Samsung SmartCam
Contents
1. 2 The list of manually recorded videos saved in the SmartCam app is displayed test 2015 04 06 15 11 43 test 2015 04 06 15 11 32 tes 2015 04 06 15 11 03 test 2015 04 06 15 10 02 tes ii 2015 04 06 15 05 56 3 Tap the video you want to play and then the video that has been selected will be played e You can play or pause the video e Drag the time bar and play the video at the desired time 4 You can save recorded videos in the SmartCam folder of the mobile terminal by tapping the lt e gt icon SD Save o Continuous recording automatically saves video to SD memory every five minutes You can manually record the live screen using the Save to SD button If you switch to another screen without turning it off video will be saved for additional 30 seconds before stopping Event recording saves motion or audio for thirty seconds and if motion or audio is detected again in the meantime the amount of saving time is extended E Ifa manual event recording occurs during continuous recording the manual event recording video may be split into 5 minute segments SD Playback 1 Tap the lt cy gt icon E m This model supports SD cards test D w Playback Setup 2 Searchable dates are displayed W on the calendar Tap the left right lt J Bj gt Se button to select between year Wed Thu month in the top of the calendar to move to the previous or next month2. The voice can be heard from the speaker on the camera After finishing talking press down the icon for two seconds so that the audio information will be transmitted through the network 4 Even if you did not activate the two way audio function you can receive the audio sound of the video In addition the microphone setting should be at least 1 or higher if you want to use the two way audio function E When there are multiple users logged on to the camera first person who tap the Talk icon will have the control While the bidirectional audio is on you need to tap the bidirectional audio icon again to cancel the function E n relay mode there is no audio For more details refer to Relay Mode Motion zone Se a 1 Tap the motion zone icon Connect to the motion zone mode After touching the video drag it to set the area You can set a max of three motion zones 4 lf you want to run the motion zone in the area set tap lt OK gt Motion is detected only in the set area Motion zone function only operates if motion detection is activated In lt Setup gt lt Event gt set motion detection 5 To delete the set area press lt Clear gt and lt OK gt If you want to exit the motion zone setting mode tap lt Cancel gt m f you delete a motion zone with the motion detection enabled any motion in the full area will be monitored and detected To control digital zooming You can al
3. 3 Select the desired date of search 4 Select an event type that you want to search You can select a saved video type in BIX the playing list 5 On the screen a circular shaped ss timeline 24 hours will be 2015 0408 displayed The time zone with the search data is classified by colors 6 Check the timeline and drag it to the desired playing time to set the video playing start time or enter the time on your Own e Previous Next video Move to the previous next video to the selected video 7 Tap the lt gt button Play the video data e O You can play or pause the video e q Drag the time bar and play the video at the desired time iY The camera supports a high definition recording profile A recorded video may not be played seamlessly depending on the wireless network speed mobile terminal performance and or your Internet service provider s policy It is not possible for the same recorded video to be played by 2 or more users simultaneously The function of playing a recorded video also does not work in an environment in which the live screen is connected to a relay mode A 8 Auto Login Setup Move to the lt Setup gt item 2 If you check lt Auto Login gt and run the app when it is terminated you will be automatically logged in 9 Alarm setting 1 Move to the lt Setup gt item 2 Set the alarm for an event e Sounds Vibrate N
4. date time on the live video e Save camera password You will be connected to your camera without having to enter the password e Change camera password Change the current camera password e Image encrypting This encrypts the image transmitted This function is only supported for SNH P6410BN model e status LED You can turn on or off the LED on your camera e Firmware Version You can check the current version and the latest distributed version and even make updates If there is the latest version of firmware when you make a live video connection a pop up will appear so that you can update your camera s firmware e Camera default Initializes all settings of the camera except for network settings 3 Tap lt Apply gt The supported functions may be different depending on the model E When you initialize your camera data stored in the mobile terminal voice phone recording Google account settings will not be deleted Network setting 1 Tap the lt Network gt sii 2 Configure the wireless network ui e WIFI Display the list of WiFi From the list below Please select the WiFi i se a network you wish to use Apple N k 8dfd router that you can use PASEO design iY mf the Wi Fi receiving sensitivity is PERE poor receiving a video may not ee work properly Move the location of the camera to adjust receiving sensitivity NETGEAR27 Other WiFi Networks Time setting 1 Tap lt Time g
