TF-T6211HDPVR
Contents
1. Detailed information Toggle EPG Mode Previous Day Next Day Intelligent Record Reservation Preselect Record Cancel D Record Record by Timer Cance BEN Information Press the button to display the electronic programme guide Select a programme you want to record with the navigation but tons To make a timer event without recording press the button the letter P is displayed To make a timer event with recording press it once more or alternatively press the button then the letter R is displayed Pressing the button once more will cancel the timer 7 2 File archive 33 7 1 4 Recording a time shifted programme While watching a programme with time shift you can record it by per forming the following steps NOTE The whole timeshift buffer is recorded as one single file on the hard drive 1 Press the button to display the progress bar 2 Hold down the lt q button to move back in timeshift 3 Press the button to start recording When you get prompted to save the timeshift programme select YES at the same time a new live recording will begin from the end of your timeshift file on the same channel 4 If you wish to stop the live recording press the button on the remote See 5 4 for detailed description about the time shift feature 7 2 File archive 7 21 To delete When a programme is recorded it is stored as a file on the hard drive of the digital receiver You2. P audio connectors Plug one end of the cable into the AUDIO C L white and AUDIO R red sockets on the digital receiver Co Co and plug the other ends into the matching sockets on your Lum U gt television or audio video receiver UL 1 To enjoy Dolby Digital audio your television or audio video receiver must be able to decode Dolby Digital audio f and you need to obtain a S PDIF cable Se L LNA Plug one end of the cable into the S PDIF socket on the d E aN digital receiver and plug the other end into the matching socket on your audio video receiver 24 3 Connecting to an external device The digital receiver can also present or record the video from an exter nal device such as a DVD player through the Composite connector Al You need a Composite cable RCA cable to use the Com posite connector Plug one end of the cable into the VIDEO G q am yellow AUDIO L white and AUDIO R red sockets on ow x 5 S the digital receiver and plug the other end into the match gt ing socket on your video recorder or suchlike 2 5 Switching ON for the first time 11 25 Switching ON for the first time Now that you have your digital receiver connected you should plug it into a wall socket Ensure that your television set is turned on and on the correct video channel so that you will be able to see the display from the digital receiver Press the button on the top left corner on the remot
3. The front display shows the currently viewed service s number and name If any service s name is too long to fit the width of the ser vice name column you can get it to scroll by setting the Main Display Scrolling option to anything other than Disable With the choice of Un limited it will be repeatedly scrolled with the choice of Once it will be scrolled only once If you want to have the current time displayed instead of the service number set the Sub Display Content option to Time You can also adjust the brightness of the front display in active mode and standby mode by setting the Brightness in Operation Mode option and the Brightness in Standby Mode option to any as you like 4 8 Options for Photo Album You can change a time interval and effect of slideshow in the photo album For the photo album feature see 8 3 To change the time interval of slideshow select the Settings gt Miscel laneous menu and then set the Slideshow Time Interval option as you desire Its available range is 3 to 10 seconds 21 Chapter 5 Every Day Use 5 1 Volume control Use the or buttons to alter the volume to a comfortable level 5 2 Watching television To change services press the or button In addition you can switch to your desired service by entering its service number with the numeric buttons 5 2 1 The services list TV Services 1 ABC News 24 2 ABC1 To view the services list press the OK but
4. fe ike 54 Troubleshooting No power No front display Make sure the main switch on the back of the Topfield unit is switched to ON Properly insert the power plug into the power socket Ifthe power outlet is controlled by a switch make sure the wall switch is ON Remove the power plug from the wall and wait 10 seconds then plug back in Plug another appliance into the outlet if the other appliance doesn t work then have a qualified electrician repair the outlet Plug the Topfield unit power code into a different outlet Ihave connected my Topfield unit to the TV but getting no picture The connection must be via an AV output out of the Topfield unit to an AV input of the TV Check that you are in the correct AV setting on the TV For ex ample if you connected the Topfield unit to AV2 on the TV make sure you set your TV with the TV remote to AV2 before the Top field unit can be used Press the ve button on the remote and set to the correct resolu tion 576i 576p 720p 1080i 1080p You may need to press the button multiple times to cycle through all the different formats All formats will be displayed on the front screen of the Topfield unit When the Service Scan is finished I get zero channels Check that there is a signal coming from the antenna by con necting it directly to the TV or another device e You must have signal strength between 50 90 Indoor antenn
5. ton On the services list you can see the 3 ABC2 Options service information as follows Show Provider 4 gt Off S Rename Service number and name Lock a Unlocked o Multiplex information Delete Add to FAV DVBT Ch 6 177 500 MHz Favorite List O Option To select a desired service put the highlight bar on its entry with the a m lt lt Jg 5 lt 7 OD 22 Every Day Use A or W button and press the OK button then the selected service will be presented Pressing the 1 Or p button skips over 10 entries up or down Entering a service number with the numeric buttons puts the highlight bar on its entry You can switch between the television services list and the radio ser vices list by pressing the Ca button 5 2 2 The favourite service lists 0021 ABC1 0022 ABC2 0023 ABC3 bar on a desired favourite group list and 0024 ABC News 24 You can select a service on a favourite list as well as on the services list Fav List To display the favourite lists press the button at the services list screen For the services list see 5 2 1 To select a favourite list put the highlight press the button then the selected favourite group s services will be listed All Services Z Option As to how to edit the favourite lists refer to 6 1 To select a favourite service put the highlight bar on a desired service and press the button then it will be displayed To sele
6. your personal identification number 7 2 4 To rename a recording To change a recording s name take the following steps 1 Put the highlight bar on a desired recording 2 Press the F1 button to display additional options 3 Select the Rename option and the on screen keyboard appears Change the name and save it 7 2 5 To make a new folder To make a new folder press the button then a new folder named GROUP is created You can change its name in the same manner as renaming a recording See above 7 2 6 To move a recording to another folder To move a recording to another folder put the highlight bar on a de sired recording and press the F3 button If an external hard drive is connected to the digital receiver you get asked to select between the built in and external hard drive Select Internal then the folders are listed Once you choose a folder the recording is moved to it 7 3 Playing back a recording When a programme is recorded its additional contents such as audio track or subtitle track are also recorded together So you can enjoy them while playing back a recording 7 3 Playing back a recording 35 The instructions on how to play a recording are as follows 1 Select the PVR gt Recorded Program menu or alternatively press the button to display the list of recorded programmes 2 Put the highlight bar on a desired recording and press the button then an option box pops up 3 To play fro
7. 1 Make an account on a web site providing DDNS service which should be supported by your router 2 Configure your router with the account so that it can commu nicate with the web site 8 2 Network setup 41 Whenever a new dynamic IP address is assigned to the router it will inform the DDNS service provider of the new IP address This makes it possible that you access the router with a domain name at any time 8 2 Network setup 8 21 Fora wired connection 1 Connect your Ethernet cable from your router to the Topfield recorder 2 Press Installation gt Network Setting gt IP Setting 3 Select Wired Wireless LAN Then select Wired as the preferred connection It is recommended to use a dynamic IP address by the router therefore select DHCP as the connection type However if a static connection is set then please refer to your router for an IP address Subnet Mask Gateway Primary DNS Secondary DNS Once a connection has been set scroll down to activate profile and press the OK button on the remote A successful connection will populate all the IP settings and the Level Quality bars on the TV screen will show a high percent age level 8 2 2 Fora wireless connection 1 Connect the USB wireless dongle to the USB port on the PVR 2 Press Installation gt Network Setting gt IP Setting 3 Select Wired Wireless LAN Then select Wireless as the pre ferred connection Select AP list and press
