User`s Manual - Oak Tree Health
Contents
1. 3 Place the raised platform end of 5 Without touching the used 6 Please discard used disposable safety lancet on the test site lancet stick the lancet tip into lancets according to your facility s 4 Gently push the safety lancet its protective cover guidelines Or discard the used down against test site to disposable lancet into an appropriate activate the lancet mechanism sharps or biohazard container 25 Running a Blood Glucose Test with Blood from Fingertip 1 Wash your hands with soap and warm water Rinse and dry thoroughly You can also use an alcohol prep pad to clean the site When testing others a new pair of clean gloves should be worn before testing each patient 2 Put a test strip into the meter in the direction of the arrow The meter turns on and the icon shows automatically 3 Press Left button or gt Right button to set a Patient number and press db to confirm the setting only if M function is on d 7 AEN Please wait at least 5 seconds until the intended area is dry and clean before using the safety lancet Remove the protective lancet cap Position the lancet and press it firmly against the puncture site Note If the function of M is on and you do not choose a medical record number before applying blood the test result will be recorded under M Vu se 7 Gently squeeze and or massage the fingertip until a round drop of bl2. Note If the Patient Medical Record is on it does not matter which record number you select if you flag the result as a control solution test The result will be displayed in the meter s memory as a control solution test 20 6 Touch the drop to the blood collection area at the tip of the test strip Do not put control solution on the top of test strip The meter starts to count down from 5 seconds and will show the results EASYMax LTC 7 Do not remove the test strip until you confirm that the reading falls within the range printed on the test strip vial Be sure to match the correct control solution range to your test result 8 Push the Strip Ejector to eject the test strip into a proper trash receptacle 21 Understanding Control Solution Results The label on your test strip vial shows the acceptable ranges for the different control solution levels The result you get should be inside the acceptable range for the appropriate control solution level Make sure you compare the result to the correct level of control When the control result is inside the range on the test strip vial your test strips and your meter are working properly If your control solution result is not within the acceptable range printed on your test strip vial look at the troubleshooting checks on next page 22 Troubleshooting Checks Was the test strip exposed to open air for a long period of time Action Repeat the con
3. www fda gov MedicalDevices Safety AlertsandNotices ucm224025 htm CDC Clinical Reminder Use of Fingerstick Devices on More than One Person Poses Risk for Transmitting Bloodborne Pathogens 2010 http www cdc gov injectionsafety Fingerstick DevicesBGM html Why is it so important to test blood glucose regularly Testing blood glucose regularly can make a big difference in how you or your patient manages their day to day diabetic care We ve made EasyMax LTC Self Monitoring Blood Glucose System as simple as possible to help you use it regularly Do you need help If you have questions or need assistance please call the Customer Care Service toll free at 866 994 3345 Eastern Standard Time Mon Fri 8 00AM 6 00PM Important Information about your new EasyMax LTC Meter The EasyMax LTC Blood Glucose Meter is designed and approved for testing fresh capillary whole blood samples from the fingertip palm and forearm The meter is for in vitro use ONLY for testing outside the body It should not be used to diagnose diabetes Remove batteries if the meter will not be used for one month or more The EasyMax LTC Blood Glucose Meter can only be used with EasyMax 15 Blood Glucose Test Strips Other test strips will give inaccurate results EasyMax 15 Blood Glucose Test Strips feature a unique and accurate glucose dehydrogenase chemistry system Testing is not valid for neonatal blood specimens Do not disassemble the meter as this may
