Docking Digital CD Clock Radio For iPod and iPhone
Contents
1. 3 REPEAT ALL When the MODE Button is pressed 3 times the Repeat Indicator REPEAT will be shown steadily on the LCD Display The whole disc will be played continuously until the m Button is pressed 4 To cancel the REPEAT function press the MODE Button repeatedly until the Repeat Indicator REPEAT disappears from the LCD Display RANDOM PLAY MODE This feature allows the track on the disc to be played in a random order Random playback will not work during program playback 1 In stop or playback mode press the MODE Button repeatedly until the Random Indicator RANDOM appears on the LCD Display A track is picked at random and playback starts immediately 2 To cancel the random play function press the MODE Button again the Random Indicator RANDOM will disappear from the LCD Display Playback will continues on playing the current track 3 To stop playback press m once no matter the CD is in Play or Pause mode 4 To turn off the unit press the STANDBY Button once CD PROGRAMMED PLAY For both CDs and MP3 CDs up to 64 tracks can be programmed in your desired order The same track can be programmed more than once 1 In Stop mode press the ENTER MEMORY CLOCK ADJ Button once The Program Number P 01 will briefly appear on the Display Track No 00 and the Program Indicator MEMORY will appear and flash on the Display While the 00 and MEMORY are flashing press2. Adjust the sound level by pressing the VOLUME or VOLUME Buttons The Volume Level reading will be displayed and revert back to the FM mode in 3 seconds 4 To turn the JiMS 215i off press once The Display will become dim and the current time is displayed PLAYING AN APPLE iPod iPhone CHARGING YOUR APPLE DEVICE The JIMS 215i will charge your iPhone or iPod when it is properly docked on the 30 pin Docking Connector LISTENING TO MUSIC ON YOUR APPLE DEVICE The JIMS 215i works with all models of iPhone iPod touch iPod nano iPod Video and iPod classic up to 160GB 1 Turn the JIMS 215i on by pressing the STANDBY Button 2 Repeatedly press the FUNCTION Button on the JiMS 2151 if required until the Display shows IPOd 3 Dock your Apple device carefully and securely onto the 30 pin Docking Connector Note For iPhone and Pod touch please turn on and unlock your device and then for Pone select iPod and music for iPod before docking 4 After selecting your favorite song press the Play Pause m1 Button on the JiIMS 215i to play or pause 5 Press the Button to advance to next song Press and hold the Button during playback for fast forward searching within the song 6 Press the Htd Button to go to the starting point of current song or previous song Press and hold the Button during playback for fast backward search within the song 7 Press the VOLUME or VOLUME Buttons to adjust the volume output level Y
3. 7 Press bil to start program play and press mi to stop 8 Normally all the programmed tracks will be played through once and then stop However you may use the REPEAT function to repeatedly play a certain track Repeat 1 or all tracks in the program Repeat All You may also tap to go directly to other tracks ahead or tap He twice to go back to previous track s during program play 9 After programmed playback stops all the programmed tracks remain kept in the memory unless the CD Door is opened To restart programmed play first press the ENTER MEMORY CLOCK ADJ Button and then the Pil Button 10 To clear the program contents open the CD Door NOTES ON HANDLING COMPACT DISCS e Do not expose the disc to direct sunlight high humidity or high temperatures for extended periods of time e Discs should be returned to their cases after using e Do not attach label or seal to either side of the CD R RW disc It may cause a malfunction e Handle the Disc by its edge Do not touch the playing surface glossy side e Fingerprints and dust should be carefully wiped off the playing surface of the disc with a soft cloth Wipe in a straight motion from the center to the outside of the disc e Never use chemicals such as record cleaning sprays antistatic sprays or fluids benzene or thinner to clean compact discs ALARM OPERATIONS Your JIMS 215i provides Wake to iPod Radio CD or Alarm SETTING ALARM TIME Note Alarm time can
4. oo I He ss _ 16 T lt ETS a CSS 19 PUSH TO OPEN CLOSE 21 DOCK FOR iPod iPhone SNOOZE SLEEP DIMMER BUTTON STANDBY BUTTON FOLDER PRESET BUTTON SLEEP BUTTON FOLDER PRESET BUTTON FUNCTION BUTTON iPod AUX Tuner CD CLOCK ADJUST MEMORY ENTER ALARM BUTTON PLAY MODE BUTTON 0 iPod iPhone SKIP BACKWARD I lt RADIO TUNE CLOCK ADJUST BACKWARD ALARM MODE SELECT BACKWARD ALARM VOLUME ADJUDT 11 iPod iPhone SKIP FORWARD PB RADIO TUNE CLOCK ADJUST FORWARD ALARM MODE SELECT BACKWARD ALARM VOLUME ADJUDT 12 Hi MENU BUTTON 13 VOLUME BUTTON oe oY D eae 14 SYNC DISPLAY BUTTON 15 VOLUME BUTTON 16 iPod iPhone PLAY PAUSE MM BUTTON 17 CD DOOR 18 FM ANTENNA 19 AUX IN JACK 20 DC INPUT JACK 21 DOCK FOR iPod iPhone GETTING STARTED This JIMS 215i is designed to operate on the included AC Adaptor AC Adaptor Operation 1 Insert one end of the AC adaptor into the DC JACK on the back of JIMS 215i 2 Connect the AC plug of the AC adaptor to an AC 120V 60Hz power source Note Unplug the AC adaptor and disconnect the DC Jack when the JiMS 2151 is not in use for a long period of time oj Role SS Rc NOTE i The Clock has to be set the first time you plug the unit in ll The Clock is set to default in 12 Hour format mode iii The Clock can only be set in Standby mode Setting the Time For example to set the current time at AM 6 30 When you first plug the