8. 4 steps 1 2 1 4 1 8 and 1 16 times To resume normal speed press the gt button J D Q e 2 2 ke o Q 0 9 lt o g O x 36 Recording and Playback 7 3 3 To play in fast motion To watch in fast motion during a playback press the C button If you press it repeatedly the playback speed changes To resume normal speed press the button You can play not only forward but also backward in fast motion To play backward press the button If you press it repeatedly the playback speed changes To resume normal speed press the but ton You can change the playback speed in 4 steps 4x 16x 64x and 128x or in 7 steps 2x 4x 8x 16x 32x 64x and 128x See 4 5 7 3 4 To make a bookmark 93 5 2Min You can mark favourite parts of a record ing by creating bookmarks and then jump to them in sequence Bookmarks are stored with the recording so that you can use them again afterwards To make book marks take the following steps during playback 1 Press the button to display the progress bar 2 To add a bookmark press the F2 button at a desired scene then you will see a small pointer appear above the progress bar like in the picture above 3 To jump forward to the next bookmark press the F3 button 7 4 Copying a recorded file You can copy a recorded file by performing the following steps 1 Start playback of a recorded file you want 2 Move to the scene
9. OK A list of available networks will be shown then select your personal network Once network is selected choose the security mode WPA WPA2 WEP Select your WPA WPA2 WEP al gorithm according to your router setting Entre the pre shared key which is also known as your network password Network password must be exactly the same as your router setting including Upper Lower case and any numbers used gt Q O B 7 e 2 ike o Z B pt x 42 Accessing via Network 8 A successful connection will populate all the IP settings and the Level Quality bars on the TV screen will show a high percent age level If the fields are not populated check the password and any security settings NOTE After selecting activate please allow up to 5 seconds for fields to pop ulate Most routers can be accessed via a web browser Refer to your Router user guide on how to access router setting 43 8 Accessing via Network 44 Firmware Update Chapter 9 Firmware Update The digital receiver has a stable and convenient firmware to use You can get the latest firmware and the firmware update tool which runs on most versions of Windows from http www i topfield com 9 1 From a memory stick If you have a USB memory stick you can update the firmware from it by taking the following steps 1 2 3 Download a new firmware from the Topfield website Copy the firmware file to your memory
10. an external hard drive you must connect the external hard drive to the USB port of the digital receiver You cannot play back the recordings with a regular MPEG player on your computer because they are formatted differently from the standard MPEG for mat Visit http uww kmplayer com where you can find an MPEG player able to play them back CAUTION Do not disconnect the external hard drive while recording or playing back It may cause damage to recorded programmes You should disconnect the external hard drive in standby mode only Avoid transferring files while the unit is set to record This recorder can record four channels simultaneously however this is controlled by the channel frequency Each channel has other programmes under the one frequency E g Channel Nine has 9 9HD GO GEM Chan nel ABC has ABC News 24 ABC1 ABC2 ABC3 etc This recorder can record four programmes locked on two channel frequencies simu taneously E g 10 TEN Digital plus 11 One HD and 90 GEM plus 99 Go While recording the above combination of programmes you can also playback a pre recorded show 7 1 Recording a programme 29 7 1 Recording a programme Once a recording gets started a symbol like the left figure will be displayed at the top right of the screen for a few seconds When you are watching a different service from the service being recorded you will see a number on the centre of the symbol this indi cates the order that the
11. can select a recording to play back from the recorded programme list Select the PVR gt Recorded Program menu or alternatively press the button to display the recorded programme list The file informa tion is comprised of the following elements file number file name recording time running time file size and so on You can play move delete rename and lock a recording file You can also sort the recording files by file name running time or file size In addition you can make a new folder a recording To delete a recording put the highlight bar on it and press the button then you get asked for confirmation With the choice of Yes it will be deleted 7 2 2 To sort recordings To sort the recordings take the following steps 1 Press the F1 button to display additional options N ZU Q e a 2 o a at b lt EP g O lt 34 Recording and Playback 2 Set the Sorting option to Alphabetic Time or Size as you want 3 Press the button 4 They will be sorted by the specified option 7 2 3 To lock a recording To lock a recording so that other persons cannot play or delete it take the following steps 1 Put the highlight bar on a desired recording 2 Press the F1 button to display additional options 3 Set the Lock option to Locked 4 Press the button 5 The lock symbol Qm is displayed on it If you select a locked recording to play it back you will be asked for
12. chosen services Edit Favorite List May 5 10 11 Select Installation gt Edit Favorite List Fav List Movie Music Sports New lt az a menu You should see a screen like the left name name name mans figure There are three columns Hit name Ht name en wae Group name left fi name S name Favourites list centre Esc name Services list right 9P name name fft name name Detailed channel info Moves to Another List Changes name Delete Previous Menu The services list contains all available services whereas the favourites list contains only chosen services that have been added to the high lighted group As you move the highlight bar up or down on the group list favourite services belonging to the highlighted group get shown in the favourites list NOTE To load guide go to the specific channel press the button then the guide will populate Do this to every single channel upon start ing up PVR 6 1 Editing the favourite lists 27 You can add up to 30 groups To add a new group select the NEW item in the group list then the on screen keyboard appears To rename a group put the highlight bar on the group entry you want and press the button then the on screen keyboard likewise ap pears To delete a group put the highlight bar on the group entry you want and press the button then a message box appears asking you for confirmation With the choice of Yes it will be del
13. for indoor use only Place the digital receiver on a firm and level surface Do not lay any objects such as magazines on this unit Do not overload power outlets Doing so may result in a risk of fire or electrical shock Never open this unit s casing under any circumstances or the warranty will be void Unplug this unit during lightning storms or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the unit has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the unit the unit became wet from rain or moisture does not operate normally or has been dropped Batteries including those which contain no heavy metals may not be disposed with other household wastes Please dispose of used batteries in an environmentally sound manner Find out the legal regulations which apply in your area iii About this User Reference Thank you for purchasing our digital receiver Please read this User Reference carefully before you use the digital receiver and keep it handy for future reference This User Reference covers the model TF T6211HDPVR Illustrations pictured in this reference may not be exactly the same as the actual product The screenshots used in this reference may not be exactly the same as those you see on the actual on screen displays Designs and specifications of the digital receiver and othe
