Energy Fireplaces: Manual Installation, Operation & Maintenance
Contents
1. 1 2 3 4 5 6 REVISIONS 600 pu 303 REV DESCRIPTION DATE APPROVED i i 1 1 1 1 i 1 i E 5 8 o 5 E 8 3 9 1 5 8 6 5 2 1 1 Yo 1 1 8 1 1 0128 80 25 L 80 80 pes u 50 422 810 870 DIMENSIONS ARE IN MILLIMETERS me TOLERANCES IN MICROMETERS PREPARATION DATE k D AONTZIOY MAPIA 17 01 2012 Straight 75 santorini ENGINEERING DATE Basic views WG No APPROVAL DATE MATERIAL MACHINING TOLERANCES ie 1 2 3 4 5 6 1 2 3 4 5 6 REVISIONS REV DESCRIPTION DATE APPROVED 1 ch A 1 1 5 2 x 3 2 oR 5 8 i 5 81 LU amp 1 1 TT E 258 40 1158 su 1200 579 1 5 1 DIMENSIONS ARE IN MILLIMETERS mE TOLERANCES IN MICROMETERS PREPARATION DATE D AONTZIOY MAPIA 17 01 2012 Straight 120_arctica ENGINEERING DATE Basic views DWGNO APPROVAL DATE MATERIAL SCALE 1 20 WEIGHT SHEET 1 0F 1 TECHNICAL CHARACTERISTICS Three sided fireplaces TECHNICAL CHARACTERISTICS External dimensions mm Internal dimensions mm2. Note 1 The results of testing are valid only for the samples tested Copying of this Protocol or parts of it can is not authorized without a written agreement of the Laboratory Manager and the Manager of Termo Test Consult LTD 2 8 4 kg h Note 2 Fuel consumption 8 4 kg h 3 ce Note 3 The appliance should be placed on market equipped with cold hand device for operating the handles ensuring safe work by the user 4 na 30 0 04 W mK Note 4 During the testing the walls of the trihedron were lined with mineral wool with thickness of 30 mm and with thermal conductivity of 0 04W mK Total Pages 12 Page 12 49
3. DIMENSIONS ARE IN MILLIMETERS me TOLERANCES IN MICROMETERS 8 PREPARATION DATE AONTZIOY 17 01 2012 Q uattro 90 etna ENGINEERING DATE Basic views DWGNO APPROVAL DATE MATERIAL MACIAS TO ENCES SCALE 1 15 WEIGHT SHEET 1 OF 2 gt TECHNICAL CHARACTERISTICS Water jacket Boiler fireplaces Voda Boiler 75 mn External Depth dimensions mm un Internal dimensions mm Flue coupling dimensions Nominal heat output Efficiency Fuel consumption Kg h temperature om TECHNICAL CHARACTERISTICS REVISIONS 810 REV DESCRIPTION DATE APPROVED 70 ao A gt 1629 1248 1219 805 717 403 fe 340 4 229 1 1 1248 1098 1 2 EN T LL i lac 595 602 722 800 Fe 870 DIMENSIONS ARE IN MILLIMETERS me TOLERANCES IN MICROMETERS PREPARATION DATE D AONTZIOY 17 01 2012 75 ENGINEERING DATE Basic views DWE No APPROVAL DATE MATERIAL MACHINE TOLERANCES SCALE 1 20 WEIGHT SHEET 1 OF 1 2 3 4 CERTIFICATES CERTIFICATES TSIAKMAKIS BROS KAMINI company has conformed with all the procedures for fireplaces certification so with compliance with European safety standards CE so with patent in their operations The relevant certific
4. OULEUEN cuokeur c TNS the fireplace and the flue KATTVOSOXOU 5 The appliances are designed for intermittent burning of 5 Ol cuokeu g EXOUV solid fuel wood logs OTEPEWV EUAOU 6 It is not allowed to use the appliances in shared flue with 6 Aev ETTITR TTETOI GUOKEUU V HE other appliances stoves fireplaces CUOKEU G 7 Each appliance is supplied with assembly and instruction 7 eyxeipidia cuvappoA ynong manuals written in the language of the country it is delivered YAwooa ornv omoia to according to Article 7 of 13299 2001 A1 2003 pe 7 Tou TTPOTUTTOU A2 2004 AC 2007 EN 13299 2001 A1 2003 A2 2004 AC 2007 The declaration expires in case of any changes of the product Travel IOXUEI Oe TTEPITTTWON TOU construction production process or materials used to rj n rou produce it THY TOU
5. Thessaloniki 21 11 2011 Aa pemaeni ANEZANSPOS Signature of the authorized person CERTIFICATES Initial type testing according to EN 13229 2006 OT 0089 23 02 2012 TERMOTEST CONSULT LTD Sofia Authorised Body for Testing the Compliance of Building T T C CPD 09 NB1999 14 01 2008 Products Licence CPD 09 NB1999 dated 14 01 2008 by NB 1999 the Ministry of Regional Development and Public Works MRDPW Identification Number NB 1999 of the Registry of the European Commission Address of registration bi 10 vh A ap 9 HEK 10 9 Sofia Bulgaria na Laboratory for Testing of Heating Appliances Using Solid Ha Fuel Address N 132 132 Kliment Ohridski blvrd Sofia Bulgaria 0886 537 981 tel 359 886 537 981 e
6. AAEEANAPOX AIEONHY INT CL F24B 1 188 Evpsoutsyvias 167081 14 4 2030 22 A va 11 05 2011 NOMIKO AIKAIOY ANO TO TIAIAEIAZ A B M amp FPAMMATEIA EPEYNAX amp CERTIFICATES Manufacturer Declaration of Conformity CERTIFICATES y Taf C KATAZKEYAZTH DECLARATION OF MANUFACTURER APOI TZIAKMAKH Manufacturer TSIAKMAKIS BROS CO Over ring road Olimbiados str Evosmos ENEPFEIAKA TZAKIA Product ENERGY FIREPLACES Xp on Use Internal use Mpoi vrwv Aoy kwv Directive Construction products 89 106 89 106 13229 Standard 13229 Inset appliances including open AVOIKTWV EOTIWV TOU fires fired by solid fuels Requirements and KA OINA ATTAITHOEIS test methods AnAwvw pe OATTOKAEIOTIKA pou 0 declare under my sole responsibility that the products to orro a a
