USER MANUAL FOR TAS-36EHU
Contents
1. Trouble Fuse blows frequently or circuit breaker trips frequently Other objects or water fall into the air conditioner The remote controller won t work or works abnormally If one of the following code appears on the display area EO E1 E2 E3 or PO P1 P2 P3 Malfunctions Cause What should be done Unit does not start Power cut Wait for power to be restored Unit may have become unplugged Check that plug is securely in wall receptacle Fuse may have blown Replace the fuse Battery in Remote controller may have been exhausted Replace the battery The time you have set with timer is incorrect Wait or cancel timer setting Unit not cooling or heating Cooling heating models only room very well while air flowing out from the air conditioner Inappropriate temperature setting Set temperature correctly For detailed method please refer to Using remote control section Air filter is blocked Clean the air filter Doors or Windows are open Close the doors or windows Air inlet or outlet of indoor or outdoor unit has been blocked Clear obstructions away first then restart the unit Compressor 3 or 4 minutes protection has been activated Wait If the trouble has not been corrected please contact a local dealer or the nearest customer service center Be sure to inform them of the detailed m2. 3 minutes after it stops Anti cold air Cooling and heating models only The unit is designed not to blow cold air on HEAT mode when the indoor heat exchanger is in one of the following three situations and the set temperature has not been reached A When heating has just starting B Defrosting C Low temperature heating The indoor or outdoor fan stop running when defrosting Cooling and heating models only Defrosting Cooling and heating models only Frost may be generated on the outdoor unit during heat cycle when outdoor temperature is low and humidity is high resulting in lower heating efficiency of the air conditioner e During this condition air conditioner will stop heating operation and start defrosting automatically The time to defrost may vary from 4 to 10 minutes according to the outdoor temperature and the amount of frost build up on the outdoor unit 2 h white mist coming out from the indoor unit A white mist may generate due to a large temperature difference between air inlet and air outlet on COOL mode in an indoor environment that has a high relative humidity A white mist may generate due to moisture generated from defrosting process when the air conditioner restarts in HEAT mode operation after defrosting 3 Low noise of the air conditioner You may hear a low hissing sound when the compressor is running or has just stopped running This sound is the sound of the refrigerant flowing or coming to a stop You can al
3. Pus isk vean abana When The Air conditioner shall be installed in accordance with the national wiring regulation The equipment fulfills the requirements in EN 61 0003 11 and is Subject to conditional connection to the mains supply authority may only be connected to a mains supply with a system impedance of less than 0 3 ohm Thon metre to irc p rt may bo tes furl CONDITIONER MANG CTURER AIR CONDITIONER LIMITED WARRANTY STATEMENT R22 amp R410A SYSTEMS Turbo air Inc warrants R22 amp R410A products conforms to the manufacturers specifications and will be free of defects in material and workmanship and should any defect occur Turbo air Inc will correct the defects subject to the following conditions PARTS for a period of 26 months from said date of sale or 24 months from said date of installation for the residential installation For commercial installation one year Turbo air Inc will supply new or at its option rebuilt replacement parts COMPRESSOR for a period of five years from said date of sale or installation for residential installation For commercial installation one year Turbo air Inc will supply new compressor REMOTE CONTROL for a period of 26 months from said date of sale or 24 months from said date of installation Whichever is later Turbo air Inc will exchange with a new remote control PROOF OF PURCHASE Copy of the proof of purchase is required to make this warranty valid Or valid manufactu
