Home

VIZIO D39h-C0 LED HDTV User Manual

1. USB PORT 2 Press the V button on the remote 3 Use the Arrow buttons to highlight the Multimedia app in the V I A Plus Dock and press OK The highlighted App is in the center of the dock 4 Use the Arrow buttons to highlight the type of media to display Music Video or Photo and press OK 5 Use the Arrow buttons to highlight the file you want to display Press OK Music or video files play photos display Nac You can display your photos in fullscreen Select the Os photo press OK then highlight Fullscreen and press OK Removing the USB Drive from the TV Do not remove the USB thumb drive while the TV is on Doing so may damage the drive Preparing Your USB drive to Play USB Media To play USB media you must first save your filles on a USB thumb To safely remove your USB drive from the TV drive The USB thumb drive must be formatted as FAT32 1 Turn off the TV Files on the USB thumb drive must end in a supported file 2 Disconnect your USB thumb drive from the USB port on the extension mMp3 jpg etc side of the TV The player is not designed to play media from smartphones 48 Back Button Highlight this button and press OK to return to the previous screen Connected Sources Displays connected USB devices Current Folder Start Fullscreen Slideshow Sort by Name or Date View Thumbnails Folders Back Button Highlight and press OK to return to left column Current Folder Displays
2. Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over Unplug this apparatus during lightning storms or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus
3. press OK The TV scans for the channel When the TV is done scanning for the channel press the EXIT button on the remote VIZIO La ADD ANALOG CHANNEL Enter Channel _ Add Channel Skipping Channels After a channel scan is completed you may find that some channels are too weak to watch comfortably There may also be some channels you do not want to view You can remove these channels from the TV s memory with the Skip Channel feature Channels that have been removed with the Skip Channel feature can still be viewed if the channel A is entered using the Number Pad If you wish to completely block a channel from being viewed use the parental controls See Locking and Unlocking Channels on page 42 To remove a channel 1 From the CHANNELS menu highlight Skip Channel and VIZIO A press OK The SKIP CHANNEL lt SKIP CHANNEL menu is displayed 1 Test 0 O v 2 For each channel you wish is to remove use the Up Down 5 aaa O Arrow buttons on the remote SET to highlight the channel and press OK A Y appears to the RE A right of each channel you select 3 When you have selected all of the channels you wish to remove press BACK to adjust additional settings or EXIT NW 35 LISTENING TO ALTERNATE AUDIO Changing the Analog Audio Language Some analog over the air free and cable channels broadcast programs in more than one language The TV s Analog Audio feature allows you to listen to audio in an al
4. Digital 0 Analog 19 18 Complete Cancel Cancel the channel scan ow _6 Adding New Channels Occasionally you may need to add a new range of channels or add a new analog channel You can do this by using the Partial Channel Scan and Add Analog Channel options This is quicker than scanning all possible channels To add a range of new channels 1 From the CHANNELS menu highlight Partial Channel Search and press OK The PARTIAL CHANNEL SEARCH menu is displayed 2 Highlight Scan Mode and select the type of channel you are adding Analog Digital or Analog Digital 3 Highlight From Channel and type the channel where you want to begin the scan Use the left Arrow button to backspace Use the Number Pad on the remote to type the channel 4 Highlight To Channel and enter the channel where you want to end the scan Use the left Arrow button to backspace Use the Number Pad on the remote to enter the channel 5 Highlight Start and press OK The partial channel search begins 6 Wait until the partial channel search is 100 complete Highlight Done and press OK 7 Press the EXIT button on the remote 34 To add a single new analog channel 1 From the CHANNELS menu B highlight Add Analog Channel and press OK The ADD ANALOG CHANNEL menu is displayed Highlight Enter Channel and use the Number Pad on the remote to type the number of the channel to be added Highlight Add Channel and
5. Saturation 5 4 0 2 0 Brightness 24 0 20 0 0 0 Offset 0 0 0 Gain 0 0 0 3 Use the Arrow buttons on the remote to highlight the Hue Saturation Brightness these 3 adjust the color Offset or Gain these two adjust the color temperature of the color you wish to adjust Press the OK button 4 Use the Left Right Arrow buttons to adjust the value When you are finished press the OK button to save the setting 5 When you have finished adjusting the Color Tuner settings press the BACK button to adjust additional settings or EXIT Changes to Hue Saturation and Brightness are indicated with an asterisk on the Picture Mode setting Changes to Offset and Gain are indicated with an asterisk on the Color Temperature setting To turn color channels off and on i Use the Arrow buttons on the remote to highlight Red From the PICTURE menu use the Arrow buttons to highlight Color Calibration and press the OK button The COLOR CALIBRATION menu is displayed Use the Arrow buttons to highlight Color Tuner and then press the OK button The Color Tuner menu is displayed lt j Color Tuner gt Red Green Blue Cyan Magenta Yellow Hue 0 0 0 0 25 14 Saturation 5 4 0 2 0 Brightness 24 0 22 0 0 0 Offset 0 0 0 Gain 0 0 0 A Green or Blue Press the OK button to turn the color channel off or on An X appears over a color channel that has been turned off Use the Arrow buttons to highlight a
6. not included to the TV and the device 4 Turn the TV and your device on Set the TV s input to match the connection you used HDMI 1 HDMI 2 etc pe ne Le Fame Sense HDMI CABLE DIGITAL BEST HD VIDEO 1080p HD AUDIO COMPONENT CABLE ANALOG BETTER HD VIDEO 1080p e STEREO AUDIO 4 HDMI BEST COMPONENT BETTER 4 COAXIAL CABLE ANALOG BETTER HD VIDEO 1080i STEREO AUDIO _ _ err a il E AV CABLE ANALOG GOOD VMEo 480 uE HET 12 Maximum resolution T CONNECTING A DEVICE AUDIO AND VIDEO CABLE TYPES AV CABLE AV cables or composite cables are the traditional way of connecting your devices to your TV Video signals are sent over the yellow connector while audio is sent over the red and white connectors e Video Resolutions up to 480i e Analog Connection e Audio and Video Signals O Y V L R GOOD 13 COAXIAL CABLE Coaxial cables are the traditional way of connecting antennas and cable television signals to your TV Coaxial cables carry both audio and video signals through a single connector e HD Video Resolutions up to 1080i e Analog Connection e Audio and Video Signals Coaxial BETTER COMPONENT CABLE Component cables are designed to carry high definition video signals along with additional audio connections Colors are delivered with color information split up three different ways ove