7. dimensions Nominal heat output Efficiency Fuel consumption Flue gas mass flow Content of CO Mean gas temperature nisyros oxygen Three sided 60 Three sided 75 vesuvios Three sided 90 1700 8 9 9 3 TECHNICAL CHARACTERISTICS 1 2 3 4 5 6 REVISIONS 706 525 DESCRIPTION DATE APPROVED fa__ 510 180 1 1 3 B 2 A o men 8 8 8 8 14 2 i LILI A 1 123 DIMENSIONS ARE IN MILLIMETERS TOLERANCES IN MICROMETERS Three sided 60 PREPARATION DATE N D DONTSIOU MARIA 01 12 2011 nisyros ENGINEERING DATE n H aworo Basic views APPROVAL DATE MATERIAL A4 SCALE 1 15 WEIGHT SHEET 1 0F 1 1 2 3 4 6 1 2 3 4 6 REVISIONS DESCRIPTION DATE APPROVED 120 92 1 1 T o 8 a 28 B 8 L 2 N n 390 1008 626 250 j 0242 je DIMENSIONS ARE IN MILLIMETERS TOLERANCES IN MICROMETERS PREPARATION DONTSIOU MARIA ENGINEERING
8. that conserves the temperature and helps N Kap v 4 INSTALLATION INSTRUCTIONS the right draught and the avoidance of liquidation of the exhaust gas in the internal of its walls gt Every chimney should be connected to exclusively one appliance fireplace stove boiler etc gt The internal diameter of the chimney should be consistent with the specifications of the manufacturer gt The profile of the chimney is advised to be circular because by this way the smooth flow of the exhaust gas is assisted the friction is eliminated and the attachment of burn products smog tar at the walls is avoided gt In case of square or rectangular profiles the corners should have radius gt 20mm gt The height of the chimney should be gt 3 5 m from the top of the device and where a corner is needed to be constructed this should be gt 45 9 The common use of the same chimney with other appliances is prohibited No passing of water pipes air conditioning or power cables inside the chimney is permitted TSIAKMAKIS BROS CO assumes no responsibility in case of injury or property damage if the installation instructions of the chimney are not followed Chimney outcome hat The chimney ending hat is the device at the end of the chimney and is used to prevent the inflow of foreign bodies inside the chimney and the smooth flow of the exhaust gases to the atmosphere The hat should N Kapivi 5 INS
9. fireplace forced by the fan which is placed at the bottom of the fireplace The air is pushed through the first air chamber where is preheated by the contact with the combustion chamber The combustion is assisted by the secondary chamber placed inside the combustion chamber which emits more air to complete combustion and eliminate the monoxides The air then enters the second air chamber which is placed inside the combustion chamber and is responsible for the 70 of the total heating of the air When the air comes into the third air chamber it comes in contact with the fireplace chimney through which hot exhaust circulates and thus heats the air even more The hot air comes out of the fireplace through the tubes at the top of the fireplace and the exhaust is led through the chimney to the environment The fireplace is also equipped with 1 a sliding door mechanism which has e Rollers with bearings e Wire for noiseless operation N 11 INSTALLATION INSTRUCTIONS e Counterweight e Telescopic guides for smoother use e Wick to fully seal the door 2 Automatic damper mechanism for the exhaust gas 3 Sliding and hinged door made of ceramic glass 4 Knob for the controlled adjustment of the combustion air N 12 INSTALLATION INSTRUCTIONS Warm air outlet to the environment z Exhaust outlet Sliding door mechanism 1 Rollers with bearings 2 Wire for noiseless operation and durabil
10. APPROVAL MACHINING TOLLERANCES DATE 01 12 2011 DATE DATE TE Three sided 90 vesuvios Basic views DWGNO MATERIAL SCALE 120 WEIGHT SHEET 1 OF 1 TECHNICAL CHARACTERISTICS Quattro fireplaces TECHNICAL CHARACTERISTICS nemesis Quattro 50 External dimensions mm Internal dimensions mm dimensions Nominal heat output Efficiency Fuel consumption Flue gas mass flow Mean gas temperature erevos Quattro 75 etna Quattro 90 TECHNICAL CHARACTERISTICS 1 2 3 5 6 REVISIONS REV DESCRIPTION DATE APPROVED B 8 1 18 127 558 T_ 603 e DIMENSIONS ARE IN MILLIMETERS me TOLERANCES IN MICROMETERS PREPARATION DATE D AONTZIOY 17 01 2012 Quattro 50_nemesis ENGINEERING DATE Basic views DWE No APPROVAL DATE MATERIAL MEGAN TOLERANCES SCALE 1 15 WEIGHT SHEET 1 OF 1 1 2 3 4 5 6 1 2 3 4 5 6 209 ke REVISIONS XY _ REV DESCRIPTION DATE APPROVED a 75 I 1 18 5 9 S 28 8 Sooo eee CoCo o o 3 8 ys 8 12 o Y Y E 250 L 900