4. Turbo Air Inc for additional instructions If Unit is Installed Improperly The manufacturer shall in no way be responsible for improper instal lation or maintenance service including failure to follow the instruc tions in this manual Posuten Whelan Do not plug in the unit until all connections tubing drain hose mounting etc have been made and double checked High voltages are present in this unit and are very dangerous Please refer to these instructions and diagrams when wiring heath hers aad gordig n am dote Tun must be grounded in accordance wih hal lc T rnn TAPETE DURER lain E Ceu e S anes V IR eee ree Tr tarapoing Se ii ive ANA DU GU hb becuse the units are heavy NR Precautions When When Installing ion inim M d cling val vaa nin fe cultui strong enough to hold the unit s weight A frame may be necessary for added support When installing in a room make sure the tubes become well insulated to protect the walls and fumiture from sweating of the When installing in moist or uneven locations make sure to use a raised level concrete pad of concrete blocks to provide a level S ee vti I Min belii an ir GA winds ns SANA anchor the outdoor unit down with bolts and a metal frame When Tubing Keep all tubing as short as possible Use the flare method for tubing Apply refrigerant lubricant to the matching surfaces of the flare and aa n ir li sd making sure not lo overtighten poc
5. direction Perform this function while the unit is in operation Use the remote controller to adjust the air flow direction The horizontal louver can be moved at a range of 6 for each press or swing up and down automatically Please refer to the REMOTE CONTROLLER OPERATION MANUAL for details To set the horizontal air flow direction left right e Move the vertical louver manually to adjust the air flow in the direction you prefer IMPORTANT Before adjusting the vertical louvers the supply power must be disconnected e For some models the vertical louver can be adjusted by using the remote controller Please refer to the REMOTE CONTROLLER OPERATION MANUAL for details CAUTION e Do not operate the air conditioner for long periods with the air flow direction set downward in cooling or dehumidifying mode Otherwise condensation may occur on the surface of the horizontal louver causing moisture to drop on to the floor or on furnishings e Do not move the horizontal louver manually unless it is necessary Always use the remote controller e When the air conditioner is started immediately after it was stopped the horizontal louver might not move for approximately 10 seconds e Open angle of the horizontal louver should not be set too small as COOLING or HEATING performance may be impaired due to too restricted air flow area e Do not operate unit with horizontal louver in closed position When the air con
6. states do not allow limitation on how long an implied warranty lasts therefore these limitations or exclusions may not apply to you This limited warranty gives you specific legal rights You may also have other rights that may vary from state to state This warranty applies to the United States Canada The design and specifications are subject to change without prior notice for product improvement Consult with the sales agency or manufacturer for details 2020001B4105
7. tion et l utilisation de ce climatiseur 4 Pour les caract ristiques de l appareil r f rez vous sa plaque signal tique INSTRUCCIONES DE INSTALACION DEL AIRE ACONDICIONADO Comentario de la Directiva 89 336 EEC de la EMC ee arco copa e iu ndn p oot tame lane DR NE MCN ap liene que ser de baja impedancia Normalmente la impedancia eese ova end punio Ge de E tate dd do acondicionado tiene que ser de 16A maximol 2 Ning n otro equipo debe ser conectado a esta l nea el ctrica 3 Pa norms dca do eic por lavor cele cuna co su sumrisiador ere i ene que apicar resioone para productos como lavadoras aire acondicionado u homos el ctricos i 4 Para detalles sobre las alimentaci n el ctrica del aire acondicionado consulte la placa de datos del aparato ANWEISUNGEN ZUR INSTALLATION DER RAUM KLIMAANLAGE Hinweis entsprechend EMV Direktive 89 336 EEC nup wiviihur Vaud SUAM VE Wr o Anweistingen zur installation f r die mt an Hcet verom verden De Aw n ni dig inpedn aus gef hrt werden Normalerweise ist die erforderliche niedrige impedanz bei einem Sicherungsanschlu amp punkt von Erreger ee 3 Seitens der lokaten bestehen m glicherweise Einschr nkungen f r Produkte wie Waschmaschinen Klimaanlagen elektrische Jem 4 Einzelheiten ber die elektrischen Daten der Kimaanlage ersehen Sie auf dem Typenschild des Gerates INSTRUZIONI PER L INSTALLAZIONE DEL CONDIZIONATORE D ARIA PER STANZE NOTA DELLA DIR