7. remote The on screen menu is displayed VIZIO Ga GUIDED SETUP Tuner Setup Highlight Guided Setup and press OK Highlight the guided setup you want to use and press OK e Tuner Setup Set up the TV tuner Follow the on screen instructions When finished press the BACK button to change additional settings or EXIT USING THE INFO WINDOW The Info Window can be displayed by pressing the INFO or GUIDE button on the remote Press the INFO or GUIDE button one time to display channel input and display information Press the INFO or GUIDE button two times to display the program title program rating audio information and the start and end times of the program Display Information Channel Input Information E 28 1 KCET HD Eee Een ool ara Oliver s Holiday Surprise TV PG V Dolby Digital Stereo 11 00AM 12 00PM Oliver wakes up one morning only to discover that his pals are missing In this hour long holiday special Oliver goes on a journey in search of his pals Who knows what he ll encounter on the way Program Title Rating Information Program Description DIGITAL EPISODE GUIDE amp INFO WINDOW 47 Using the USB Media Player 6 USING THE USB MEDIA PLAYER Playing USB Media To play your USB media The USB Media Player allows you to connect a USB thumb drive to your TV and play music video or photos 1 Connect your USB thumb drive to the USB port on the side of the TV
8. HDMI CEC ARC Dolby Digital Certifications Voltage Range 120V 60 Hz Standby Power Consumption Limited Warranty ON PARTS AND LABOR Covers units purchased as new in United States and Puerto Rico Only VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one 1 year of non commercial usage and ninety 90 days of commercial use If a Product covered by this warranty is determined to be defective within the warranty period VIZIO will either repair or replace the Product at its sole option and discretion To obtain warranty service contact VIZIO Technical Support via e mail TechSupport VIZIO com or via phone at 877 MY VIZIO 877 698 4946 from 7 00AM to 11 00PM Monday through Friday and 9 00AM to 6 00PM Saturday and Sunday Central Standard Time or visit www VIZIO com PRE AUTHORIZATION MUST BE OBTAINED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER Proof of purchase in the form of a purchase receipt or copy thereof is required to show that a Product is within the warranty period Parts and Labor There will be no charge for parts or labor during the warranty period Replacement parts and Products may be new or recertified at VIZIO s option and sole discretion Replacement parts and Products are warranted for the remaining portion of the original warranty or for ninety 90 days from warranty service or replacement whichever is gre
9. HDMI CABLE AV cables or composite cables are the Optical SPDIF cables transmit audio signals as HDMI technology transmits crystal clear digital traditional way of connecting your devices to pulses of light through a cable made of plastic multi channel surround audio through a single your audio device Audio signals are sent over fibers Audio signals are digitally transmitted HDMI cable Audio Return Channel enabled the red and white connectors between devices ARC TVs allow audio to be sent over an already connected HDMI cable eliminating the need for a separate audio cable See Connecting an Audio Device ARC on page 17 e Quality Stereo Connection e PCM Stream Lossless e CEC 2 way Communication 2 0 Channel Dolby Digital 5 1 Channel Auto setup e Analog Connection e Digital Connection e PCM DTS Dolby Digital e 2 0 5 1 Scaleable Lossless Digital Audio Connection e Audio and Video Signals e Audio Signal Only e Audio Signal Only O Optical SPDIF GOOD BETTER BEST 16 CONNECTING AN AUDIO DEVICE ARC With HDMI ARC Without HDMI ARC Without an HDMI ARC setup your TV will transmit audio signals from the built in tuner and VIA apps to your home audio receiver through a separate audio connection z Built in Tuner Your TV RCA Audio Your Blu ray Player 17 Your TV Built in Tuner Your Blu ray Player With an HDMI ARC setup the audio conn
10. being broadcast with closed captions the TV will not display them 5 l ZB The Closed Captions menu does not appear when an HDMI input is selected A Y To activate or deactivate closed captions 1 Press the MENU button on the remote The on screen menu is displayed VIZIO A CLOSED CAPTIONS Closed Captions Off Cel CSI Use the Arrow buttons on the remote to highlight Closed Captions and press OK The CLOSED CAPTIONS menu is displayed Analog Closed Captions Digital Closed Captions Digital Style Use the Arrow buttons on the remote to highlight Closed Captions and then use the Left Right Arrow buttons to select On or Off Use the Arrow buttons on the remote to highlight either Analog or Digital Closed Captions Use the Left Right Arrow buttons on the remote to select the caption channel you wish to display then press BACK to adjust additional settings or EXIT Changing the Appearance of Digital Closed Captions Digital closed captions can be displayed according to your preference See the diagram on the next page for an explanation of the parts of the closed caption area To change the appearance of digital closed captions 1 From the CLOSED CAPTIONS menu use the Arrow buttons VIZIO A to highlight Digital Style and DIGITAL STYLE press OK Caption Style Custom Text Style As Broadcast 2 Use the Left Right Arrow Text Size cE buttons on the remote to Tex Color Gen select Custo
11. enter your new 4 digit parental control passcode 3 In the Confirm PIN field use the Number Pad on the remote to re enter your new 4 digit parental control passcode 4 Write down your new parental control passcode and save it in a secure location 5 Press the EXIT button on the remote Resetting the Content Locks To reset the content locks to the factory default settings 1 From the PARENTAL CONTROLS menu highlight Reset Locks and press OK The TV displays Select Reset to restore Parental Controls to the factory defaults 2 Highlight Reset and press OK Setting up View Mode Your TV can display the screens in different modes To change the on screen menu language 1 I Press the MENU button on the remote The on screen menu is displayed Use the Arrow buttons on the remote to highlight System and press OK The SYSTEM menu is displayed Use the Arrow buttons on the remote to highlight View Mode and press OK The VIEW MODE menu is displayed Highlight your preferred view mode Viewport Overlay or Centered Overlay and press OK All screens will now be displayed in the selected mode Press the BACK button to change additional settings or EXIT Changing the Wide Setting VIZIO A 2 lt VIEW MODE Viewport Overlay 3 Centered Overlay 44 To change the aspect ration Press the MENU button on the remote The on screen menu is displayed Use the Arrow buttons on the remote to hig
