1. Cam Wiper Helmets User Manual Rev3 7 HaiHao Technology Product Statement a Helmet is main product passed some regulations safety test like CNS DOT ECE b Visor is add on parts easy to setup passed CE ROHS IPX5 Cam Helmets Cam Wiper Helmets Power light Photograph Green oe Blue Low Battery USB socket Batteries Option button Wiper LED light Camcorder operation A Set SD card speed C10 into socket Press the rubber cover 4 button to flat the high same the wall B Install 4 batteries C Power on 1 The Green power light brightening 2 The Blue light continuous flashing for recording included charge light Red bright or non bright it is no problem Wiper operation D When LOW BATTERY indicator light bright must be updated batteries within 30 min A Power on hear the Beep sound and power light bright Green if you want to continuous to use B Red button Continuous mode Continual swing and press any Remarks When power on the Blue light doesn t flash it is un normal please check 1 SD button to stop card and Batteries setting 2 Power off then press RESET button then Power on again C Green button Intermittent mode Swing once of every 4 seconds and press any botton to stop Option USB power connector attached USB cable and adapter connected to DC 5 volts E Change Wiper blade press wiper arm frame tip point and squeeze F Install the blade make sure indic 2. ator arrow head of blade to down If some lights didn t extinguished please press the RESET button to finished position then insert the blade to the frame of wiper arm Patented products CE RoHS IPX5 Made in Taiwan www haihao com tw Haitao