11. CE TSIAKMAKIS BROS CO KAMINI Energy Fireplaces Users Manual Installation amp Operation TSIAKMAKIS BROS Manual Installation Operation amp Maintenance The present installation and operation user s manual is part of the harmonization study for the Kamini s Fireplaces with the European directive for safety 89 106 EEC for Construction products According to the study the appliances are able to bear the CE marking The present manual has been composed and published by the manufacturing company TSIAKMAKIS BROS KAMINI Over ring road Olimbiados str Evosmos Thessaloniki p c 56224 Greece T 30 2310 559150 e F 30 2310 559150 www tzakiatokamini gr For the publication of this manual the company has co operated with the technical consultants RI ROTSKOS D ATHAN amp COLLABORATORS TECHNICAL CONSULTANTS STUDY amp CERTIFICATES CE ISO 9001 ISO 22000 AUTHORIZATIONS OF OPERATION amp AUTHORIZATIONS OF BUILDINGS TEL 30 2310 320094 320197 amp 30 2310 500053 FAX 30 2310 302084 Head office 179 AI Papanastasiou str P C 542 50 Branch office 13 Aphrodite s str P C 546 29 Thessaloniki Greece e mail info rotskos gr http www rotskos gr Manual Version 1 0 Table of Contents dl EAE 29 8 Technical characteristics 31 ARA APRA 43 Manual Version 1 0 INTRODUCTION Chapter Introduction A
12. N DO NOT DISCARD THIS MANUAL Important operati ng and mainte Read understand and nance follow these instruct instructions for ions safe include installation and d operation Dear customer TSIAKMAKIS BROS CO KAMINI highly appreciates your choice of its product a result of systematic study and embodying long term experience on the fireplaces field The product of TSIAKMAKIS BROS CO KAMINI has been designed to provide the utmost in safety reliability and high efficiency gt For your safety and better use of the fireplace please read the users manual thoroughly before installation and operation Pay special attention to all cautions and warnings N 2 INTRODUCTION gt This manual should be retained for future reference We suggest you keep it with your other important documents and product manuals gt 7he information contained in this manual unless noted otherwise applies to all models and refers to the buyer user of the appliance and anyone else is implicated on the installation and maintenance gt Any change or intervention on the appliance except all mentioned in the present manual is forbidden gt installer has to apply all the installation instructions that are mentioned in the present manual to do the first start and deliver the appliance only if its function has been thoroughly understood by the end user The installation should be performed by well trained and qualified personn
13. Ne 0089 23 02 2012 Analysis and Specification of the solid fuel used for testing and provided by the Laboratory Ha Fuel Type Humidity Ash content Hydrogen content Carbon content Specific calorific value kJ kg Wood logs 12 5 28 0 15 43 21 0 52 17719 90 ev oon amp amp Carried out testing eng N Ninov Laboratory Manager A Dimitrov sir name signature sir name signature stamp 1 om
14. TALLATION INSTRUCTIONS gt Be constructed of materials resistant to weather conditions e g stainless steel gt If the closest obstacle to the chimney is a tree or element inflammable and there is a danger of fire then the minimum distance between the chimney and this element should be 8m gt At buildings where more than one chimney the height difference would be 60cm to prevent inflow of smoke The hat of the chimney should be constructed so that it does not disturb neighboring buildings Installation space The installation location is selected with criterion the safe use of the device the position of the chimney and combustion air flow The installation and use of the device in bedrooms bathrooms and stairwells is prohibited The use of the ventilation system while using the device in the same area is prohibited There is a vacuum risk forcing the exhaust to get out from the device to the room The installation of the device in potentially explosive atmospheres is prohibited The use of the device in cooking areas where gas is used is permitted if there is ventilation The use of camera in places where there is a risk of fire is strictly prohibited Air supply For the operation of the device it is necessary to provide ambient air to the combustion chamber of the device Proper N Kapivi 6 INSTALLATION INSTRUCTIONS air flow ensures proper combustion and provides fresh air to the ventilat
15. ace out excessive smoke when the door gets open The chimney has blocked Check and clean the chimney if needed Increase the profile of the combustion air inlet duct The chamber lets The chimney is Insulate the out excessive not insulated chimney properly 1 gt The chimney does Raise the chimney t not have the to the proper DISSI proper height height higher The profile of the combustion air inlet duct is small TROUBLESHOOTING S N pee Possible Cause Problems from possible conditions obstacles Inappropriate Use appropriate wood wood Inappropriate Chimney The ceramic glass convection inspection is excessively smoky eo ed Open the combustion air regulator Use the right Inadequate volume of wood volume of wood see technical characteristics Inadequate combustion air The fireplace does Choose the Inappropriate size not warm the of device appropriate size of space device or combine Space to be warm with other with warming means Inadequate space Insulate the space insulation appropriately Wrong Check the wire connection connections Thermostat Check or replace The ventilator breakdown the thermostat does not operate Ventilator Check the breakdown ventilator Power supply Check the power interruption supply The volume of the Inadequate Insulate the air warm air is low insulation of the ducts properly and t