5. IRA Serial number Prev Next Wy 92 Ba 45 959 96 7a 89 90 qwertyuioop aos id fig akao ij k t z xevbnm a 123 7 4 English US gt Sym ke Done 11 Enter lt Camera Name gt and lt Camera password gt and then click lt OK gt Create camera name and camera password 4 E Click lt Show Password gt to check PEereenen your password Camera password Use 1 8 numbers and or letters Confirm password 12 The camera registration is completed Select lt Yes gt for a camera setting Select lt No gt to view a live screen Camera registered successfully The camera settings can now be l4 Cameras may not be registered Continue wth he camer A setup depending on the settings of the i mobile device In this case contact the service center Yes 3 Camera List Camera Move 1 Move to the lt Camera gt item From the listed active cameras tap the desired camera s FJ on the right test l4 E You cannot monitor an inactive MC tostz camera m Fora Wi Fi Direct camera you can set the wireless network by selecting an inactive camera 2 Live Event Playback and Setup icons will be displayed i The supported functions may be different depending on the model test OR amp E Live Event Playback Setup Delete Camera 1 To delete an added camera tap and hold the desired one from the camera list and tap lt Delete gt Are you sure you want
6. SmartCam Android Search keywords for the application Samsung SmartCam Smartcam Techwin 1 Requirements for mobile devices Hardware Operating System Requirements OS Android 4 4 5 0 CPU 1GHZz or higher 128MB or more recommended el RAM 50MB Minimum Network Must support Wi Fi or 3G LTE mobile communication Video Codec H 264 Recommended mobile devices Galaxy S4 S5 Note 4 Recommended Tablet PC Galaxy Note 10 1 ci f you use 3G or 4G LTE data communication excessive amount of fees can be billed and may cause data delays or loss Wi Fi is recommended E Some functions may not work properly depending on the manufacturer of the mobile terminal 2 Subscription 1 Run the downloaded application Smart 2 Tap lt Create new account gt Smart Enter User ID Enter Password Create new account O 3 Tap lt Start gt Welcome to Smart Setup using 3 simple steps below Step 1 Sign up for an account Step 2 Register your camera Step 3 Configure your camera 4 Enter requested information Create new account B Create user ID between 8 14 characters using Email address is used to search for AIM account ID or password Password Create password between 10 14 characters using 5 Read the terms and cond itions both letters and numbers Example samsung135 NEIG Enter your name e Mail Example xxxx samsu
7. camera that has the last Gks four digits of the serial number on the back of the product il i OELE i L DIRECT CAM 037N 10 Select a WiFi router connected to Ea your camera Select the WiFi network you want the camera to connect to O After entering the password connect to a WiFi eau ial ee router design E Without the password you fiata will not be connected to a WiFi age router NETGEAR27 e Other WiFi Networks Enter the SSID name security type and password If selected it shows guide on SSID and networking procedures e Network password If you select a WiFi router with the password then the pop up Network password window will prompt you to enter nter VVIFI network passwort the password A 1234567890 qwertyuioop as dfiigh j k t zixicivibinim a 123 n 4 English US gt us Sra a 5 3 al Done 11 The LED of the camera will Registration turn into green if a camera is connected to Wi Fi iY Camera s LED will blink in blue while searching for a WiFi router If a connection is made to the WiFi router the LED will be blue Wait until the camera LED changes from consistently After a short while blue to green This should take about 3 minutes while the camera is connecting to the server the LED will turn green w m 12 Enter lt Camera Name gt and lt Camera password gt and then click lt OK gt Create camera name and camera password iY Clic