8. ETTIVA EMC 89 336 EEC Allo scopo di prevenire effetto di FLICKER variazione della luce alla partenza del compressore durante l installazione seguire punti sot toelencali condiioraiore deve estore fallo con una tres prefereiadalo diuitamerie ai quadro principal o RON EENERA peril condizionatore usare un fusibile da 16 A max 2 Nessun altro apparecchio elettrico 3 Per maggiori dettagli circa I accettazione del installazione del condizionatore fare riferimento al contratto con I Ente erogatore dell E QM AS QD CONO 4 Per le informazioni relative ai dati di allmentazione del condizionatore fare riferimento all etichetta posta sul prodotto SAFETY INSTRUCTIONS PLEASE READ THE FOLLOWING SAFETY INSTRUCTIONS BEFORE INSTALLING AND OPERATING THE UNIT This air conditioner meets strict safety and operating standards The installer of this unit must install or service this unit so it operates safely and efficiently i dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle L is intended to alert the user to the presence of important Contact Installer if Necessary The installation instructions are for a experienced installer If you are not an installer contact a local installer for help If you require help with service contact your certified dealer or
9. L button under the front panel and the open angle of the horizontal louver will be restored to the standard angle when the condensed water forms on the horizontal louver 10 Lightning or a car wireless telephone operating nearby may cause the unit to malfunction Disconnect the unit with power and then re connect the unit with power again Push the ON OFF button on the remote controller to restart operation 11 The protection of outdoor low temperature on some models The protection of outdoor low temperature can be activated only in the HEATING mode The unit will stop operating and display P3 on the LCD window of the indoor unit when the outdoor temperature is or lower than 5 F 15 C for one hour but the indoor unit in this situation can still receive the signal from the remote controller The unit will restart automatically with all the previous settings preserved by the memory function when the outdoor temperature is or higher than 11 F 12 C for 10 minutes and the compressor stop operating for more than one hour or when the outdoor temperature is or higher than 41 F 5 C for 10 minutes Troubleshooting Tips TROUBLESHOOTING TIPS If one of the following faults occurs stop the air conditioner immediately disconnect the power and then connect it in again If the problem still exists disconnect the power and contact the nearest customer service center OPERATION indicator or other indicators continue flashing
10. Q Never do this L O Always do this Jj WARNING Do not operate or stop the Do not damage or use an unit by switching on or offf unspecified power cord the power Otherwise it may cause t may cause electric shock It may cause electric shock electric shock or fire due to or firedue to heat generation or fire excess heat generation Do not operate with wet 9 Do not direct airflow at hands or in damp room occupants only environment GDo not modify power cord t may cause electric shock It may cause electric shock This could damage your with the power properly length or share the outlet with other appliances or fire due to heat generation health OP NIIEVENSIEI TENIS OA mie acc monde OMAN EVASIT CUN CIO earthing into electric parts breaker and a dedicated power circuit No earthing may cause e t may cause failure of No installation may cause electric shock machine or electric shock fire and electric shock Disconnect the power if GDo not drink water drained BG Do not open the unit strange sounds smell or from air conditioner during operation smoke comes from it t may cause fire and t contains contaminants and It may cause electric shock electric shock could make you sick Use the correctly rated breaker or fuse Do not use the power cord 9 Do not disassemble or close to heating appliances mod
11. When using this air conditioner in the European countries the following informations must be followed DISPOSAL Do not dispose this product as unsorted municipal waste Collection of such waste separately for special treatment is necessary It is prohibited to dispose of this appliance in domestic household waste For disposal there are several possibilities A The municipality has established collection systems where electronic waste can be disposed of at least free of charge to the user B When buying a new product the retailer will take back the old product at least free of charge C The manufacture will take back the old appliance for disposal at least free of charge to the user D As old products contain valuable resources they can be sold to scrap metal dealers Wild disposal of waste in forests and landscapes endangers your health when hazardous substances leak into the ground water and find their way into the food chain SAFETY PRECAUTIONS To prevent injury to the user or other people and property damage the following instructions must be followed Incorrect operation due to ignoring of instructions may cause harm or damage The seriousness is classified by the following indications A WARNING This symbol indicates the possibility of death or serious injury CAUTION This symbol indicates the possibility of injury or damage to property Bl Meanings of symbols used in this manual are as shown below