16. annual maintenance additional inspections should also be performed Cleaning of the chimney gt Remove the tar and the soot from the walls of the chimney using a special brush Cooking food is not recommended due to the fats that stick at the walls of the chimney with possible risk of self ignition and fire A cnemicats for the separation of soot are not sufficient to clean the chimney A The accumulated tar can be self igniting Carry out regular inspection and cleaning of the chimney MAINTENANCE AND SERVICE Combustion chamber cleaning You should perform daily cleaning of the interior of the combustion chamber because accumulated ash may reach up the grill and may gradually cause malfunction of the chamber The ash pan underneath the grill should also be cleaned every day In case the container fills the air supply to the wood may be cut off resulting poor combustion and soot accumulation in the chamber gt The cleaning is done with the device stopped gt Remove the ash after making sure that there are no burning coals gt Use a metal container for ash removal Before emptying the container into the trash hold it in place away from flammable materials to make sure it is fully extinguished gt The coals that are outside from the fireplace can cause fire il The grate the ash consumables and need replacement after 3 4 seasons of operation Check the sale points for the
17. ates are presented CERTIFICATES Patent certificate CERTIFICATES OPTANIZMOZ BIOMHXANIKHE IAIOKTHZIAX EYPEXITEXNIAX 1007257 vmoyn 8 11 tov v nov 1733 87 EPEVP CEIC texvohoyuc Ev pyetac my 15928 1253 an paon tov Yrovpyov Biounyaviac Ev pysiag Texvohoyiag aimons yw Evpeotteyviac otov OBI B Aiov tv aitnon zov otic 13 4 2010 pe 20100100224 tv kata oAn 4 5 2011 tov 1 Xovc Arov uovue Evpsotteyviag Beopnu va dia ETIOUVATTO LEVA otouc 1 TZIAKMAKH Teopyiov 11 f 56431 OEXXAAONIKHP 2 TZIAKMAKH AAEZANAPO l eopy oo 11 56224 OEXXAAONIKHX TITAOX AIATAEH AIO TZAKI 1 ANAZTAZIOZ 2
18. ating fireplace A closed damper overfires the fireplace and spills smoke and flames into the room Use of the device The device you have purchased is designed to heat with minimized fuel consumption To achieve this you must configure and operate the device properly Follow the instructions for proper use of the device gt During lighting make sure the space is clean and burning remains ash extinguished coals from the previous combustion have been removed The clean device facilitates air circulation between the wood and proper combustion gt For firelighter use some paper or ready trade kindling Do not use fuel for firelighter A Place the wood fuel in a way that reduces the risk of falling outside the device or resting on the ceramic glass There is a risk of fire Opening of the door gt The door should be opened slowly and be left half opened for some time before fully open to prevent any vacuum gt Always use a glove that is provided with the device because many metal parts of the device develop high temperature and there is a risk of burning gt The door should open on the side only if the ceramic glass is required to be cleaned N Kay v 18 INSTALLATION INSTRUCTIONS Do not open the door the device operates the same room with air suction devices hood ventilation because there is a case the smoke enters to the space from the fireplace Combustion adjustment To adjus
19. be lt 30cm The chimney should be insulated with a suitable non combustible material which does not deform at high temperatures In case of high risk it should also be installed additional ceiling insulation material over the device at a distance 30cm from the chimney 9 INSTALLATION INSTRUCTIONS gt If the wall is made of flammable material it should be installed plasterboard and additional ceiling insulation material between the ceiling and the plasterboard The flammable materials that are at a radius 40cm away from the chimney should be removed It is forbidden to install wires in the walls or ceiling at a distance lt 60cm from where the device is installed Failure to follow the insulation rules may cause fire As insulation material ceramic cotton is proposed Operation instructions N 10 INSTALLATION INSTRUCTIONS WARNING DO operate fireplace before reading and understanding operating instructions Failure to operate fireplace according to operating instructions could cause fire or injury A WARNING High temperatures may ignite clothing or other combustible materials Keep clothing furniture and other combustible materials away The fireplace is designed to work with intermittent cycle If you expect that children may come into contact with this fireplace we recommend locking the door of the fireplace Operation description The environment air comes into the