5. AC adaptor into a 120V 60 Hz power outlet the clock display will light flashing 1 Press and hold the CLOCKADJUST Button until 12H appears and flashes in the Display The Display backlight will become brightened 2 Press the CLOCK ADJUST Button to confirm while 12H is flashing The hour digits flash to prompt for input NOTE To switch to 24H format press the Ik or gt P buttons once when 12H is flashing then press the CLOCK ADJUST Button to confirm and follow procedures below to set the current time 3 While the hour digits are flashing repeatedly press the Ht or rl buttons to select the correct hour digits O NOTE Make sure the hour is set so that AM or PM is displayed correctly There is a PM Indicator located underneath the Hour digit The displayed time is PM when the indicator is lit The displayed time is AM when the indicator is off 4 Press the CLOCKADJUST Button to confirm the hour setting 6 and the minute digits 00 will flash to prompt for input E J 5 While the minute digits 00 are flashing repeatedly press the I lt or gt P Buttons until the correct minute digits 30 are displayed x g 6 Press the CLOCK ADJUST button again to complete the clock setting The JiMS 215i will revert to STANDBY mode The Display backlight will become dim L mE ae ms NOTE e If the CLOCK ADJUST Button is not pressed while the hour or minute digit
6. Mode repeatedly press the ENTER MEMORY CLOCK ADJ Button until the number you want to replace is displayed Select a track as described as in procedure 2 to 3 above Press the ENTER MEMORY CLOCK ADJ Button to complete MP3 PROGRAMMED PLAY 1 In Stop mode press the ENTER MEMORY CLOCK ADJ Button once The Program Number P 01 will briefly appear on the Display Folder No F00 and the Program Indicator MEMORY will appear and flash on the Display co WENDET o 2 Press the Hitior gt gt Buttons to select the desired folder F02 while FOO and MEMORY are flashing 3 Press ENTER MEMORY CLOCK ADJ Button to confirm when the desired folder appears and blinks on the Display Track No 000 will blink on the Display cy MEMORY Pirin LILI 4 Select the track you want to program using the or gt gt Buttons while O00 is flashing and then press ENTER MEMORY CLOCK ADJ Button again to enter the track in memory For example the sixth track 006 is selected ni a A 5 The Program Number will advance to P 02 and briefly appear on the Display Folder No F00 and the Program Indicator MEMORY will appear and flash on the Display to prompt for another input 6 Repeat procedure 2 5 above to program up to 64 tracks Any attempt to program more than 64 tracks will result in first programmed number appears and discontinuance of the programming
7. This warranty is not assignable or transferable Our obligation under this warranty is the repair or replacement of the defective unit or any part thereof except batteries when it is returned to the SPECTRA Service Department accompanied by proof of the date of original consumer purchase such as a duplicate copy of a sales receipt You must pay all shipping charges required to ship the product to SPECTRA for warranty service If the product is repaired or replaced under warranty the return charges will be at SPECTRAS expense There are no other express warranties other than those stated herein This warranty is valid only in accordance with the conditions set forth below 1 The warranty applies to the SPECTRA product only while a It remains in the possession of the original purchaser and proof of purchase is demonstrated b It has not been subjected to accident misuse abuse improper service usage outside the descriptions and warnings covered within the user manual or non SPECTRA approved modifications c Claims are made within the warranty period 2 This warranty does not cover damage or equipment failure caused by electrical wiring not in compliance with electrical codes or SPECTRA user manual specifications or failure to provide reasonable care and necessary maintenance as outlined in the user manual 3 Warranty of all SPECTRA products applies to residential use only and is void when products are used in a nonresidential environ
