User manual A - Utcfssecurityproductspages.eu
Contents
1. Lightning For added protection during a lighting storm or when this unit is left unattended and unused for long periods of time unplug the unit from the wall outlet and disconnect the cable system This will prevent damage to the unit due to lightning and power line surges 8 Mains plug 2 pin 3 pin Do not remove the grounding or earth connection from the power supply mains plug User Manual 5 EN Always remember to unplug the monitor from the power supply under the following circumstances if the monitor will not be used for a long period of time if the power supply cable or plug connector is damaged or if the monitor housing is damaged or broken CAUTION Do not attempt to dismantle this product Any attempt to dismantle or remove the covers from this product will invalidate the warranty and may also result in serious injury Introduction Features e Auto detection of video format e Integrated 8 bit triple channel ADC PLL e Built in internal amplifier and speakers x2 e 1280 x 1024 SVGA support for computer input 17 19 e Supports multiple language selections e 2D comb filter and 2D de interlace Package contents The standard package includes the following e 17 in 19 in VGA monitor e Power adapter 12 VDC 4 A 100 to 240 VAC 50 60 Hz e VGA cable e AC power cord 1 2 m e User manual Storage e Do not store the monitor in temperatures greater than 60 C 140F or relative humidity greater t2. Changes are immediately saved and implemented The menu screen timeouts after 10 seconds and returns to live mode To change a monitor parameter 1 Press the MENU button on the front panel to obtain the OSD menu screen and toolbar 2 Press the or buttons to scroll across the menu toolbar The settings are Color Image OSD Source and Exit See Description of the menus below for further information 3 Press the up V or down buttons to scroll up or down the list of options in the selected submenu 4 Press or buttons to increase or decrease the value of the OSD menu option selected Note To quit a submenu and return to the menu toolbar press the SOU AOU button Description of the menus Figure 3 Menu toolbar Color Image OSD Source Exit Color Auto Color Automatic color adjustment Only for RD engineer mode Contrast Adjusts light and dark level of the TFT display Setting values range from O0 to 100 Default is 50 Brightness Adjust shade and brightness level of TFT display Setting values range from 0 to 100 Default is 50 Color Temp Adjusts the color temperature 9300K Selects cold color temperature White and Blue color bias User Manual 9 EN Image EN 10 6500K Selects normal temperature Comprehensive color 5800K Selects warm color temperature Yellow bias SRGB Special application for computer source R G B 128 that setting would be display true color faith
3. 11 EN 4 User Manual Important safeguards 1 Installation cautions Do not block any ventilation openings Always ensure that the monitor is located in a well ventilated area to prevent the unit from overheating e Only use accessories specified by the manufacturer or those sold with the product Avoid operating or placing the monitor in the following environments extremes of temperatures both hot and cold high humidity direct sunlight excessively dusty surroundings avoid close proximity to other equipment that generates a strong magnetic field 2 Water and moisture Do not use this appliance near water To reduce the risk of fire or electric shock do not expose this unit to rain or moisture 3 Power cord and power cord protection Power cords should be routed so that they not likely to be walked on or pinched Pay particular attention to the location of cords and plugs convenience receptacles and the point of exit from the appliance 4 Product care Do not touch the screen directly with fingers The oils from your skin may leave marks on the surface of the screen which are difficult to be removed and may damage the screen permanently Do not apply pressure to the screen 5 Cleaning Clean only with a dry cloth 6 Servicing Do not attempt to service this unit yourself Opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel 7
4. a ie interlogix A UTC Fire amp Security Company TruVision GEL 17 in 19 in VGA Monitor User Manual P N 1070521A REV 1 0 ISS 17MAR11 Copyright Trademarks and patents Manufacturer Certification FCC compliance FCC compliance 2011 UTC Fire amp Security Company All rights reserved Interlogix TruVision and logos are trademarks of UTC Fire amp Security Other trade names used in this document may be trademarks or registered trademarks of the manufacturers or vendors of the respective products UTC Fire amp Security Americas Corporation Inc 2955 Red Hill Avenue Costa Mesa CA 92626 5923 USA Authorized EU manufacturing representative UTC Fire amp Security B V Kelvinstraat 7 6003 DH Weert The Netherlands CE This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Class B This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may