20. eformation has occurred e Is broken e Burn through of grate bars Before every Ceramic WARNING The chamber should be use glass completely off cleaning Use a wet cloth made of non inflammable material SAFETY INSTRUCTIONS Safety instructions Safety distances The zone around the fireplace at least one meter around the fireplace there must be no combustible material e g carpet wooden furniture curtains and any flammable liquids or materials igniter gt Regulate the air exits blinds of the hot air so that they do not have direction on sensitive materials curtains curtain rods Fire prevention gt Do not allow inexperienced persons or children to come in contact with the device without supervision gt Inspect the chimney frequent for the accumulation of combustion residues gt Use only recommended wood fuel gt The use of liquid fuel is forbidden gt Save safely the ash that contains hot coals gt Keep the safety distances listed gt Follow accurately the maintenance guidelines TROUBLESHOOTING Troubleshooting Use dry kindling smaller and dryer wood The air regulator Open the air is closed regulator Open the door more smoothly letting it half open before you entirely open it The wood is too Can t get fire wet started The door opens very quickly There is another The chamber lets Close all the suction device at suction devices the same pl
21. el followed a fire may result causing property damage or personal injury If the information in these instructions is not exactly gt TSIAKMAKIS BROS CO KAMINI is not responsible in any body injury or property damage that may be caused from not applying the installation operation maintenance and safety instructions written in the present manual Your new product will provide you many years of trouble free enjoyment N Kap 3 INSTALLATION INSTRUCTIONS Installation instructions WARNING Installation MUST comply with all local regulations including those relating to national and European standards Chimney introduction The chimney is the duct from where the extraction of the exhaust gas to the environment is performed at the burning devices with natural draught fireplaces stoves The fireplace should fulfill the following specifications gt The structure and the materials should be consistent with the safety rules gt It is forbidden to pass through staircases skylights or ventilation ducts The passing of the chimney through the wooden roof is forbidden except if perimetrical of the duct an extra built wall with adequate heat insulation is constructed Wooden roof components perimetrical to the chimney duct should be placed at a distance 270cm gt The advisable material for the construction of the chimney is stainless steel sheet metal In between the duct an insulating material is placed
22. he air is not air ducts TROUBLESHOOTING Start Fire Possible Cause Problems profile Choose the right choice of the air air ducts profile ducts Loss of air from damage at the air warm enough the air ducts ducts Increase the Low ventilator volume of the air volume from the regulator MARKING Marking Each device is clearly and permanently marked in an accessible place where the information can be read when the device is placed in its final position with the following information The name of the manufacturer Type and description of the model to facilitate the identification of device Nominal heat output in kilowatts The number of the European standard to which it is conformed The performance of the device and the CO category The label has the following form TZIAKMAKH O E EUocpoc OcooaAovikn 56224 TSIAKMAKIS BROS CO Over ring road Olimbiados str Evosmos Thessaloniki 56224 Greece EN 13229 2004 OUOKEUEG NEPIAGHBAVOHEVWV AVOIKTOV OTIOV NOU Kaive OTEPEA Inset appliances including open fires fired by solid fuels 25080 XX KW Nominal heat output XX KW Anodoon Efficiency Katnyopia CO CO category X XXX Movt Ao Model MARKING e g S 120 arctica arctica straight 120 Supplementary label
