs during the request an error message screen displays Press Key 3 to accept Data Request Timeout Key Key2 Key3 Key4 KeyS For a Data Request Timeout message press Key 3 to repeat the request For a Data Error from Phone message verify that your phone is compatible and that Bluetooth is turned on before repeating the request 62 3 If the phone is compatible the screen displays the most recent missed calls up to 20 or No Missed Calls First Last 2a or Key1 Key2 Key3 Key Key 4 Press Key 2 or Key 4 to toggle through the list 5 Press Key 3 to refresh the list View Unread Text Messages List 1 With the phone main menu screen displayed press Key 2 to request unread text messages The screen displays the text message symbol and Reading Data D Reading Data Key Key2 Key3 KeyA Key 63 Text Messages while navigating either menu press Key 1 2 If an error occurs during the request an error message screen displays NOTE To switch between Missed Calls and Unread Key Key2 Key3 Key4 Key Data Request Timeout Press Key 3 to accept Press Key 1 to repeat the request Data Error from Phone Press Key 3 to accept Verify that your phone is compatible and that Bluetooth is turned on before repeating the request 64 3 If the phone is compatible the screen will display a list of th
36. rt a new track Up to 10 tracks can be saved How can I select different fuel types on the display for my snowmobile A Refer to Fuel Type Selection on page 43 79 How do I set the security function on the display for my snowmobile A Refer to Lock the Ignition on page 45 How do I connect my phone via Bluetooth to the PIDD A Refer to Bluetooth on page 52 Refer to the phone s user manual for specific Bluetooth functionality How do I change the screen brightness from day to night mode A Option 1 While viewing the main menu screen press Key 1 to switch between Day Night mode Option 2 Main Menu gt System Settings gt Display gt Day Night j How do I find what version of software my display currently has A Main Menu gt System Settings gt System Info gt Config File How do I set the clock on my display A Option 1 Make sure the time zone GMT offset and daylight savings mode is correct for your location if in GPS mode See page 32 GPS automatically sets the clock when there is a locked GPS signal Option 2 Main Menu gt System Settings gt Time What happens if I lose or forget my security code for my snowmobile A Ifyou lose or forget your code please see your authorized Polaris dealer to have the code reset to the default code 000 Only authorized Polaris dealers may reset a lost or forgotten security code 80 Troubleshooting Screen Locked Frozen 1 Rese
37. s Key 3 to confirm a change or reset the existing interval oat Ce ASAM Reset Service Hours 25H z Key Key2 Key3 Key4 Key 29 4 Press Key 2 to view additional odometer information Odometer Oil Life 6 50PM 77 gt E Engine Hours Odometer iLife A Key 2 Key5 Key3 Key4 Key 1 5 Press Key 5 to reset Oil Life A warning displays at startup if vehicle milage exceeds the Oil Life Milage J NOTE initial Oil Milage Warning is set to go off at 500 miles After first reset Oil Milage Warning will display every 1000 miles 30 Units The units can be set to display U S customary units or the International System of Units metric and a 12 hour clock or a 24 hour clock 1 In the System Settings menu select UNITS Speed Temperature Clock a CO TOOT AM Speed MPH Temperature Fahrenheit Clock 12 Hour Key Key2 Key3 Key4 Key 2 Toggle to the desired setting 3 Press Key 1 or Key 5 to change the setting 4 Press Key 3 to exit 81 Time 1 In the System Settings menu select TIME Source GPS satellites GMT Greenwich Mean Time Offset DST Daylight Savings Time Enable Disable Source GMT Offset 6 pst Disabled Key Key2 Key3 Key4 Key 2 Toggle to the desired setting NOTE Enabling DST adds one hour regardless of the date DST does not automatically update and must be selected by the rider 3
38. stall USB drive Verify update in to vehicle connector SYSTEM INFO Tum key to ON RUN Verify update in Start engine if no battery MAPSITRAILS display Navigate to Initialize SYST M INFO Snowmobiles only 78 Frequently Asked Questions How do I register my device A Log in at RiderX com to register your device and receive access to maps and trails updates See page 69 How do I update my trails map on my display A Log in at RiderX com to download the latest MAPS TRAILS data Then transfer the files to the PIDD using a USB flash drive Refer to Update TRAILS or MAPS TRAILS Data on page 69 How do I find the USB connection on my specific vehicle A Refer to USB Connection Locations on page 66 How can I place name and save a waypoint A Refer to GPS Tracks Map on page 16 Why does my display not acquire satellite signal or GPS A The GPS can take a few minutes to lock from a cold start After warm up if less than 4 satellites are shown in the GPS satellite screen move the vehicle to an area free of overhead obstructions Refer to GPS Settings on page 21 How can I save import and export a track or waypoint A Refer to GPS Tracks Map on page 16 or Importing and Exporting Tracks and Waypoints on page 23 I get a Memory Full warning while in the MAPS TRAILS screen what should do A Youare reaching the limit allowed for an individual track Save the current track and sta
39. the recommended USB drive The vehicle s USB connection is designed to support PIDD updates and allow the user to upload and download tracks and waypoints RZR Models The USB connector if equipped is located behind the storage compartment glove box on the dash 66 RANGER Models The USB connector if equipped is located inside the glove box ATV Models The USB connector if equipped is located on the front side of the right handlebar controls AXYS Snowmobile Models The USB connector if equipped is located under the hood near the rear of the hood vents Open the right side panel to access the connector 67 Connect Register and Update Connect Your Smartphone to the PIDD The PIDD can be used with most smartphones RiderX can be used to provide trail data for the PIDD device Before registering and connecting the PIDD to RiderX use the following steps to connect your smartphone to the PIDD 1 Open your phone s Bluetooth menu and make your phone discoverable 2 On the vehicle tum the ignition key to the ON RUN Position The engine does not have to be running 3 View the Bluetooth settings on your phone The PIDD Connect Bluetooth Adapter should appear as Polaris 4 44 the last 4 digits of the adapter s address 4 When the adapter is visible select it to connect your phone to the adapter 5 Launch the PIDD and verify that the connection status bar indicates the