8. make an empty folder It may not work properly e For the JiMS 215i the recommended recording setting is 128 kbps of fixing bit rate If files are recorded in other bit rate for example at 320 kbps or in variable bit rate track skid may sometimes happen according to the recording conditions 1 With the JiIMS 215i in power on mode press the Function Button repeatedly until CD is displayed The Player will start reading the TOC table of contents of the CD NO will appear on the Display if no disc is loaded 2 Open the CD Door by pulling the CD Door at where marked PULL OPEN Insert a disc in place with the label facing frontward and then close the CD door 4 The Player will start reading the disc rEAd blinks The total number of tracks on the disc will be shown on the Display after a few seconds a CD O 16 Total Tracks On CD Total Tracks On MP3 Note For an MP3 disc the time taken to read the TOC table of contents on the disc will be longer since it contains more songs 5 Press mas once The unit will start playing from the first track The PLAY Indicator gt and the elapsed playing time will appear in the Display CD Playback MP3 Playback Note For MP3 playback the current track no folder no and elapsed playing time will be shown on the Display one by one during playback 6 Press pas during playback to pause The PLAY Indicator track no and elapsed playing time flash in
9. only be set in POWER ON mode after the current time is set 1 To set the wakeup time press and hold the ALARM Button for approximately 2 seconds until the hour digit blinks and Alarm will light 2 When the hour digit blinks press the rea or gt Buttons to adjust your desired hour digit Note For the 12 Hour format Make sure the Hour is set so that AM or PM is correctly displayed There is a PM Indicator located underneath the Hour digit The displayed time is PM when the indicator is lit The displayed time is AM when the indicator is off 3 Press the ALARM Button to save the hour setting the minute digits will blink 4 When the minute digits blink press the te ore buttons to adjust your desired minute digit 5 Press the ALARM Button to save the wakeup setting SETTING THE WAKEUP MODE 6 Following step 5 above press the ALARM Button once to enter the wake up selection mode Note EUNE stands and for Wake to Radio Cd stands for Wake to CD IPOd stands for Wake to iPod iPhone and bU22 stands for Wake to Alarm i Wake to Radio Repeatedly press the me or Buttons until the Wake to Radio Indicator EUNE appears and blinks on the Display Press the ALARM Button again to enter the VOLUME setting mode The Volume Digit will blink on the Display Repeatedly press the me or ei Buttons until the desired Volume level 10 30 appears and blinks on the Display the
10. or lt cD MEMORY to select a track you want to program For example the first Lit track is selected Press the ENTER MEMORY CLOCK ADJ Button to confirm The first track is programmed The Program Number will advance to P 02 and briefly shown on the LCD Display Track No 00 and the Program Indicator MEMORY will flash on the Display to prompt for input Repeat steps 2 amp 3 to program more tracks Any attempt to program more than 64 tracks will result in first programmed number appears and discontinuance of the programming Press bil to start program play and press m to stop Normally all the programmed tracks will be played through once and then stop However you may use the REPEAT function to repeatedly play a certain track Repeat 1 or all tracks in the program Repeat All You may also tap to go directly to other tracks ahead or tap He twice to go back to previous track s during program play After programmed playback stops all the programmed tracks are retained in the memory until the CD Door is opened To restart programmed play first press the ENTER MEMORY CLOCK ADJ Button and then the Pll Button To resume to normal playback press the Pil Button once in the porgrammed play Stop mode To clear the program contents open the CD Door Changing a Track in the Program Memory In case you want to change the track in your programmed play proceed in the following 1 2 3 In programmed play Stop
11. player SPECIFICATIONS Power Requirement AC DC adaptor Input 120V 60 Hz Output 9 V 2500 mA Frequency 88 108 MHz Made for iPod and Made for iPhone mean that an electronic accessory has been designed to connect specifically to iPod and iPhone respectively and has been certified by the developer to meet Apple performance standards Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards Please note that the use of this accessory with iPod iPhone or iPad may affect wireless performance iPhone iPod iPod classic iPod nano iPod shuffle and iPod touch are trademarks of Apple Inc registered in the U S and other countries At Spectra environmental and social responsibility e is a core value of our business We are dedicated SPECTRA to continuous implementation of responsible Wan 2 initiatives with an aim to conserve and maintain the G AM environment through responsible recycling Please visit us at http www spectraintl com green htm for more information on Spectra s green initiatives or to find a recycler in your area 20 90 DAY LIMITED WARRANTY AND SERVICE VALID IN THE U S A ONLY SPECTRA MERCHANDISING INTERNATIONAL INC warrants this unit to be free from defective materials or factory workmanship for a period of 90 days from the date of original customer purchase and provided the product is utilized within the U S A