23. ing initial operation may be irritating to sensitive individuals Open windows for air circulation 16 INSTALLATION INSTRUCTIONS AM WARNING DO NOT throw the wood pieces with force in the fireplace There is danger of crack or chink of the cast iron In no case stop the fire with water There is danger of causing damage to the device AM Do not remove the burning wood from the device There is danger of causing personal injury or fire Grate This fireplace is designed to be used with the grate supplied with this unit The grate may break down over time and may need occasional replacement WARNING Risk of Fire Use only the factory supplied grate gt Keeps logs in place gt Allows proper air circulation around the fire Ash pan This fireplace is designed to be used with the ash pan supplied with this unit The ash pan is used to collect the ashes which are disposed periodically CAUTION The ash pan should be placed correctly with the lower wall opposite the entrance of the air Otherwise the entrance of air flow is restricted and traction problems are caused Flue damper e Must be in fully open position close the door of the fireplace during operation of the fireplace e Before lighting the fireplace verify fully open position by looking up from the inside of the fireplace N 17 INSTALLATION INSTRUCTIONS WARNING Risk of Fire and Asphyxiation Open damper prior to oper
24. is in use After installing the device the first test lighting should be performed to determine the correct installation and operation of the fireplace The first lighting should be done by the installer N 15 INSTALLATION INSTRUCTIONS For the first lighting wood fuel should be used in quantities less than 50 of the nominal consumption of the device The first three or four fires should be of moderate size to allow the bending materials to be burned from the fireplace and paint to cure You may notice an industrial smell during the first few fires This is considered normal gt Ventilate the area leaving a window open gt If the device has a ventilator it should be set under operation gt Open the flue damper to a fully open position To succeed this close the door of the fireplace gt Use twisted paper on the fireplace grate gt Arrange kindling or small pieces of wood to form a tent on the fireplace grate gt Pre warm the flue to establish a draught to help reduce smoke spillage during start up Hold a rolled up piece of burning newspaper under the flue damper for a few moments gt Light the paper to ignite the kindling gt Add small pieces of wood until a hot bed of coals has been established gt Add a minimum of three average size pieces of firewood and not more than six placed to allow combustion air and flames between them CAUTION Smells and vapors released dur
25. ity 3 Counterweight 4 Telescopic guides for smoother use 5 Wick to fully seal the door Outlet of the warm air to the space Automatic damper mechanism for the exhaust gas 3rd air chamber the last phase of air heating that gives the maximum temperature of the fireplace I Second chamber it is located in the combustion chamber It warms the air up to 709 Secondary ch r for E combustion a monoxides ecological burning istair chamber entrance of the outside air through the fan and pre warming of it Combustion chamber made of iron sheets Sliding and hinged door made of ceramic glass Ash collection container Knob for the controlled adjustment of the combustion air Fan for the inlet of the air into the first chamber of the fireplace Adjustable feet for easy installation of the fireplace AY Kapivi 13 INSTALLATION INSTRUCTIONS Wood fuel The device is designed to operate only with wood fuel gt Properly seasoned wood is important for successful operation of your fireplace Most woodburning fireplace problems are caused by burning wet unseasoned wood Seasoned firewood is wood that is cut to size split and air dried to a moisture content of around 18 The wood fuel supply should be carried out if possible during the summer months The continuous use of wet wood is causing pollu
26. mail info termotesteonsult eu e mail termotestconsult eu OT HA INITIAL TESTING OF THE PRODUCT TYPE REPORT 0089 23 02 2012 1 ypeaa Voda Total Pages 12 Page FRA TO Cy KOUIVI KAH 48 CERTIFICATES OT
27. or maintaining as much as possible the moisture content reducing in that way the drying effect of the atmosphere The air supply to the device should be compatible with the technical specifications of the device gt If there is not direct air flow from the external environment then it can be obtained from adjacent areas that have contact with the outside environment via pipelines gt The duct system should be constructed from heat resistant materials gt On the outer side of the air supply louvers should be mounted for blocking importation of foreign bodies and the holes should be able to deliver the required amount of air to the device gt Make sure that during operation of the device the air flow will not stop Power supply In case the device has a ventilator it should be connected to the power supply in a distance gt im from the device through insulated conductor for protection To start or stop operation of the ventilator a switch should be installed at a safe distance from the device radiation area or alternatively a wall digital controller gt A silicone cable is recommended for the ventilator connection gt necessary measures to protect electrical connections from the heat emitted by the device should be taken gt The installation of outdoor decorative lighting to the device is only permitted if the risk of fire from overheating or the short circuit of wires is eliminated The facility sh
