User manual FK-Series
Contents
1. Modulator RF OUT SIRIA NR 2 Unpacking Unpack the receiver and check to make sure that all of the following items are included in the packaging Y 1 x Remote Control Unit RCU 500 Y 1xUser s Guide Y 1 x Digital Satellite Receiver 3 General Operation of STB Throughout this manual you will notice that the everyday operation of your STB is based on a series of user friendly on screen display and menus These menus will help you get the most from your STB guiding you through installation channel organizing viewing and many other functions All functions can be carried out using the buttons on the RCU and some of the functions can also be carried out using the buttons on the front panel Please be aware that new software may change the functionality of the receiver Should you experience any difficulties with the operation of your unit please consult the relevant section of this manual including the Problem Shooting or alternatively call your dealer or a customer service adviser NOTE Saa Please be aware that new software may change the functionality of the receiver The photo rd and the function explanation involved in this specification is for reference only If there is any mistake please refer to the entity L 4 FERGUSON 6 4 Remote Control Unit RCU 500 Due to standardization fact most of Ferguson units is using the same remote control unit RCU 500 That is why NOT all keys are being used by this ST2. As in Multi Search you can search several Transponders by selecting them before pressing red button AW 2 User Preference 4 gt FERGUSON GMT Offset Usually you get the information real time from the satellite automatically but sometimes they transmit wrong information In that case you can adjust the real time using this function Summer Time Press keys to select Yes or No Menu Transparency You can adjust the transparency level by using keys From 65 to 100 InfoBar Time Out When you want to fix up the channel information box disappearing function you can set time period at the option InfoBar Type Select the banner type among small middle and large RecBar Auto Hide When you want to fix up the recording information box disappearing function you can set time period at the option AC3 Auto Play This feature will automatically play surround sound when it s available 18 2 1 Parental Control The STB provides an active parental lock function allowing you to block specific menu settings by means of a four digit security code Accessing the Parental Control menu is controlled by a current password The default value is 0000 If necessary you can change it later Highlight the item you want to operate and press keys to select ON or OFF A password is required for the menu which its corresponding item has been set to ON Parental Control Press OK To change password 1 To enter the new password in the i
3. is faulty Change the LNB No picture appears on the TV screen The system is connected by SCART leads and TV is not in AV EXT mode Check the UHF channel fixed in your system and tune the UHF channel properly There is interference on your digital satellite channel The system is connected using RF leads and the output channel of the receiver interferes with an existing terrestrial channel or Video signal Change the receiver output channel to a more suitable channel or connect the system using SCART leads The RCU is not working Battery exhausted Change the battery RCU is incorrectly aimed Aim the RCU at the unit or check that nothing blocks the front panel In worry about customer s satisfaction in case of any problems we ask you always before dispatch device to check on our internet side www ferguson digital eu if the newer version of software is Due to conditions of guarantee the actualization of software does not rank to service repairs 4 gt FERGUS 26 GLOSSARY CA Conditional Access Encryption system used to secure content and grant access only to subscribers CAM conditional access module is an electronic device usually incorporating a slot for a smart card which equips a set top box with the appropriate hardware facility to view conditional access content that has been encrypted using a conditional access system CI Common Interface
4. is the slot on a digital television receiver into which a conditional access module CAM may be inserted for satellite television A receiver with a common interface allows the user to access encrypted television broadcasts as opposed to free to air FTA channels DVB S is the original Digital Video Broadcasting forward error coding and modulation standard for satellite television DVB S is used in both MCPC and SCPC modes for broadcast network feeds as well as for direct broadcast satellite services The transport stream delivered by DVB S is mandated as MPEG 2 EPG Electronic Programme Guide also known as an Interactive Programme Guide or IPG provides an on screen guide to channel listings programme information or pay per view events FTA Free to air broadcasts that are sent unencrypted and may be received via any suitable receiver LNB low noise block converter is used in communications satellite usually broadcast satellite reception The LNB is usually fixed on the satellite dish MCPC multiple channels per carrier several subcarriers are combined into a single bitstream before being modulated onto a carrier transmitted from a single location to one or more remote sites Monoblock LNB is a unit consisting of two LNBs and is designed to receive satellites spaced close together 27 Pay TV Pay television or Premium Television refers to subscription based television services provided digital c
