USER`S MANUAL PID 10529
Contents
1. tap 2 Remove the center screw from the faceplate of the wall outlet Leave the faceplate in place 3 Using the included security screw and a Philips screwdriver secure the power tap to the wall outlet Tighten but do not overtighten 4 Align the tabs on the faceplate and snap it back into place on the power tap 4 SAFETY WARNINGS This product is for indoor dry use only It should not be used for aquariums or other water related devices The power tap must be plugged directly into a wall outlet Do not plug it into another Surge protector or power strip Do not exceed the rated electrical levels Doing so could cause the wiring in the wall outlet to overheat which could start a fire This device is intended to protect your electrical equipment from voltage and current spikes and other anomalies It is not a lightning arrestor and will not provide full protection in the event of a lightning strike2. mMoVvoreice 3 Outlet Wall Mount Surge Protector with Coax Protection USER S MANUAL PID 10529 V1 0 May 8 2013 TABLE OF CONTENTS eo oe B SPECIFICA TON SNB TION Kc spa irm 1 FEATURES e Includes three protected power outlets e Includes coaxial protection for use with satellite antenna or cable TV lines e Provides superior surge protection and EMI RFI filtration e Uses X3 Metal Oxide Varistor technology e Includes thermal fuses to protect against excessive heat and fire 90 rotating design for the coaxial connection and the lower power outlet e LED indicates when the surge function is operating properly 2 SPECIFICATIONS Electrical Rating 15A 120V 60Hz 1800 Watts Surge Lines Protected 3 Line L N L G N G UL Clamping Voltage L N 400V L G 400V N G 400V Surge Energy Joule Rating 1080 Joules Maximum Spike Current 72 000 Amps 3 Line Total Response Time 1 Nanosecond Max Spike Voltage 6 KV EMI RFI Noise Filter Yes Frequency 150KHz 100MHz Attenuation Up to 40dB DSS Coax Cable Line Protection Yes Surge Arrestor Gas Tube Breakdown Voltage lt 75V Insertion Loss 0 1 dB 3 INSTALLATION For long term use it is best to secure the power tap to the wall outlet To do so perform the following steps 1 Insert a small flat screwdriver into the slot at the bottom of the faceplate and carefully pry the faceplate loose from the power
Download Pdf Manuals
Related Search