14. gt Recording menu To enable the time shift function you should set the Time Shifting op tion to anything other than Disable The available range for this option is 30 minutes to 5 hours You will have the latest of the current pro gramme as long as the duration specified at this option You can record a programme into both an external and the built in hard drive If you want to record a programme into an external hard drive set Recording Drive option to External otherwise set this option to Internal If you set the Time Shift Storage option to Enable the 4 5 Options for playback 19 time shifted programme will be saved in the TimeShift folder of the hard drive You can set the duration of the timer recording Set the Timer Record ing Duration option as you desire Its available range is 10 minutes to 3 hours Time padding is the feature of adding extra recording time to the be ginning or end of a programme so that you do not miss any part of the programme Set the Timer Record Padding option as you desire You can adjust the duration of the instant recording Set the Instant Recording Duration option as you desire Its available range is 30 min utes to 5 hours A v OD OD 2 O 1 wn 2 7 4 5 Options for playback To set the options for playback select the Settings gt Playback menu If you want to play back a recorded file from beginning set Starting Position option to Beginning T
15. into the Entertainment gt Media Player list 01 movie001 the internal storage of the unit Media 02 movi do2 The transcoded file name will start with Media Player May 5 10 11 03 movie003 Ein Transcode and the original file name 350 MB 3 Hour 5 Min 30 Sec 03 05 2013 08 40 100 2 GB Free 463 7 GB Select New Folder MovelCopy Delete Options Kl Make Regcode Play Device List ET Previous D Next 38 Recording and Playback 7 6 Formatting the hard disk If a new hard disk is installed it must be formatted before using Be cause the Topfield unit does not recognize unformatted hard disk You can delete all contents stored in the hard disk by formatting it Select the Installation gt System Recovery gt Format Hard Disk menu and then select the hard drive you want to format To format the built in hard drive select the option to Internal otherwise to format the external hard drive which is connected to the digital receiver select the option to External With pressing the button you get asked for confirmation Formatting will start with the choice of Yes Select the Installation gt System Recovery gt Format Hard Disk menu With pressing the button you get asked for con firmation Formatting will start with the choice of Yes NOTE The hard drive on the digital receiver will be formatted in the JFS file system 39 Chapter 8 Accessing
16. no programme classification G restricts to G or above G rated programmes are suitable for all audiences PG restricts to PG or above rated programmes PG stands for Parental Guidance the content of which is mild M restricts to M or above rated programmes M stands for Mature the content of which is moderate in impact MA restricts to MA or above rated programmes MA stands for Ma ture Audience the content of which is strong R restricts to R rated programmes R stands for Restricted to adults aged 18 years or over the content of which is very strong AV restricts to AV rated programmes AV stands for Adult Viewing the content of which is deep hardcore NOTE If a programme has no rating information your censorship setting will not take effect If anyone is trying to watch a programme that is of or above the censor ship setting the person has to enter the personal identification number to override To change the number select the Change PIN Code menu then a box pops up asking a new PIN Enter a desired number twice for confirmation You can also restrict uses of some menus Selecting the Access Control menu displays a list of menus that you can lock If the Time item is set to Locked you have to enter the PIN when accessing the Time menu If you enter a wrong number you cannot use the menu To release a locked item set it to Unlocked 44 Options for recording To set the options for recording select the Settings
17. not support high definition you cannot enjoy high definition quality picture Set the Video Format option as you desire If you set this option to 576P the digital receiver will present even high definition pro grammes in resolution of 576 On the contrary if you set it to 10801 the digital receiver will present even standard definition programmes in resolution of 1080 While watching television you can change the resolution with the vr button Whenever you press it the video resolution is changed in turn NOTE You can enjoy only standard definition video with the following video outputs Composite video output VIDEO 4 1 Video and audio settings 15 4 12 Television aspect ratio If you have a wide screen television set the TV Aspect Ratio option to 16 9 A U h 2 O wn n 2 7 You can enjoy both wide screen programmes and normal screen pro grammes with your wide screen television as the above figures show To watch normal screen programmes in full screen like the left figure set the Display Format option to Full Normal screen pictures then will be inflated to fit to the width of the wide screen Otherwise to watch them in the original ratio like the right figure set it to Center If you have a normal screen television set the TV Aspect Ratio option to 4 3 You cannot fully enjoy wide screen programmes with your normal screen television as the above
18. output socket for the television set yellow AUDIO L R Stereo audio output socket for television or audio receiver white red LAN Local area network port DC IN Power jack Table 2 3 Connectors specifications VIDEO Composite video CVBS output AUDIO Left amp right audio output S PDIF Dolby Digital audio output HDMI High definition video output Left amp right audio output USB 2 0 Host 5 V DC 500 mA LAN 10 100 Ethernet 8 Setup 2 4 Connecting up your digital receiver There are several ways to set up the digital receiver Set up the digital receiver suitably to your television and other devices If you have any problem with your setup or need help contact your dealer WARNING Connect any components before plugging the power cord into the wall outlet Always turn off the product TV and other components before you connect or disconnect any cables NOTE If you encounter any problems setting up your product please con tact your local retailer 2 4 1 Connecting to the antenna Whatever sort of connection you have between the digital receiver and the television you need to connect the digital 3 receiver to the antenna so that it can receive digital televi an T sion broadcasts Connect the antenna cable to the ANT IN amp CSS connector If you have another digital receiver you may link it from the RF LOOP OUT connector NOTE RF LOOP OUT may also be linked to your television V
19. recording has started When you record two different channels from two different stations what you are actually doing is locking each tuner to two separate station bandwidths For example if you record channel 7TWO and channel 9 Digital you have locked the first tuner into all the channels from 7 which includes 7 Digital 7 Digital 1 7TWO and 7Mate While on the second tuner you have locked in all the channels from 9 which includes 9 Digital Gem and Go With this in mind while the above two channels eg 7TWO and 9 Digital are being recorded you can watch a third channel which can be only one of the following 7 Digital 7 Digital 1 7Mate Gem or Go The same can be said for recording for four channels eg 7TWO 7Mate 9 Digital and Go You can watch an additional channel which can be only one of the following 7 Digital 7 Digital 1 or Gem CAUTION Do not move the digital receiver nor pull out the power plug while it is running It may cause damage to recorded programmes Topfield is not responsible for damages inflicted on files that are stored on the hard drive N J D Q e EH 2 5 Qa E 2 lt EP o O C 7 1 1 Instant recording To instantly record a programme you are watching at present press the button If you want to record the video from the external device linked to the Composite video input switch the video channel to your desired one by pressing the 3 button Pressing
20. via Network NOTE The following section describes complex functions that should only be used by owners with advanced computer knowledge This digital receiver provides a feature of FTP service by which through the network you can transfer recording files to your com puter Here you need a router which will connect the digital receiver to your computer or to the Internet If you want to have a wireless connection you need a wireless router To use the network features of the digital receiver you should take the following steps 1 Configuring your router for the digital receiver 2 Configuring the network settings on the digital receiver 3 Accessing the FTP Server of the digital receiver NOTE The FTP server of the digital receiver doesn t work in standby mode So it must be powered up at all times if you wish to use the web service at any time gt 7 O 1 7 ME 2 Q S B fe x 40 Accessing via Network 8 1 Configuring the router In this section the setup program of WRT54G which is a router man ufactured by Linksys will be referred to as an example of how to con figure the router for network access NOTE For detailed description about how to set up the router refer to the manual of your router 8 11 To access within the local area network 8 1 2 To access Once your router is powered up a local area network gets created whether or not it is connected to the Inter