5. mark C This mark tells you that the receiver is following the provisions of Council Directive 89 336 EEC on the approximation of the laws of the Member States relating to the electromagnetic compatibility and the provisions of Council Directive 73 23 EEC and 93 68 EEC on the approximation of the laws of the Member States relating to low voltage and electrical safety The double insulation symbol E This symbol tells you that the receiver is electrically safe within the normal use of the receiver as stated in the safety chapter Environment protection first v Your appliance contains valuable materials which can be recovered or recycled y Leave it at a local civic waste collection point 5 lt p FERGUS GENERAL INFORMATION This digital satellite receiver is a highly cost effective digital satellite receiver integrated It Q provides big channels storage with fast searching The receiver is definitely one of the best choices to deliver your digital life 1 Main Features USB PVR function recording on USB memory Digital Audio Stream through optical S PDIF Component YPbPr output Advanced Electronic Program Guide EPG Supports Teletext and Subtitles Multi Language OSD Menu Quick search function Separate TV Radio List amp Favourite Group List Program search in automatic advanced and manual way DiSEqC 1 0 1 1 1 2 Unicable and USALS control compatible Program List Download through USB Smart Card Interface for pay TV
6. meridian and the equator Therefore when aligning the motor for the first time and then again later on with all the other satellite positions alignment with the actual satellite position has to be achieved with the motor commands move east west Because of these difficulties manufacturers of these motors make available helpful software on their web sites that enable you to easily calculate the true position of a satellite LNB 4 FERGUSON 14 FIRST STEPS 1 Insert the plugs of the receiver s and the auxiliary equipments in the power socket and switch them on 2 Select the AV channel on the TV set 3 The receiver is delivered with pre programmed TV channels and can be used immediately To see if there are any new channels then activate the channel search Caution Check the connections of all equipment and the antenna are in working order before connecting the receiver to the power source MENU INFORMATION The user interface has various ways to navigate through the menus and functions Some of the keys on the remote control unit give direct access to functions The most important keys are identified as EPG colored keys MENU and OK Other keys are multi functional which means that their function changes dependent of the mode that you are in Unless otherwise specified this note explains the way you can navigate through the pages of the user menu 1 Use the up and down keys to move the cursor up or down from on
7. ADING Ferguson has used all the available means to deliver to its users software updates guaranteeing the best possible parameters of the satellite television receivers Ferguson reserves the right to make corrections changes or modifications of the software used in the receiver on any basis whatsoever and without prior notice The current version of the software is available on the following website http www ferguson digital eu USER MANUAL Telstar has used all the available means to ensure the latest information regarding its products Ferguson does not give a warranty regarding the contents of this User Manual and waives any implied warranties regarding market value or fitness for specific purposes The information contained herein provide guidelines allowing the operation and maintenance of the receiver Ferguson reserves the right to make changes corrections or to translate the User Manual without giving prior notice of such changes Therefore it is recommended that users visit our website regularly to receive the latest information 4 FERGUSON 4 SYMBOLS USED ON THE RECEIVER DVa3 The Digital Video Broadcasting logo This logo tells you that this receiver is compliant with the DVB standards Digital Video Broadcasting mm The caution risk of electrical shock do not open symbol This symbol tells you that you are not allowed to open the receiver Only authorized service technicians are allowed to open the box The CE