12. the iPhone time will always be current e The JIMS 215i SYNC function does not support earlier iPod models like iPod mini Pod 3G 4G and iPod photo 4G color display RADIO OPERATIONS TUNING THE RADIO 1 Press to turn on the unit The JiMS 215i will enter the iPod mode by default 2 To enter the TUNER mode press the FUNCTION Button twice The FM station frequency will appear on the Display 3 Repeatedly press the I lt or gt I Buttons until a station is received 4 To automatically search for stations with strong signals press and hold either the I lt or PPI Buttons for one second then release The tuner will stop on the first strong Station signal it finds The frequency reading of the tuned station will be displayed 5 Adjust the sound level by pressing the VOLUME or VOLUME Buttons The Volume Level reading will be displayed and revert back to the FM mode in 3 seconds NOTES eo Manual tune to select weaker stations that might be bypassed during the automatic tuning eo If the automatic tuning does not stop on the exact frequency of the station for example if it stops on 100 9 MHz instead of 100 8 MHz use the manual tuning method to fine tune to the exact frequency of the desired station o Ifa station is broadcasting in Stereo the unit will automatically receive the stereo broadcast and ST will be displayed Hints for the Best Reception To obtain the best FM Stereo reception unwrap and ful
13. the Display 7 Note When the mas Button is pressed during MP3 playback The PLAY Indicator gt will flash and the track number folder number and elapsed time will show one by one 8 To resume playback press was again The PLAY Indicator will appear steadily on the Display 9 To skip forward or backward tracks press the Skip Search gt gt e4 Buttons 10 For MP3 playback press the FOLDER or FOLDER Buttons to skip to next or 11 previous folder The first track no of the selected folder will be displayed 11 To stop playing briefly press the m Button REPEAT AND RANDOM PLAY To select the desired playback mode press the MODE Button before or after playing the disc Every time you press the MODE Button the following playback function will be selected consecutively and executed For CD Repeat 1 Repeat All Random Play Normal Play For MP3 Repeat 1 Repeat folder Repeat All Random Play Normal Play REPEAT PLAY MODE 1 REPEAT 1 When the MODE Button is pressed once the Repeat Indicator REPEAT will be shown and flash on the LCD Display This single track of music will be played repeatedly until the m Button is pressed 2 REPEAT FOLDER For MP3 Disc When the MODE Button is pressed twice the Repeat Folder and Repeat Indicator 7 and REPEAT will be shown with 7 flashing on the LCD Display The whole folder will be played continuously until the m Button is pressed
14. use an adaptor to make the plug fit into your outlet This defeats the safety feature and could expose you to electric shock Only use attachments accessories specified by the manufacturer Unplug this apparatus during lightning storms or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped This appliance shall not be exposed to dripping or splashing water and that no object filled with liquids such as vases shall be placed on the apparatus Power Sources The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance Do not overload wall outlet Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type There is a high energy rechargeable battery inside the speaker box do not throw it into fire to avoid danger of explosion Do not charge the internal rechargeable battery longer than specified to prevent danger of fire Overcharging rechargeable batteries may shorten their life span 19 Do not attempt to dismantle open or repair this product yourself If a fault occurs seek advice from your local quali
15. Alarm time and then revert to the current function mode Press the STANDBY Button to turn JiMS 215i off The alarm will beep when the set Alarm time is reached Note i The Alarm Indicator will blink when the alarm time is reached and keep on sounding continuously until the JiMS 215i is powered off by pressing the Button li If you have chosen the Wake to RADIO alarm mode make sure that you have tuned to a station and adjusted the volume to a comfortable level iii The volume level except the beeping alarm can be re adjusted after waking up SNOOZE FUNCTION When the alarm time is reached and the alarm is sounding press the SNOOZE Button once The alarm sound will stop and resume after 9 minutes TURNING ALARM ON OFF With the JIMS 215i in POWER ON and ALARM mode 1 Briefly press the ALARM Button once to deactivate the alarm function The Alarm Indicator ALARM will disappear on the Display 2 Press the ALARM Button again to activate the alarm function The chosen wakeup time and Wakeup mode will be displayed on the Display for a few seconds after that the Display will revert to show the current mode The Alarm Indicator ALARM will appear steadily on the Display SLEEP TIMER The sleep timer allows you to turn the unit off after a designated time is reached You can use the SLEEP Timer to fall asleep to Radio CD or iPod iPhone for 120 90 60 30 or 15 minutes intervals 1 Turn the JIMS 215i