4. date are still correct See Section Setting the time and date in Chapter 1 3 Once 480 results are in memory adding a new result causes the oldest one to be deleted 30 Viewing and Deleting Test Results 3 To delete a test result press Left button for more than 2 seconds and display shows dEL press to confirm deletion 4 Press Left button or gt Right button to keep reviewing the results 1 Press Left button or gt Right 2 The test results of control button to view the test results of solution will show without each patient s number Patient s numbers and will have the control solution icon located in the left corner 31 Using With Your Computer To Transfer data the meter can be turned on or turned off The USB mini port can be found on the bottom of your meter below the power left and right buttons 1 Use the USB cable to connect 2 The meter starts to transfer 3 When all data is uploaded from your meter and computer The data to the GlucoManager the meter to the PC the meter display shows PC software shows OK and beeps In the software select Multiple Management 32 Chapter 5 Maintenance and Troubleshooting Battery Information The meter uses two alkaline 1 5V AAA batteries Batteries will normally last for more than 2000 tests Other types of 1 5V AAA batteries are also acceptable but the capacity of test times may differ Install the batteries
5. 3 7 x 2 0 x 0 8 inches 94 x 50 x 19 5 mm 1 68 oz without batteries 47 7 1 gram Electrochemical biosensor technology GlucoManager H Limitations The test strips are used for fresh capillary whole blood samples 1 2 3 4 5 6 DO NOT use neonate blood sample Extreme humidity may affect the results A relative humidity greater than 90 may cause incorrect results The system should be used at temperatures between 50 F and 104 F 10 C and 40 C Outside this range the system may get incorrect results DO NOT reuse test strips The test strips are for single use only Hematocrit The hematocrit between 20 and 60 will not affect the results Hematocrit below 20 may cause higher results Hematocrit above 60 may cause lower results Altitude up to 10 000 feet above sea level has no effect on readings Healthcare Professionals Please note these additional Limitations 1 If the patient has the following conditions the result may fail Severe dehydration Severe hypotension low blood pressure Shock Astate of hyperglycemic hyperosmolar state with or without ketosis Lipemic samples Cholesterol level up to 500 mg dL and triglycerides up to 3 000 mg dL do not affect the results Grossly lipemic patient samples have not been tested and are not recommended for testing with the EasyMax LTC Blood Glucose Meter Critically ill patients should not be tested with home use blood glucose meters DO NOT
6. Does the meter turn on Does the meter beep Does the meter have stored results Is the display clear Can you read the result After each disinfection 1 Insert test strip Does the meter turn on 1 Press and hold power button for 3 sec 2 Press and release left or right button Does the meter turn off Does the meter turn on button for 3 sec Does the meter beep Does the meter have stored results right button Is the display clear Can you read the result Action If any of the results are No the user should call the Customer Care Service toll free at 866 994 3345 Eastern Standard Time Mon Fri 8 00AM 6 00PM for assistance 2 Run control solution test Any reading Is the reading within control range 36 Physical Appearance check of the meter after each cleaning or disinfection Check item Accept Result Is the display clear to read Is the screen clear Yes Is the strip slot and other parts free of corrosion Yes Action If any of the results are No the user should call the Customer Care Service toll free at 866 994 3345 Eastern Standard Time Mon Fri 8 00AM 6 00PM for assistance Meter Life when Cleaned and Disinfected The meter has been tested through 20 000 validated cycles 10 000 cycles of cleaning and 10 000 cycles of disinfection If the meter is used for 9 cycles of cleaning and 9 cycles of disinfection per day it will last in professional use for 3 years 37 Cleaning And Disinfection Fr
7. cause damage to the components resulting in incorrect readings Disassembling the meter will also void the warranty Always keep the meter clean and store it in a safe place Protect the meter from direct sunlight to ensure a longer lifespan You should not store the meter and test strips in a car a bathroom or a refrigerator Keep the meter test strips and safety lancets away from children and pets You should not test critically ill patients with home use blood glucose meters Critically ill patients should not be tested with blood glucose meters See page 9 for more information m Warning for potential biohazard Healthcare professionals using this system on multiple patients should be aware that all products or objects that come in contact with human blood even after cleaning should be handled as if capable of transmitting viral disease Note Do not touch the strips with wet hands m Do not use expired strips the expiration date is shown on the vial m Do not bend cut or twist the strips m Altitude up to 10 000 feet above sea level has no effect on readings Health Related Information If the patient is experiencing dehydration frequent urination low blood pressure shock or hyperosmolar hyperglycemic nonketotic coma HHNKC you may get a test result that is lower than the actual blood glucose level We recommend confirming the result on such patients via a clinical laboratory If you have followed the steps in the use