8. B model wr xK POWER Turns the Receiver ON OFF MUTE amp Selects the sound ON OFF FORMAT Selects various video aspect ratio SAT amp Changes the satellite on the channel list TV STB Change SCART loop functionality TV RADIO Switches between TV and Radio modes BACK Returns to the previously viewed channel EPG Electronic Program Guide displays EPG MENU Displays the menu on the screen OK Shows the channel list or selects an item on the menu INFO Displays the program information box on the screen VOL VOL Adjusts the sound volume increase decrease EXIT Returns to the previous menu and the screen CH CH Turns to the next or previous channel TEXT Shows the TELETEXT on the screen if the TV can be available AUDIO Selects the audio track for the current channel if applicable SUB T Selects the subtitle language for the current channel if applicable FIND F Quick Find channel function lt FERGUSON EDIT CU 500 You can edit the current channel information OPT Multifeed channel function USB PVR Shows USB menu only if USB storage was connected FAV Displays the favorite channel list REW PLAY PAUSE FF STOP REC Keys for functions of recording playing and time shift PG DOWN PG UP To move faster on any list 7 lt P FERGUSON 5 Front Panel O goseooe O POWER Turns the receiver ON OFF CH AV Changes the channels on the screen
9. Delete Channel 4 3 Move Channel an 4zail ock Channel gt e lu eia oW add Ddu NND Fyn iN Y OA RC antes a E DYT OY i CE 4 5 Adding Channel To Favor caia pts dwylo lc 4 6 Save Restore 0ccccccnncncnncnnnannnnans 5 System Setting 5 1 USB Upgrade 5 2 SmartCard Info 5 3 System Information 5 4 Factory Default 6 Timer Setting 7 General Viewing Function 7 1 Recording Hn Ll USB PVR Ke A a 723 TIME SAN AS a NN 7 4 CI 7 5 SAT List a 7 6 Channel list nue a code ein duc dave Gases ccd ele cant vba ED nA FR WM o estes teases toa BARE eee na EN y Quick Find eee A A teeta taste apa a Ri tases 7 8 Channel Edit 7 9 Favorite 7 10 Audio Select 7 11 Subtitles Select TROUBLE SHOOTING ah CELOSA A o SPECIFICATION mhrs o aa A rat ane A A A ia U1BON oo oy 3 lt p FERGUSON SAFETY INSTRUCTIONS Please observe all warnings and instructions on the equipment and contained in these operating instructions You must install the dish with correct direction and angle Please carefully read this user s manual before Please place the receiver in horizontal and w using the receiver stable conditions keeping it away from ZZ ZZ To avoid electric shock hazards do not open the cabinet refer servicing to qualified personnel only If cabinet is opened warranty will be invalid vibrating If device is
10. PONENT YPbPr Provides a component video output to TV or other equipments AUDIO L R Provides the stereo audio output to TV or other equipments S P DIF Connect to a hi fi system RF OUT UHF RF output to TV set s antenna in OPTICAL Connect to a hi fi system HDMI Connects to the HDMI 576p input on your TV set only FK 7900 UCI USB Connect external USB memory 100 240V Power supply ON OFF Main power switch 7 Setting a satellite dish In order to connect external eguipment including a satellite dish and converter use the installation instructions or assistance from expert installer The precise setting antenna is the basis for good reception Even the best antenna which is ill adjusted will cause problems with guality Even small mistakes can prevent the receipt or very worsen its guality Before the installation make sure whether the place lends itself to that The competent direction can be pre determined by comparing with other antennas Immediately before the antenna can not be any obstacles cover seeking to signal the dish When you are choosing the best place for the antenna to attach and it initially set it still must be carefully adjusted Each antenna is enabling regulatory adjustment screws in vertical position and level In digital receivers regulation is difficult Settings can no be done base on picture because it appears with delay Also available indicators in the menu settings receiver typically operat
11. User manual 4 FERGUSON FK Series ss o e eo YT ERGUSON v awe Gary e a English DBS OOSTERES OSOANIM Corea TEC LP SATELLITE DIGITAL DECODING LED GaP dano EPG EE DISPLAY PLAYBACK PLAYBACK WARNING On the USB Memory Function for FK x900 series model user can make recording or playing function using by external USB devices such as USB Flash Memory Disk or external USB HDD Hard Disk However below condition should be remarked before applying REMEMBER 1 To use the external USB device the device has to be supported by USB 2 0 In case of the USB flash memory disk for recording we suggest to use USB2 0 by SLC type with writing speed over 9 0MB s for stable recording and playing 2 Please make sure the USB device condition is set as FAT32 before using To make FAT32 condition user can make format function on their personal PC 3 External hard drives HDD should contain their own power supply unit CAUSION 1 Please do not remove the external USB device from the receiver during the recording or playing in USB mode Unexpected action could make damaged condition for either the receiver and the external USB device 2 Do not touch with wet hand in any cases 4 FERGUSON 2 SAFETY INSTRUCTIONS iva A AAA A AAA A ba EA Gy OF WY SOFTWARE FOR DOWNLOADING SYMBOLS USED ON THE RECEIVER ar GENERAL INFORMAT O N uu ynei A a No x Main Features nandien and