16. JENSEN Docking Digital CD Clock Radio For iPod and iPhone Made for iPod iPhone USER MANUAL JIMS 2151 iPod iPhone Not Included PLEASE READ THIS OPERATING MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE DEAR JENSEN CUSTOMER Selecting fine audio equipment such as the unit you ve just purchased is only the start of your musical enjoyment Now it s time to consider how you can maximize the fun and excitement your equipment offers This manufacturer and the Electronic Industries Association s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level One that lets the sound come through loud and clear without annoying blaring or distortion and most importantly without affecting your sensitive hearing Sound can be deceiving Over time your hearing comfort level adapts to higher volumes of sound So what sounds normal can actually be loud and harmful to your hearing Guard against this by setting your equipment at a safe level BEFORE your hearing adapts To establish a safe level e Start your volume control at a low setting e Slowly increase the sound until you can hear it comfortably and clearly and without distortion Once you have established a comfortable sound level eo Set the dial and leave it there Taking a minute to do this now will help to prevent hearing damage or loss in the future After all we want you l
17. aler or an experienced radio TV technician for help CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment PROTECT YOUR FURNITURE This model is equipped with non skid rubber feet to prevent the product from moving when you operate the controls These feet are made from non migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture However certain types of oil based furniture polishes wood preservatives or cleaning sprays may cause the rubber feet to soften and leave marks or a rubber residue on the furniture To prevent any damage to your furniture we strongly recommend that you purchase small self adhesive felt pads available at hardware stores and home improvement centers everywhere and apply these pads to the bottom of the rubber feet before you place the product on fine wooden furniture PRODUCT FEATURES The JiMS 215i is an iPod iPhone Docking Digital CD Clock Radio that incorporates the following features Play and Charge your iPod nano iPod touch iPod classic iPod video and iPhone Vertical Front Loading MP3 CD Player FM digital tuner with 20 presets Auxiliary input jack Digital volume control Alarm clock function Wake to Radio CD Alarm or your iPod iPhone Snooze function Sleep timer function Time synchronization LOCATION OF CONTROLS 5 6789101112 13
18. and in the operating instructions should be adhered to Follow all instructions All operation and use instructions should be followed Do not use this apparatus near water The appliance should not be used near water for example near a bath tub washbowl kitchen sink laundry tub in a wet basement or near a swimming pool Clean only with dry cloth The appliance should be cleaned only as recommended by the manufacturer Do not block any ventilation openings Install in accordance with the manufacturer s instructions The appliance should be situated so that its location or position does not interfere with its proper ventilation For example the appliance should not be situated on a bed sofa rug or similar surface that may block the ventilation openings or placed in a built in installation such as a bookcase or cabinet that may impede the flow of air through the ventilation openings Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus The system has as AC plug and will only fit into matching AC outlets This is a safety feature to reduce the possibility of electric shock If the plug will not fit in your AC outlets you should have the outlet changed by qualified licensed electrician Do not
19. e in the dock Please make sure your iPod iPhone is working properly before docking into the unit Please refer to your iPod iPhone manual for details on resetting iPod iPhone is locked up frozen iPod iPhone battery has problem Weak FM FM antenna wire is not Extend or reposition the wire antenna for best reception fully extended reception CD player will Unit not in CD function Select CD function mode not play mode CD is not loaded Load CD with label side up properly If the CD is self Use better quality blank media and retest compiled the media used may not be compatible with the player CD skips while Disc is dirty or Wipe CD with clean cloth or use another disc playing scratched Dirty or defective disc Clean or replace the defective disc Dirty pick up lens Use a CD lens cleaning disc to clean the lens Player is subject to Relocate the player away from shock or excessive shock or vibration vibration Volume level is set too high Decrease the volume If the iPod iPhone original sound source is of Sound is poor quality distortion and noise are easily distorted noticed with high power speakers Try a Sound source is distorted different audio source such as a music CD If you are using an external sound source like older generation of iPod try reducing the output volume on the device itself Also try turning bass boost OFF or change the EQ setting Intermittent sound from CD