28. ould include grounding and electrical safety board as defined by the technical regulations N Kap 7 INSTALLATION INSTRUCTIONS gt The electrical connection should be done only by experienced and qualified personnel 8 INSTALLATION INSTRUCTIONS Ventilator installation gt If hot air is transferred from the device in adjacent rooms the length of the pipelines should be lt 3m with the existing pipe profile 125 gt If you wish the transfer of air at a distance 3m it is proposed to use contractions for reducing the profile 125 to 100mm in order to maintain the initial pressure gt The operation control of the ventilator is done by a digital wall thermostat gt The outlets of the warm air should be separated with a distance gt 35cm from walls and ceilings gt The hot air transfer ducts should be made of smooth stainless steel tube reduce heat losses it is proposed to insulate the hot air transfer duct To connect the fan with the outside air it should be used hose of a 125mm diameter at both entrances of the ventilator The electric connection should be performed only by an experienced electrician Insulation installation To eliminate the risk of possible ignition of flammable materials that are near the device and to minimize heat loss through the walls or ceiling it is suggested gt The minimum distance between the chimney and the roof should
29. s are provided giving the following information N Read and follow the operation instructions N Use only recommended fuels TECHNICAL CHARACTERISTICS Technical characteristics The KAMINI fireplaces are manufactured with the most durable materials Using advanced technology we have created a competitive end product capable of meeting the most modern requirements Made entirely of thick steel they create a waterproof casing offering 100 seal preventing the exhaust escape which often happens in ordinary cast iron fireplaces The fire resistant structure of the device is composed of cast iron plates The glass that are used are ceramic with resistance at 800 C very high resistance to temperature changes and to chemical reactions caused by combustion The fireplaces are dual burning with the capability to adjust the fire increasing or reducing the air flow of primary and secondary combustion The main advantage of the fireplaces is the high efficiency with the low power wood consumption that is achieved by the ability to regulate the combustion TECHNICAL CHARACTERISTICS Straight fireplaces TECHNICAL CHARACTERISTICS santorini ephestus arctica Straight 75 Straight 90 Straight 120 External dimensions mm Internal dimensions mm dimensions Nominal heat output Efficiency Fuel consumption Kg h 6 7 7 0 8 9 9 3 Mean gas wm owe TECHNICAL CHARACTERISTICS
30. s not to leave the door open for a long period The operation mode of the device changes and is likely that due to provocation of vacuum for example by the sudden opening of a door smoke goes out from the fireplace Do not leave the device with the door open Danger of fire resulting from sparks or coals that may fall out of the device make sure you do not leave access to young children while the door is open Stopping a fire The stopping of the fire is done only when the entire amount of wood in the fireplace is consumed Separate the pieces of wood to stop the fire If you wish to stop the fire immediately you can adjust the air flow in the closed position OFF The fire due to lack of oxygen will stop WARNING DO stop the fire with water There is a danger of crack or chink of the cast iron N Kap 20 INSTALLATION INSTRUCTIONS In case of fire use a fire distinguisher N 21 MAINTENANCE AND SERVICE Maintenance and service For long term economic and safe operation of the device the maintenance instructions provided in this manual should be faithfully performed Thorough inspection and maintenance of the device should be held annually before the start of the season autumn gt All cleaning maintenance work should be performed with the device stopped and the ash cleaned gt Maintenance should be performed by qualified individuals Except programmed