21. CR or DVD recorder to loop an analogue signal 2 4 2 Connecting to your television set For all the following connections of the digital receiver we recommend you to use the first connector to get the best picture quality If your tele vision does not have a matching connector then use the next connector in the following order for a better picture quality 1 HDMI connector HDMI 2 Composite connector VIDEO You should configure audio and video settings after connecting up the digital receiver See 84 1 for a detailed description 2 4 Connecting up your digital receiver 9 To use the HDMI output If you have a high definition television set you should use an HDMI cable for best results Plug one end of the cable into the HDMI socket on the digital receiver and plug the A qu um XE other end into the matching socket on your television In this case you do not have to make audio connection because it can output stereo audio or digital audio as well To use the Composite video output You need to obtain a Composite video cable RCA cable fe to use the Composite video output Plug one end of the cable into the VIDEO yellow socket on the digital receiver and plug the other end into the matching socket on your television NOTE You cannot view high definition video by means of the Composite video output 10 Setup To make the audio connection You need to obtain an audio cable RCA cable to link the
22. O 1 I OD o O 2 The digital receiver maintains the following data Services list Favourite list Timer list Preference settings You can reset all data of the digital receiver Select the Installation gt System Recovery gt Factory Setting menu and then you get asked for confirmation With the choice of Yes the services list favourite list and timer list will all be cleared and preference options will be reset to the manufacturer s factory settings NOTE A factory reset will not delete any recorded programmes However you have to search services again after a factory reset 3 3 Resetservice list If you only want to clear the service list select Installation gt System Recovery gt Reset Service List then you get asked for confirmation With the choice of Yes the services list will be cleared After this you have to do service search again 14 Preference Settings Chapter 4 Preference Settings 41 Video and audio settings You have to configure the video and audio settings appropriately for your television set and other devices Select the Settings gt A V Output menu You should see a screen like the left figure 4 1 1 High definition television The digital receiver supports various video resolutions from 576 to 1080 In general a resolution of 720 or more is considered high defini tion The higher the resolution is the better the quality is However if your television set does
23. Only if the service you are currently watching provides a Dolby Dig ital audio track you can enjoy Dolby Digital sound 4 2 Local time setting You should set your local time for timer events Select the Settings gt Time menu You can set the clock manually or by Greenwich Mean Time GMT To use Greenwich Mean Time take the following steps 1 Set the Mode to Auto then the Time Offset will be enabled 2 Set the Time Offset option to the time difference between your time zone and GMT referring to Table 4 1 3 Make sure the correct time is displayed on the Local Time area To set the local time manually set Mode to Manual and enter the cor rect time to the Local Time option with the numeric buttons The time format is day month year 24 hour minute 4 3 Parental control 17 Table 4 1 Time offset table Time offset City A GMT 12 00 Eniwetok Kwajalein v GMT 11 00 Midway Island Samoa GMT 10 00 Hawaii o GMT 09 00 Alaska GMT 08 00 Pacific Time US Canada D GMT 07 00 Mountain Time US Canada GMT 06 00 Central Time US Canada Mexico City D GMT 05 00 Eastern Time US Canada Bogota Lima dp GMT 04 00 Atlantic Time Canada La Paz Dominican Republic o GMT 03 30 Newfoundland GMT 03 00 Brazil Georgetown Buenos Aires amp GMT 02 00 Mid Atlantic 7 GMT 01 00 Azores Cape Verde Islands GMT London Lisbon Casablanca GMT 1 00 Paris Brussels Copenhagen Ma
24. TOPFIELD TF T6211HDPVR User Reference High Definition Digital Terrestrial SMART Receiver Android OS Featured Personal Video Recorder Default PIN 0000 TOPFIELD SMART PVR Digital Video Broadcasting ii CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL A The lightning flash with arrowhead symbol in an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to a person A The exclamation point in an equilateral triangle is intended to alert the user to the presence of important operation and maintenance instructions in the literature accompanying the product Precautions Read keep and follow these instructions Clean with a dry cloth only Do not block any of the ventilation openings Do not install near any heat sources or in direct sunlight as this will impair cooling Do not operate this product near water Do not place any of the objects filled with liquids such as vases on this unit Do not try to change the plug or defeat its safety purpose If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet This product is designed
25. a is not recommended as the signal is not enough to display channels when a service is scanned Getting pixilated images on the my Television Checkthe plug on the Topfield unit and on the wall making sure that it s a tight connection Check that there is a signal coming from the antenna by con necting it directly to the TV or another device e You must have signal strength between 5076 9096 55 Can not receive or adjust sound through the Topfield unit Adjust volume using the Or on the Topfield remote Use the TV remote to adjust the sound to approx 50 then use the Topfield remote to adjust volume e Check the connection between the TV and the Topfield product Make sure you are in the correct AV on the TV Can not rewind live Television Make sure that Timeshift is enabled Settings gt Recording Check that Hard Disc Drive is working by playing back a previ ous recorded program The Free to Air Guide is blank Move to every channel and give the recorder a few minutes to populate the guide for each channel Factory reset and re scan all the services in the Installation part of the MENU Check the broadcaster sends a Free to Air guide for that service Can not set the correct aspect ratio Change the aspect ratio on the Topfield unit by pressing the button on the Topfield remote 16 9 4 3 Check the aspect ratio on your TV Refer to the user guide of your TV for information about this proc
26. apply in your area 12 Service Search Chapter 3 Service Search After connecting up the digital receiver you will need to perform a service search NOTE If there is no service stored you will be not able to access all menus A service is another name for a CHANNEL 3 1 Searching for broadcasting services Searching mr it To perform service search select the Instal lation gt Searching menu You should see Search Mode Auto a screen like the left figure Channel PID You should set the Search Mode option to Antenna Supply 5V Off Auto for the first time after connecting up the digital receiver Eselect MEW Previous Menu Ext B Heip Extended Signal You may choose to only search for the services of a specific transponder since more than one service are provided via each transponder Set the Search Mode option to Manual then select your desired transponder at the Channel option The number ranges from 6 to 12 in VHF and 28 to 69 in UHF 3 2 Reset to factory settings 13 To start service search move down to the Start Search item and press the button The digital receiver will start to search for services It is common for no channels to be found until quite late in the process When the scan is complete you will see a message telling you how many services have been found Press the button to save the list 3 2 Reset to factory settings ie ie S lt
27. ast In order to use the time shift feature set the Time Shifting option to desired duration of time Then the digital receiver will archive the programme as much time as you set in the option See 4 4 The time shift will be reset each time you change to another service With the time shift the following operations are possible To go back in time hold down the F3 button to go forward hold down the F4 button The progress bar is displayed mo mentarily with a preview window You can navigate using the progress bar refer to 7 3 1 You can jump backward and forward by pressing the F4 and buttons You can change the jump time at the Jump Time Interval option See 4 5 You can change playback speed See 7 3 2 for slow motion For fast motion see 7 3 3 To check your current position in time shift press the i J but ton The time difference compared to live programme is dis played momentarily in top right corner of the screen A value of 02 00 means two minutes behind the live programme To make a recording of the time shifted programme see 87 1 4 To end time shift press the button The live programme will be displayed a m lt OD lt Jg EY lt 7 p 26 Organising Services Chapter 6 Organising Services 6 1 Editing the favourite lists You can make your own favourite service lists In fact you can define multiple favourite service lists each being a group of