8. e model does not support the SD card the video is saved to Google Drive 3 Tap lt Apply gt o The supported functions may be different depending on the model Requesting Google account authentication You can use Picasa Google Drive by requesting authentication Sign in with your Google account 2 Tap lt Allow gt then an access code will be created 3 Tao lt Send authentication code gt Picasa Google Drive settings are complete Authentication request Login to your Google account to receive the authentication code Sign in with your Google Account Next Authentication code Authentication request Login to your Google account to receive the authentication code Google xxxx gmail com v Please copy this code switch to your application and paste it there 4 RF6he608emicKYoh Authentication code 4 RF6he608emlcKYoh Send authentication code SD card setting o m Itis applicable to a model that supports SD cards You need to purchase an SD card if you want to use it Note that inserting an SD card which has been used for other purposes into the camera may delete the data Before removing the SD card deactivate the Use SD card setting If not the SD card can get damaged 1 Tap lt SD Card gt General Network Time Event SD Card 2 Set the SD card item SD Card Use SD card e Use SD card When you set motion audio the video willbe Kour au
9. eo may not work properly depending on the wireless network speed the device s performance or the policies of the internet service provider It is recommended to set up a profile that enables seamless video Manage saved video clips You can download files saved inthe EZZ SmartCam app to a mobile terminal or delete them ne 04 08 15 24 45 ce 04 06 16 10 54 in 04 06 15 16 47 a 04 06 15 16 32 Fj 2015 04 06 15 57 01 a Potro 43 2015 04 06 15 11 32 test 2015 04 06 15 11 03 test 2015 04 06 15 10 02 Ka 04 06 15 05 56 Checking the S W info 1 Move to the lt About gt item 2 You can check the information of the currently installed software Version Created Date Copyright Help guides This software uses FFmpeg under LGPL v2 1 1 Move to the lt About gt item HCl 2 Tap the lt Help Guide gt menu to see help Z m Help is provided in 14 languages
10. k lt Show Password gt to check ifeemechens your password Camera password Use 1 8 numbers and or letters Confirm password 13 The camera registration is completed Select lt Yes gt for a camera setting Select lt No gt to view a live screen Camera registered successfully The camera settings can now be Y Ifyou failed to register wirelessly Contin wth the carer please try again over a wireline ia Cameras may not be registered depending on the settings of the mobile device Yes In this case contact the service center Cable connection 7 Tap lt Optional Setup gt Wireless Setup If a model is not available for the network cable a wireless connection is only available Optional Setup 8 Tap lt Next gt after connecting Registration a camera according to the 1 instructions displayed on the screen Tap lt Next gt when the camera LED changes to green For SNH 1010N the power LED turns to white 9 Select the camera found and tap lt Next gt iY m When your smartphone is connected to the same Wi Fi network as the camera it will automatically search for the camera SMART6411ADT003 Cameras already registered are not searched Serial number Prev Next 10 If the camera is not detected Registration please enter the camera serial eee aa the back of the camera number manually and enter it below E For camera s serial number location refer to
11. ng com I agree to the Samsung Techwin s terms and conditions Terms of Services Privacy Policy 6 Tap lt Next gt when the menu on the completion of anew member Account created Tap lt Next gt to setup the camera O l4 Tap lt Add Camera gt after logging in if you are already a member a Add Camera Wi Fi Direct connection iY fa model is not available for the network cable a wireless connection is only available Press the button Tap here to add registered camera when you register a camera being used in another account in order to register it immediately without setting it 7 Tap lt Wireless Setup gt 8 Tap lt Next gt after connecting a camera according to the instructions displayed on the screen Wireless Setup If a model is not available for the network cable a wireless connection is only available Optional Setup Registration Plug in the power adapter and connect it to the camera Camera can take up to 2 minutes to boot up When the camera LED flashes in WiFi red press the WiFi button on the back of the camera for 5 seconds mP an 3 The status LED on the camera will change to light yellow green Tap lt Next gt 9 After selecting a camera to Registration connect tap lt Next gt The camera s will be listed below Select the camera you wish to add and 55 tap lt Next gt If a camera doesn t connect please 2 4 m Select a
12. on sounds When an event occurs an alarm will be displayed as it was set e Alert Message Pop up When an event occurs a notification pop up will appear e Screen off mode Pop up When an event occurs with the screen turned off a notification pop up will appear Setup Auto Login A Setting Alert A Sounds nl Vibrate E Non sounds lv Alert Message Pop up A Screen off mode Pop up Video Profile Auto setup the camera s video to low medium or high mode The video may not work properly depending on the wireless network speed the device s performance or the policies of the internet service provider It is recommended to set up a profile that enables seamless video Low Resolution Medium Resolution High Resolution Manage saved video clips Auto Login Setting Alert A Sounds Vibrate Non sounds Alert Message Pop up Screen off mode Pop up Video Profile Auto setup the camera s video to low medium or high mode The video may not work properly depending on the wireless network speed the device s performance or the policies of the internet service provider It is recommended to set up a profile that enables seamless video Low Resolution Medium Resolution High Resolution Manage saved video clips 10 Other Settings Move to the lt Setup gt item Select a video profile Auto setup the camera s video to low medium or high mode The vid