20. er your information http www spectraintl com wform htm Printed in China 21
21. fied service technician or contact the distributor via the telephone number at the back of this instruction manual 20 The nameplate is located on bottom of product IMPORTANT NOTES Avoid installing the unit in locations described below e Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters e Places subject to constant vibration e Dusty humid or moist places CAUTION CLASS 1 LASER PRODUCT CAUTION CLASS 1 LASER PRODUCT INVISIBLE LASER RADIATION APPAREIL LASER DE CLASSE 1 WHEN OPEN AND INTERLOCKS PRODUCTO LASER DE CLASE 1 DEFEATED AVOID EXPOSURE TO BEAM This product contains a low power laser device Follow the advice below for safe operations ON PROTECTION AGAINST LASER ENERGY EXPOSURE e As the laser beam used in this compact disc player is harmful to the eyes do not attempt to disassemble the casing e Stop operation immediately if any liquid or solid object should fall into the cabinet e Do not touch the lens or poke at it If you do you may damage the lens and the player may not operate properly e Do not put anything in the safety slot If you do the laser diode will be ON when the CD door is still open e Ifthe unit is not to be used for a long period of time unplug the unit and disconnect the AC adaptor power plug from the AC outlet e This unit employs a laser The use of controls or adjustment or performance of procedures other than those specified here may
22. istening for a lifetime We Want You Listening For a Lifetime Used wisely your new sound equipment will provide a lifetime of fun and enjoyment Since hearing damage from loud noise is often undetectable until it is too late this manufacturer and the Electronic Industries Association s Consumer Electronics Group recommend you avoid prolonged exposure to excessive noise Customer s Record The serial number of this product is found on its bottom cover You should note the serial number of this unit in the space provided as a permanent record of your purchase to aid in identification in the event of theft of loss Model Number JiMS 2151 Serial Number IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner this unit has been designed and manufactured to ensure your personal safety However improper use can result in potential electrical shock or fire hazards Please read all safety and operating instructions carefully before installation and use and keep these instructions handy for future reference Take special note of all warnings listed in these instructions and on the unit 1 2 OV 10 11 12 13 14 15 16 17 18 Read these instructions All the safety and operating instructions should be read before the appliance is operated Keep these instructions The safety and operating instructions should be kept for future reference Heed all warnings All warnings on the appliance
23. ly extend the FM Antenna and adjust the position of the wire for best station reception STORING THE RADIO STATION PRESETS The JIMS 215i allows you to store up to 20 FM stations for easy recall at any time 1 In FM mode tune to the radio station you want to store in memory using the Hd or F Buttons as described above 2 Press the ENTER MEMEORY CLOCK ADJUST Button once the preset channel number P 01 and MEMORY will appear with 01 and MEMORY flashing on the display TUNER MEMORY ri it Lt 1 FM 3 To change the preset channel number location press the FOLDER PRESET or FOLDER PRESET Buttons to step through the preset locations P 01 P 20 For example preset channel number P 10 is selected 4 To confirm the preset location press the ENTER MEMORY CLOCK ADJUST Button again The station at 103 2 MHZ is stored in preset channel number 10 5 To store up to 20 FM station presets repeat steps 1 to 4 above Note You can overwrite a preset station by storing the new frequency in its place RECALL PRESET RADIO STATIONS 1 Set the JiMS 215i to the Tuner mode 2 Repeatedly press the FOLDER PRESET or FOLDER PRESET Buttons to recall the preset stations Stop pressing until the desired preset channel number appears on the Display The Display will show the preset channel number briefly and then revert to show the frequency of the preset radio station TUNER TUNER 3