8. use during xylose absorption testing Xylose in the blood will interfere with the Self Monitoring Blood Glucose System Interfering Substances depend on the concentration EPS EasyMax LTC mfg has tested above the therapeutic levels and at or above the suggested testing levels of the EPA for many common substances 45 Based on this chart many of these substances do not have an effect on EasyMax LTC blood glucose results Blood Concentration mg dL s Suggestion tested Result EPS Exogenous Interferent Therapeutic Conc conc by EPA Acetamnopen 2S AscorbicAcid 08 312 4 J A O Dopamine NA 009 426 O Gentisic Acid 18 J 23 18 6 a Ibuprofen 05742 4 590 J S f L Dpa 205 80 32 j Methyldopa _ 01 05 05 2 Sodium Salicylate 15 30 BU Tetracycline 04 Z 15 15 Tolbutamde 53 310 64 J A310 9 25 B mbimunonugaed 12 4 Cholesterin 230 350 9 j Creatinine 315 1550 30 Triglycerides 190 150250 100 UrcAdid 7 14 139 54119 9 Frmrcose 230 9 Galactse 10 10 20 9 Device In
9. when you first use the meter or replace with new batteries when the LP low power message and the low battery symbol appear on the display Note 1 27 3 The meter won t delete earlier records after you replace the battery You should reset the time and date again after you replace the battery 1 5V AAA x 2 batteries are available at most stores You may take the old battery with you for replacement Remove the battery when you will not be using the meter for one month or more 33 Cleaning and Disinfecting the EasyMax LTC Meter in LTC Settings Choosing a disinfectant According to Guideline for Disinfection and Sterilization in Healthcare Facilities in 2008 you should clean your glucose meter after every use to prevent any possibility of cross infection Wipes used should be EPA registered as a disinfectant Many EPA registered disinfectant wipes have 2 minute claims If your wipes have higher or lower kill times you should adjust your technique accordingly Cleaning and Disinfection Instructions Please keep the meter free of dirt dust bloodstain and water stains After every use follow both the cleaning and disinfection instructions below using the EPA registered wipes Meter cleaning area Possibility of Code Name contact Uih biodi A Strip Slot High B Front Case Medium C Side Case High D Front Buttons High E Back Case Low l F Battery Cover Medium 34 Step 1 Clean
10. EASYMax LTC Long Term Care LTC Self Monitoring Blood Glucose System User s Manual Please read this User s Manual thoroughly before using this blood glucose meter Introduction Welcome to the EasyMax LTC Self Monitoring Blood Glucose SMBG System This system is dependable and easy to use utilizing a compact lightweight and portable meter that will aide you in monitoring your patients blood glucose levels Please read this manual thoroughly before you begin testing It provides you and your diabetes care team important information and step by step directions for use of the EasyMax LTC Self Monitoring Blood Glucose System Intended Use The EasyMax LTC Self Monitoring Blood Glucose Test System is intended for the quantitative measurement of glucose in fresh capillary whole blood samples drawn from the fingertip palm or forearm Testing is done outside the body In Vitro diagnostic use The EasyMax LTC Blood Glucose System can be used by a single patient or for multiple patient use in professional healthcare settings as an aid to monitor the effectiveness of diabetes control When used in Long Term Care Settings this system must be used with safety lancets The system is not to be used on neonates nor for the diagnosis of or screening for diabetes mellitus Important Safety Instructions In Long Term Care settings use only single use safety lancets and a new safety lancet should be used for each test All parts of th
11. OT TT ec cct 48 Chapter 1 Understanding Your Meter EasyMax LTC Blood Glucose Meter Test Strip Slot 3 Insert a test strip here Display Shows results patient numbers and messages Power Button Press to turn on off the meter and to confirm the setting Left Button Press to enter memory adjust setting and scroll through results Strip Ejector Push the strip ejector up to remove the strip Battery Door Flip open the battery door by pushing the tab in the direction of the arrow and pulling the door up Right gt Button Press to enter memories adjust setting and scroll through results 12 The EasyMax LTC Accessories EasyMax 15 Blood Glucose Test Strip Test Strip Bottle amp Control Solution Bottle Electrode Em KE Strip Insert Direction EASYMax 25 Blood Glucose Test Hand Hold Area pdfacturer EPS Bio Tee Jf No 706400008 Seu AOI a Reaction area u 4 K Blood collection Expiration Date area Inserting Batteries A 1 Open the battery door on the back of the meter by pushing the tab in the direction of the arrow and pulling the door up 2 Insert two AAA batteries The meter will beep to confirm the batteries are inserted correctly 3 Put the battery door back in place and snap it closed 14 Setting the Time Date and Medical record First Time Use Setting the current