12. alfunctions and unit model Notes Do not attempt to repair the unit yourself Always consult an authorised service provider ROOM AIR CONDITIONER INSTRUCTION Remark per EMC Directive 89 336 EEC To prevent flicker impressions during the start of the compressor technical process following installation conditions do apply 1 The power connection for the air conditioner has to be done at the main power distribution This distribution has to be of an low impedance Normally Se ee cate ee ee ee 2 No other equipment has to be connected to this power 3 For detailed installation acceptance Miete ie C vex aika a If restrictions do apply for products like washing machines air conditioners or electrical ovens 4 For power details of the air conditioner refer to the rating plate of the product CONSIGINES D INSTALLATION RACCORDEMENT ELECTRIQUE Remarques relatives a la Directive EMC 89 336 CEE Pour eviter les ph norm nes de scintillements variation de lumi re et les parasites lors du d mmarrage du compresseur respecter les consignes d installation d crites dans le mode d emploi 1 Le raccordement au secteur doit tre fait l aide d un cable de section suffisante pour eviter tout chauffement de celui ci et les chutes de tension section recommand e Mota pu un tab cu aM d 10A 2 Aucun autre appareil ne doit tre connect sur cette ligne 3 En cas de doute ou de difficult contactez votre agence EDF ee ee wi
13. ce to crack or deform Never use water hotter than 40 C 104 F to clean the front panel it could cause deformation of discoloration Cleaning the air filter A clogged air filter reduces the cooling efficiency of this unit Please clean the filter once every 2 weeks 1 Lift the indoor unit panel up to an angle until it stops with a clicking sound 2 Take hold of the handle of the air filter and lift it up slightly to take it out from the filter holder then pull it downwards 3 Remove the AIR FILTER from the indoor unit e Clean the AIR FILTER once two weeks e Clean the AIR FILTER with a vacuum cleaner or water then dry it up in cool place CARE AND MAINTENANCE AS mw mm A 3 7 Use C C LA 4 Remove the Air Freshening Filter from its support frame on some models The optional filter include Plasma Dust Collector Silver lon filter Bio filter Vitamin C filter 3M air purifier filter etc The removing and installation methods are slightly different see the pictures marked and O on the left Clean the air freshening filter at least once a month and replace it every 4 5 months Clean it with vacuum cleaner then dry it in cool place A Do not touch the Plasma Dust Collector Filter within 10 minutes after opening t
14. code or protection code onl QW DEFROST indicator For Cooling amp Heating models only This indicator illuminates when the air conditioner starts defrosting automatically or when the warm air control feature is activated in heating operation Signal receptor 4 CLEAN AIR indication lamp Lights up when CLEAN AIR feature is activated OPERATING INSTRUCTIONS NOTE This manual does not include Remote Controller Operations see the lt lt Remote Controller Instruction gt gt packed with the unit for details Operating temperature Mode Cooling operation Heating operation Drying operation Temperature Room temperature gt 17 C 62 F lt 30 C 86F gt 10 C 50 F 0 C 50 C Duo i 32 F 122F 15 C 30 C 0 C 50 C utdoor temperature a DS lt r B 15C 50C 5F 122F 9 P786 P Q2 T 122T For the models with low temperature cooling system NOTE 1 Optimum performance will be achieved within these operating temperatures If air conditioner is used outside of the above conditions certain safety protection features might come into operation and cause the unit to function abnormally 2 Room relative humidity less than 80 If the air conditioner operates in excess of this figure the surface of the air conditioner may attract condensation Please sets the vertical air flow louver to its maximum angle vertically to the floor and set HIGH fan mode Suggestion For the unit adop