13. ra Name Camera name is used to easily identify the camera when you have more than one WDR e Speaker Mic Adjust the volume for the camera s built in Bri mic or speaker Change camera password Audio REC Night Vision Display date Image encrypting iY m f you set the mic to zero there will be no live sound and no audio event and also there is no recording in the SD card status LED Cancel Audio List 01 Add personalized audio clip e Audio REC The voice can be recorded or deleted by users e Night Vision Set the IR lighting Check lt Night Vision gt to set 03 Add personalized audio T the camera to switch to the 04 Add personalized audio T e night vision mode automatically 02 Add personalized audio clip 05 Add personalized audio clip m Inthe case of SNH 1010N youcan KASE EZ check lt Night Vision gt for a camera ET to automatically operate the IR lighting for two minutes depending on the brightness of the neighboring areas iiganaesindhailiacesiaaeiaall c 10 Add personalized audio clip S 08 Add personalized audio clip e WODR You can compensate for the backlight by making a dark area brighter and a bright area darker m SNH P6410BN SNH V6414BN supported Current Password e LDC Sets whether to use the TEE image correction distortion Sk Tnm paa Confirm password This function is only supported for SNH V6414BN model e Display date Displays the
14. ras and mobile devices is activated Refer to the bidirectional audio function Select a profile Melody Brightness control Shows the profile of the currently connected video Tap if you want to switch to a different profile m Fora video you can select low mid high model profiles For more information about the resolution of each profile frame rate and recommended bandwidth please refer to the user manual m High definition video may not be available depending on the wireless network speed mobile terminal performance and or your Internet service provider s policy In this case the video will be connected to relay mode and be displayed for 7 minutes For more information please refer to Relay Mode The selected melody will be heard through the camera speaker Adjusts the screen brightness No Description Flip contro Flips the video image It detects motion within the area set by the user 9 Motion zone Refer to the motion zone functions A user can record audio and play the recorded audio Audio playing through the camera speaker m You can record a max of 10 audio files ee If you select lt Night Vision gt in general settings IR IR Lighting lighting will operate for two minutes K The supported functions may be different depending on the model Two way Audio 1 Tap on the Two way Audio icon The Mic icon will appear Talk while pressing down the mic icon
15. so Zoom in by pinch open using two fingers on the screen To zoom out pinch close on the screen Touch and hold to drag the screen in any direction to reveal the hidden part of the image if enlarged bigger than the screen Z E Current digital zooming level is noted next to the digital zoom box and digital zooming supports zooming up to x4 Relay mode If the network condition is not good and a connection is unstable then you can use the relay mode to view video for seven minutes When connected to relay mode mark will be displayed on the video screen In addition sound and high definition image will not be provided to ensure the stability of the connection c m f the router UPnP setting is not set then a relay mode connection can be made Depending on the model of router used a different setting method is used Refer to the user manual E lf a camera is connected to the multiple router or the wired wireless network environments for camera and mobile device are unstable a relay mode connection can be made If you have trouble connection to the camera visit http www samsungsmartcam com go to support page and refer to Troubleshooting on it 5 Camera Setup Tap the lt Setup gt icon to configure a camera to be monitored General Network Time Event SIDOT General setting 1 Tap lt General gt sii Camera Name 2 Configure the basic camera settings Speaker Mic e Came