12. ates control solution tests 18 About Control Solution Use only with EasyMax 15 test strips and EasyMax LTC or EasyMax NG meters Write the date you first open the Control Solution bottle on the label The control solution is good for three months from the date the bottle is opened or until the expiration date on the bottle whichever comes first Do not use a control solution that is past the expiration date The control solution can stain clothing If you spill it wash your clothes with soap and water Close the bottle tightly after every use Left over control solution should not be returned to the control solution bottle Store the bottle of control solution at room temperature between 36 F 86 F 2 C 30 C Do not freeze 19 Running a Control Solution Test You need the meter a test strip and control solution nro nen Lev Op 3 Place the meter on a flat surface like a table 4 Remove the control solution bottle cap and wipe the tip of the bottle with a tissue 1 Put a test strip into the meter in the direction of the arrow If the medical record function is on it 5 Squeeze the bottle until a does not matter which number 2 Press Left button to select tiny drop forms at the tip of you select because once it is the mode of Control Solution the bottle and place solution flagged as control solution it will and the icon of B flashes on top of bottle cap not be attached to that number
13. atment according to your facility s guidelines Although this message could be due to a test error it is safer to treat first and then do another test 42 Message What it means What to do The HF and thermometer icon appears Temperature is too high outside the required range of 50 F 104 F 10 C 40 C This alerts users that an incorrect result may occur if the test continues The LF and thermometer icon appears Temperature is too low outside the required range of 50 F 104 F 10 C 40 C This alerts users that an incorrect result may occur if the test continues Relocate the meter to a location with temperature between 50 F 104 F 10 C 40 C Relocate the meter to a location with temperature between 50 F 104 F 10 C 40 C 43 Chapter 6 Technical Information Specifications Brand name Range Response time Memory sets Operating condition Relative Humidity Storage and transportation condition Relative Humidity Blood sample Hematocrit Hct Power Battery life Display dimension Device dimension H x Wx D Weight Principles Software via USB EasyMax LTC Blood Glucose Meter 20 600 mg dL 5 seconds 480 test results 50 F 104 F 10 C 40 C R H lt 90 4F 122 F 20 C 50 C R H lt 90 0 6 uL Fresh blood from fingertip 20 6096 Alkaline Battery 2 ct Over 2000 tests 1 4 x 1 7 inches 35 0 x 43 0 mm
14. e kit are considered biohazardous and may transmit infection even if you have performed cleaning and disinfection Wash hands thoroughly with soap and water after handling the meter Follow Standard Precautions when using the meter and obtaining a sample A new pair of gloves should be worn by the user before testing each patient The meter should be disinfected after each use The EasyMax LTC Self Monitoring Blood Glucose Test System may be used for testing multiple patients when Standard Precautions and the disinfection procedures included in this manual are followed EasyMax LTC Blood Glucose Meter Accessories EasyMax 15 Blood Glucose Test Strips EasyMax 15 Level 1 Low Control Solution EasyMax 15 Level 2 Normal Control Solution User s Manual 2 AAA batteries For further information please see Biosafety in Microbiological and Biomedical Laboatories BMBL http www cdc gov biosafety publications bmbl5 Protection of Laboratory Workers From Occupationally Acquired Infections Approved Guideline Third Edition Clinical and Laboratory Standards Institute CLSI M29 A3 Guideline for Isolation Precautions Preventing Transmission of Infectious Agents in Healthcare Settings 2007 http www cdc gov hicpac 2007ip 2007isolationprecautions html FDA Public Health Notification Use of Fingerstick Devices on More than One Person Poses Risk for Transmitting Bloodborne Pathogens Initial Communication 2010 http