15. ditioner is connected to power initial power the horizontal louver may generate a sound for 10 seconds this is a normal operation OPERATING INSTRUCTIONS How the air conditioner works SLEEP operation 7 hours timer off Set Temperature 1 C 2 F 1 hour 1 four Cooling SLEEP operation 7 hours timer off Set rem Temperature MOT ELI 1hour 1hour Heating AUTO operation When you set the air conditioner in AUTO mode it will automatically select cooling heating cooling heating models only or fan only operation depending on what temperature you have selected and the room temperature The air conditioner will control room temperature automatically round the temperature point set by you If the AUTO mode is uncomfortable you can select desired conditions manually SLEEP operation When you push SLEEP button on remote controller during cooling heating cooling amp heating models only or AUTO operation the air conditioner will automatically increase cooling or decrease heating 1 C 2 F per hour for the first 2 hours then hold steady for the next 5 hours after that it will switch off This characteristic maintains both enery saving and comfort in night operation DRYING operation The fan speed will be automatically controlled under dry operation During the dry operation if the room temperature is lower than 10 C 50 F the compressor stops operation and restar
16. he front panel it may cause an electric shock 5 Install the air freshening filter back into position 6 Insert the upper portion of air filter back into the unit taking care that the left and right edges line up correctly and place filter into position Maintenance If you plan to idle the unit for a long time perform the following 1 Operate the fan for about half a day to dry the inside of the unit 2 Stop the air conditioner and disconnect power Remove the batteries from the remote controller 3 The outdoor unit requires periodic maintenance and cleaning Do not attempt to do this yourself Contact your dealer or servicer Checks before operation Check that the wiring is not broken off or disconnected Check that the air filter is installed e Check if the air outlet or inlet is blocked after the air conditioner has not been used for a long time AN Caution Do not touch the metal parts of the unit when removing the filter Injuries can occur when handling sharp metal edges Do not use water to clean inside the air conditioner Exposure to water can destroy the insulation leading to possible electric shock When cleaning the unit first make sure that the power and circuit breaker are turned off OPERATION TIPS The following events may occur during normal operation 1 Protection of the air conditioner Compressor protection The compressor can t restart for
17. ify unit e There is risk of fire or e t may cause fire and t may cause failure and electric shock electric shock electric shock Ventilate room before operating air Do not use the power cord near conditioner if there is a gas leakage flammable gas or combustibles such from another appliance as gasoline benzene thinner etc Td It may cause explosion fire and burns t may cause an explosion or fire e G When the air filter is to be removed do not touch the metal parts of the unit 9 t may cause an injury When the unit is to be cleaned switch off and turn off the circuit breaker e Do not clean unit when power is on as it may cause fire and electric shock it may cause an injury Stop operation and close the window in storm or hurricane Operation with windows opened may cause wetting of indoor and soaking of household furniture Do not use strong detergent such as wax or thinner Use a soft cloth for cleaning Appearance may be deteriorated due to change of product color or scratching of its surface G Do not place heavy object on the power cord and take care so that the cord is not compressed There is danger of fire or electric shock SAFETY PRECAUTIONS CAUTION Do not clean the air conditioner with water Water may enter the unit and degrade the insulation It may cause an electric shock G Do not put a pet or house plant whe
18. ndoor unit during heating operation When the outdoor temperature falls heat drawn in by the air conditioner decreases accordingly At the same time heat loading of the air conditioner increases due to larger difference between indoor and outdoor temperature If a comfortable temperature can t be achieved by the air conditioner we suggest you use a supplementary heating device Auto restart function Power failure during operation will stop the unit completely For the unit without Auto restart feature when the power restores the OPERATION indicator on the indoor unit starts flashing To restart the operation push the ON OFF button on the remote controller For the unit with Auto restart feature when the power restores the unit restarts automatically with all the previous settings preserved by the memory function For some models the machine is special designed with Auto restart function for the open angle of the horizontal louver Power failure during operation or pressing the ON OFF button on the remote controller will stop the unit completely When the power restores or pressing the ON OFF button on the remote controller again the unit restarts automatically with all the previous settings including the open angle of the horizontal louver by the memory function So we strongly suggest that the open angle of the horizontal louver should not be set too small in case the condensed water forms and drops from the horizontal louver Press the AUTO COO