28. ate Broadcasting time Title Detailed information Toggle EPG Mode Previous Day Next Day Intelligent Record Reservation Preseleci Record Cancel D Record Record by Timer Cancel H Information To see detailed information of a desired programme put the highlight bar on the programme with the o P button and press the Li but ton To switch to another service press the A or W button You can travel over previous days with the F2 button and can travel over next days with the F3 button To see the programme guide for radio broadcasts press the 6 button To switch it back press the a button again Pressing the F1 button will rearrange the form swapping the columns and rows To switch it back press the F1 button again You can make a timer recording on the electronic programme guide See 7 1 3 for detailed description 5 4 Using time shift 25 5 4 Using time shift You can pause and resume a live television programme and even rewind and replay it When you are watching a programme and you miss something you can rewind and replay it Or when your attention is needed elsewhere you can pause a live TV and resume a short time later without losing any of the programme When you do this you are no longer watching the live programme instead you are watching a delayed presentation This is called time shifted television You can skip commercials until you catch up to the live broadc
29. ccess within the local area network 8 1 2 To access over the Internet llle 82 Networksetup 8 2 1 For a wired connection 2l 8 2 2 For a wireless connection ooo e e ee 9 Firmware Update 9 1 From a memory stick A Troubleshooting 39 40 40 40 41 41 41 44 45 Chapter 1 Introduction The TF T6211 digital receiver is fully compliant with the international Digital Video Broadcasting DVB standard and thus is able to receive digital broadcasts of that standard For its operation you need an an tenna which must be installed appropriately NOTE The frequency in digital broadcasting is usually called transponder or multiplex To reduce confusion in this manual the word service is preferably used than channel as a term to indicate one television or radio broadcast 1 1 Features This digital receiver has the following features Can store up to 2 000 television and radio services Can create lists of your favourite services You can record programmes using a built in hard drive with large storage capacity Time shift is a special technical feature available on this digital receiver You can pause a programme you are watching and resume it again at a later time Then you can quickly go to any part of the current programme by fast forward or rewind search If you have an external hard drive connected to the digital re ceiver via USB you can record programmes into it Encode rec
30. ct another group press the 2 button After you have selected a favourite service if you then switch to an other service using the Aor W button it will be also another favourite service of the selected group The digital receiver will remind you what group you have selected by displaying its name at the top right of the screen whenever you switch services To return to the services list press the button Besides that you can add or delete a favourite group or service To add a new favorite group press the button to display additional options and then select Add New Favorite Group To add the service you are currently watching into a favourite group press the F1 button to display addi tional options and then select Add this service item To remove the currently highlighted favourite grop or service select Delete item in the additional option box then you get asked for con firmation with the choice of Yes it will be removed 5 2 Watching television 23 5 23 Viewing programme information Pressing the i button displays the information box on which you can see all of the following Service number and name Transponder information Signal level and quality Programme name Programme classification sign Programme summary Broadcasting time Current time a m lt OD lt Jg EY lt 7 OD In addition you might see the following symbols e Subtitle symbol if subt
31. d time at which the record ing will be started The time format is hour minute i D OD Q e 2 ke o Q 0 9 lt o g O x 32 Recording and Playback 6 Set the Duration option to a desired time in which the recording will be finished Pressing the button on the File Name option displays the on screen keyboard with which you can specify a file name for the timer recording If you do not specify anything it will be named after the service name Toseta recording reservation with the above settings select the OK item otherwise it will not be saved and will not occur You can also edit or delete timer events in the timer list To edit a timer entry put the highlight bar on the entry you want and press but ton then appears a box in which you can change its settings in the same manner as making a new one To delete a timer event put the highlight bar on the entry you want to remove and press the F2 button then you get asked for confirmation With the choice of Yes it will be deleted To delete all timer event press the F3 button You can sort timer events by time with the F4 button 7 1 3 Scheduling recordings using the programme guide Program Guide If the electronic programme guide is prop May 5 10 11 erly provided you can make timer events 02 00 on it The instructions on how to make timer recordings using the electronic pro gramme guide are as follows
32. drid GMT 4 2 00 South Africa Kaliningrad GMT 4 3 00 Baghdad Riyadh Moscow St Petersburg GMT 4 3 30 Tehran GMT 4 4 00 Abu Dhabi Muscat Baku Tbilisi GMT 4 4 30 Kabul GMT 4 5 00 Ekaterinburg Islamabad Karachi Tashkent GMT 4 5 30 Bombay Calcutta Madras New Delhi GMT 4 6 00 Almaty Dhaka Colombo GMT 7 00 Bangkok Hanoi Jakarta GMT 8 00 Beijing Perth Singapore Hong Kong GMT 4 9 00 Tokyo Seoul Osaka Sapporo Yakutsk GMT 4 9 30 Adelaide Darwin GMT 4 10 00 Eastern Australia Guam Vladivostok GMT 11 00 Magadan Solomon Islands New Caledonia GMT 4 12 00 Fiji Auckland Wellington Kamchatka 4 3 Parental control In general television programmes are classified according to the level of violence nudity and language of their content When you are watching a programme you can check its programme classification on the information box For the information box see 85 2 3 You can prevent your children from watching specific programmes by specify ing a maximum permissible level Select the Settings gt Parental Con trol menu You will be asked for your Personal Identification Number PIN The number is initially set to 0000 as default To block programmes with undesired content for family viewing set the Censorship option to your desired level among the following 18 Preference Settings No block restricts no prorgramme Total block restricts every programme even those with
33. e control Ina little time you may see a picture displaying a menu If you do not see a picture try pressing the button on the remote control If after several tries you still get no picture check that the television is set to the correct input If the picture is good you can skip to 3 1 to search for available television and radio services Otherwise you may need to temporarily connect the Composite video connector VIDEO to your television set so that you can see the menu in order to configure the video settings CAUTION If the digital receiver no longer reacts properly to the remote control commands the batteries may be flat Be sure to replace only with 1 5V AAA size batteries and observe the following precautions e Do not mix different types of batteries or new and old batter ies Do not use rechargeable batteries Do not recharge the old batteries In order to avoid any risk of explosion observe the polarities indicated inside the battery compartment Do not subject to excessive heat such as the sun and fire If you are not using the remote control for a long period of time remove the batteries The manufacturer accepts no lia bility for the damage resulting from leaking batteries Batteries including those which contain no heavy metals may not be disposed with other household wastes Please dis pose of used batteries in an environmentally sound manner Find out the legal regulations which