15. equency At least 9 cycles of cleaning per day and 1 cycle of disinfection per week will allow the user to use the device for 4 years The meter can sustain 20 000 cycles of cleaning and disinfection and the lancing device can sustain 14 600 cycles of cleaning and disinfection Cleaning Frequency 9 cycles day X 365 days year X 4 year product life 13 140 cycles of cleaning Disinfection Frequency 1 cycle week X 52 weeks year X 4 year product life 208 cycles of disinfections lt 20 000 validated cycles of cleaning and disinfection for the meter lt 14 600 validated cycles of cleaning and disinfection for the lancing device 4 year product life is for properly cleaning and disinfection After 4 years the meter must be replaced with a new meter 38 Maintenance and Testing Your meter needs little or no maintenance with normal use It automatically tests its own systems every time you turn it on and lets you know if something is wrong See Screen Messages and what to do about them To make sure the display is working properly turn off the meter Press and hold power button to see the complete display All the indicators should be clear and look exactly like the picture to the left If not please contact Customer Service at X Un A B 866 994 3345 UI IN La KA mg dL Le 39 Screen Messages And Troubleshooting Never make treatment decisions based on an error message If you have any concerns call the Customer Care Serv
16. formation EasyMax LTC SMBG System EasyMax 15 Level 1 Low Control Solution EasyMax LTC Blood Glucose Meter EasyMax 15 Level 2 Normal Control Solution EasyMax 15 Blood Glucose Test Strip Manufacturer EPS BIO TECHNOLOGY CORP No 8 R amp D RD IIl Hsinchu Science Park Hsinchu Taiwan 30077 Oak Tree Health warranty During the warranty period if your EasyMax LTC Self Monitoring Blood Glucose System does not work for any reason other than obvious abuse Oak Tree Health will replace it with a new system or an equivalent product free of charge Please call the Customer Care Service toll free at 866 994 3345 Eastern Standard Time Mon Fri 8 00AM 6 00PM P N 718063760 Rev A01 47
17. g a Control Solution Test 20 Understanding Control Solution Test Results sss eee emen nnns 22 Chapter 3 Testing Blood Glucose sese 24 Instructions for Using Safety Lancets See deben e tU eech Running a Blood Glucose Test with Blood frami Fingertip x 26 Understanding Test Results 2 2 neret eR ROME DR HIER e Een En 29 Unusual TestResullts 1 3 6 ee eret re eee eec eere get sade et Eegen ee eu 29 Chapter 4 Meter Memory Setup sse eee eee eee eee 30 Memory Storing Test Result 5 x nette daiya Ero sendy Ida de deer TO Te Vera 30 Viewing and Deleting Test Res lts nocte rhet etd uen dined IR PARE Lebe GR EROR PARA ES 31 Using With Your e Tei oin eR RR pae d et ees 32 Chapter 5 Maintenance and Troubleshooting eee eem nennen 33 Battery ue le 33 Cleaning and Disinfecting the EasyMax LTC Meter in LTC Gettmngs sese eee ee eee eee 34 Cleaning And Disinfection Freouency nennen a nene nnne aaas 38 Maintenance and Testing 2 2 1 5 cscs 1 eterne deseruit nce dn tp Harc Een Iced eed ede se dee ee sensdeceuecceedduacensucdiensstes 39 Screen Messages and Troubleshooting sseseen nennen eem enne nnnm nnne 40 Chapter 6 Technical Information s eee eee 44 Specifications erret e e CREER M RETE RU e ep eaa Ee rt ERE 44 Burrie 5 Q 45 Device Informiatlori 2 5 ne rtt ED ER DOE EE EES 48 V
18. ice toll free at 866 994 3345 Eastern Standard Time Mon Fri 8 00AM 6 00PM Message What it means What to do Humidified Used strips The meter has detected a problem with the test strip Low power The meter batteries do not have enough power to perform a test Repeat the test with a new strip and puncture site Refer to pages 26 28 for information on sample application Replace with new batteries 40 Message What it means What to do System error Replace the batteries first There may be a problem with the meter Refer to pages 14 and 33 If this error message appears again please contact Customer Service Memory Error Replace the batteries first If ERROR 005 appears again please contact Customer Service No result in memory You can still perform a blood glucose The test proceeds incompletely The test and get an accurate test result meter was unable to recall this result o e D 41 Message What it means What to do Insufficient Volume error The volume of blood or control solution is NOT enough Test result is higher than 600 mg dL The test result is lower than 20 mg dL Repeat the test with a new strip puncture site and enough blood control solution Refer to pages 26 28 for information on sample application Re check your glucose level If the glucose result is HI again follow your facility s procedures without delay This may require immediate tre