16. t ii Time 2 Set the camera s clock Time zone e Time zone Select your region ff cum Geenwich Mean Time e Daylight Saving Time Check Daylight Saving Time this option if you live in a country or region where DST Daylight Saving Time is applied Event setting 1 Tap the lt Event gt Evert Event alert 2 Set your event items Motion Detection e Event alert Detection of motion audio or saving of video in the Picasa or Google drive is ieldbaeaids notified to the user Sensitivity Sensitivity e Motion Audio Detection eE ue Specify whether to trigger the alarm or not and specify the sensitivity The higher the sensitivity is the EES subtler motion audio events will E eia authentication process is completed be detected e Google account setup You can upload pictures on Picasa through the Google account If you configure a Google account an alert will iY m fyou wish to send an event alarm RRSRaaaaaaaaias to the Picasa Google drive you enrol must register the Google account first Google password e Send an alert Sends an alert SE via email when motion audio is Need to create a detected Google account e Manage alert recipients Adds or deletes a recipient who will receive an alert message e Picasa Sends event images to the user s Picasa account e Google Drive A 30 second video clip is uploaded automatically to the user s Google Drive account cH m f th
17. tection Icon 04 02 15 06 56 15 07 04 Audio E Detection icon p ee y po 14 51 37 14 51 54 14 51 52 e Picasa icon Tap on the Picasa icon to see picture 14 51 42 4 lf the model does not support the SD card you can view the video by tapping the Google Drive icon f you select the Google Drive icon Picasa icon the linked web page is displayed You can watch the video only when the Google Drive account is the same with the one used in the camera If you download a file you can play the video on a video player But if the video player has no codec installed to support the video the video won t be played smoothly so please install the codec that supports H 264 and G 711 first Deleting All Events 1 If you tap the Menu button of the mobile device the lt Delete All gt TERESE dialog pops up 04 06 15 14 30 2 Tap on the lt Delete All gt to clear ZAME AET the all event 0330 PNR Z When deleting all SD card events usos O will not be deleted 14 51 52 B 14 51 42 Delete All Deleting Each Event 1 Tap and hold the desired event to be deleted 15 14 25 15 14 32 04 06 15 14 30 04 02 15 06 56 15 07 04 03 30 15 07 01 14 51 37 14 51 54 e leletek 14 51 52 14 51 42 2 Tap on lt Yes gt to delete the event Are you sure you want to delete the event EES s 7 Playback Phone Recording 1 Tap the lt E gt icon
18. to remove this camera 4 Live Video 1 Tap the desired camera s IE or tap the lt Live gt icon iY m f there is the latest version of T firmware when you make a live video connection a pop up will appear so that you can update your camera s firmware test OR r BX Live Event Playback Setup Ma test2 2 Enter the lt Camera password gt for the camera selected This is the same camera password you NR created at the time you registered the camera Check the lt Save gt option to save the camera password cae Leen Within 20 seconds it will start streaming AHi 2a HBa mo Bn on net BH 9 O Enter the camera password Save qwertyuioop ais d fig wka ij k t zxevbnm a 123 4 English US gt Sym xt adi qd Z According to the network service provider s policy or the network connection status it may take a while to load Live Video _ a 2 3 4 5 No malas 6 7 8 9 0 Description Phone recording The user can save the video in lt Manage saved video clips gt in Settings SD Save 3 Capture A user can manually save the video in the SD card m f the Overwrite SD Card option is disabled it is impossible to record if the remaining free space is less than 10 of the total storage You can capture and save a still image from the video Two way Audio The microphone for two way audio between came
19. tomatically saved in the SD Brent recording SET If the motion detection or audio detection option card in event setting is activated it will automatically 7 save the video when an event occurs e Continuous Recording Video isisi Deactivate the SD card If not the SD card can be is saved regardless of the event igi that occurs SD card Overwrite e SD card Overwrite If the SD Status card capacity is insufficient Size Free Total 5 81 7 39 GB then it will automatically start overwriting the oldest data e Status Check the remaining capacity of the SD card e Format Delete all the data in the SD card 3 Tap lt Apply gt 6 Event List 1 Tap the lt Event gt icon and the Google Drive and the Picasa event link are displayed Z Events are listed only when you have registered the Google account and set the Google Drive Picasa test OR amp B x Live Event Playback Setup You will get a notification prompt when event is detected by the camera tS E m While uploading files in Google Drive or Picasa no event is detected Motion Detection E When an event is detected an E alarm is received and when image or video uploading is finished then one more alarm is received 2 Events detected are saved on the server and are displayed in the event list in order of their occurrence o SD card event icon fe Tap the SD card event icon to play video Motion De
Download Pdf Manuals
Related Search