Manual - Goldair
Contents
1. 24 hour program is suitable for several days in the week you can copy the program into corresponding days Enter or find the 24 hour program you would like to copy Press the Copy button 10 The word Copy will be shown The day will flash as well Press the timer button 11 to display the day onto which you would like to copy the program The day will flash Press the copy button 10 to complete the operation The word Copy will disappear from the display and the day will stop flashing Repeat this operation to copy the program onto another day Press the Copy button 10 TERMINATE THE WEEK S PROGRAM Press the programming button 8 again to terminate the week s programs The control panel will now show the correct program type UP the temperature corresponding red or green light and the program sequence for the present day The program is now active and running in real time The program information is stored and will be lost when a factory set program is used ALTERING THE USER PROGRAM FOR THE WEEK Display the UP program type if another program is operating See above for how to select the program Press the programming button 8 to open the program Make the required alterations as explained in the programs section of this manual You will need to alter the complete 24 hour program ADJUST THE TEMPERATURE OF A RUNNING PROGRAM FOR THE WEEK The temperature read by the temperature sensor is relati2. GOLDAIR Operating Instructions Panel Heaters GPH310 320 GPH410 420 Models GPH110 GPH210 220 GPH310 320 GPH410 420 General Care and Safety Guide Thank you for choosing a Goldair Panel Heater This Goldair Heater has been designed and manufactured to high standards of engineering and with proper use and care as described in this leaflet will give you years of useful service Please read these instructions carefully 1 2 10 11 12 13 14 15 Use only the voltage specified on the rating label of the appliance Keep all objects at least 1 metre from the front and sides of the appliance Do not place appliance close to radiant heat source Do not operate in areas where petrol paint or other flammable liquids are used or stored Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock fire or damage to the appliance Do not sit on the appliance Do not operate this appliance with a damaged cord plug or after the appliance malfunctions or has been dropped or damaged in any manner Return to a qualified electrical person for examination electrical service or repair This appliance is intended for household use only and not for commercial or industrial use Use this appliance only as described in this manual Any other use is not recommended by the manufacturer and may cause fire electrical shock or injur
3. UU HHH S HHH MUNI 0 aa an 2 FE FE pa 1 6 Ta aa 24 0 aa aa 2 aa FE pa J 6 aa aa 24 FE FE FE 28 FE FE FE FE FE FE sn 24 P6 VETI 0 8 16 24 0 8 16 24 0 pss 3 a oe oe Jl 6 Faren 24 P7 4 MMMM MM FE FE FE FE FE FE FE J 6 ss sa 24 FE FE FE 22 FE FE 28 J 6 aa 28 24 0 FE an 2 FE FE FE J 6 FE an 24 P8 fl I MUI TMH MUI TMH UUI 24 24 0 8 16 24 P9 TE FE FE 28 FE FE FE FE FE FE FE FE FE FE FE FE aa FE FE FE FE FE FE FE aa FE FE FE FE FR FE FE FE FE FE FE 0 8 16 24 0 Ss 16 24 0 8 16 24 0 PERS 8 sn on oe J 6 aes 24 0 men 2 Seas J 6 ee 24 0 pan 8 J 6 m r 24 CE 0 aan 3 ss J 6 mme 24 0 mee _3 eee J 6 a 24 0 PNP 8 en J 6 me 24 CC YH HHH HHH MMH HHH HUUU HHH HHH MUUN 0 men 2 ren 16 me 24 0 rr 3 os 16 men 24 0 aa 3 oo aaa 16 n 24 UP MUUN HUUU HUHU MHUU HUUU HUUU MUHU HUUU HUUU Operating Your Electronic Panel Heater SELECTING A PRE SET PROGRAM See the description of all programs on previous page explaining their content and how they are used The program contents cannot be altered Press the program selection button 5 The display will now show the day the program type which will flash the temperature and the program sequence Use the up and down buttons to select the desired program Press the program selector button 5 again to end the setting The program type will stop flashing The program is now active and will run SELECTING THE USER PROGRAM UP PROGRAM Select program type UP as describe
4. anufacture when used in normal domestic use for a period of two years In non domestic use Goldair limits the voluntary warranty to three months Goldair undertake to repair or replace this product at no charge if found to be defective due to a manufacturing fault during the warranty period This warranty excludes damage caused by misuse neglect shipping accident incorrect installation or work carried out by anyone other than a qualified electrical service technician PLEASE KEEP YOUR RECEIPT AS THIS WILL HELP VERIFY YOUR WARRANTY The benefits given to you by this warranty are in addition to other rights and remedies available to you under law in relation to the goods or services to which this warranty relates In Australia our goods come with guarantees that cannot be excluded under the Australian Consumer Law You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure In New Zealand this warranty is additional to the conditions and guarantees of the Consumers Guarantee Act 1993 Goldair New Zealand Goldair Australia CDB Goldair CDB Goldair Australia Pty PO Box 100 707 PO Box 574 N S M C South Morang Auckland Victoria 3752 Phone 64 0 9 917 4000 Phone 61 0 3 9336 4423 Phone 0800 232 633 Phon