19. oor unit 1 Signal receptor 2 Display panel 3 Panel frame 4 Chassis 5 Front panel 6 Horizontal louver 7 Vertical louver on some models 8 Air filter under the panel 9 Manual control button 10 Remote controller holder 11 Remote controller 12 Connecting pipe 13 Drain hose Outdoor unit 14 15 16 Connecting cable Connective pipe Stop valve NOTE All the pictures in this manual are for explanation purpose only Your air conditioner may be slightly different The actual shape shall prevail OPERATING INSTRUCTIONS LED display panel The display panel of the air conditioner you purchased would look like one of the following TIMER indicator This indicator illuminates when TIMER program is set ON OFF d eu AUTO indicator This indicator illuminates when Signal the air conditioner is in AUTO receptor 1 operation e E iil OPERATION FREQUENCY indicator This display is separated into five zones The zones illuminate based on the e v compressor current operation For example high frequency will illuminate Signal more zones receptor 2 B TEMPERATURE indicator A Usually it displays the temperature settings When change the setting temperature this indicator begins to flash and stops 20 seconds later B It displays the room temperature Signal when the air conditioner is in FAN receptor 3 only operation C Displays the malfunction
20. re it will be exposed to direct air flow e This could injure the pet or plant G Do not place obstacles around air inlets or inside of air outlet e t may cause failure of appliance or accident Ensure that the installation bracket q the outdoor appliance is not damag due to prolonged exposure f bracket is damaged there is concern of damage due to falling of unit Use caution when unpacking and installing Sharp edges could cause injury Ventilate the room well when used together with a stove etc An oxygen shortage may occur Do not use for special purposes e Do not use this air cond itioner to preserve preci sion devices food pets Hans and art objects t may cause deterioratio of quality etc Turn off the main power switch when not using the unit for a long time t may cause failure of product or fire Always insert the filters securely Clean filter once every two weeks Operation without filters may cause failure OR water enters the unit turn the unit off and disconnect the power contact a qualified service technician OPERATING INSTRUCTIONS Parts names Indoor unit Note The indoor unit you purchased may look like one of the following Air inlet 2 1 4 Air outlet A B Outdoor unit Air inlet side ir inlet rear Ind
21. re serial number of unit THIS WARRANTY DOES NOT COVER LABOR or e Shipping damage e System installation e Unpacking and or removal of protective shipping material e Usage outside manufacturer s limitations as specified in the owner s manual e Service required as a result of improper installation incorrect or insufficient AC supply voltage e Installation set up or adjustments of consumer controls e Any owner than the original owner e Damage from modification or incorporation into other products e Any failure loss damage or person injury due to accident neglect or abuse by the consumer or to improper operation maintenance or storage or to alteration or to failure to follow normal procedures as outlined in the instruction manual e Any unit purchased from an unauthorized dealer any online retailer or not directly from turbo air e Transportation charges incurred in connection with warranty service e Indirect consequential or special damages except as required by Federal or State laws e Repair or replacement of warranted part by other than qualified installer THE WARRANTY AND REMEDY STATED ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESSFOR A PARTICULAR PURPOSE SOME LAWS DO NOT ALLOW EXCLUSION OF IMPLIED WARRANTY THEREFORE THIS WARRANTY SHALL BE DEEMED MODIFIED TO BE CONSISTENT WITH SUCH LAWS Some