12. expose batteries to excessive heat such as sunshine fire or the like If any of the following occurs contact the dealer The power cord fails or frays Liquid sprays or any object drops into your TV Your TV is exposed to rain or other moisture Your TV is dropped or damaged in any way The performance of your TV changes substantially This apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus The mains plug or appliance coupler is used as the disconnect device the disconnect device shall remain readily operable CAUTION These servicing instructions are for use by qualified service personnel only To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated DANGEROUS VOLTAGE within the product s enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons TELEVISION ANTENNA CONNECTION PROTECTION If an outside antenna satellite dish or cable system is to be connected to the TV make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges Article 810 of the National Electrical Code ANSI NFPSA
13. lt SMPTE Test Pattern lt Flat Test Pattern gt Off Off 2 Use the Arrow buttons on the remote to highlight Off Use the 2 Use the Arrow buttons on the remote to highlight Off Use Left Right Arrow buttons to highlight On to show the Color the Left Right Arrow buttons to select the percentage Bar brightness for the flat test pattern Selecting a percentage or immediately shows the flat pattern at that brightness To hide the Color Bar Test Pattern use the Left Right Arrow o or buttons to highlight Off To disable the Flat Test Pattern use the Left Right Arro 3 When you are finished press the BACK button to adjust Buttons io highlight of S di z additional settings or EXIT 3 When you are finished press the BACK button to adjust additional settings or EXIT 27 To show or hide the Ramp Test Pattern 1 Ensure that you are on an input that is displaying active content From the Color Tuner menu use the Arrow buttons to highlight Color Tuner and then press the Left Right Arrow buttons until the Ramp Test Pattern menu is displayed Ramp Test Pattern Off 2 Use the Arrow buttons on the remote to highlight Off Use the Left Right Arrow buttons to select the color for the ramp test pattern Selecting a color immediately shows that color ramp To hide the Ramp Test Pattern use the Left Right Arrow buttons to highlight Off 3 When you are finished press the BACK button to adjust additio
14. of content ratings and their definitions visit YS www tvguidelines org To block or unblock content by its rating 1 From the PARENTAL CONTROLS menu highlight the content type you want to adjust and press OK USA TV USA television program broadcasts USA MOVIE USA movie broadcasts Canadian English Canadian English television program broadcasts Canadian French Canadian French television program broadcasts 2 For each rating type you want to block or unblock use the Up Down and Left Right Arrow buttons on the remote to highlight the rating type and press OK 3 When the rating type is blocked the Lock icon appears locked Content with this rating and all higher ratings cannot be viewed 4 When the rating type is unblocked the Lock icon appears unlocked Content with this rating and all lower ratings can be viewed If you want to block all unrated content highlight Block Unrated Shows and use the Arrow buttons on the remote to select On 5 When you are finished adjusting the rating level blocks press the EXIT button on the remote Changing the Parental Control Passcode If you use the parental controls you should change the passcode to prevent children from accessing inappropriate material To change the parental control passcode 1 From the PARENTAL CONTROLS menu highlight Change PIN and press OK The CHANGE PIN menu is displayed 2 In the New PIN field use the Number Pad on the remote to
15. system information 2 System information is used verify settings and the Z firmware version EA oS 5 When you are finished reviewing the system information press the BACK button to view or change additional settings or EXIT Changing the On Screen Menu Language Your TV can display the on screen menu in different languages To change the on screen menu language 1 Press the MENU button on the remote The on screen menu is VIZIO a displayed MENU LANGUAGE English 2 Use the Arrow buttons on the panel remote to highlight System and Bane press OK The SYSTEM menu is displayed 3 Use the Arrow buttons on the remote to highlight Menu Language and press OK The MENU LANGUAGE menu is displayed 4 Highlight your preferred language English Espanol or Frangais and press OK All screens will now be displayed in the selected language 5 Press the BACK button to change additional settings or EXIT 41 Setting the Time and Local Settings To ensure the correct time is displayed when you press the INFO button set the TV s time zone 1 Press the MENU button on the remote The on screen menu is VIZIO La displayed TIME ZONE 2 Use the Arrow buttons on the Ao remote to highlight System and ae press OK The SYSTEM menu is pose displayed Mountain Central 3 Use the Arrow buttons on the Eastern remote to highlight Time amp RERE Local Settings and press OK The menu headed by the local date and
16. the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Unplug the power cord before cleaning your TV When moving your TV from an area of low temperature to an area of high temperature condensation may form in the housing Wait before turning on your TV to avoid causing fire electric shock or component damage A distance of at least three feet should be maintained between your TV and any heat source such as a radiator heater oven amplifier etc Do not install your TV close to smoke Operating your TV close to smoke or moisture may cause fire or electric shock Slots and openings in the back and bottom of the cabinet are provided for ventilation To ensure reliable operation of your TV and to protect it from overheating be sure these openings are not blocked or covered Do not place your TV in a bookcase or cabinet unless proper ventilation is provided Never push any object into the slots and openings on your TV cabinet Do not place any objects on the top of your TV Doing so could short circuit parts causing a fire or electric shock Never spill liquids on your TV Your TV should be operated only from the type of power source indicated on the label If you are not sure of the type of power supplied to your home consult your dealer or local power company Do not apply pressure or throw objects at your TV This may compromise the integrity of the display The manufacturer s warr