34. e figure appears Take the following steps Date 1 11 2014 Sat Start Time 07 00 0 0 Duration 30 Min File Name OK Reservation May 5 10 11 Type Service Mode Insert G Delete Delete All Program Guide Edit H Information 1 Set the Record option to On to make a recording If this op tion is set to Off the digital receiver will turn on at the specified time but not record instead you may record with your video recorder or suchlike in this case 2 You may have three sources for recording TV radio the video from the external device linked to the digital receiver s video input Set the Type option to your desired source 3 Set the Service option to the service which provides the pro gramme you want Pressing the button on this option dis plays a services list from which you can select your desired ser vice 4 Setthe Mode option as you desire There are five timer modes One Time means literally One time Every Day means literally Every day Every Weekend means Every Saturday and Sunday Weekly means One day every week Every Weekday means Every Monday to Friday If your favourite programme is broadcast at weekends and you wish to record every episode of the programme set the Mode option to Every Weekend 5 Set the Date option to a desired date on which the digital re ceiver will turn on The date format is day month year day of the week Set the Start Time option to a desire
35. edure Check the broadcast of the program For example some pro grams are only broadcasted in 4 3 Lost part of my show because it went longer then the set time e When setting a Reservation add an extra few minutes to the Du ration to cover for programs going over the predicted time When recording off the Free to Air guide press the e button twice on the Topfield remote and adjust the duration to cover for programs going over the predicted time Adjust the Padding in the Settings gt Recording gt Timer Record Padding Rear Adjust according to personal prefer ence gt D L gt Ej ke 56 Troubleshooting Can not get a network connection Make sure you are using a Router and not a Modem You can only establish a connection by using the Network cable directly to the Topfield unit OR by using a USB wireless dongle You are using a 3rd part USB wireless dongle Your router settings are not set up correctly in the Topfieldunit Check connection of Ethernet cable and USB wireless dongle making sure they are a tight fit in the socket Restart Router and try again Can not connect my external HDD Make sure external HDD is formatted in NTFS then reformat ted to the system when it is connected This will ensure that the hard drive is ready to use and the full capacity is available The HDD must not be more then 1000 GB 1 TB You must make sure that the exter
36. eted You can add a favourite service to a group by taking the following steps 1 Put the highlight bar on a desired group entry in the group list and press the button to select it The highlight bar then moves to the services list 2 To add a service to the selected group put the highlight bar on a desired service entry and press the button The selected service entry gets added to the favourite list Repeat this step to add more entries 3 Press the button and the highlight bar gets moved to the favourite list You can delete a favourite entry with the but ton 4 To select another group press the button again then the highlight bar gets moved to each column Furthermore you can rearrange a group s favourites by moving a favourite entry To move a favourite entry put the highlight bar on the favourite entry you want and press the button Press the 4 P buttons or A W buttons to move it to a desired place and press the button To add radio services press the button then ra dio service entries get listed in the services list To recall the television services list after adding radio services press the button again As to how to use the favourite service lists you organised refer to 85 22 o G Q D o 5 To I S992IAJ9 28 Recording and Playback Chapter 7 Recording and Playback You can record TV programmes into an external hard drive as well as the built in hard drive NOTE To use
37. fferent functions per menu change to mouse mode using l 7 1 navigation buttons 8 66 s starts reverse playback Subsequent presses increase the rewind speed pauses live television or playback of a recorded programme resumes normal playback speed or displays the progress bar for navigation on playback or time shift starts fast forward playback Subsequent presses increase the playback speed jumps back to the beginning of the recording during playback starts slow motion playback Subsequent presses change the playback speed set repeat playback for recorded program playback x X y 3 Ol jumps to the end of the recording during playback Functions of the colour buttons will be guided on the screen Chapter 2 Setup 2 1 Unpacking Before going any further check that you have received the following items with the digital receiver Remote control Two batteries for the remote control AAA 1 5 V One HDMI cable A copy of the User Manual NOTE Accessories may vary according to your local area 2 2 Safety precautions Please read carefully the following safety precautions The mains voltage must range between 90 and 250 volts Check it before plugging the digital receiver to the wall socket For the power consumption of the digital receiver refer to Table 2 1 The wall socket should be near the equipment Do not run an extension lead to the unit T
38. figures show The left figure shows a normal picture displayed in the normal screen To watch wide screen programmes in the shape like the centre figure set the Display Format option to Letter Box Wide screen pictures then will be reduced to fit to the width of the normal screen Otherwise to watch them in the shape like the right figure set it to Center extract Then wide screen pictures will be cut out on the left and right sides equally to fit to the width of the normal screen 16 Preference Settings 4 13 Audio mode Basically there are two audio sources as you can find two audio sockets on the back panel of the digital receiver You can enjoy only one source or both of them in either stereo or mono Set the Sound Mode option as you desire Apart from this setting you can change the sound mode with the button See 5 2 4 for a detailed description The digital receiver can output two types of digital audio signals via the S PDIF output One is an encoded signal and the other is a de coded signal If you have the digital receiver linked to your audio video receiver via the S PDIF output you have to set the Dolby Digital option to PCM which means that the digital receiver will output en coded Dolby Digital audio without decoding so that your audio video receiver can decode it Otherwise set it to multi channel then the dig ital receiver will output decoded Dolby Digital audio scaling it down to two channels NOTE
39. from where you want to start the copy using the lt q or P button 3 Press the button and it will be copied as a new file which is named after the original recorded file with a suffix of COPY and a number 4 To stop copying press the button 7 5 Transcoding a recorded file 37 7 5 Transcoding a recorded file You can encode a recordered video file to playback on other portable devices such 01 The Office as a smart phone or a media player device 02 7 Go to PVR gt Recorded Program and se ile Transcoding settings EE EM Hes lect the file you want to transcode by press Output Property EX High Compression 5 Screen Resolution KJ 640 x 480 ing the f aso no LO CN Set the File Transcoding Settings as you 3 Hour 5 Min 30 Sec 03 05 2013 08 40 need and choose OK 100 2 GB Free 463 7 GB Recorded Program May 5 10 11 Select New Folder Move G Delete Options DU Make Snapshot Play IE Information Device List File Transcoding KE Previous DJ Next Now you will see the transcoding progress bar on the top right side of the screen as shown on the left figure The transcoding progress bar will disap pear in a few seconds If you want to see the transcoding progress bar again press the F3 button 10 Transcode program name mp4 T C bs D OD Q e E 2 ke o Qa U b lt o g O As the transcoding finishes it will be saved
40. g ss 506 sche ome g E ARTE AN ead dag E BE 5 22 Safety precautions aooaa ee 5 23 Rear panel connections 2 2 6 24 Connecting up your digital receiver oaa 8 241 Connecting to the antenna llis 8 242 Connecting to your televisionset 8 243 Connecting to an external device aoaaa aaa 10 25 Switching ON for the first time aoaaa aaa 11 3 Service Search 12 3 1 Searching for broadcasting services 2 00000 12 32 Reset to factory settings oaoa 13 3 3 Reset service list runc qu Re ee US EO re altan ded 13 4 Preference Settings 14 41 Video and audio settings 2 2 ee 14 411 High definition television llle 14 412 Television aspectratio 2 2 ene 15 413 Audiomode K d RE R E NR T 16 42 Localtime setting iet 3 s zen h e a xh ee me ee RO X 16 4 3 Parental conttol e uo sect een ae ae a ee edad ag ed 17 44 Options for recording 2 ee 18 CONTENTS v 4 5 Options for playback E aE ek oan aren ee a dem 19 46 Options for on screen display 000000 19 47 Options for the front display 2 2 ee 20 48 Options for Photo Album eee 20 Every Day Use 21 5 1 Volume control 4 sse e aan a ee ee Bd de ad 21 5 2 Watching television lt lt wann sa wie bb dere de 4 RU RS 21 521 THe Services list ssi ns sein acten eate ack oh S 21 5 22 The favourite service lists ss sa pa E oes doctes a 22 5 23 Viewing programme informat
