Double Eyes Dancer LED
Contents
1. Fig 1 2 3 4 5 6 Backside Fig 2 1 Mountingbracket 5 Movement Continuous Static Sound active 2 Earth connection 6 IEC Powerconnector Fuse 2A 250V 3 Power Link Out 7 Built in microphone 4 LED Continuous Sound active 7 Audio sensitivity 6 Installation Remove all packing materials from the Double Eyes Dancer LED Check that all foam and plastic padding is removed Connect all cables Always disconnect from electric mains power supply before cleaning or servicing Damages caused by non observance are not subject to warranty Set Up and Operation Before plugging the unit in always make sure that the power supply matches the product specification voltage Do not attempt to operate a 120V specification product on 230V power or vice versa When the mounting bracket 1 isn t fitted you will first have to fit the mounting bracket in order to hang it from a ceiling You can also place this device on the floor Connect the device to the main power supply The device is music controlled by its built in microphone The LED 4 switch has 2 modes LEDs Continuous Sound active When the switch is set to the LEDs change continuously When the switch is set to O the device is in music mode and the LEDs react to the music The mirror movement 5 switch has 3 modes Continuous Static Sound active When the switch is set to the right mirror rotates continuously When the switch is set to O the r2. Double Eyes Dancer LED ORDERCODE 43027 Congratulations You have bought a great innovative product from Showtec The Showtec Double Eyes Dancer LED brings excitement to any venue You can rely on Showtec for more excellent lighting products We design and manufacture professional light equipment for the entertainment industry New products are being launched regularly We work hard to keep you our customer satisfied For more information iwantOshowtec info You can get some of the best quality best priced products on the market from Showtec So next time turn to Showtec for more great lighting equipment Always get the best with Showtec 1 Thank you Showtec Showtec Double Eyes Dancer LED Product Guide Warninog SOS IAS C11 O DO rai A SG T E Doing os o PP e In A A I RN IR DR REU OS SOU Sr a A e psp A E E E E E Description Features ana OYES iaa da BOIGKSICI SS STONO ea EE E E E EA E E E A TE ser Up ond Per de a E Malntenaih e PPPPPPP P x ese leia A i E IIS Te TOUDISSAOONNO vacas NO sits RR RD Fileduci SIDS CIC COINS las D ne FOR YOUR OWN SAFETY PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START UP Unpacking Instructions Immediately upon receiving this product carefully unpack the carton and check the contents to ensure that all parts are present and hav
3. is found Once the unit operates properly do not carry out following steps lf the light effect does not operate properly refer servicing to a technician Response Suspect three potential problem areas the power supply or the LEDs 1 Power supply Check that the unit is plugged into an appropriate power supply 2 The LEDs Return the Double Eyes Dancer LED to your Showtec dealer 3 The fuse Replace the fuse See page 8 for replacing the fuse Product Specification Model Showtec Double Eyes Dancer LED Power 240V 50Hz CE Power consumption 50 Watt Light source 98 x 4 W LED s red green blue Compact strong metal housing Automatic mode and Music mode 3 9 mm 290 mm 3 function switch static rotation music E 2 animation wheels Music controlled via built in microphone Fuse 2A 250V Dimensions 375x280x230mm LxWxH l Weight 2 44 kg Minimum distance Minimum distance from flammable surfaces 0 5m Minimum distance to lighted object 0 8m 14 kan Design and product specifications are subject to change without prior notice Ce Website www Showtec info Email service highlite nl O 2009 Showtec
4. must be more than 0 5 meter The maximum ambient temperature fa 45 C must never be exceeded The relative humidity must not exceed 50 B with an ambient temperature of 45 C If this device is operated in any other way than the one described in this manual the product may suffer damages and the warranty becomes void Any other operation may lead to dangers like short circuit burns electric shock crash etc You endanger your own safety and the safety of others Rigging Please follow the European and national guidelines concerning rigging trussing and all other safety Issues Do not attempt the installation yourself Always let the installation be carried out by an authorized dealer Procedure e lithe Double Eyes Dancer LED is lowered from the ceiling or high joists professional trussing systems have to be used e Use a clamp to mount the Double Eyes Dancer LED with the mounting bracket to the trussing system e The Double Eyes Dancer LED must never be fixed swinging freely in the room e The installation must always be secured with a safety attachment e g an appropriate safety net or safety cable e When rigging derigging or servicing the device always make sure that the area below the installation place is blocked and staying in the area is forbidden Improper installation can cause serious damage to people and property Connection with the mains Connect the device to the mains with the power plug Always p
