Vive User Manual
Contents
1. for Sonic Studio TRAINING The noise reduction component relies on a good noise print A noise print is a average spectrum snapshot a of the undesired signal The noise print must contain only undesired noise so choose the section of audio very carefully It may take a few tries to find an area that is ideal To train select a clip of audio with only noise click the train checkbox and play the audio through the Vive plug in The white and blue spectra will change with the audio and the white spectrum will be the noise print Though it is possible to train with any length of audio clip between two and four seconds is recommended Once there is a stable noise print unselect the train checkbox and select a clip of audio you want to process THRESHOLD The threshold controls the level at which noise Suppression starts relative to the noise print It is recommended to leave the threshold at the default level and adjust the amount first Raising the threshold above its default value will cause greater suppression of noise but also greater suppression of desired signal Lowering the threshold below its default will allow more undesired noise but will also allow more desired signal AMOUNT The amount control dictates the maximum level of Suppression At the lowest setting it will not Suppress any Signal and at the highest level it could allow up to a maximum of 40dB of Suppression The sup2. VIVE OVERVIEW The Vive restoration plug in is a suite of three components including noise reduction de clipping and de clicking Together these algorithms provide a fast and effective way to touch up a recording by reducing the broadband noise reducing the distortion caused by clipping and reducing intermittent clicks REGISTRATION amp AUTHORIZATION Vive is fully operational without registration or authorization for 30 days After this point it will be necessary to register with the serial number provided by Sonic Studio using the iZotope authorization system You can use online or offline authorization depending if the computer to be authorized has an internet connection To start the registration process open the Vive Ce plug in and follow the instructions on the authorization wizard that appears COMMON CONTROLS Each of the three components can be bypassed or enabled with the enable checkbox on the right hand side When a component is disabled it does not contribute to the overall processor usage of the plug in The individual effects are processed in the following order de clipping de clicking noise reduction NOISE REDUCTION The noise reduction component is designed to reduce static broadband noise in a signal To Operate simply train using a clip of audio with only noise and then process the entire clip adjusting the threshold and amount to suit 1 of 3 Vive
3. m and the iZotope logo are either registered trademarks or trademarks of iZotope Inc in the United States and or other countries All other trademarks trade names service marks and logos referenced herein belong to their respective companies 3 of 3 Vive for Sonic Studio
4. pression only occurs in places where the signal drops below the threshold The level of suppression is based on many factors but the amount guarantees an upper bound DE CLIPPING The de clipping section automatically detects and regenerates an audio Signal that is distorted as a result of an overload in level The sensitivity control sets which level is detected as clipping It is recommended to start with a low value and slowly increase the sensitivity until the clipping distortion is reduced 2 of 3 Vive for Sonic Studio DE CLICKING The de clicking section automatically detects and removes short clicks and pops in the audio signal The sensitivity control affects the magnitude of the clicks that are removed It is recommended to start with a low value and slowly increase the sensitivity until the click is reduced PREVIEW MODE Preview mode is designed to allow you to experiment with Vive s settings while previewing audio When in preview mode Vive operates at a reduced quality setting which consumes less processing power When rendering audio you should disable preview mode to allow Vive to operate at its highest quality setting ABOUT Vive is powered by technology under license from iZotope Inc 2005 2006 iZotope Inc 2006 iZotope Inc All rights reserved Product features Specifications system requirements and availability are subject to change without notice Vive iZotope izotope co
Download Pdf Manuals
Related Search