41. he mains plug shall remain readily operable so that it can be removed easily to disconnect the power When placed in a cabinet make sure there is a minimum space of 10 centimetres around it For the physical specification of the digital receiver refer to Table 2 2 6 Setup Protect the power cord from being walked on or pinched If the cord is damaged do not use the digital receiver and get the cord replaced Refer all servicing to a qualified service technician To maintain proper ventilation always leave sufficient space around the digital receiver Table 2 1 Power specification Input voltage 90 to 250 V AC 50 60 Hz Power consumption 18 W at maximum in active Under 1W in passive standby Table 2 2 Physical specifications Size 260 x 46 x 190mm Weight Net 1 9 kg Operating temperature Oto 45 C Storage relative humidity 5 to 90 2 3 Rear panel connections Check what connections your television set has in comparison with the digital receiver ANT IN Terrestrial broadcasting signal input socket 5V Max 100mA RF LOOP OUT Terrestrial broadcasting signal output socket through the ANT IN socket for other receiver S PDIF Digital audio output socket for the audio video receiver HDMI Audio and video output socket for the high definition television set 2 3 Rear panel connections 7 USB USB port for firmware update data transfer USB 2 0Host 5VDC 500mA Max VIDEO Composite video
42. ion 23 5 2 4 Selecting audio tracks ee 23 5 25 Selecting subtitle tracks 2 2 ii doia a ea 23 53 Viewing electronic programme guide n ooa 24 54 Usingitime shift s cesse soe xor a RR doe a 25 Organising Services 26 61 Editing the favourite lists 2 0 ee ee 26 Recording and Playback 28 71 Recordingaprogramme lee 29 ZAT Justantrecording some etr mee 29 7 12 Timer recording nno E ie eh ue t 30 7 1 3 Scheduling recordings using the programme guide 32 714 Recording a time shifted programme 33 7 22 Filearchive ss und ou R al eda eo RP RUE eR ooa 33 721 Todeletearecording llle 33 722 Tosottrecordings ss cs ke id eon dor ds 33 723 3 Tolockamrecording ss erea 44 REd AR oes 34 724 Torenamearecording s 34 725 Tomakeanewfolder llle 34 7 2 6 To move a recording to another folder 34 73 Playing back a recording ee 34 73 1 To navigate using the progress bar s s 35 732 Toplayinslow motion gt ic sco tetado aor aedo gadaa 35 733 To play in fast motion s to gor na dade ee 36 734 Tomakeabookmark less 36 74 Copyingarecorded file sss ee o re a de a 36 75 Transcoding a recorded file llle 37 7 6 Formatting the harddisk so s 2 2 0 0 0 0 00000000 38 vi CONTENTS 8 Accessing via Network 81 Configuring the router cs p ieii eee 8 1 1 To a
43. itches over between television services and radio services Numeric buttons are used to enter a service number for service change or to specify values for menu options XA e LP Jswitches over between the current service and the previously viewed one e 1 J displays the service information box Also displays more information about a pro gramme APP white button has different functions per menu N selects subtitle track N S not used in this model d selects audio track or sound mode N add channel to favourite channels list poe the electronic programme guide l buttons switch to the previous or next service Also navigate in menus and interactive screens 5 Ba the services list Also selects menu items buttons decrease or increase the volume Also change values for menu options displays the main menu Also returns to the previous menu from a submenu S e exits a menu or hides on screen information 4 Introduction s VL buttons decrease or increase the volume e O sets a sleep timer in 10 minute increments gt displays the list of recorded programmes that are stored in the external hard drive P P buttons switch to the previous or next service 2 COF2 aal Uac e ca has different functions per menu S UN recording stops playback recording or jumps back to live television from time shifted television has di
44. itle tracks are provided on the cur rent programme Dolby Digital symbol OM D if a Dolby Digital audio track is provided on the current programme Lock symbol Qi if the current service is locked Pressing the i button once more displays detailed information about the current programme To hide the information box press the ex button 5 2 4 Selecting audio tracks Some programmes are provided with audio tracks in one or more lan guages Pressing the button displays available audio tracks Once you select an audio track that track will be heard In addition you can enjoy audio tracks in four sound modes Stereo Mono Left or Right 5 2 5 Selecting subtitle tracks Some programmes are provided with subtitle tracks in one or more languages If the current programme provides subtitle tracks the sub title symbol will be marked on the information box Pressing the button displays available subtitle tracks Once you select a subtitle track it will be displayed 24 Every Day Use 5 3 Viewing electronic programme guide The Electronic Programme Guide EPG shows the current and sched uled programmes that are or will be available on each service with a short summary for each programme Pressing the button displays the elec tronic programme guide on which you can see the following Program Guide May 5 10 11 02 00 Scheduled programmes programme summary Broadcasting d
45. m beginning set the Starting Position option to Be ginning to play from the point that you have stopped at the last time set it to Continuing To start playback select the Play item 4 To stop playback press the button During playback you can enjoy the following tricks To see the detailed information about the currently played recording press the i button then the information box ap pears and shows its file name running time programme infor mation and so on To pause playback press the button To resume it press the button To view the progress bar press the G button to hide it press the button again e When the progress bar is hidden you can move to a desired scene by entering a progress percentage with the numeric but tons 7 3 1 To navigate using the progress bar First press the button to display the progress bar To go forward hold down the gt button to go backward hold down the button Ifthere are no bookmarks you can jump forward by the minute set to the Jump time Interval option with the F3 button See 84 5 for that option Refer to 87 3 4 as to how to bookmark a position To jump to the beginning press the button To jump to the end press the button To hide the progress bar press the button again 7 3 2 To play in slow motion To watch in slow motion during a playback press the button If you press it repeatedly the playback speed changes in
46. m other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can dis pose this product for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal At any time during the life of a product Topfield Co Ltd may change or modify the hard ware or software on any product to introduce new features or improve the functionality of the product Copyright 2014 Topfield Co Ltd All rights reserved English version http www i topfield com TOPFIELD LEADER OF MULTIMEDIA HOME
47. nal HDD is self powered Can not see the time shown on the front of the Topfield unit This can be adjusted in the Settings gt Miscellaneous gt Standby Mode from Passive to Active My Topfield recorder doesn t go to standby after instant recording When an instant recording has been activated the recorder will need to stay on until the recording finishes To place the recorder into standby after the recording has finished press the Power button on the remote control during a recording and the following message will be displayed RECORDER NOT FIN ISHED DO YOU WANT TO POWER OFF Move the green tab to YES and leave the recorder uiON but do not ex ecute the function The television may be turned off and the recorder will go into standby sleep mode when the recording has finished Cannot view guide content Perform a factory reset and service search to allow the unit to restart the guide Be sure to save your settings in the Installation section be fore applying a factory reset DOLBY DIGITAL Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories Correct disposal of this product This marking shown on the product or its literature indicates that it should not be disposed with other household wastes at the end ofi ts working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate this fro