12. a installation the elevation scale on the antenna mount must be set for a satellite as close to south as possible In the southern hemisphere you would be looking for a northern most satellite The selected satellite should lie within 5 of your southern most position the southern most position being equal to your local longitude For example if your local longitude is 73 west then the satellite you select should be located within 5 of 73 west or within the range 68 to 78 west USALS greatly simplifies the antenna setup Ferguson receiver simply asks you for your local geographical coordinates and calculates the satellite positions on its own using a complex mathematical formula The receiver then drives the motor directly to the selected satellite position Once you have a signal you need only finely adjust the antenna mount and horizontal position on the mast itself for maximum signal If the initial southern setting was slightly off it would now be corrected Once the first satellite is perfectly set all the other satellites in the arc would also be automatically set as soon as the orbital position of these additional satellites is entered into the receiver Without USALS the alignment of the antenna system is somewhat more difficult DISEgC 1 2 drives the antenna to the selected satellite position in almost the same way But since the local geographical data is missing the motor drives to a satellite position based on the prime
13. able or satellite but also by digital terrestrial methods SCPC Single channel per carrier refers to using a single signal at a given frequency and bandwidth STB Set top box Receiver device that processes an incoming signal from a satellite dish aerial cable network or telephone line TP Transponder One of the transmitters on a satellite A transponder transmits on a particular frequency to which a set top box must tune to receive a signal Typically each transponder can carry multiple compressed digital television channels DiSEqC Digital Satellite Equipment Control is a communication protocol for use between a satellite receiver and a device such as a multi dish switch or a small dish antenna rotor It is compatible with the actuators used to rotate large C band dishes if used with a DiSEgC positioner USALS Universal Satellites Automatic Location System is a satellite motor protocol that automatically creates a list of available satellite positions in a motorized satellite dish setup It is used in conjunction with the DiSEgC 1 2 protocol Z FERGUSON SPECIFICATION TUNER Input Frequency 950 2150 MHz Loop Out Frequency 950 2150 MHz Input Level 65 25 dBm Input Impedance 75Q LNB Supply 13V 18V OFF Imax 400mA Demodulation Type QPSK Roll Off Factor 0 35 FEC 1 2 2 3 3 4 5 6 7 8 Automatic Reed Solomon 204 188 t 8 Symbol Rate 2 0 l
14. and moves the cursor up down in the Menu voL lt gt Increases Decreases the volume levels or changes the setting in the Menu OK Shows the Channel List on the screen and use to make selections in the Menu MENU Shows the Main Menu on the screen 0 FK 6900 CR Insert smart card insert always chip side down 5 1 CI Module CAM and smart card applicable only for FK 7900 UCI Inserting a CI Module with Smart card CI Module looks like a PC Card called PCMCIA for laptops There are different kinds of CI Modules suitable for different coding systems 1 Turn off your set top box first 2 Insert the Smart card into the Common Interface CI module 3 0pen the CAM door and insert the CI module completely into the CAM slot on the right of front panel If you want to take CAM out please press handspike of CAM slot 4 After correctly inserted please turn on your set top box it allows you to watch scrambled channels Note Ensure the Smartcard or CI module is inserted in the right direction Inserting in the wrong direction may cause damage to the CI module 2 Warning Don t attempt to remove or insert the smart card while the receiver is on 4 FERGUSON 8 6 Rear Panel LNB IN Connect to satellite antenna IF input from LNB to digital tuner LOOP OUT Connect to another receiver IF loop through output from digital tuner TV Connect to TV using SCART cable VCR Connect to VCR using SCART cable COM
15. any hard disk placed in a housing with its own power The only condition is that assumption on the disk one primary partition and reformat it in FAT32 2 We recommend that you keep backing up data on a personal computer A large number of audio files can slow down the work of the receiver slow loading files 8 6 Connect RF Port 1 Plug the receiver with cable TV 2 Search for TV channel which gives the receiver 4 FERGUSON 12 8 7 Connect to an other STB 1 Connect to an STB as following figure NA A UWAGA zo 13 lt p FERGUSON 8 8 Setting motorized satellite dish Proper work of Ferguson receiver ensures motorized system by USALS company Stab To connect the installation of the dish with motorized system USALS connect the output of USALS to LNB IN on rear panel of Ferguson receiver The motor is what actually moves the antenna between the various satellite positions and is installed in between the antenna mast and the antenna mount It is designed such that the axis of rotation is aligned with the North Star This type of mount is often referred to as a Polar Mount As a result azimuth and elevation do not have to be adjusted individually Instead the antenna rotates on only one axis The antenna motor is installed on the already existing vertical mast The local latitude position of the location is then setup on the motor s scale thus aligning the axis of rotation in the correct position Similar to a fixed antenn