17. the best signal room or close to a window for the best signal When I change input source the display image changes size The picture is distorted The TV remembers the viewing mode on each input Nearby electrical devices may be interfering with the source If the viewing mode on the new input source TV Separate the TV from electrical appliances cars or differs from the one on the input source you switch from fluorescent lights the difference may be noticeable Ensure all cables are securely attached See Changing the Screen Aspect Ratio on page 20 The display image does not cover the entire screen If you are using TV AV or Component with 480i input press the WIDE button on the remote to change the screen mode 52 Screen Size Viewable Area Dimensions w Stand w o Stand Weight w Stand w o Stand TV Type Refresh Rate Maximum Resolution Pixel Pitch Dynamic Contrast Ratio Response Time Viewing Angle HDMI Inputs Component Video Inputs Composite Inputs RF Antenna Input USB 2 0 Ports Audio Outputs OSD Language Specifications B D39h CO 39 Class 38 50 SALVO X 22O X BA SALO X ZOSU X 2O 14 11 Ibs 13 45 Ibs Full Array LED 60 Hz Effective Refresh Rate 1366 x 768 720p 0 62475 mm H x 0 62475 mm V 200 000 1 6 5 MS 1O 1T 2 RCA Stereo Optical Digital English Spanish French 53 D39h CO CSA US BETS 7 ICES 003 FCC Class B
18. the remote Text Typical choices include Opaque background transparent window Only a strip of background appears behind the text expanding as the text appears This is the typical As Broadcast mode Opaque background and window in the same color When text appears the entire line fills with color at once In the example below the closed caption text is green the background is black and the window is red Background Window CLOSED CAPTIONS SCREEN LAYOUT 38 RENAMING DEVICES ON THE INPUT MENU Inputs can be renamed to make them easier to recognize on the Input menu see Changing the Input Source on page 20 For example if you have a DVD player connected to the Component input you can rename that input to display DVD Player To change the name of an input 1 Press the MENU button on the remote The on screen menu is displayed 2 Use the Arrow buttons on the remote to highlight Devices and press the OK button The DEVICES menu is displayed 3 Highlight the input port that you want to name and press OK 4 To use a preset input name a Highlight the Input Port row and press OK b Highlight the input name you want to use HDMI 1 Blu ray Cable Box Computer DVD DVR Game or Satellite and press OK or To enter a custom name a Enter your custom name using the on screen keyboard b Highlight OK and press OK c The Input Name changes to show the custom name thot you create
19. time is displayed Newfoundland Indiana Arizona 4 Highlight Time Zone and press OK The TIME ZONE menu is displayed 5 Highlight your time zone and press OK 6 Highlight Daylight Saving Time and press OK The DAYLIGHT SAVING TIME menu is displayed Choose On if your locale observes daylight savings time Off if it does not or Auto to have your TV detect daylight savings automatically 7 Press the BACK button to change additional settings or EXIT Using the Parental Controls The TV s parental controls allow you to prevent the TV from displaying certain channels or programs without a password The Parental Controls menu only appears when You are using the tuner to receive your TV signals such as when you are using an antenna for Over the Air signals or when connected to cable TV directly from the wall no cable box You have a device connected using a composite video cable or a coaxial cable such as a VCR satellite or cable box or DVR Accessing the Parental Controls Menu To access the Parental Controls menu 1 Press the MENU button on the remote The on screen menu is displayed 2 Use the Arrow buttons on the remote to highlight System and press OK The SYSTEM menu is displayed 3 Use the Arrow buttons on the remote to highlight Parental Controls and press OK 4 Enter your parental passcode If you have not set a passcode enter the default 0000 The PARENTAL CONTROLS menu is displayed To set a cus
20. you wish to adjust then press the Left Right Arrow buttons to change the setting Left Right Arrow buttons to adjust the horizontal position of the displayed picture Use the Up Down Arrow buttons to adjust the vertical position of the displayed picture Press the OK button when you are finished Reduce Block Noise Low Game Low Latency Picture Size amp Position Film Mode Auto e Color Temperature Gamma e Film Mode Optimizes the picture for watching film Adjusts the warmness and Select Auto or Off coolness of the white areas Gamma Sets the shape of the gamma curve Use lower of the picture Select Cool values for bright room conditions and higher values Normal or Computer when it is dark Select 1 8 2 0 2 1 2 2 or 2 4 e Cool produces a a ae blue hued picture 3 When you have finished adjusting the More Picture settings D press BACK to adjust additional settings or EXIT e Normal is optimized for television viewing O y o e Computer optimizes the picture for use as a PC monitor Black Detail Adjusts the average brightness of the picture to compensate for large areas of brightness Select Off Low Medium or High Backlight Control Dynamically improves the contrast ration of the picture by adusting the backlight Select Off or On Reduce Signal Noise Reduces background picture noise when viewing analog sources The function helps to correct speckle noise with a slight reduction in sha
21. 70 provides information with regard to proper grounding of the mast and supporting structure grounding of the lead in wire to an antenna discharge unit size of the grounding conductors location of antenna discharge unit connection to grounding electrodes and requirements of the grounding electrode Ground Clamp Lightning Protection For added protection of the TV during a lightning storm or when it is left unattended or unused for long periods of time unplug the TV from the wall outlet and disconnect the antenna or cable system Power Lines Do not locate the antenna near overhead light or power circuits or where it could fall into such power lines or circuits Remember the screen of the coaxial cable is intended to be connected to earth in the building installation Antenna Lead In Wire Antenna Discharge Unit NEC Section 810 20 Grounding Conductors NEC Section 810 21 Ground Clamps ia Power Service Grounding Electrode System Electric Service Equipment NEC ART 250 part H Table of Contents Installing ETV PR 3 Inspecting the Package Contents 3 STOUT See wae ee CESS Se Deda ee Bees Gass a 3 Installing the TV Stand nenen 3 installing the Torn GWM ca eee aise 6 Controls and COMNGCIONG Se ns 7 BOCK PONG 2 sudac eee ee Phd tides Seceteied Etes 7 SIde PANE lt 4 22 04 8 268 it li dd Ma ee ie ee Pee es 8 FIOM PANEL tc aneti oh ong eet Atoms a te cos nme dae 9 Replacing the B M