5. d in section above Press the programming the button 8 The day time 00 00 midnight the program sequence and the word Prog are displayed If you would like the program to start on a particular day for example Saturday press the timer button 11 until this day is displayed PROGRAMMING THE ECONOMY PERIODS Use the down button 7 to enter the required economy periods The timer will advance in steps of one hour When the down button 7 is released the next comfort period unit will flash PROGRAMMING THE COMFORT PERIODS Use the up button 6 to enter the required comfort periods The timer will advance in steps of one hour When the up button 6 is released the corresponding comfort period unit in the program sequence will flash PROGRAMMING A 24 HOUR DAY Complete the programming for the whole 24 hour day with economy and comfort periods After programming the full 24 hours the timer will display 00 00 midnight The unit is now ready for programming the next 24 hour day Press the up and down buttons at the same time to start programming over again ECONOMY SYMBOL fr FROST SYMBOL DEGREES CELSIUS DIGITAL DISPLAY COMFORT SYMBOL DEGREES FAHRENHEIT LOCK TIMER HOUR H DAY Mon Wed Fri Sun LOW BATTERY INDICATOR TIMER Tue Thu Sat Opy ORES 0 AMM MMMM MMM DIGITAL ON OFF DISPLAY PROGRAMME Operating Your Electronic Panel Heater COPYING A 24 HOUR PROGRAM If the same
6. e 1300 GOLDAIR 1300 465 324 www goldair co nz www goldair com au Goldair Two Year Warranty IMPORTANT Please complete and retain this warranty card Name Address Place Of Purchase Date of Purchase Name Of Product Model Number Attach a copy of the purchase receipt to this warranty card Due to continual design improvements the product illustrated in this User Manual may differ slightly from the actual product
7. ght 8 program 2 red comfortable temperature indicator 9 LCD screen 3 yellow operating light 10 Copy program 4 green energy saving indicator 11 day hour and minute setting 5 program selector 12 on off switch i 6 up button 13 Comfortable or energy saving temperature selector 7 down button 14 timer OPERATING YOUR HEATER Always choose a safe location for the heater keeping in mind the safety precautions outlined Ensure all packaging has been removed form the unit before use Check that the heater is switched off before plugging into the mains supply Push button number 12 to turn the heater on off The back light will illuminate if the back light does not illuminate within 5 seconds the back light may not be functional The clock symbol and day time display will flash when used for the first time or after a long period of non use Default settings of the unit maintain comfort temperature CC program and the red indicator light 1 will glow The Timer must be set so that it can activate a control program Operating Your Electronic Panel Heater SETTING THE TIME Day Press the Time button 11 The day will flash Use the up and down buttons 6 amp 7 to set the correct day Hour Press the Time button 11 again The hour number will flash Use the up and down buttons 6 amp 7 to set the correct hour Minutes Press the Time button 11 again The minute number will flash Use the up and down buttons 6 am
8. he heater is unplugged and power switches are off 2 Set heater upside down 3 Locate the four holes at each end of the base of the heater 4 Using the provided one way screws secure the foot plates to the base through these holes Please note once these one way screws are in they cannot be removed 5 Set heater upright and plug into a standard 240 volt AC electrical outlet The screw pack to attach the feet to your heater will be taped to either one of the feet for your heater or taped to the plug head WALL MOUNTED 1 Make sure the heater is unplugged and power switches are off 2 Position the panel heater within one metre of a wall socket Do not mount in front of or below the wall socket Ensure there is at least 150mm clearance on all sides of the heater 3 Detach the mounting bracket from the back of the panel heater by unscrewing the two locking screws located on the top of the mounting bracket 4 Position the mounting bracket on the wall and mark the hole positions with a pen or pencil and check they are horizontal with a spirit level Ensure the two bottom mount holes are at least 150mm from the floor and drill holes as required 5 Secure the mounting bracket to the wall with the four mounting screws For masonry walls use the plastic sheaths 6 Slot the back of the heater onto the mounting bracket locating the bottom plugs first and secure with two locking screws 7 Plug heater into a standard 240 volt AC e