16. art to attach channel to desired group Press EXIT to save In the pane to choose the group favorites there is also the possibility of changing the name of it To do this select group and press the RED button 20 4 6 Save Restore This option allows you to save or restore the channel list receiver gt USB This feature allows you to save the current list of channels to file USB gt receiver This feature restores the saved file with a list of channels Note the current list will be irreversibly removed and replaced by that of the selected file Rename choose to rename file with channel list Del choose to delete channel list file Menu Language Select the desired language for menu TV Mode Two selections are provided PAL or NTSC To select the on that fits your television Screen Format To select your receiver output display format between 4 3 and 16 9 RF Mode If TV is connected with your receiver through RF cable select an UHF channel The range of channels and frequency value are different Select the desired RF mode among PAL DK PAL I PAL B G and NTSC M RF Channel Input the UHF channel number which is same as of your TV set The files necessary to upgrade are available only on the website of the Tapa Nino manufacturer To update the receiver software save the file on a USB Then use keys left right to select correct file press the BLUE key and confirm OK to start upgrading A Note All informa
17. delete a service 1 Select the channel you want to delete and press GREEN key to confirm 2 After pressing GREEN key a scissors mark appears on the right side of the selected service name That means this service is going to be deleted Press GREEN key again to cancel the deleting mark 3 After pressing EXIT and leaving the channel will be removed gt Warning If you delete a service from the current activated list it is also deleted from all lists To move the channel 1 Select the channel you want to move and press YELLOW key on the RCU 2 After pressing YELLOW key a arrow mark appears on the right side of the selected service name That means this service is going to be moved Press YELLOW key again to cancel the moving mark 3 Then move cursor to the position you want to place 4 Finally press OK key to confirm To lock a channel please follow the instructions shown as below 1 Select the desired channel and press YELLOW key the message box with asked entering password will be displayed on the screen The default password is 0000 2 After entering password a padlock mark appears in the selected channel name It means that this service is locked If somebody want to play this channel the correct password is required To add a channel to one of the favorite group 1 Select the desired channel and press FAV key 2 A list of all favorites groups will be shown 3 Press OK to mark with symbol of he
18. e line to another line 2 Use the left and right keys to move the cursor left or right the sub menu 3 Use the OK key to enter the sub menu 4 Use the EXIT key to leave the menu and return to the view mode 5 In a sub menu use the OK key to confirm the selection the Green bar indicates the active selection 15 lt P FERGUSON THE MENU INFORMATION Press MENU key on the RCU to display the following menu on the non menu mode The menu consist of 6 sub menus such as the following Installation User Preference Utility Channel List Edit System Setting Timer Setting AuUAWNE OF Satin GB Installation 1 Installation 1 1 Satellite Select the desired satellite by using arrow keys You can also press OK GOR key to display a draw down list the pre programmed satellites is list here You can select one or more satellites by using arrow keys and Hoh Frea press OK to confirm The selected satellites will be marked with the symbol By pressing the right arrow gt you can go to the editing of the satellite To save your changes press EXIT You ll return in this manner to the list of satellites 1 2 Antenna Config LNB Type Select the desired option among WideBand User Standard Installation and Universal1 High Frequency The settings can be altered using the numeric buttons S Low Frequency The settings can be altered using the numeric keys MER LNB Power If your receiver is connected to the LNB se