40. to display the PIDD screen icons Press Key 3 to display the main menu options Toggle to System Settings Vehicle Settings LOCK Press Key 3 to select The ENTER CODE screen will display ROR ENTER CODE Key Key2 Key3 Key4 KeyS 45 6 Press Key 2 or Key 4 to enter the current 3 digit security code Press Key 5 to toggle to each digit 7 If the code is not accepted a BAD CODE screen will display BAD CODE 8 Follow the prompts and re enter the current security code When the code is accepted the locked symbol and ENTER CODE screen displays The ignition is locked ENTER CODE Key Key2 Key3 KeyA Key 46 Unlocking the Ignition 1 Start the engine The locked symbol and ENTER CODE screen displays Do not allow an engine to run in an enclosed area without adequate ventilation 2 Press Key 2 or Key 4 to enter the current 3 digit security code Press Key 5 to toggle to each digit 3 If the code is not accepted a BAD CODE screen will display Follow the prompts and re enter the current security code BAD CODE 4 When the code is accepted the unlocked symbol and SECURE OFF screen displays The ignition is now unlocked amp SECURE OFF 47 Change Security Code The first time you change the security code enter the default security code 000 at step 4 1 Start the engine Do not allow an engine to run in an enclosed area without adequate vent
41. tthe PIDD by pressing and holding KEY 5 for 20 seconds Screen Goes Black During Update Typical caused by a failed update or corrupted file on USB flash memory drive IMPORTANT Formatting the flash drive will erase all of its contents 1 Remove flash drive and re format as FAT 32 2 Re download latest update files from RIDER X website 3 Verify downloaded files are not in a folder on the flash drive and non PIDD files are cleared from drive 4 Turn off PIDD with key switch disconnect battery power or turn off engine if applicable and wait for at least 10 seconds 5 Plug USB drive into USB port 6 Press and hold any key on keypad and then turn on PIDD 7 Once Booting is no longer shown on the screen release the key button 8 The PIDD will go into bootloader mode Use the PIDD key buttons to select the update file on the flash drive and install 8i White Screen If the following screen is displayed after the PIDD turns on the PIDD was inadvertently left in the diagnostics mode during manufacture testing 1 To exit this mode push and hold KEY 5 until the PIDD reboots 2 After re booting the PIDD update the PIDD with the most current software and applicable RIDER X trails and maps software Booting Screen A booting screen is displayed when the PIDD is powered on Depending on the model and version of firmware loaded on the PIDD the booting screen will appear as a circular icon shown a
42. y Service Units Time System Info Vehicle Settings Media if equipped 5 Press Key 3 to select 27 Display 1 In the System Settings menu select DISPLAY 2 Toggle to the desired setting Day Night Auto mode Brightness level Language Demo enable disable aC STAM Day Night Day Brightness Language Demo Disabled Enabled Key 5 Key Key2 Key3 Key 3 Press Key 1 or Key 5 to change a setting NOTE if Day is selected changing the brightness will change the day mode brightness level If Night is selected changing the brightness will change the night mode brightness level automatically switch between Day and Night modes NOTE if Auto is selected the display will based on time of day and day of year 4 Press Key 3 to exit 28 Service and Engine Hour Information Not Available for Snowmobiles 1 In the System Settings menu select SERVICE Engine Hours displays hours of engine operation since manufacture Interval is an editable setting that provides a service reminder at the set interval Interval can be set to any 5 hour increment between OFF and 100 hours Hours to Service displays hours remaining to reach the set service interval 2 Press Key 5 to reset Engine Hours Interval Hours to Service Odometer A Key 2 Key1 Key3 Key4 KeyS 3 Press Key 2 to increase the interval or Key 4 to decrease the interval if desired Pres
43. y Press Key 3 to unpair 3 The confirmation screen displays Press Key 3 to confirm Forget this device Please make sure to forget the device from your phone as well Key1 Key2 Key3 KeyA Key 59 Changing Device Automatic Connection Priority 1 To change which device automatically connects toggle to the desired device in the display Press Key 1 to display the priority screen a Key3 Key Key2 Key4 Key 2 Press Key 3 to move the selected device up the list Phone Nexus 5 EX Key3 Key Key5 Key Key2 3 Press Key 5 to exit 60 Phone Ifa phone call is received while the phone is connected the caller s name if available or phone number if supported displays Press Key 5 to acknowledge and remove the notification First Last Key2 Key Key3 Key Key NOTE If the text messaging symbol in the upper left corner of the display does not illuminate in white the device is either not connected or not compatible with this feature Check your phone s text notification settings to make sure this feature is enabled 61 View Missed Calls List 1 With the phone main menu screen displayed press Key 1 to request missed calls The screen displays the phone symbol and Reading Data Reading Data Key Key2 Key3 Key4 Key NOTE To switch between Missed Calls and Unread Text Messages while navigating either menu press Key 1 2 Ifan er
Download Pdf Manuals
Related Search