FRONT PANEL : BACK PANEL:
Contents
1. does not fit into your mains outlet consult a qualified electrician for replacement of the obsolete outlet 6e Protect the power cable from being walked on particularly at the mains socket or at the point of connection to the apparatus 7e Only use attachments or accessories that are specified by the manufacturer 8e Always unplug the device when leaving it unused for an extended period of time or in the event of a thunderstorm 9e Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way particularly the plug or power cable liquids spilled or foreign objects dropped into the apparatus or if the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 10 The apparatus should be connected to a mains socket outlet with a protective earthing connection 11 The mains plug is used to connect or disconnect the device By maintaining the apparatus connected to the mains it shall remain readily operational MARKING amp CONFORMITY 1 The C ETL US mark on this product means it conforms to the safety and performance standards UL 60065 and CSA C22 2 n 60065 03 accepted throughout the United States and Canada 2 The Crossed out Wheeled Bin is to drawn your attention on the WEEE Waste Electric amp Electronic Equipment Directive 2002 96 EC It means this apparatus should be collected separately for recycling 3 RoHS complian2. r is powered off 10 POWER This switch turns the amplifier on or off USER S MANUAL Y 10 AA USA CAUTION WARNING To REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT RISK OF ELECTRIC SHOCK EXPOSE THIS EQUIPMENT TO RAIN OR DO NOT OPEN MOISTURE DATE CAUTION To PREVENT ELECTRIC GID A SHOCK DO NOT REMOVE TOP OR INPUT 110V 60Hz FUSE T1AH 250V C yei US BOTTOM COVERS NO USER SERVICE ae ABLE PARTS INSIDE C PWR 16W K 22 2 No 60065 03 BACK PANEL WARNING This amplifier must be earthed Please check that the supply voltage details given on the rating label located on the rear panel are in accordance with your electricity supply ee FUSE In the event of the power fuse having to be replaced first unplug the power cable from the mains outlet Then remove the fuse cover and replace the power fuse with another fuse of the same type and value Never plug the power cable back into the mains outlet without the fuse cover If the power fuse blows up again when powering on the amplifier take the apparatus to a suitable service centre for repair MAINS CABLE This amplifier features a power cable with a moulded on plug If the socket outlets in the home are not suitable for the plug supplied with this amplifier use an appropriate plug adapter that can handle the power required for this amplifier In case the power cable or plug is damaged unplug it in a safe way from the mains outlet and go to a suitable service centre fo
3. r replacement TECHNICAL SPECIFICATIONS 10 Watts RMS 8 Ohms load 6 5 Speaker w Coaxial Tweeter 70 Hz to 12 kHz 68 dB max Rated Power Max Rated Power Loudspeaker Frequency Response Total Harmonic Distortion Signal to Noise Ratio Input Impedance 180k Ohms Power Consumption 20 Watts max Maximum Input Level 30 mV RMS Dimensions H x W x D 25 5 x 28 x 17 2 cm 10 x 11 x 6 8 inch Features and Specifications are subject to change without notice 10 AA USA 3 USER S MANUAL INSTRUCTIONS FOR USE Plug the mains lead into a suitable power socket and connect your instrument to the input socket of the amplifier with a suitable guitar lead this lead is not supplied with the amplifier but is normally supplied with the electric guitar Finally press the Power Switch to the ON position the power LED will glow and your amplifier is ready for use Universe of Mune IMPORTANT SAFETY INSTRUCTIONS USERS MANUAL 1e Read all instructions carefully 2e Keep this instruction manual for future reference 3e Please follow all instructions and heed all precautions as stated 4e Do not use this apparatus on or near water 5e Always use a polarized grounded plug as supplied A grounded plug has two blades and a third grounding prong The wide blade or third prong is provided for your safety Do not compromise the integrity of its safety purpose by altering or modify this plug in any way If the provided plug
4. t means this device conforms to the Directive 2002 95EC on the restriction of the use of certain hazardous substances in electrical and electronic equipments such as Mercury Lead Cadmium Hexavalent Chromium Polybrominated Buphenyl PBB and Polybrominated Diphenyl Esthers PBDE DISTRIBUTOR DEALER ACOUSTIC GUITAR AMPLIFIER 10 AA USA EMD Music 01 2008 USA compliant a p USER S MANUAL A 10 AA USA
5. w 0 active acti INPUT PHONES Volume MP3 FRONT PANEL 1 INPUT This is a 1 4 6 3 mm input jack socket for plugging in an electro acoustic instrument We recommend that you always use a high quality shielded guitar cable to prevent any background noise interference or unwanted feedback 2 VOLUME This control determines the output volume of any instrument plugged into the amplifier via the guitar input jack 3 PASSIVE ACTIVE SWITCH This switch enables the user to choose between passive and active modes according to whether the instrument connected is passive without preamp or active with preamp 4 TREBLE This control determines the level of high frequencies in the output signal Adding TREBLE will make your guitar sound brighter and sharper 5 MID This control determines the level of middle frequencies in the output signal Adding MID will make your guitar sound rounder and fuller 6 BASS This control determines the level of low frequencies in the output signal Adding BASS will make your guitar sound warmer and heavier 7 CD MP3 INPUT This is a line level 1 4 6 3 mm stereo jack into which an MP3 CD Tape player may be connected 8 PHONES This is a 1 4 6 3 mm stereo jack output to connect the headphones When headphones are connected no sound is produced from the speaker 9 POWER LED When this red LED is lit the amplifier is ready to work When it is off it means the amplifie
Download Pdf Manuals
Related Search