24. ment or installed outside the United States This warranty gives you specific legal rights and you may also have other rights which vary from state to state TO OBTAIN SERVICE please remove all batteries if any and pack the unit carefully and send it freight prepaid to SPECTRA at the address shown below IF THE UNIT IS RETURNED WITHIN THE WARRANTY PERIOD shown above please include a proof of purchase dated cash register receipt so that we may establish your eligibility for warranty service and repair of the unit without cost Also include a note with a description explaining how the unit is defective A customer service representative may need to contact you regarding the status of your repair so please include your name address phone number and email address to expedite the process IF THE UNIT IS OUTSIDE THE WARRANTY PERIOD please include a check for 40 00 to cover the cost of repair handling and return postage All out of warranty returns must be sent prepaid It is recommended that you contact SPECTRA first at 1 800 777 5331 or by email at custserv spectraintl com for updated information on the unit requiring service In some cases the model you have may be discontinued and SPECTRA reserves the right to offer alternative options for repair or replacement SPECTRA MERCHANDISING INTERNATIONAL INC 4230 North Normandy Avenue Chicago IL60634 USA 1 800 777 5331 To register your product visit the link on the website below to ent
25. n press the ALARM Button to complete the setting Press the STANDBY Button to turn the JIMS 215i off The Radio will come on when the set Alarm time is reached li Wake to CD Repeatedly press the me ore Buttons until the Wake to CD Indicator Cd appears and blinks on the Display Press the ALARM Button again to enter the VOLUME setting mode The Volume Digit will blink on the Display Repeatedly press the ea or pei Buttons until the desired Volume level 10 30 appears and blinks on the Display then press the ALARM Button to complete the setting Press the STANDBY Button to turn the JIMS 215i off The Radio will come on when the set Alarm time is reached iii Wake to iPod iPhone Repeatedly press the a or pei Buttons until the Wake to iPod Indicator IPOd appears and blinks on the Display Press the ALARM Button again to enter he VOLUME setting mode The volume digit will blink on the Display Repeatedly press the mt or buttons until the desired Volume level 10 30 appears and blinks on the Display then press the ALARM Button to complete the setting Press the STANDBY Button to turn JiMS 215i off The iPod iPhone will play when the set Alarm time is reached iv Wake to Alarm bU22 Repeatedly press the mew or Buttons until the ALARM Indicator bU22 appears and blinks on the display Press the ALARM Button again to confirm The Display will show the chosen
26. on and then play your favorite CD or dock your iPod iPhone or tune to the desired radio station and set the volume to a comfortable level 2 Press the SLEEP button The display will show 120 minutes of playing time and then return to the current function mode CD iPod or FM mode in a few seconds The JiMS 215i will automatically turn off after 120 minutes has elapsed 3 Press the SLEEP Button repeatedly to select a sleep time The unit will play for the selected length of time then automatically turn off 5 To turn the unit off before the selected length of time press and hold the STANDBY Button at any time AUXILIARY INPUT The JIMS 215i features an auxiliary audio signal input jack for connecting external audio devices like MP3 players CD players and older non dockable iPods except iPod shuffle 3 gen and listen to your external source through the speakers of this system 1 Use an audio cable not included with one 3 5 mm stereo plug on each end of the cable 2 Plug one end into the AUX IN Jack on the JiMS 215i and the other end of the cable into the Line out Jack or Headphone Jack of your external audio device 3 Turn on the external audio device 4 To select auxiliary audio input first press the STANDBY Button to turn the JiMS 215i on and then repeatedly press the FUNCTION Button until AUX is displayed 5 Adjust the volume control on the JIMS 215i Operate all other functions on the auxiliary device as us
27. ou can also 8 Repeatedly press the MENU Button to navigate through the folders like Playlists Artists Songs Albums and etc 9 Press the FOLDER PRESET or FOLDER PRESET Buttons to select the desired item 10 Press the ENTER Button to start playback 11 Playback will be suspended if there is an incoming call The iPhone will ring 12 Touch the Answer icon on the iPhone once to pick up the call 13 Touch the Speaker Button on the iPhone once to answer the call in handsfree mode 14 Press the End Call Icon on the iPhone when you have finished answering the call Music will resume 15 Press and hold the Button until your iPhone iPod turns off 16 Press the STANDBY Button to turn the JIMS 215i off Note e Adjust the built in preset EQ of your Apple device to fine tuning the sound quality to suit your needs The volume control slider on your iPhone or iPod touch are disabled when docked e Your Apple device will be charged as long as it remains docked The JiMS 2151 will not only play commercial CDs but it also plays CD R RW discs e Because of the non standardized format definition production of CD R RW playback quality amp performance is not guaranteed e Manufacturer is not responsible for the playability of CD R RW due to recording conditions such as PC performance writing software media characteristics etc e The CD R RW that has no music data or non MP3 files cannot be played back e Do not