5. ay attention that the right color cable is connected to the right place International EU Cable UK Cable US Cable pin BROWN RED YELLOW COPPER FASE Ta BLUE BLACK SILVER NU YELLOW GREEN GREEN GREEN EARTH Make sure that the device is always connected properly to the earth A Return Procedure A Returned merchandise must be sent prepaid and in the original packing call tags will not be issued Package must be clearly labeled with a Return Authorization Number RMA number Products returned without an RMA number will be retused Highlite will not accept the returned goods or any responsibility Call Highlite 0031 455667723 or mail aftersalesOhighlite nl and request an RMA prior to shipping the fixture Be prepared to provide the model number serial number and a brief description of the cause for the return Be sure to properly pack fixture any shipping damage resulting from inadequate packaging is the customer s responsibility Highlite reserves the right to use its own discretion to repair or replace product s As a suggestion proper UPS packing or double boxing is always a safe method to use Note If you are given an RMA number please include the following information on a piece of paper inside the box 1 Your name 2 Your adaress 3 Your phone number 4 A brief description of the symptoms Claims The client has the obligation to check the delivered goods immediately upon delivery for any short comings and or visible
6. defects or perform this check after our announcement that the goods are at their disposal Damage incurred in shipping is the responsibility of the shipper therefore the damage must be reported to the carrier upon receipt of merchandise It is the customer s responsibility to notify and submit claims with the shipper in the event that a fixture is damaged due to shipping Transportation damage has to be reported to us within one day after receipt of the delivery Any return shipment has to be made post paid at all times Return shioments must be accompanied with a letter defining the reason for return shipment Non prepaid return shioments will be refused unless otherwise agreed in writing Complaints against us must be made known in writing or by fax within 10 working days after receipt of the invoice After this period complaints will not be handled anymore Complaints will only then be considered if the client has so far complied with all parts of the agreement regardless of the agreement of which the obligation is resulting Description of the device Features The Showtec Double Eyes Dancer LED is a light effect with very high output and great effects e Compact strong metal housing e Power consumption 50 Watt e Light source 98 x 4 W LED s red green blue e Automatic mode and Music mode e 3 function switch static rotation music e2 animation wheels e Music controlled via built in microphone e Fuse 2A 250V Overview 1
7. e been received in good condition Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling Save the carton and all packing materials In the event that a fixture must be returned to the factory it is important that the fixture be returned in the original factory box and packing Your shipment includes e Double Eyes Dancer LED e User manual LED Expected Lifespan LEDs gradually decline in brightness over time HEAT is the dominant factor that leads to the acceleration of this decline Packaged in clusters LEDs exhibit higher operating temperatures than in ideal or singular optimum conditions For this reason when all color LEDs are used at their fullest intensity life of the LEDs is significantly reduced It is estimated that a viable lifespan of 40 000 to 50 000 hours will be achieved under normal operational conditions If improving on this lifespan expectancy is of a higher priority place care in providing for lower operational temperatures This may include climatic environmental and the reduction of overall projection intensity WARNING CAUTION Keep this device away from rain and moisture Unplug mains lead before opening the housing FOR YOUR OWN SAFETY PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START UP SAFETY INSTRUCTIONS Every person involved with the installation operation and maintenance of thi
8. ight mirror dish does not rotate When the switch is set to the device is in music mode and the right mirror dish reacts to the music Maintenance The Showtec Double Eyes Dancer LED requires almost no maintenance However you should keep the unit clean Otherwise the fixture s light output will be significantly reduced Disconnect the mains power supply and then wipe the cover with a damp cloth Do not immerse in liquid Wipe lens clean with glass cleaner and a soft cloth Do not use alcohol or solvents Keep connections clean Disconnect electric power and then wipe the connections with a damp cloth Make sure connections are thoroughly dry before linking equipment or supplying electric power The operator has to make sure that safetv relating and machine technical installations are to be inspected by an expert after every four years in the course of an acceptance test The operator has to make sure that safetv relating and machine technical installations are to be inspected by a skilled person once a year The following points have to be considered during the inspection 1 All screws used for installing the device or parts of the device have to be tightly connected and must not be corroded 2 There may not be any deformations on housings fixations and installation spots 3 Mechanically moving parts like axles eyes and others may not show any traces of wearing 4 The electric power supply cables must not show any damages or materia