9. is tilted forward it is easier to clean behind it It is important to return the heater to its original position after cleaning and to refasten the locking screws Ensure the heater is dry before plugging back into the mains supply IMPORTANT NEVER COVER THIS HEATER CAUTION The heater generates heat during use Proper precautions must be taken to prevent the risk of burns scalds fires or other damage to persons Do not use this heater with a separate programmer separate timer separate remote control system or any other device that switches the heater on automatically WARNING Keep all objects at least 1 metre from the front and sides of the appliance WARNING Take care in positioning your heater using the Timer will mean the heater will come on automatically Fire may result if placed next to combustible material Do not attempt to dismantle the heater There are no user serviceable parts For service or repair contact an authorised electrical service technician PROOF OF PURCHASE To receive warranty retain receipt as proof of purchase SUPPORT AND TECHNICAL ADVICE Goldair New Zealand Goldair Australia Monday Friday 8am 5pm Monday Friday 8am 5pm Phone 64 0 9 917 4000 Phone 61 0 3 9336 4423 Phone 0800 232 633 Phone 1300 465 324 info cdb co nz info cdbgoldair com au CDB 4 GOLDAIR Two Year Warranty Thank you for purchasing this Goldair product Your product is warranted against faults and m
10. lectrical outlet The screw pack to attach the feet to your heater will be taped to either one of the feet for your heater or taped to the plug head 6 15 2cm Wall Mounting Position Wall Mounted Operating Your Manual Panel Heater OVERVIEW OF YOUR GOLDAIR PANEL HEATER Manual Thermostat model Control Unit Air Outlet Air Inlet 1 3 O 1 Temperature Control Knob Cc 2 Working Indicator 3 Switch On Off O max OPERATING YOUR HEATER Always choose a safe location for the heater keeping in mind the safety precautions outlined Ensure all packaging has been removed form the unit before use Check that the heater is switched off before plugging into the mains supply Switch on the On Off switch on the control panel to the On position To turn off the heater switch the On Off switch to the O position THERMOSTAT Turn the thermostat knob clockwise until you reach the maximum temperature on the graduated scale When the desired room temperature is reached slowly turn the knob anti clockwise until the heater turns off you will hear a click The heater will now cycle on and off to maintain the set temperature Operating Your Electronic Panel Heater OVERVIEW OF YOUR GOLDAIR PANEL HEATER Electronic Thermostat model 2 Control Unit Fig 2 Control Panel Fig 3 Mon sadly Fri Sun Tue Thu Sat SAR i g 16 24 TTL MLLER HUUU 1 red indicator li
11. me has elapsed the heater will turn on The Timer setting is one hour units within 24 hours Note You cannot set a specific turn on or turn off time LOCKING THE CONTROL PANEL Press the program selector button 5 to make the program type flash Press the programming button 8 and the setting of the time button 11 at the same time until the lock symbol padlock is displayed All the control functions are now locked and the buttons will no longer operate until unlocked Do the same sequence to unlock the control panel LOW BATTERY INDICATOR When the timer battery is low the LCD screen will flash the low battery symbol to remind you to replace the battery The control panel Electronic models only requires 1x CR2032 battery included Replace battery CR2032 Operating Your Panel Heater CLEANING YOUR HEATER The heater requires regular cleaning to ensure trouble free operation Unplug the heater from the mains supply before cleaning Ensure that the heater has been allowed to cool down completely before cleaning Use a damp not wet cloth to wipe the exterior of the heater to remove dust and dirt Use a vacuum cleaner to remove dust and fluff from the inlet and outlet grills To clean behind the heater when mounted on a wall unfasten the two locking screws located on the top of the mounting bracket press down on the two release catches on the mounting bracket to tilt the heater forward When the heater
12. n with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they are supervised or have been given instruction concerning the use of the appliance by a person responsible for their safety Do not use this appliance in the immediate surrounds of a bath a shower or a swimming pool or other liquids The appliance must not be immersed in any liquids When the appliance has been unpacked check it for transport damage and ensure all parts have been delivered If parts are missing or the appliance has been damaged contact the Goldair Customer Services Team If your appliance does not work or is not working properly contact the place of purchase or the Goldair Customer Services Team Repair work on the appliance by unqualified persons can cause serious risk to the user There are no user serviceable parts installed in the unit Do not place the unit in wardrobes or other enclosed spaces as this may cause fire hazards This unit is not supposed to be used in or around locations where foodstuffs works of art or delicate articles of science etc are stored Indoor use only Children should be supervised to ensure that they do not play with the appliance Ensure heater is on a flat stable heat resistant surface when free standing It is important that you do not cover this heater GPH110 GPH210 220 GPH310 320 GPH410 420 Operating Your Panel Heater FREE STANDING 1 Ensure t