22. so hear a low squeak sound when the compressor is running or has just stopped running This is caused by heat expansion and cold contraction of the plastic parts in the unit when the temperature is changing Anoise may be heard due to louver restoring to its original position when power is first turned on 4 Dust is blown out from the indoor unit This is a normal condition when the air conditioner has not been used for a long time or during first use of the unit 5 A peculiar smell comes out from the indoor unit This is caused by the indoor unit giving off smells permeated from building material from furniture or smoke 6 The air conditioner turns to FAN only mode from COOL or HEAT For cooling and heating models only mode When indoor temperature reaches the temperature setting on air conditioner the compressor will stop automatically and the air conditioner turns to FAN only mode The compressor will start again when the indoor temperature rises on COOL mode or falls on HEAT mode For cooling and heating models only to the set point OPERATION TIPS 7 9 Dripping water may generate on the surface of the indoor unit when cooling in a high relatively humidity relative humidity higher than 80 Adjust the horizontal louver to the maximum air outlet position and select HIGH fan speed Heating mode For cooling and heating models only The air conditioner draws in heat from the outdoor unit and releases it via the i
23. ts an Electric Heater when the outside ambient temperature is below 0 C 32 F we strongly recommend you to keep the machine plugged in order to guarantee it running smoothly Manual operation Manul operation can be used temporarily in case the remote controller is disable or maintenance necessary NOTE The unit must be turned off before operating the manual control button If the unitis operational continue pressing the manual control button until the unit is off Open and lift the front panel up to an angle until it remains fixed with a clicking sound Q One press of the manual control button will lead to the forced AUTO operation If press the button twice within five seconds the unit will operate under forced COOL operation Close the panel firmly to its original position CAUTION e This button is used for testing purposes only You had better not choose it e Torestore the remote controller operation use the remote controller directly Manual control AUTO COOL button Airflow direction control a a louver OPERATING INSTRUCTIONS e Adjust the air flow direction properly otherwise it might cause discomfort or cause uneven room temperatures e Adjust the horizontal louver using the remote controller e Adjust the vertical louver manually To set the vertical air flow Up Down
24. ts until the room temperature is above 12 C 54 F Optimal operation To achieve optimal performance please note the following Adjust the air flow direction correctly so that it is not directed on people Adjust the temperature to achieve the highest comfort level Do not adjust the unit to excessive temperature levels Close doors and windows on COOL or HEAT modes or performance may be reduced Use TIMER ON button on the remote controller to select a time you want to start your air conditioner Do not put any object near air inlet or air outlet as the efficiency of the air conditioner may be reduced and the air conditioner may stop running Clean the air filter periodically otherwise cooling or heating performance may be reduced Do not operate unit with horizontal louvre in closed position CARE AND MAINTENANCE Care and maintenance Cleaning the Grille Case and Remote Controller eTurn the system off before cleaning To clean wipe with a soft dry cloth Do not use bleach or abrasives NOTE Supply power must be disconnectd before qt ml cleaning the indoor unit A CAUTIONS Acloth dampened with cold water may be used on the indoor unit if it is very dirty Then wipe it with a dry cloth Do not use a chemically treated cloth or duster to clean the unit Do not use benzine thinner polishing powder or similar solvents for cleaning These may cause e the plastic surfa
25. turbo air Inverter One One Split Type ROOM AIR CONDITIONER OWNER S MANUAL MODEL TAS 36EHU Please read this manual carefully and thoroughly before operating the unit If you still have any difficulties or problems consult your dealer for help or Turbo Air Conditioning Corp Please keep this manual handy W1 CONTENTS SOCIABLE REMARK Sociable remark SAFETY PRECAUTIONS Warning Caution OPERATING INSTRUCTIONS Parts names Operating temperature Manual operation Airflow direction control How the air conditioner works CARE AND MAINTENANCE Care and maintenance OPERATION TIPS Operation tips TROUBLESHOOTING TIPS Troubleshooting tips A CAUTION Contact an authorised service technician for repair or maintenance of this unit Contact the authinstaller for installation of this unit This appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety Young children should be supervised to ensure that they do not play with the air conditioner If the power cord is to be replaced replacement work shall be performed by authorised personnel only Installation work must be performed in accordance with the national wiring standards by authorised personnel only SOCIABLE REMARK
Download Pdf Manuals
Related Search