19. e the longitude of the local satellite antenna Local Latitude Enter here the latitude of the local satellite antenna Dish Position Set the position of antenna Go to Reference Select YES or NO Go to Press OK to toward the satellite 1 5 Edit add new Transponder Installation Edit TP First choose a satellite and press the green button Sat TP to see the list of satellite transponders Select a transponder then you ll be able to adjust the parameters chosen transponder Mode Select whether to edit the selected transponder or add new to the list Frequency enter the frequency of improvement Symbol Rate enter the correct symbol rate Polarity select the polarity Press OK to add a new TP on the ADD TP item 17 4 gt FERGUSON 1 6 Single Search instalacia la h Mode reh Mode The function is used to search channels in one satellite which has been selected Press red key to enter the search window First select search mode by using arrow keys and press OK to start search The function is used to search channels from several satellites at the same time To search several satellites in one after another select the desired satellite and then press the red button to display the search window To search Transponder choose a satellite and press the green button to go to the list of Transponder Choose or add a new transponder select it and then press the red button to display the search box
20. e transponder 1 Press the REC button to display a list of channels from the current transponder Next points does not apply to model FK 7900 UCI In this model when you press REC it just start to record current channel 2 Use arrow keys to select channel you want to record Currently viewed channel is highlighted in red 3 Confirm OK to begin recording If you choose a different channel than current receiver will start recording selected channel in the background while remaining on current channel Information bar indicates what channel recording and viewing Please note that the bar is automatically hidden in accordance with time set in the menu To view it again use the INFO gt To complete the recording press STOP W or EXIT 4 FERGUSON 22 7 2 USB PVR key This option is available only if external USB memory was N properly connected ES MP3 this option provides simple audio files player JPEG this option providers simple pictures browser PVR in this submenu you can set different record events To set it choose desired options and press EXIT to save My recordings this option provides simple browser and player of recorded files 7 3 Time Shifting TIME z N This feature only works when properly connected external USB memory SHIFT amp The Time Shifting mode enables the user to pause and control live TV From the moment the receiver Ferguson is in Time Shifting mode it will continuousl
21. e with a delay so the regulation can take a long time and be very inaccurate For the antenna setting is necessary some meter antenna signal Meter turns on a cable television converter between a receiver We will confirm the presence of switch voltage converter with a tuner and will show the size of the signal to satellites encountered We invite you to benefit from expert assistance installer 9 Z FERGUS 8 Connection Diagram The following figure shows cable connections required for TV and other related electrical equipment If you need any assistance for specific equipment connection please contact your local dealer 8 1 Connect to TV with HDMI cable 576p applicable only for FK 7900 UCI 1 Connect LNB IN port on receiver to a satellite dish 2 Connect HDMI port on receiver to HDMI port on TV ed i 8 2 Connect YPrPb Port recommended 1 Connect LNB IN port on receiver to a satellite dish 2 Connect to TV as following figure ACHTUNG E UWAGA I lt p FERGUSON 10 8 3 Connect SCART Port 1 Connect the antenna with LNB IN of the STB 2 Connect to TV as following figure 8 4 Connect Audio System 1 Connect the antenna with LNB IN of the STB 2 Connect the SPDIF or OPTICAL with Digital Theater Systems to enjoy higher quality sound 3 You can also connect AUDIO L R with AUDIO IN L R of audio system by using the RCA cable 11 Pp FERGUS 8 5 Connect USB Port 1 The receiver supports
22. ira coud de niet eet ab y AG ddeg gd fwd hated tue A yR atic EY SDN As Unpacking e een General Operation of STB Remote Control Unit RCU 500 EFRON Paneli iu Ye Wen ies o an Ad Y nw dci dd 5 1 CI Module CAM and smart card applicable only for FK 7900 UCI AREAL Panek rys ea ue A Y lane Setting a satellite dish Connection Diagram eiu riw a WN weed RYN AW Y End 8 1 Connect to TV with HDMI cable 576p applicable only for FK 7900 UCI 8 2 Connect YPrPb Port recommended Ga Connect SCART POM Errar ER AA NT DG MON HOU EAR HAN DRA 8 4 Connect Audio System 8 5 Connect USB Port SA SG C nect RF Port orbe sien GY YNA O FFY AYRA TR WW EU ONN FE N D YN Hk wn DN Sen s an GY HF EYN Nod Sd 8 7 Connect to an Other ST Beevers aeaa A A EA TU evened le y tetas 8 8 Setting motorized satellite dish FIRSISSTEPS A em ac MENU INFORMATION ceeeeeeeeee HY YA Yn Y nh THE MENU INFORMATION nsec aan Lun inicia as dan 1 1 Satellit amp ms mie A A Ai niexeavecas TEONE EN ELA keane 1 2 Antenna Gonfigiituui eiii GRE Y RW FR CH obiganintns GAA ANO RONA ENA enka WROL DES AARON RSC SR AAT CN TWRW R Ae 1 3 SWItch iie 1 4 Positioner sie 1 5 Edit Add New Transp dera nd di aa YR in A SON Cr Y Fd cannes TG SO O ds Gs ace DG Ae 1 7 Multi Search 1 8 Transponder Search 2 User Preference 2 1 Parental Control 3 Utility iia ias 4 Channel Edit 4 1 Name Channel 4 2