13. p 7 to set the correct Minutes Press the Timer button 11 for a fourth time to end the time setting The control panel will show the last selected program or the UP program program for the week set by the user if you haven t selected another program previously SETTING THE ECONOMY TEMPERATURE This is the maximum temperature the heater will attain during the economy periods of any program Press the Temperature button twice 13 The temperature and economy symbol FJ will flash Use the up and down buttons 6 amp 7 to set the required economy temperature Press the Temperature button 13 again to end the temperature setting The control panel will now show the last selected program NOTE The default set temperature is 17 C The economy temperature must be set at least 4 C lower than the programmed comfort temperature SETTING THE COMFORT TEMPERATURE This is the maximum temperature the heater will attain during the comfort periods of any program Press the Temperature button once 13 The temperature and comfort symbol Os will flash Use the up and down buttons 6 amp 7 to set the required comfort temperature NOTE The default set temperature is 30 C The comfort temperature cannot be set within 4 C of the programmed economy temperature If desired the temperature read out can be changed from Celsius to Fahrenheit by pressing and holding the temperature button 5 seconds In the below picture indicate
14. s when heat will be on note that you must set the time as described above in order for these programmes to work at the expected times 8 16 24 ff FF FF FF FF FF FF FF ff FF FF Economy period f HHU Comfort period Operating Your Electronic Panel Heater DESCRIPTION OF PROGRAMS As per diagram below P1 Heat during the afternoon and evening P2 Heat during the morning afternoon and evening P3 Heat during the morning afternoon and evening P4 Staying at home P5 Lunch and afternoon P6 Office short opening hours P7 Office long opening hours P8 Kids bedroom P9 Bedroom CF Constant frost protection 5 C CE Constant energy saving temperature CC Constant comfort temperature UP Program for the week set by the user W SA SU aa FE FE FE FE FE FE 1 6 aa aa 24 0 aa aa 2 aa FE pa 1 6 Pim i 24 0 aa ae gt aa FE FE 1 6 aa FE 24 P1 HH HUUU MMM S HHH HUNI ARE an oe on od 6 a 24 a a oe J 6 me 24 0 En 8 me J 6 mn 24 P2 M MW MMU 4 MMH MMM MMMM MT 0 co 2 an J 6 me 24 0 mn 8 mee J 6 mere 24 0 n mener J 6 aa 24 P3 WW MMM MH MMMM MMM S MMM MUU FE FE 28 8 FE FE nn J 6 FE FE 24 FE FE 28 8 FE FE 28 J 6 ss i i 24 0 FE ae 2 FE FE FE J 6 FE an 24 P4 MH HHH MMT MH HUUU MMM S HMM MT FE FE FE 28 FE FE FE J 6 aa a 24 FE FE 28 gt aa FE FE 1 6 Pim aa 24 aa an gt FE FE FE 1 6 aa FE 24 PS HM IU sil H HU
15. ve to the position of the heater in the room If the actual temperature is higher than the setting you can compensate for this by adjusting the temperature setting For example if the comfort temperature is set at 24 C but the actual room temperature is 26 C compensate for this by lowering the setting to 22 C Similarly increase the temperature setting if the actual room temperature is lower than the setting Note do not make these adjustments if the temperature is stable Press temperature button 13 The temperature setting and comfort symbol flash Use the up and down arrows to adjust the temperature to your desired setting Press the temperature button 13 again so that the economy symbol is displayed Adjust the economy temperature in the same way Terminate by pressing the temperature button again The heater will revert to the last selected program TEMPERATURE SWITCH Press the button 13 for more than 3 seconds the temperature can be switched between Fahrenheit F and Celsius temperature C The default setting is Celsius Operating Your Electronic Panel Heater TIMER When the machine is on press the Timer button 14 for timing shutdown then press the up button 6 or down button 7 to set timer When this selected time has elapsed the heater will turn off When the heater is off press the Timer button 14 for timing start up then press the up button 6 or down button 7 to set timer When the selected ti
16. y The common cause of overheating is deposits of dust or fluff in the appliance Ensure these deposits are removed regularly by unplugging the appliance and vacuum cleaning the air vents and grills Do not use abrasive cleaning products on this appliance Clean with a damp cloth not wet rinsed in hot soapy water only Always remove plug from the mains supply before cleaning Do not connect the appliance to mains supply until completely assembled and adjusted Switch off and use handle provided when moving Do not operate with cord set coiled up as a heat build up is likely which could be sufficient to become a hazard Do not use an extension cord powerboard or external timer with this unit Do not remove plug from power socket until the appliance has been switched off Do not remove plug from power socket by pulling cord always grip plug TECHNICAL SPECIFICATION Model No Supply Wattage 220 240VAC 50Hz SOOW 1000W 1500W 2000W 16 17 18 19 20 21 22 23 24 20 26 27 28 29 Always unplug appliance when not in use Do not locate the heater directly below any power socket during operation Do not twist kink or wrap the cord around the appliance as this may cause the insulation to weaken and split Always ensure that all cord has been removed from any cord storage area and is unrolled before use This appliance is not intended for use by persons including childre
Download Pdf Manuals
Related Search