19. ing Instruction Clean first to remove any heavy soil left on the surface of the meter All blood and bodily fluids must be thoroughly cleaned from surfaces and objects before disinfection with a germicidal wipe Open unfold and use the first germicidal wipe to remove heavy soil Step 2 Disinfection Instruction After cleaning amp before using the meter again unfold a new wipe and thoroughly wet all meter surfaces including the strip port and the connection port Treated area must remain visibly wet for a full 2 minutes Use additional wipe s if needed to ensure a continuous 2 minute wet contact time Let the device air dry for 30 seconds Do W Make sure the meter is turned off during cleaning and disinfection W Keep test strip vial s tightly closed when performing cleaning and disinfection procedures the fumes from the disinfectant may affect the performance of the strips W After cleaning and disinfection please perform a physical appearance and performance check of devices W Always wear gloves when cleaning and testing Note Do Not Get any moisture into the test strip slot Spray any cleaning solution directly onto the meter Put the meter under water or liquid Pour liquid onto the meter After disinfection users gloves should be removed and hands should be thoroughly washed with soap and water before proceeding to the next patient 35 Performance check of the meter Check item After each cleaning
20. ood forms on the fingertip 9 Apply blood to the edge of the test strip f O Do not apply blood on top of the test strip 7 778 Be sure to get enough blood on strip to make it to the confirmation window 8 Touch the blood drop at the tip of the transparent window of the test strip Do not put blood on top of the strip Be sure to get enough blood on the strip s reaction zone Otherwise an error code will appear 27 EASYMax LTC 9 The meter starts to count down from 5 10 Push the Strip Ejector to eject the test strip seconds and then displays the test Properly dispose of both strip and lancet result 11 After discarding wash hands thoroughly with soap and water Rinse and dry thoroughly 12 Clean and disinfect the meter following the instruction in Chapter 5 13 Change gloves between patients 28 Understanding Test Results Expected Values The EasyMax 15 Blood Glucose test strips are plasma referenced and calibrated for easier comparison to lab results The American Diabetes Association recommends a post meal glucose level of less than 140 mg dL and a pre meal glucose of less than 100 mg dL American Diabetes Association Diagnosis and Classification of Diabetes Mellitus Position Statement Diabetes Care 34 Supp 1 S66 2011 Unusual Test Results If the results are inconsistent with your patient s symptoms please follow these steps 1 Run a control solution test Cha
21. pter 2 Control Solution Testing 2 Repeat a blood glucose test Chapter 3 Testing Blood Glucose 3 After running the quality control and retesting the patient if there are still concerns about the performance of the meter inform the Nursing Supervisor and follow your facility s procedure for cross checking results with the Laboratory or another glucose test method not another meter 4 For accuracy and precision data and for important information on limitations see the instructions that come with your test strips Note 1 Extremely high humidity may affect the test results A relative humidity above 90 may cause inaccurate results 2 Hematocrit below 20 may cause higher results Hematocrit above 60 may cause lower results 29 Chapter 4 Meter Memory Setup Memory Storing Test Results Your meter stores a maximum of 480 test results with the time and date of the test You can review them at any time When the memory is full the oldest result is dropped as the newest is added so it is very important to have the correct time and date set in the meter The memory function is necessary in order to transmit data to a central location separate software amp instructions are available and should not be used as a substitute for proper charting of patient data Note 1 Do not change therapy based on one individual result in memory 2 The memory is not lost when you replace the battery You do need to check that the time and
22. r s manual but your patient still has symptoms that don t seem to match their test results or if you have questions please call the Customer Care Service toll free at 866 994 3345 Eastern Standard Time Mon Fri 8 00AM 6 00PM Healthcare personnel should wash hands and change gloves between patients even if patient dedicated testing devices and single use lancing devices are used Note Warning for potential biohazard Healthcare professionals using this system on multiple patients should handle all products or objects in contact with human blood carefully to avoid transmitting viral disease even after cleaning Explanation of Meter Symbols Eo LTC ru mum D DD DODAD0 DOG DDD nua Na Vs IS Eal Medical Record No nnn Date M nnn DU UU on the left side DDD patient number L Cec Time PUT vIOY on the right side E Apply Control Solution KA Apply blood mg dL Unit H HK Result Message H Battery Insert a strip Temperature Table of Contents Chapter 1 Understanding Your Meter 12 EasyMax LTC Blood Glucose Meter 12 The EasyMax LTC Accessories oiii ed e ine Ee ie ue a aded Ce ed ance donee d does oe endis ce udine 13 Inserting Batterie rs 14 Setting the Time Date and Medical record 15 Using EasyMax 15 Blood Glucose Test Strips see eee eene 17 Chapter 2 Control Solution Test 18 When to Run a Control Solution Test 18 About Control Solution EE 19 Runnin