5. ations Model 17 19 Display resolution 1280 x 1024 75 Hz Panel Active area H x V 338 x 2708 mm 376 x 301 mm Pixel pitch 0 264 mm 0 294 mm LCD profile ratio 5 4 Display color 16 7M colors Brightness 300 cd m TYP Central Contrast ratio User Manual 800 1 TYP 1000 1 TYP 11 EN Model Viewing angle Response time Input voltage VGA input Audio input Speaker Power consumption Operation temperature Storage temperature Note 17 19 Left 80 Right 80 Left 85 Right 85 Up 80 Down 80 Up 85 Down 85 5 ms TYP 96 to 256 VAC 60 Hz 50 Hz 15pin D SUB connector x 1 3 5 mm stereo jack 1W 1W 35 W 0 to 50 C 32 to 122 10 to 60 C 14 to 140F 1 TYP The brightness specification is from the panel specification 2 Design and specifications are subject to change without notice EN 12 User Manual
6. cause harmful interference to radio communications There is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the European Union directives Contact information interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help 2004 108 EC EMC directive Hereby UTC Fire amp Security declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2004 108 EC 2002 96 EC WEEE directive Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union For proper recycling return this product to your local supplier upon the purchase of equivalent new equipment or dispose of it at designated collection points For more information see www recyclethis info www interlogix com Content Important safeguards 5 Introduction 6 Product dimensions mm 7 Operating instructions 7 OSD configuration 9 Description of the menus 9 Specifications
7. fully User Customizes the red green and blue gain levels Exit Return to live mode Auto Adjust Automatic adjustment for optimal image parameters H Position Adjusts the horizontal position of display screen Setting values range from 0 to 200 Default is 100 V Position Adjusts the vertical position of display screen Setting values range from 0 to 18 Default is 9 Clock Adjusts the clock of the display screen Setting values range from 0 to 100 Default is 50 Phase Adjusts the phase of the display screen Setting values range from 0 to 63 Default is 15 Sharpness Adjusts the sharpness of display screen Setting values range from 0 to 4 Default is 2 Exit Return to live mode User Manual OSD OSD H Pos Adjusts the horizontal position of the OSD area Setting values range from 0 to 100 Default is 50 OSD V Pos Adjusts the vertical position of the OSD area Setting values range from 0 to 100 Default is 50 OSD Timer Adjusts the OSD appearance time unit is seconds Setting values range from 0 to 27 Default is T Reset Return to default setup Language Selects one of eight OSD languages English Japanese Simplified Chinese Tradition Chinese Italic German French and Spanish Default is English Factory Mode Not in use Exit Return to live mode Source D SUB Displays the information that the VGA connector used is D SUB 15 pin type Exit Return to live mode Specific
8. han 85 e Store in a dark place keep away from sunlight and ultra violet UV radiation EN 6 User Manual e Air bubbles may develop within the glass screen if these recommendations are not observed Product dimensions mm 17 371 92 19 420 1r 352 83 19 400 Operating instructions Figure 1 I O connectors on the rear panel O No Connector 1 VGA 2 PC Audio In 3 DC User Manual EEC d Description Connect to a RGB input terminal such as the display card output DVI terminal of the personal computer Connect a PC phone jack for audio source of RGB output terminal Connect 12 VDC 7 EN Figure 2 Front panel controls MENU F N SOU AOU LED EN 8 In live mode press to access the OSD menus In menu mode press to increase the value of the OSD menu option selected In live mode press to increase volume In menu mode press to decrease the value of the OSD menu option selected In live mode press to decrease volume In menu mode press to scroll down OSD menu option list In menu mode press to scroll up OSD menu option list In menu mode press to quit a submenu and return to the menu toolbar In live mode press to auto adjust image In live mode press the quit volume adjust mode Power indicator Press to switch the monitor on off User Manual OSD configuration Configure the monitor using the onscreen display OSD menus and submenus
Download Pdf Manuals
Related Search