9. l fatigue Replacing a Fuse Power surges short circuit or inappropriate electrical power supply may cause a fuse to burn out If the fuse burns out the product will not function whatsoever If this happens follow the directions below to do SO 1 Unplug the unit from electric power source 2 Insert a screwariver into the slot in the fuse cover Gentiv pry up the fuse cover The fuse will come out 3 Remove the used fuse If brown or unclear if is burned out 4 Insert the replacement fuse into the holder where the old fuse was Reinsert the fuse cover Be sure to use a fuse of the same type and specification See the product specification label for details Troubleshooting This troubleshooting guide is meant to help solve simple problems If a problem occurs carry out the steps below in sequence until a solution is found Once the unit operates properly do not carry out following steps 1 If the device does not operate properly unplug the device 2 Check the power from the wall the fuse all cables etc 3 If all of the above appears to be O K plug the unit in again 4 f you are unable to determine the cause of the problem do not open the Double Eyes Dancer LED as this may damage the unit and the warranty will become void 5 Return the device to your Showtec dealer No Light This troubleshooting guide is meant to help solve simple problems lf a problem occurs carry out the steps below in sequence until a solution
10. ondensation water might damage your device Leave the device switched off until it has reached room temperature If your Showtec device fails to work properly discontinue use immediately Pack the unit securely preferably in the original packing material and return if fo your Showtec dealer for service For adult use only Light effect must be installed out of the reach of children Never leave the unit running unattended For replacement use fuses of same type and rating only The user is responsible for correct positioning and operating of the Double Eyes Dancer LED The manufacturer will not accept liability for damages caused by the misuse or incorrect installation of this device This device falls under protection class Therefore it is essential to connect the yellow green conductor to earth During the initial start up some smoke or smell may arise This is a normal process and does not necessarily mean that the device is defective Repairs servicing and electric connection must be carried out by a qualified technician WARRANTY Till one year after date of purchase CAUTION EYEDAMAGES AN Avoid looking directly into the light source meant especially for epileptics OPERATING DETERMINATIONS This device is not designed for permanent operation Consistent operation breaks will ensure that the device will serve you for a long time without defects The minimum distance between light output and the illuminated surface
11. s device have to be qualified follow the instructions of this manual CAUTION Be careful with your operations With a dangerous voltage you can suffer a dangerous electric shock when touching the wires Before your initial start up please make sure that there is no damage caused by transportation Should there be any consult your dealer and do not use the device To maintain perfect condition and to ensure a safe operation it is absolutely necessary for the user to follow the safety instructions and warning notes written in this manual Please consider that damages caused by manual modifications to the device are not subject to warranty This device contains no user serviceable parts Refer servicing to qualified technicians only 2 IMPORTANT The manufacturer will not accept liability for any resulting damages caused by the non observance of this manual or any unauthorized modification to the device Never let the power cord come into contact with other cables Handle the power cord and all connections with the mains with particular caution Never remove warning or informative labels from the unit Never use anything to cover the ground contact Never leave any cables lying around Do not insert objects into air vents Do not connect this device to a dimmerpack Do not open the device and do not modify the device Never use the device during thunderstorms unplug the device immediately Never look directly into
12. the light source Do not switch the device on and off in short intervals as this would reduce the system s life Do not shake the device Avoid brute force when installing or operating the device Only use device indoor avoid contact with water or other liquids Only operate the fixture after having checked that the housing is firmly closed and all screws are tightiv fastened Avoid tlames and do not put close to flammable liquids or gases Always allow free air space of at least 50 cm around the unit for ventilation Always disconnect power from the mains when device is not used or before cleaning Only handle the power cord by the plug Never pull out the plug by tugging the power cord Make sure that the device is not exposed to extreme heat moisture or dust Make sure that the available voltage is not higher than stated on the rear panel Make sure that the power cord is never crimped or damaged Check the device and the power cord from time to time If the external cable is damaged if has to be replaced by a qualified technician If the lens is obviously damaged if has to be replaced So that its functions are not impaired due to cracks or deep scratches If device is dropped or struck disconnect mains power supply immediately Have a qualified engineer inspect for safety before operating If the device has been exposed to drastic temperature fluctuation e g after transportation do not switch if on immediately The arising c
Download Pdf Manuals
Related Search