22. B Media Player eeeeeeeees 48 Using the USB Media Player 48 Preparing your USB Drive to Play USB Media 0 48 Playing USB MSI 22 ne nr 48 Removing the USB Drive from the TV 48 SD SCHICOMOMS iri cream 53 Limited Warranty 2 stiscaesrslin donanawencharineinepanawemegants 55 Legal amp COMMING Co ss sgeatinadepadamenietey 56 FCC Class B Radio Interference Statement 56 DS 2 56 FC WOMEN teen te 56 INSPECTING THE PACKAGE CONTENTS Before installing your new TV take a moment to inspect the package contents Use the images below to ensure nothing is missing or damaged VIZIO LED HDTV Remote control with batteries QUICK START GUIDE TV stands Quick Start Guide a a SA Fa Z Power cord 4 x T3 30mm Phillips screws PACKAGE CONTENTS INSTALLING THE TV After removing the TV from the box and inspecting the package contents you can begin installing the TV Your TV can be installed in two ways On a flat surface using the included stand On a wall using a VESA standard wall mount not included Installing the TV Stand Your TV includes a stand designed to support the weight of the TV and keep it from falling over However the TV can still fall over if It is placed on an uneven unstable or non level surface It is pushed pulled or otherwise improperly moved If an earthquake occurs and the TV is not properly secured TV ON STANDS INSTALLING T
23. HE STAND It is recommended that two people take part in the stand installation Remove any plastic wrapping from the TV and the stand Place the TV screen down on a clean flat surface To prevent scratches or damage to the screen place the TV on a soft surface such as a blanket and avoid any sharp edges INSTALLING THE STAND LT titi Les sm Insert two 2 T3 30 mm Phillips screws included into the back of the TV and tighten them using a Phillips screwdriver to secure each stand to the TV Insert the left and right stands into the base of the TV When you are finished place the TV on a stable level surface Installing the TV on a Wall To mount your TV on a wall you will need a wall mount Consult the information below to find the appropriate mount for your TV model NI Ye Installing aTV on a wall requires lifting To prevent es injury or damage to the TV ask someone to help you D39h CO Hole Pattern 100 mm V x 100 mm H Weight w o Be sure the mount you choose is capable of supporting the weight of the TV After you have determined that you have the correct mount for your TV you can begin the installation WALL MOUNT SCREW LOCATIONS To install yourTV on a wall 1 Disconnect any cables connected to your TV 2 Place the TV face down on a clean flat stable surface Be sure the surface is clear of debris that can scratch or damage the TV 3 Remove the base by looseni
24. N S ue nn 11 Connecting Your DEVICES siennes 12 Connecting A DSVICS oo sun om Whee ceases set 12 Connecting a Device Audio and Video Cable Types 13 Connecting an Audio Device 15 Connecting an Audio Device Audio Cable Types 16 Connecting an Audio Device ARC 17 Completing the First Time Setup 18 Using the On Screen Menu 19 Navigating the On Screen Menu 19 Changing the Input Source aaua aaa 20 Changing the Screen Aspect Ratio 20 Viewing Video with the Menu Open 21 Adjusting the Picture Settings 22 Adjusting the More Picture Settings 23 Adjusting the Picture Mode Edit Settings 24 Adjusting the Color Calibration Settings 25 Adjusting the Color Tuner Settings 25 Creating a Custom Picture Mode cecceccrrerrre 28 Locking and Unlocking the Custom Picture Modes 29 Deleting a Custom Picture Mode 29 Adjusting the Audio Settings 30 Changing the Equalizer Settings 3 Deleting the Custom Audio Mode 3 Setting TMS 2224 HILL ae samedi dresse 32 Setting the Sleep lIMerss anse doetsedamnnis 32 Setting the Auto Power Off Feature 32 Setting Up Channels 0 40 44 40bires oe eeer eus 33 Selecting a Channel SOUICE sesser 33 Finding CHanNEl CPP 33 Adding
25. New ChHanNel S sisenes neina 34 Skipping NAMRSIlS s 2 Sects AS ne 35 Listening to Alternate Audio Lan eut aa 36 Changing the Analog Audio Language 36 Changing the Digital Audio Language 36 Setting Up Closed Captioning 37 Changing the Appearance of Digital Closed CAPtONS ii ches cc bacteadesesesepacccieiecdaasacecndseedeenacaeecieses 37 Renaming Devices on the Input Menu 39 Changing the TV Settings 2 i424 c0ca she4he2eeeee 4 40 Viewing System Information cc ccceeeeeeeeeceeeeeeeeeeaaaeeee 40 Changing the On Screen Menu Language 41 Setting the Time and Local Settings 41 Using the Parental Controls sseccrcreiiiciiis iiss 42 Accessing the Parental Controls Menu 42 Enabling or Disabling Program ROMM ess denis 42 Locking and Unlocking Channels 42 Blocking and Unblocking Content by Rating 43 Changing the Parental Control Passcode 43 Resetting the Content Locks 43 Setting up VIEW MOUS 52 65 sus eines 44 Changing the Wide Setting 44 Adjusting the CEC Settings 45 Turning the Power Indicator On or Off 45 Using the Reset amp Admin Menu 46 Restoring the TV to Factory Default Settings 46 Using the Guided Setup Menu 46 Using the Info WINdOW 24444443 s iesieiNasidasss 47 Using the US
26. OK button SELECT A LANGUAGE _ ke 18 Using the On Screen Menu 5 Your TV features an easy to use on screen menu NAVIGATING THE ON SCREEN MENU To open the on screen menu press the MENU button on the To open the on screen menu press remote the MENU button on the remote From this menu you can Use the Arrow buttons to highlight Adjust the Picture settings a menu option and press the OK Adjust the Audio settings TES button to select that option Set the Sleep Timer WENES e Adjust the Channel settings Picture i i Audio Set up Closed Captioning Onn LT While navigating the on screen menu you can press Select input devices cb Channels A the BACK button at any time fo return to the previous Ads iV soning am Closed Captions menu screen The EXIT button will close the Devices OMSC MMemEr Access the Guided Setup System G2 Guided Setup 19 CHANGING THE INPUT SOURCE CHANGING THE SCREEN ASPECT RATIO External devices such as DVD players Blu ray Players and The TV can display images in five different modes Normal Stretch video game consoles can be connected to your TV To use one Panoramic Wide and Zoom Each mode displays the picture of these devices with your TV you must first change the input differently source using the Input menu To change the screen aspect ratio To change the input source 1 Press the WIDE button on the 1 Press the INPUT button on remote CI the remote The Input me
27. UDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE VIZIO S TOTAL LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER INCLUDING VIZIO S NEGLIGENCE ALLEGED DAMAGE OR DEFECTIVE GOODS WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCT VIZIO SHALL NOT BE RESPONSIBLE FOR LOSS OF USE LOSS OF INFORMATION OR DATA COMMERCIAL LOSS LOST REVENUE OR LOST PROFITS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE CHECK WWW VIZIO COM FOR THE MOST CURRENT VERSION Personal Data lf your VIZIO product is capable of storing personal data and other information ALL CONTENTS AND INFORMATION WILL BE DELETED IN THE COURSE OF SOME IN HOME AND ALL SHIP IN WARANTY SERVICE If this occurs your product will be restored to you configured as originally purchased You will be responsible for restoring all applicable data and passwords Recovery and reinstallation of user data is not covered under this Limited Warranty In order to protect y