31. supply of the spare parts Ceramic crystal cleaning To clean the ceramic glass you should open the door to the side Use the key provided for the side opening of the door A n cleaning of the crystal is performed when the device is stopped Do not use materials that can scratch the glass engraving can be converted into crack The crystals that KAMINI is using are ceramic with 4mm thickness with very high resistance to thermal shock 800 C and high elasticity But it can be broken by a strong hit MAINTENANCE AND SERVICE Frequency Action Description When ashes Disposal WARNING Risk of Fire Ashes could reach the of ashes contain hot members bottom of the grate e Place ashes in a metal container with cap e The closed container should be placed on a non combustible floor or on the ground well away from all combustible materials pending final disposal e If the ashes are disposed at public buckets they should be retained in the closed container until all members have thoroughly cooled Twice a year Chimney WARNING Risk of Fire A chimney fire Inspection can permanently damage your chimney Cleaning system and nearby structures The action should be performed by a chimney sweep e Remove the termination cap by removing the screws e Inspect clean the interior of the chimney e Replace the termination cap After each Inspect Inspect the grate and replace if ash removal Grate e D
32. t the combustion air move the metal handle at the bottom of the device inside out The air enters into the combustion chamber from the grate which apart from the collection of ashes it has the role to enter the air beneath wood fuel Quantity of air reaches the back wall of the chamber and passes through the specially designed holes on the top of the chamber in order the secondary gas combustion is performed and not be released carbon monoxide to the atmosphere Damper The device has an automatic system for the opening closing of the damper which is performed with the opening closing up and down of the door Combustion maintenance During the night the chamber has the capability to sustain in a minimum level the combustion In order this can happen the following should be done gt Place large wood in a horizontal position gt Adjust the combustion air inlet at the closed position You can open the ventilator at low volume throughout the combustion maintenance the door has to be closed N 19 INSTALLATION INSTRUCTIONS use of the device causes more tar accumulation in the chimney and at the ceramic glass demanding a more frequent cleaning Use with door open The device operates with the door open In this case it loses its energy properties and the combustion is done with the traditional way with high wood consumption and low efficiency Il For safety reasons the manufacturer recommend
33. tion to the device and ceramic glass with tobacco and tar residues and fast blockage of the chimney The wood that is recommended is beech oak oak Avoid resinous wood like pine fir and soft resin wood such as poplar willow because they burn quickly releasing soot resulting fast blockage to the chimney gt Prefer wood with high consistency and weight to ensure constant and intense flame AM WARNING Risk of Fire DO NOT burn wet or green wood AN WARNING Fire Risk DO NOT store wood In front of the fireplace In space required for loading or ash removal The use of wood fuel that cause small explosions is forbidden There is risk of ceramic glass breakage and injury N 14 INSTALLATION INSTRUCTIONS A Burning of painted wood chipboard paper plastics is forbidden There is risk of damaging the chimney and environmental pollution The use of any liquid fuel is forbidden In addition gt Do not place the wood on the walls and the ceramic glass of the device gt Do not stack much wood place it in a way that it gets air and thereby proper combustion is ensured Starting a fire WARNING Risk of Fire Keep combustible materials gasoline and other combustible vapors and liquids away from the fireplace store combustible materials close to the fireplace use gasoline liquid fuels kerosene or similar liquids to start a fire or during the fireplace
34. vap perai Trapo ca cuupopquyvovrai TIC which this declaration refers are in conformity with the amamos tns Aopikwv Karaokeuwyv requirements of Construction products Directive 89 106 EOK kai Eupwrraik EAOT EN 13229 89 106 EEC and the European Standard 13229 ONAWVW Specifically declare that 1 TZAKIWV 1 The construction materials of the fireplaces are Aayapiva EAaong EN 10023 2 2004 Hot tolled plate EN 10023 2 2004 EN 10051 2010 EN 10051 2010 Hematite pig iron yuaA dIOYKWOEWG Low expansion glass ceramics 2 OUOKEUWV TTEPIEXEI GAAEG 2 No part of the appliances contains asbestos or other erri Aa eig harmful substances 3 m 3 cadmium was used when welding assembling parts ruv OUOKEUWV of the appliances together 4 Oi OUOKEUES Trou 4 The appliances are separately offered with suitable size KaTtvoowArva KATAAANAOU Trou and shape flue coupling allowing air tight coupling between
Download Pdf Manuals
Related Search