USER MANUAL LED PAR 64
Contents
1. USER MANUAL LED PAR 64 1 User Instruction Thank you for purchasing this product For your own safety please read this user manual carefully before you initially start up SAFETY INSTRUCTIONS Every person involved with the installation operation and maintenance of this device has to be qualified follow the instructions of this manual CAUTION Be careful with your operations With a dangerous voltage you can suffer a dangerous electric shock when touching the wires This device has left our premises in absolutely perfect condition In order to maintain this condition and to ensure a safe operation it is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual Important Damages caused by the disregard of this user manual are not subject to warranty The dealer will not accept liability for any resulting defects or problems Keep away from heaters and other heating sources If the device has been exposed to drastic temperature fluctuation e g after transportation do not switch it on immediately The arising condensation water might damage your device Leave the device switched off until it has reached room temperature Make sure that the power cord is never crimped or damaged by sharp edges Check the device and the powercord from time to time If the external flexible cable or cord of this luminaire is damaged it shall be exclusively replaced by the manufacturer or his2. service agent or a similar qualified person in order to avoid a hazard Shields lenses or ultraviolet screens shall be changed if they have become visibly damaged to such an extent that their effectiveness is impaired for example by cracks or deep scratches Never let the power cord come into contact with other cables Handle the power cord and all connections with the mains with particular caution Make sure that the available voltage is not higher than stated in this manual Always disconnect from the mains when the device is not in use or before cleaning it Only handle the power cord by the plug Never pull out the plug by tugging the power cord During the initial start up some smoke or smell may arise This is a normal process and does not necessarily mean that the device is defective DANGER OF BURNING Never touch the device during the operation The housing heats up to the housing temperature TSURFACE Don t switch the device on and off in short intervals as this would reduce the lamp s life HEALTH HAZARD Never look directly into the light source as sensitive persons may suffer an epileptic shock especially meant for epileptics Always disconnect from the mains when the device is not in user or before cleaning it Please note that damages caused by manual modifications on the device or unauthorized operation byunqualified persons are not subject to warranty Keep away children and amateurs from the device There are no ser
3. 55 1 255 1 255 Macro speed RGB strobe Mode 2 3 strobe to change speed dim amp light mode selecting color and strobe to change speed 128 159 mix color adjust mix mix color __ color speed 160 191 3colors jump 3 7 colors strobe 192 223 adjust strobe speed 7colors jump 224 255 NA 7 color sound control audio mode Light mode Light mode 6 255 16 255 16 255 96 127 dim amp light mode 16 255 16 255 16 255 mix color e 160 191 3colors strobe NA NA NA 7 192 223 7colors strobe aia NA NA NA audio mode 3 Technical specification 0 255 96 127 dim amp light mode Adjust speed 1 No output 32 63 32 63 selecting color and Dim mode 16 255 16 255 16 255 Dim mode strobe to change speed k 64 95 64 95 selecting color and 4 NA Input Power 100 240V AC 47 63Hz 120V AC 60Hz 0 32A 230V AC 50Hz 0 16A Power Consumption 23W Max DMX Channel 6 LED Amount R G B 48 3 4 Macro mode figure yet ep gt yp JF ma ames TRT renas 2s me v8 ames o at 192 asea 165 198 27 macet 0 o 1 Ea ES Macro Mode 12 Macro Mode 13 Macro Mode 14 Macro Mode 15 Macro Mode 16 Macro Mode 17 ECE C3 S ECE ECE LS ES E EE EZE Eg c 2
4. viceable parts inside the device Maintenance and service operations are only to be carried out by authorized dealers 2 Operation instructions This system has DMX Online mode and Stand alone Mode Online mode can link other units and be controlled by the DMX controller And Stand alone Mode has the functions of Sound Auto Mixcolor and Strobe and so on Do not receive any DMX signal under Master Slave mode Master setting MODE2 3 4 Slave setting DMX MODE1 If a DMX signal is present under Online mode the DMX LED will blink very fast to indicate While under Master Slave mode Master s LED indicator will light and Slave s one will blink to indicate 2 1 DMX MODE DIP10 OFF DIP1 DIP9 DMX address setting O OFF 1 ON ore ore e7 ore os ora oes orz OPI 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 m dreg DIPS 2 DIP8 2 DIP 7 2 DIP6 2 DIP5 2 DIP4 2 D P3 2 DIP2 2 DIP 172 DIP10 ON DIP9 OFF DIP1 DIP8 any condition 2 3 Mix color Mode DIP10 ON DIP9 ON DIP8 OFF DIP1 DIP7 mix color speed 2 4 R G B Manual Mode DIP10 ON DIP9 ON DIP8 ON DIP7 OFF DIP1 DIP6 see figure below orror R orso ors ore e ron orr sa on ore sm on orr 3 Torr on 66 forr on een orF on 6 ron on 100 on on 100 On on 100 2 5 DMX MODE eT CH3 CH4 CHS che sd Macro Speed 0 0 31 1 255 16 255strobe Set color color setting 2
Download Pdf Manuals
Related Search