23. lect YES But if 2384 your STB is connected to another receiver through Loop Through support you should check which receiver is connected directly to the LNB In case the other receiver is directly connected to the LNB then select OFF Swith switching system settings Positioner motorized dish settings 1 3 Switch The individual satellite can be allocated directly to a DiSEqC position Please select the proper your cable installation switch and port option 1 4 Positioner The settings is for the motor control of the satellite antenna These only apply to an antenna with corresponding function USALS or DiSEqC 1 2 Caution Leave the setting up of the motor control to properly trained personnel Otherwise gt the satellite equipment may not function correctly 4 gt FERGUSON 16 1 4 1 DiSEgC1 2 ation 4H ble lelalala la la pel Satellite Make a choice from the pre programmed satellites Transponder Select the desired TP under the current satellite Limit Setup Select among Enable Disable East limit and West limit Movement To move the antenna until it is turned into the desired direction Nudge To nudge the antenna until it is turned into the desired direction Recalculation Select YES or NO Go to Reference Select YES or NO Satellite Make a choice from the pre programmed satellites by using arrow keys TP Select the desired TP under the current satellite Local Longitude Enter her
24. moved from warmer place to a colder one some problem might occur Please switch off the receiver and turn it on after 1 or 2 hours Please switch off completely the receiver Keep the receiver away from flower vases YE during thunder during abnormal phenomenon tubs sinks etc in order to avoid damaging before cleaning it and in case it remains out of the eguipment Do not touch power supply service for a long period with wet hands i Don t put any objects on the receiver Cpe Do not expose the receiver under the sunlight ENT And keep it away from the heat source or humid environments Do not block ventilation holes of the receiver so that air can circulate freely Be sure to turn the receiver off and disconnect the AC power cord before cleaning the receiver surface If the surface is dirty wipe clean with a cloth which has been dipped in a weak soap and water solution and wrung out thoroughly and then wipe again with a dry cloth Do not connect cables while power is plugged Do not use damaged cables for connections you could cause fires Please switch off completely the receiver while making all connections The product purchased is a sophisticated electronic device which is not suitable for children under 18 years We do not assume responsibility for damages caused to people or object deriving from use of the device made by people under 18 years SOFTWARE FOR DOWNLO
25. nels from more than one satellite and want to have a Channel list for each satellite press SAT key on the RCU a satellite list will be displayed on the screen On the red is highlighted list which you E are currently using 01 AI i 109 Astra 4 7 6 Channel list While watching press OK key on the RCU to display a channel list To r select a channel by using arrow keys then press OK to play the selected 2 channel 130 PREMIERE 3 And furthermore you can also sort and change channel list by using 1308 PREMIERE SERIE corresponding operation 1399 PREMIERE KRIMI 1400 SEASONS 1401 G CINEMA EMOTION Press GREEN key to display a box with sorting method The channel will sort according to your choice xta NOTE sorting alphabetically is dependent on name of the channel broadcast by operator Due gt _ tothe frequent use of hidden or special characters not always channels will be sorted according to our expectations 4 FERGUSON 24 7 7 Quick Find After pressing BULE key the Quick Find window will be displayed Select the first letter of the channel name which you want to find at the alphabet the relevant channels will be display in the channel list You can use letters corresponding to numerical key and type 2 channel name the same way as SMS Watching any of channel from channel list press EDIT key on the RCU to enter the Edit channel window 7 9 Favorite Press FAV key to display a box wi
26. nput box of New Password press numeric keys on the RCU directly 2 Enter the new password again in the input box of Confirm Password 3 After finishing the above settings press EXIT key to exit from this menu Note Don t forget your password if you forget it please ask seller for help 3 Utility The STB provides calendar calculator and utility to format USB storages Utility Utility Calendar A Format USB provides two different options Utility Y er Format this option will remove all data from connected USB A disk Press red button and confirm if you are sure what are you doing This operation is irreversible Delete all recordings this option will remove just recorded files from main folder 4 Channel Edit 4 1 Name Channel To rename a channel Channel List Edit 1 Press RED key A ENE 2 Select the desired channel 3 Press OK to enter the keypad dialog window In the window GREEN key can be used to cancel a letter on the caption bar at a time RED key is used to cancel all letters BLUE key is used to place a blank Arrow keys are used to move the cursor OK is pressed to confirm Press EXIT key to save the settings 19 4 gt FERGUSON 4 2 Delete Channel Channel List Edit Ail Satellite PREMIERE 2 MIERE 3 MIERE 4 MIERE SERIE 4 3 Move Channel 4 4 Lock Channel Channel List Edit Ail Satellite Channel List Edit AW Satel Favorite 4 gt FERGUSON To