28. VIZIO USER MANUAL Model D39h CO D O LBY Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories DIGITAL g For DTS patents see i http patents dts com Manufactured under license from DTS Licensing Limited DTS the Symbol amp DTS and the Symbol together are registered TruSurround trademarks and DTS Studio Sound is a trademark of DTS Inc DTS Inc All Rights Reserved HDMI the HDMI logo and High Definition Multimedia ei Lo EE Interface are trademarks or registered trademarks of HDMI HIGH DEFINITION MULTIMEDIA INTERFACE Licensing LLC am This product qualifies for ENERGY STAR in the factory default setting and this is the setting in which power A savings will be achieved Changing the factory default ref fi picture settings or enabling other features will increase power consumption that could exceed the limits necessary ENERGY STAR to qualify for ENERGY STAR rating For more information on the ENERGY STAR program refer to energystar gov Welcome THANK YOU FOR CHOOSING VIZIO Congratulations on the purchase of your new VIZIO HDTV To get the most out of your new VIZIO product read these instructions before using your product and retain them for future reference Be sure to inspect the package contents to ensure there are no missing or damaged parts PRODUCT REGISTRATION To purchase or inquire about accessories and installatio
29. anty does not cover user abuse or improper installations The power cord must be replaced when using different voltage than the voltage specified For more information contact your dealer When connected to a power outlet power is always flowing into your TV To totally disconnect power unplug the power cord The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un isolated dangerous voltage within the inside of your TV that may be of sufficient magnitude to constitute a risk of electric shock to persons Do not overload power strips and extension cords Overloading can result in fire or electric shock The wall socket should be installed near your TV and easily accessible Only power of the marked voltage can be used for your TV Any other voltage than the specified voltage may cause fire or electric shock Do not touch the power cord during lightning To avoid electric shock avoid handling the power cord during electrical storms Unplug yourTV during a lightning storm or when it will not be used for long period of time This will protect your TV from damage due to power surges Do not attempt to repair or service your TV yourself Opening or removing the back cover may expose you to high voltages electric shock and other hazards If repair is required contact your dealer and refer all servicing to qualified service personnel WARNING Keep your TV aw
30. ater Type of Service Defective Products must be sent to a VIZIO service center to obtain warranty service VIZIO is not responsible for transportation costs to the service center but VIZIO will cover return shipping to the customer PRE AUTHORIZATION IS REQUIRED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER FOR WARRANTY SERVICE Product returns to VIZIO s service centers must utilize either the original carton box and shipping material or packaging that affords an equal degree of protection VIZIO Technical Support will provide instructions for packing and shipping the covered Product to the VIZIO service center Limitations and Exclusions VIZIO s one year limited warranty only covers defects in materials and workmanship This warranty does not cover for example cosmetic damage normal wear and tear improper operation improper voltage supply or power surges signal issues damages from shipping acts of God any type of customer misuse modifications or adjustments as well as installation and set up issues or any repairs attempted by anyone 55 otherthan by aVIZIO authorized service center Products with unreadable or removed serial numbers or requiring routine maintenance are not covered This one year limited warranty does not cover Products sold AS IS FACTORY RECERTIFIED or by a non authorized reseller THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED ABOVE ANY IMPLIED WARRANTIES INCL
31. ay from moisture Do not expose your TV to rain or moisture If water penetrates into your TV unplug the power cord and contact your dealer Continuous use in this case may result in fire or electric shock Do not use your TV if any abnormality occurs If any smoke or odor becomes apparent unplug the power cord and contact your dealer immediately Do not try to repair your TV yourself Avoid using dropped or damaged appliances If your TV is dropped and the housing is damaged the internal components may function abnormally Unplug the power cord immediately and contact your dealer for repair Continued use of yourTV may cause fire or electric shock Do not install your TV in an area with heavy dust or high humidity Operating your TV in environments with heavy dust or high humidity may cause fire or electric shock Follow instructions for moving your TV Ensure that the power cord and any other cables are unplugged before moving your TV When unplugging your TV hold the AC DC power adapter not the cord Pulling on the power cord may damage the wires inside the cord and cause fire or electric shock When your TV will not be used for an extended period of time unplug the power cord To reduce risk of electric shock do not touch the connector with wet hands Insert batteries in accordance with instructions Incorrect polarities may cause the batteries to leak which can damage the remote control or injure the operator Do not
32. d 5 When you have finished naming your input press the BACK button to adjust additional settings or EXIT 39 Input Port VIZIO A NAME INPUT HDMI 1 lt DvD e Input Name DvD_ e Custom Name a b e d e f g hj i j k l mn oipiq r SANWA y 700 INRP RO AR 810 Space OK Cancel Select the input name from a list of common device names Blu ray Cable Box DVD etc ow 0 CHANGING THE TV SETTINGS Using the System menu you can View system information Change the on screen menu language Set the time zone and local settings Set up parental controls Select a view mode Change the Wide settings Adjust the California Energy Commission CEC settings Adjust when the power indicator is illuminated Reset the TV settings and set up administrative controls VIZIO A lt SYSTEM System Information Menu Language English Time amp Local Settings Parental Controls View Mode Wide CEC Power Indicator Off Reset amp Admin View status information for the TV remote current input and your network NW _8_ AO Viewing System Information To view a summary of the TV settings 1 Press the MENU button on the remote The on screen menu is displayed 2 Use the Arrow buttons on the remote to highlight System and press OK The SYSTEM menu is displayed 3 Highlight System Information and press OK 4 Use the Up Down Arrow buttons to scroll through the
