CR Series In-building Repeater
Contents
1. Feature Sheet lt SignalReach CR Series In building Repeater AMPS e PCS e TDMA e GSM e CDMA e iDEN Description The SignalReach CR Series In building Repeaters extend cellular and iDEN services into buildings and other poor coverage areas The CR Series Repeaters are designed for use with cellular and iDEN telephones 850 and 1900 MHz and iDEN band and offer a cost effective solution for small business and residential applications The repeaters are useful in areas where cellular or iDEN service is available outside of the building and marginal indoors The two way radio functionality of cellular and iDEN telephones is preserved The repeaters are network compatible devices that amplify cellular or iDEN signals in both the uplink and downlink directions The repeaters are simple to install and contains circuitry to ensure proper operating power levels and as well include automatic low isolation and detection circuitry that detects low isolation between the indoor and outdoor antennas In this condition the repeaters will adjust their gain to compensate for the abnormality and warn the user through an indicator LED The CR Series Repeaters will enhance the cellular or iDEN telephone user s experience while complying with cellular and iDEN network specifications The repeaters will also work with wireless PDAs Wireless Digital Assistants and laptop personal computers with wireless PC cards Linear operation is guaranteed under all2. conditions The CR Series Repeaters allow up to two indoor antennas to be used without the need of external components Their auxiliary indoor antenna port allows a second indoor zone to be easily connected The repeaters can be battery backed by connecting the repeaters 12VDC supply to the spades of a rechargeable battery with the repeaters optional battery back up interface cable The rechargeable battery is then permanently connected to the battery manufacturer s recommended trickle charger keeping the battery charged indefinitely ready in the event of a building power failure Features e Easy Installation no calibration required e Auxiliary in building antenna port provides q 7 Optional Interior Exterior e Up to 40 000 sq ft of free space coverage enhanced coverage Y 2nd Antenna Antenna with two interior antennas e FCC amp Industry Canada approved Interior e Automatic Low Isolation Detection and e Can be connected to battery back up system for Anenng Indication Circuitry emergency powering e Feedback Overload Shutdown and Auto Start Optional battery back up interface cable e Auto levelling circuitry ensures linear available CR Series operation Repeater e Network compatible operation RF Specifications Specification CR100 CR300 CR500 Specification All Products Cellular iDEN PCS Up link Frequency Range MHz 824 849 806 825 1850 1910 Low Isolation Detection An amber LED indicator will indicate low is
3. ed All trademarks listed in this document are the property of their respective owners Specifications are subject kT a Ig nalkeac to change without notice www signalreach com D00001146 Rev E
4. olation between indoor Output Power dBm 23 23 23 and outdoor antennas Maximum Gain dB 60 60 60 Maximum Possible At the interior antenna port exposure to non ionizing radiation meets Exposure MPE or exceeds the permissible FCC mandated MPE specification Down Frequency Range MHz 869 894 851 870 1930 1990 link Output Power dBm 15 15 15 Group Delay 150 nS Typical Maximum Gain dB 60 60 60 Gain Flatness 3 dB Noise Figure lt 6 dB General Specifications Specification All Products 120V AC adapter included 500mA 12V for CR100 and CR300 1A 12V for CR500 Power Requirements For battery back up third party back up system must be 12VDC 8 Amp Hours min for 8 hours operation on battery Operating Temperature Range 40 to 60 C 40 to 140 F indoor use only Dimensions 165mm L x 152mm W x 33mm H 6 50 L x 5 98 W x 1 30 H without RF connectors Net Weight 1 36 kg 3 Ibs RF Connectors TNC Female Recommended Indoor Antenna 3 dBi ceiling mount omni directional Recommended Outdoor Antenna Directional Yagi Included Accessories 120V AC adapter Optional Accessories i Battery back up interface cable 1 Recommended exterior antenna cable types are indicated in the product s installation and user manual An exterior directional antenna may be required in some cases where network coverage is weaker For more Information Contact sales signalreach com Jo Si IR h 2002 2006 SignalReach All rights reserv
Download Pdf Manuals
Related Search