27. t 45 MS s AUDIO VIDEO PROCESSING Audio Standard ISO IEC 13818 3 Audio Channel Mono Dual channel and Stereo Audio Decoding MPEG 1 amp MPEG 2 layer I and II Audio Sampling Frequency 32 44 1 48KHz Video Standard ISO IEC 13818 2 MPEG 2 MP ML Aspect Ratio 4 3 16 9 Video Resolution 720 x 576 PAL 720 x 480 NTSC Video format 4 3 16 9 AV OUTPUT Video De emphasis CCIR REC 405 1 625LINES Video Bandwidth 5 5MHz Video Output Impedance 75Q Video Output Level 1 0Vp p Audio Output Frequency 20Hz 20KHz Audio Output Impedance Low FRONT PANEL IR Receiver 38KHz POWER SUPPLY Input voltage AC100 240V 50 60Hz Power consumption 18W AMBIENT Operation Temperature 0 40 C Size 291 5mm W x 217mm D x 54mm H Weight 1 8Kg
28. th various favorite groups A program can belong to several groups but a group cannot include the same program Remember that on this list shows only used group If you not 2 assigned to any group any channel this list will be empty Press AUDIO to set audio mode stereo left and right Select language in case of multilingual program Press SUB T key on remote control to select subtitles screen as long as they are broadcast on the channel 25 4 gt FERGUSON TROUBLE SHOOTING Problem Possible Causes What To Do The display on the front panel does not light up Main cable is not connected Check that the main cable is plugged into power socket No sound or picture but the front panel red light is ON The unit is in standby mode Press the standby button No sound or picture The satellite dish is not pointing at the satellite Adjust the dish Check the Signal Level in the Antenna Setup menu No signal or weak signal Check the cable connections LNB and other eguipment connected between the LNB and the receiver and or adjust the dish Bad picture Blocking error The satellite dish is not pointing at the satellite Signal is too strong Satellite dish is too small Adjust the dish Connect a signal attenuator to the LNB input Change to a larger dish LNB noise factor too high Change to an LNB with lower noise factor The LNB
29. tion and channel list will be lost We 4 recommend that you write channel list before the upgrade Receiver gt USB This option allows you to save the current version of software on a USB memory 5 2 SmartCard Info This menu displays some information of the receiver System Setting mf a 7 rd Info At this point you can check the expiration date of your smart card This option is not always available and depending on the operator 21 lt P FERGUSON 5 3 System Information This menu displays some information of the receiver 5 4 Factory Default Enter the menu with four digit number password by default 0000 then click OK to delete all data and restart your receiver A NOTE On selecting factory default you will lose all of data gt N channel list and information which was previously installed Factory Default OR Enter The function allows you to program 5 kinds of various timer Timer Number Select the number of the timer Enable Select YES or NO If select NO you can t set the following item Channel Number Enter the desired number of the channel Timer Type Set daily or one time Event Type Press arrow keys to pick the desired option 7 General Viewing Function 7 1 Recording N This feature only works when properly connected external USB memory The receiver has called SEMI TWIN TUNER this feature allows while recording watching another channel broadcast from the sam
30. y record the source from satellite into its buffer The buffer is created automatically on the external USB memory Pause Live TV 1 Press the PAUSE key 2 The screen will then show the time progression bar Please note that the bar is automatically hidden in accordance with time set in the menu To view it again use the INFO AW 3 Press PLAY to resume The Ferguson receiver will continue to record what is broadcasted live while you are watching previously broadcasted programme Review Time Shifting buffer play back live TV moments 1 Switch to Time Shifting mode 2 The Time Shifting buffer is available for reviewing Use the FF and REV buttons to navigate through the Time Shifting buffer and press PLAY to play Deactivate the Time Shifting mode To deactivate the Time Shifting mode press EXIT key 23 4 gt FERGUSON 7 4 EPG The receiver provides EPG function for you to get access to the TV Guide or Radio Guide if you are listening to radio channel that will show the titles and other information of the current and next programs on different channel The information is only available from the network to which the channel you are watching Press EPG key on the RCU to display the Program Guide window Press BLUE key to enter the schedule Press GREEN key to display the detail information of the selected channel Press RED key to set the recording timer directly from EPG data 7 5 SAT List If you searched chan
Download Pdf Manuals
Related Search