48. net You can let the router automatically assign a dynamic IP address to the computers or devices connected to the network by enabling the DHCP server of the router In this case you can access the digital receiver with the IP address which is assigned to the digital receiver by the router If the digital receiver reboots a new dynamic IP address will be as signed to it You had better assign a static IP address to the digital receiver to avoid this inconvenience As to how to assign a static IP ad dress refer to the manual of your router as to how to specify a static IP address on the digital receiver see 9 2 over the Internet When you are away from home you can access the digital receiver inside your home if your router is configured to route access to the digital receiver by means of port forwarding Via this feature your router will lead you to the digital receiver when you access your router with its IP address Your router may be assigned to a dynamic IP address by an Internet service provider So if the router has rebooted you cannot access it unless someone in your home can inform you of the changed IP ad dress However many routers support Dynamic Domain Name Sys tem DDNS service which can settle this problem The following im age is an example of one such DDNS service provider If you use a DDNS service you can access your router with a domain name The instructions on how to use the DDNS service are as follows
49. o play back a recorded file from the part where you were watching set this option to Continuing If you want to enjoy more levels of playback speed set the Trick Mode Level option to 2x 4x 8x 16x 32x 64x 128x otherwise set it to 4x 16x 64x 128x 4 6 Options for on screen display To set the options for the on screen display OSD select the Settings gt OSD menu To adjust the transparency level of the OSD set the OSD Transparency option as you desire Its available range is 0 to 50 percent To adjust the display time of the information box set the Info Box Dis play Time option as you desire Its available range is 1 to 30 seconds If you set this option to No Info Box the information box will not be displayed when you switch services However pressing the i button will display the information box If you set this option to Never Hide the information box will always be displayed For the information box see 85 2 3 If any service s name is too long to fit the width of the service name column on the services list screen you can get it to scroll by setting the Text Scroll option to anything other than Disable With the choice of Full Scroll it will be fully scrolled until its end disappears with the choice of Part Scroll it will be scrolled only to its end 20 Preference Settings 4 7 Options for the front display To set the options for the front display select the Settings gt Front Display menu
50. orded contents to view on other portable devices L 5 P Q c 7 3 2 Introduction You can use various web services including YouTube e You can use the web browser to view online contents You can share media files with other device across the same home network 12 Controlling the digital receiver You can operate the digital receiver with the remote control or the but tons on the front panel NOTE Even when you are not using the digital receiver you should keep it plugged into a wall socket to be in standby mode so that it can run timer events at any time 1 21 Front panel The front panel of the digital receiver has buttons to control the digital receiver specific lights and a display to indicate its status i TOPFIELD act i O 071 o O I switches the digital receiver between standby mode and active mode Front display shows the current time in standby mode and displays the current service in active mode ACH WCH switch to previous next service L 1 2 Controlling the digital receiver 3 1 2 2 Remote control mA EX Q c 7 3 N button switches the digital receiver between standby active mode N mutes the sound Press again to switch it back on VF changes video resolution N AR changes aspect ratio N aux not used in this model 4 i m x s Ta sw
51. r accessories are subject to change with out any notice in order to introduce new features or improve the functionality of the product Quick Setup in five easy steps Connect the aerial antenna to the ANT IN on the back of the Topfield unit Connect your desired audio video cables from the back of the Topfield unit to the television con nectors Composite Component HDMI Plug into power point and turn Topfield unit ON using the switch on the back of the unit Switch television on then use the television remote to select the correct video input channel for the Topfield unit for example AV1 AV2 Component HDMI etc On the main menu go to Installation gt Searching then scroll to Start Search and press OK Wait till the progress bar on the bottom of the screen reaches 100 and then press to save and EXIT to exit The TF RCU app for Smart Phone Download the TF RCU app to control this unit with your smart phone The RCU application is available to download from the App Store or Google Play Store App Store is a registered trademark of Apple Inc Google Play is a trademark of Google Inc iv CONTENTS Contents Contents iv 1 Introduction 1 DE ZR at res u Autosta ko glee Ro ned oq ang BM eos B Age LS 1 12 Controlling the digital receiver 2 2 ee 2 12 1 Bront panel 242024 ese wend tat ae ure en ee 2 122 Remotecontrdll i a a A A R E EE 3 2 Setup 5 25 Umnpackin
52. stick Insert the USB memory stick into the USB port on the digital receiver Select the Installation gt Firmware Upgrade gt USB Firmware Upgrade menu and the files in the USB memory will be listed Place the highlight bar on the right firmware file and press the button and a countdown will be displayed on the front dis play of the digital receiver When the message of END appears restart the digital receiver 45 Appendix A Troubleshooting List of Symptoms No power No front display lees 54 I have connected my Topfield unit to the TV but getting no picture 54 When the Service Scan is finished I get zerochannels 54 Getting pixilated images on the my Television 54 Can not receive or adjust sound through the Topfield unit 55 Can not rewind live Television llle 55 The Free to Air Guideis blank x ss aan n 55 Can not set the correct aspect ratio llle 55 Lost part of my show because it went longer then the set time 55 Can not get a network connection l l 56 Can not connect my external HDD 56 Can not see the time shown on the front of the Topfield unit 56 My Topfield recorder doesn t go to standby after instant recording 56 Cannot view guide content llle 56 Before you call a repair person for your Topfield product check the list of possible problems and solutions gt D L gt
53. the O button will not pause the current recording like it does with a video recorder Instead pressing the button will pause the live show and begin time shifting within the current recording even with the Time Shifting option disabled In short it is still possible to pause a recording but literally recording continues in the digital re ceiver 30 Recording and Playback End of recording Duration After this program After next program After a recording has started pressing the 2 Hour OMin button displays a menu like the left fig Not available 9 x Not available ure in which you can set the recording du ration To specify an arbitrary recording duration set the Duration option as you desire with 00 00 33 Recorded 0 4 2 Hour 0 Min the lt q or P buttons and press the but ton the recording will end at the specified time If the information about the next programme is provided by the elec tronic programme guide the After this program and After next pro gram options will be enabled Once the After this program option is selected the current recording will stop at the time when the current programme is scheduled to end Likewise once the After next program option is selected the current recording will stop at the time when the next programme is scheduled to end Stop Recording To stop recording press the button 23 ABC 3 ABC 3 then a box like the left figure appears Contin
54. ue recording which shows the programmes currently being recorded Select recording by using navigation buttons then press button to stop the recording While a recording is going on you can watch or record another ser vice To additionally record another service switch to the service you want to record and press the button Once a recording is started itis put on the recorded programme list even though it is not finished yet The recording file is named the program name if available or af ter its service name with a suffix of a number To view the recorded programme list press the button or alternatively select the PVR gt Recorded Program menu See 7 2 for detailed description about the recorded programme list 7 1 2 Timer recording You can set a programme to be recorded at a specific time Even if the digital receiver is in standby mode it will switch into active mode and 7 1 Recording a programme 31 start recording at a specified time When the recording comes to the end the digital receiver will switch back into standby mode again in one minute However if you press any button on the remote control or on the front panel even just one time the digital receiver will not switch into standby mode To add a timer recording select the PVR gt Reservation menu then the timer list will be displayed To add a new timer event TW press the F1 button and a box like the left 24 ABC News 24 gt n One Tim
Download Pdf Manuals
Related Search