33. ection between your TV and home audio receiver can be removed The HDMI cable will transmit audio signal to and from your TV with an all digital audio video connection Completing the First Time Setup 4 The first time you turn on the TV the Setup App will guide you 4 Use the Arrow buttons on the through each of the steps necessary to get your TV ready for use remote to highlight your TV Ru DOPEN source and press OK Before you begin the first time setup Your TV should be installed and the power cord should be connected to an electrical outlet Your devices should be connected If you have a wireless network have the wireless password ready 5 If you have cable TV select whether you have a cable box or if you connect the TV directly to a cable from the wall If you are connecting to your network with an Ethernet cable connect it to the Ethernet port on the TV To complete the first time setup 1 Press the Power Standby button on the remote The TV th tuo A Power Omand ihe set APP Use the Arrow and OK buttons starts on the remote to select the input hi your TV source is connected to 2 Use the Arrow buttons on the OPUS remote to highlight Home Use ait Heine Use forn hons Ua and press OK 6 When you are finished the message Your VIZIO TV is set up will appear The First Time Setup is complete 3 Use the Arrow buttons on the remote to highlight your preferred language and then press the
34. een Since the picture is being stretched the display image may appear distorted If the program is already formatted for widescreen viewing 1 85 1 or 2 35 1 then black bars will appear on the top and bottom of the display image e Zoom expands images with black bars to fit the screen 20 VIEWING VIDEO WITH THE MENU OPEN When the on screen menu opens it covers the left hand portion of the picture The picture can be displayed in three different ways e Full sized and centered on the screen The left hand portion of the picture covered by the menu e Resized to fit The entire picture is visible in the space to the right of the menu e Full sized and aligned to the right edge of the menu The picture extends off of the right side of the screen To change the position of the picture while the on screen menu is displayed 1 Use the Arrow buttons on the remote to highlight CEL Resize Video Press OK to cycle through the three display methods Press the Up Arrow button on the remote to the menu VIZIO A PICTURE Picture Mode Standard Backlight C 85 Brightness E 50 Contrast 50 Color Le 59 Tint Ey 0 Sharpness 1 More Picture Picture Mode Edit Color Calibration Select from preset picture modes Standard picture mode meets ENERGY STAR requirements For the best picture use Calibrated mode To reduce video delay lag when gaming use Game mode ays 2 VIZIO PICTURE Picture Mode S
35. ep Timer When activated the TV s sleep timer will turn the TV off after a set 1 period of time 1 Press the MENU button on the remote The on screen menu is displayed Use the Arrow buttons on the remote to highlight Timers and press OK The TIMERS menu is displayed Use the Left Right Arrow buttons on the remote to highlight the period of time after which you want the TV to go to sleep 30 60 90 120 or 180 minutes If you don t want the sleep timer to activate change the setting to Off When you have finished setting the sleep timer press the BACK button to adjust additional settings or EXIT Setting the Auto Power Off Feature To help save energy your TV is set by default to turn off after 10 minutes without a video or audio signal This feature can be deactivated To set the Auto Power Off feature VIZIO La A lt TIMERS Sleep Timer Off Auto Power Off 10 minutes 3 NW 32 From the TIMERS menu use the Up Down Arrow buttons on the remote to highlight Auto Power Off Use the Left Right Arrow buttons on the remote to change whether the TV will turn off If you don t want the TV to turn off when there is no signal change the setting to Off or 10 minutes When you have finished setting the auto power off time press the BACK button to adjust additional settings or EXIT Select a Channel Source Find channels Perform a partial channel scan Manually add channels Select channels t
36. ere is no power Ensure the TV is plugged into a working electrical outlet Ensure the power cable is securely attached to the TV Press the POWER button on the remote or on the side of the TV to turn the TV on The power is on but there is no image on the screen Ensure all cables are securely attached to the TV Ensure all devices are connected correctly Devices differ see your device s user manual for details Adjust Brightness Contrast or Backlight See Adjusting the Picture Settings on page 22 Press the INPUT button on the remote to select a different input source 51 There is no sound Press VOLUME UP on the remote control Press the MUTE button on the remote to ensure mute is off Check the audio settings See Adjusting the Audio Settings on page 30 Ensure the speakers are set to On Ensure no headphones are connected to the TV Check the audio connections of external devices Blu ray player game console cable satellite box that are connected to the TV If you are using an antenna the signal strength of the channel may be low Ensure your antenna is connected securely to the TV and move the antenna around the room or close to a window for the best signal The sound is flat or dialog is not audible Turn off Sound Leveling See Adjusting the Audio Settings on page 30 The colors on the TV don t look right Adjust the Color and Tint settings in the Picture menu See Adjusting the Picture S
37. ettings on page 22 Check all cables to ensure they are securely attached The buttons on the remote aren t working The TV has pixels dots that are always dark or always lit The Red and Yellow hot key buttons below the V button Your HDTV is precision manufactured using an extremely do not operate with this model high level of technology However sometimes pixels may not display correctly These types of occurrences are Ensure you are only pressing one button at a time inherent to this type of product and do not constitute a Point the remote directly at the TV when pressing a defective product button Replace the remote batteries with new ones See I see noise or static on the screen Replacing the Boneres Om page 11 When your TV s digital capabilities exceed a digital broadcast signal the signal is up converted The image quality is not good improved to match your TV s display capabilities This For the best image quality view high definition up converting can sometimes cause irregularities in the programs using digital sources Connect your devices image with HDMI cables If you are using an antenna the signal strength of the If you are using an antenna the signal strength of the channel may be low Ensure your antenna is connected channel may be low Ensure your antenna is connected securely to the TV and move the antenna around the securely to the TV and move the antenna around the room or close to a window for