28. result in exposure to hazardous radiation Should any trouble occur remove the power source and refer servicing to qualified personnel COMPLIANCE WITH FCC REGULATIONS This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user iS encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the de
29. s are flashing the JIMS 215i will exit the clock setting mode and revert to Standby mode The Display will show flashing The clock needs to be adjusted from the beginning e When the JiIMS 215i is powered on whenever you want to view the current time simply press the SYNC DISPLAY Button once The Display will show the current time and resume to current function mode in 10 seconds TIME SYNCHRONIZATION The JiMS 215i features a SYNC Button that allows you to set the time using the internal clock of the iPod iPhone 1 With the JIMS 215i in iPod mode dock an iPod iPhone onto the 30 pin connector on the JIMS 215i The authentication process will start and complete in a few seconds The Display will show AUEH during authentication and reverted to iPod mode in a few seconds 2 After completion of the authentication process press and hold the SYNC DISPLAY Button until SYNC appears on the Display The time of JIMS 215i will be Sync d with the iPod iPhone time NOTE e An iPod iPhone can only sync time up to the nearest minute it s possible to have up to 59 seconds difference between the clock radio and synced iPod iPhone e The iPod internal clock is automatically updated when synced with iTunes We recommend you sync the iPod with iTunes prior to docking to the JiIMS 215i to make sure you have the most current time available e The iPhone receives constant updates from the phone service provider so
30. ual Note 1 If you connected the Line Out Jack of your external device then you only need to adjust the volume control on the JIMS 215i If you connected the Headphone Jack of your external device then you may need to adjust both the volume control of your external device and the volume control of this system to find the most desirable volume setting 2 Press the STANDBY button to turn off the JiMS 215i when you finish listening Don t forget to switch off the power of your external device as well 17 CARE AND MAINTENANCE 1 Avoid operating your unit under direct sunlight or in hot humid or dusty places Keep your unit away from heating appliances and sources of electrical noise such as fluorescent lamps or motors 3 For better Clock Display clarity avoid operating the unit under direct sunlight or in strong room illumination 4 Unplug the unit from the electrical power outlet immediately in case of malfunction CLEANING THE UNIT e To prevent fire or shock hazard disconnect your unit from the AC power source when cleaning e The finish on the unit may be cleaned with a dust cloth and cared for as other furniture Use caution when cleaning and wiping the plastic parts Ifthe cabinet becomes dusty wipe it with a soft dry dust cloth Do not use any wax or polish sprays on the cabinet If the front panel becomes dirty or smudged with fingerprints it may be cleaned with a soft cloth slightly dampened with a mild soap and
31. water solution Never use abrasive cloths or polishes as these will damage the finish of your unit CAUTION Never allow any water or other liquids to get inside the unit while cleaning TROUBLESHOOTING GUIDE If you experience difficulties in the use of this Docking System please check the following or call 1 800 777 5331 for Customer Service and Support Symptom Possible Problem Solution AC Adaptor is not plugged into a wall outlet or the Plug the AC adaptor into a wall outlet and The unit does connector is not plugged plug the connector into the supply jack on the not respond no into the power supply jack unit power on the back of the unit Wall outlet is not Plug another device into the same outlet to functioning confirm the outlet is working Remove your iPod iPhone from the dock and iPod iPhone is not check for obstruction on the connectors in the iPod iPhone installed properly dock and on your iPod iPhone Then reseat it does not on the dock respond to the Please make sure that your iPod iPhone is system Your iPod iPhone is working properly before docking into the unit locked up Please refer to your iPod iPhone manual for info on resetting the iPod iPhone ea e OTTAR Select other modes for iPod charging Remove your iPod iPhone from the dock and iPod iPhone is not check for obstruction on the connectors in the iPod iPhone installed properly dock and on your iPod iPhone Then reseat it does not charg
Download Pdf Manuals
Related Search