23. time and date on your meter is important if you use the meter memory EASYMax LTC rn nan D HD EU cut M 8909 D DD G 4A Oa 4A rls 1 Press 0 Power Button and hold the button until the meter turns on 2 Press gt Right button for 2 seconds to get into the setting The screen display flashes the last 2 digits of the year Press Left button or gt Right button to adjust the year and press Power Button to confirm the setting 15 4 Repeat step 3 to set the date and time 5 Press Left button or gt Right button to turn on off the The flashing field is the one you are function of medical record number and press Power currently setting Button to confirm the setting Note 1 When the function of M is on it allows you to keep testing records of multiple users separate by marking them from 001 999 REA 2 The meter defaults to the medical record function being UPP Press gt Right button to reset this function 16 Using EasyMax 15 Blood Glucose Test Strips Use only with EasyMax LTC or EasyMax NG Blood Glucose Meters EasyMax LTC Self Monitoring Blood Glucose System is a no code system and does not require test strip calibration EasyMax LTC Self Monitoring Blood Glucose System utilizes glucose dehydrogenase chemistry to avoid incorrect readings on patients receiving Oxygen therapy Run a control solution test every time you open a new box of s
24. trips See Chapter 2 Control Solution Testing After you take a test strip out of the vial tightly close the vial immediately to keep the test strips dry Use the test strip within three minutes after taking it out of the vial The strip is for single use only Do not reuse it When you open a new test strip vial check the expiration date The test strips are good for six months from the initial date the vial is opened or until the expiration date whichever comes first Record the date you first open the test strip vial in the designated spot on the vial Store the test strip vial and your meter in a cool dry place between 36 F 86 F 2 C 30 C Do not freeze Insert the test strip into the meter before applying blood or control solution Do not touch the test strip with wet hands Do not bend cut or twist the test strips 17 Chapter 2 Control Solution Testing When to Run a Control Solution Test Running the EasyMax 15 Control Solution Test will let you know that your meter and test strips are working properly You should run control solution tests If you are using a new EasyMax LTC Blood Glucose Meter When you open a new vial of EasyMax 15 test strips If you think the meter or test strips may be working incorrectly If the meter has been dropped If the results are lower or higher than expected and you have repeated the test with similar results When you practice the test procedure When your facility mand
25. trol test with properly stored strips Was the test strip vial capped tightly If it wasn t the strips could be humidified Replace the test strips Is the meter functioning well You can use control solution to verify the meter s functions Chapter 2 Is the control solution expired or contaminated Replace with new EasyMax 15 control solution to check the performance of your EasyMax LTC meter Were test strips and control solutions stored in cool dry places Repeat the control test with properly stored strips and or control solutions Did you follow the testing steps properly Read Chapter 2 Control Solution Testing and test again Stop using the meter if you continue to obtain inaccurate results Please contact the EasyMax Customer Care Service line at 866 994 3345 for further troubleshooting 23 Chapter 3 Testing Blood Glucose Instructions for Using Single Use Pressure Activated Safety Lancets Clean test site prior to use 1 Your patient should wash their hands with 2 Remove the protective cap from the soap and warm water Rinse and dry safety lancet thoroughly Note Used test strips and lancets are considered bio hazardous waste in accordance with U S amp local regulations and should be handled as if capable of transmitting infection Follow your healthcare facility s policies for the proper handling of bio hazardous materials and sharps disposal 24
Download Pdf Manuals
Related Search