Nikon AF-S VR Micro-Nikkor ED 105mm F2.8G(IF
Contents
1. SEAcSEA ITH A GEAT Mounting Removing the Camera to from the Housing 31 L Instruction Manual Mounting Housing inside front case Gearwheel Thank you for purchasing SEA amp SEA products 1 Attach the DX Macro Port Base 30105 DX Macro Port 50 30106 Please read this instruction manual carefully prior to using this product Only with a thorough understanding of this manual s content will you to the housing first be able to use the product correctly After reading the manual please be sure to keep it in a place where you can easily come back to it at any time Precautions Failure to heed the precautions listed below could result in serious consequences To prevent injury damage to yourself and or others please observe the precautions as they contain highly important information related to personal and product safety AN CAUTION Situations that could result in property damage or personal injury Set the switches on the lens to the appropriate selections for your shooting condition 2 3 Rotate the focus gear on the lens to align the yellow indicators to the gearwheel inside the housing 4 The gearwheel can only be passed in between the yellow indicators Carefully slide the camera forward into the housing while avoiding contact with the focus gear Fig 4 AN CAUTION Always make sure the focus gear and the gearwheel are properly Focus gear d aft inath o henu on the lens Carefull2. sure the O ring pieces inside the focus gear the focus gear DX D70 DX S5Pro lens tip as shown in Fig 2 fh do not come out of the grooves when detaching the focus AN CAUTION gear from the lens eDo not mount remove the camera without aligning the yello s and the gearwheel because this may result in damage to the camera housing lens Camera Fig 5 Specifications Construction Corrosion resistant aluminum alloy or focus gear Dimensions DIAxD Approx 695 x 91mm 3 8 x 3 6inch Refer to the each port instruction manual for installation Weight Approx 158g 5 50z Accessories Focus gear A Focus gear B Screws 3 pcs 1 spare Screw driver O ring SeAcSEA SEA amp SEA SUNPAK Co Ltd Gear sheet stick on 3 2 20 Saiwai cho Kawaguchi shi Saitama Japan 332 0016 TEL 81 48 256 2251 The specifications and appearance are subject to change without notice http www seaandsea jp World Customer Service Center TEL 81 48 255 8512 Current as of May 2012
3. ment or compensation for cameras lenses or those anaes because this may result in damage to the camera housing lens e Do not force the lens into the gear when the interlocking is ae eeeOnice a oun vad eperanen alice too tight because this may result in damage to the lens Use supplied screws to securely mount gears in order to prevent e Refer to the each port instruction manual for installation When too damage dropping or loss and aid l SEA amp SEA SUNPAK Co Ltd assumes no liability for compensation Replace the O ring with the thicker O ring that was also supplied of loss of captured images or expenses caused by loss of images with this product If it becomes too tight with the thicker even if you are unable to shoot due to a product defect or malfunction A CAUTION E O ring adjust the interlocking tightness as explained above Those four housing have different mounting procedure Attach the DX Macro Housing inside front case Port Base 30105 DX Macro Port 50 30106 to the housing at the last Mounting Gearwheel Port This product is designed for manual focus operation utilizing the This product should be used in combination with the DX Macro DX Macro Port Base 30105 focus zoom dial on SEA amp SEA digital SLR camera housings Port Base 30105 DX Macro Port 50 30106 1 Set the switches on the lens to the appropriate selections for your l ake shooting condition a DX Macro Port 30 30106 SNL How to At
4. tach to the Lens 2 Rotate the focus gear on the lens to align the yellow indicators to ES the gearwheel inside the housing Attach focus gear A to the lens first then attach 2 Align the cutout parts focus gear B in parallel alignment with the lens on focus gearsA amp gt c 3 The gearwheel can only be passed in between the yellow as shown in Fig 1 B and firmly attach s utout part indicators Carefully slide the camera forward into the housing both gears with 3 VY while avoiding contact with the focus gear Fig 5 screws included in 4 Attach the DX Macro Port Base 30105 DX Macro Port 50 30106 the package using ri to the housing Fig 5 the supplied screw A e Always make sure the focus gear and the gearwheel are properly driver as shown in S engaged after mounting the camera to the housing Focus gear on the lens Fig 3 Removin ae Mount the lens with the focus gear attached to the g o Focus gear A camera 7 Remove the Port from the housing first ze Push d f Amii E Always make sure that the lens with the focus gear 2 Rotate the focus zoom dial on the housing to align the yellow senna Son eee amp works properly after attaching the lens to the camera indicators to the gearwheel Housing Set focus gear A to a position 5 AN CAUTION __ 3 Carefully slide the camera toward you while avoiding contact with DX D200 DX D50 that is approx 12mm from the lt e Please make
5. y observe the instruction manual for the compatible lens If it is still too loose use the gear sheet which is included in a gece erin ar egy ane Hereteon eae p for this product before use the package Cut the sheet into 3 to 6 pieces with scissors 2 ort This product includes an O ring divided into pieces for and apply them between the grooves inside the gear emoving DX Macro Port Base 30105 interlocking the lens and the gear In some cases the interlocking e The thicker O ring may not be compatible with some lenses 7 Rotate the focus zoom dial on the housing to align the yellow DX Macro Port 50 30106 may be too tight or loose when attaching focus gear A due to due to size restrictions In this aw adjust the tightness by indicators to the gearwheel Fig 4 deviation in the lens diameter following the above procedure D and using the gear sheet n l included in the package 2 Carefully slide the camera toward you while avoiding contact with When too tight the focus gear Remove the O ring pieces from inside the gear and cut them pa e sure that the gear and the lens work properly after A CAUTION shorter with scissors Re insert these pieces into the grooves e o Ea E inside the gear providing ample space between the pieces SEA amp SEA SUNPAK Co Ltd will not be responsible for the e Do not mount remove the camera without aligning the yellow indicators and the Adjust the length of the O ring pieces for appropriate tightness replace
Download Pdf Manuals
Related Search