38. hlight System and press OK The SYSTEM menu is displayed Use the Arrow buttons on the remote to highlight Wide and press OK The aspect ratio options are displayed Select an aspect ratio See Changing the Screen Aspect Ratio on page 20 for more information Adjusting the CEC Settings The California Energy Commission CEC function on your TV enables you to control HDMI connected devices with the included remote without any additional programming Not all HDMI devices support CEC See your device s user manual for details To enable disable or adjust CEC settings 1 Press the MENU button on the remote The on screen menu is displayed 2 Use the Arrow buttons on the remote to highlight System and press OK The SYSTEM menu is displayed 3 Use the Arrow buttons on the remote to highlight CEC and press OK The CEC menu is displayed 4 Use the Arrow and OK buttons to adjust each setting e CEC To use CEC you must select On e Device Discovery Use this function to determine if your device is connected and supports CEC 5 Press the BACK button to change additional settings or EXIT A5 Turning the Power Indicator On or Off The Power Indicator on the front of your TV normally does not glow when the TV is on You can change this setting if you prefer the light to be on To turn the Power Indicator Light on or off l Press the MENU button on the remote The on screen menu is displayed Use the Arrow buttons
39. icture mode select the Delete button 2 Use the Left Right Arrow buttons to highlight Delete and press OK 3 Press the BACK button to adjust additional settings or EXIT ADJUSTING THE AUDIO SETTINGS e Analog Audio Out Sets the volume control properties for the 3 5mm headphone jack connector when To adjust the audio settings connected to a home theater audio system Select Variable to control the headphones volume from 1 Press the MENU button on the VIZIO a the TV s volume controls or select Fixed to control remote The on screen menu AG the headphones volume from your home theater is displayed Wiccan oF system controls Some external speakers can also be ikee Anew Dues eatne ae ia Sa connected to the 3 5mm connector remote to highlight Audio and Balance 0 e Equalizer Adjusts the boost or attenuation of different press OK The AUDIO menu Lip Syne 0 frequencies using either preset or custom settings See is displayed Digital Audio Out PCM Changing the Equalizer Settings on page 31 P EE E Analog Audio Out Fixed e Delete Audio Mode Deletes a custom audio mode highlight the setting you wish Equalizer created using the Equalizer Settings See Deleting the Delete Audio Mode Custom Audio Mode on page 31 to adjust then press Left Right je eve 19 Gane s This option is cannot be selected if no custom audio 9 A mode has been created e TV Speakers Turns the built in speakers on or off p 4 When you have fin
40. ished adjusting the audio settings press a the BACK button to adjust additional settings or EXIT When the TV speakers are set to On DTS signals lt cannot be passed through digital audio outputs 7 x e Surround Sound Surround sound uses DTS TruSurround to deliver an immersive surround sound experience from the TV s internal speakers TruSurround completes the entertainment experience by providing deep rich bass and by delivering crisp details and clear intelligible dialog Select On or Off e Balance Adjusts the loudness of the audio output from the left and right speakers e Lip Sync Adjusts the synchronization between the display image and the accompanying audio track a You must select Bitstream for audio with more than JS two channels 3 0 5 0 or 5 1 for example 30 Changing the Equalizer Settings The graphic equalizer has several pre set modes and allows you to create one custom mode To select a pre set audio mode 1 5 Press the MENU button on the remote The on screen menu is displayed Use the Arrow buttons on the remote to highlight Audio and press OK The AUDIO menu is displayed Use the Arrow buttons to highlight Equalizer and press OK The Audio Mode and equalizer settings screen appears Use the Left and Right Arrow buttons to select an audio mode Flat Dynamic Center Bass Boost or Bright The equalizer bars change to reflect the mode Press the BACK button to adju
41. m and press OK don Pere The DIGITAL STYLE menu is THEM Aro displayed Text Edges Color As Broadcas 3 Use the Up Down Arrow Background Color Black Background Opacity As Broadcas Red As Broadcas buttons on the remote to highlight the setting you wish to change then use the Left Right Arrow buttons to change the setting e Caption Style Choose As Broadcast to keep default settings or Custom to manually change each setting e Text Style Change the font used for the closed captioning text Window Color Window Opacity Select As Braodcase to display digital captions as sent by the caption provider The color and size for the caption text and background can still be customized AA wY e Text Size Make the text larger or smaller e Text Color Change the color of the text e Text Opacity Change the transparency of the text e Text Edges Change the effects at the edges of the text such as raising the edges or adding drop shadows 37 e Text Edges Color Change the color of the text edge effects e Background Color Change the color of the background directly behind the text e Background Opacity Change the transparency of the background directly behind the text e Window Color Change the color of the closed captioning box e Window Opacity Change the transparency of the closed captioning box When you are satisfied with the appearance of the closed captions press the EXIT button on
42. n between the equipment and receiver 3 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected 4 Consult the dealer or an experienced radio TV technician for help This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Notice 1 The changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment 2 Shielded interface cables and AC power cord if any must be used in order to comply with the emission limits 3 The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment It is the responsibilities of the user to correct such interference FCC Warning Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user s authority to operate this equipment Other Image s used under license from Shutterstock com 56 2015 VIZIO INC ALL RIGHTS RESERVED 15041 7MH US NC
43. n services for your VIZIO product visit our website at www VIZIO com or call toll free at 877 698 4946 We recommend thot you either Register your VIZIO product at www VIZIO com Complete and mail the enclosed registration card Extended Warranties For peace of mind and to protect your investment beyond the standard warranty VIZIO offers on site extended warranty service plans These plans provide additional coverage during the standard warranty period TO purchase an extended warranty service plan visit www VIZIO com WHEN READING THIS MANUAL When you see this symbol please read the A accompanying important warning or notice It is intended to alert you to the presence of important operating instructions When you see this symbol please read the accompanying helpful tip il 4 IMPORTANT SAFETY INSTRUCTIONS Your TV is designed and manufactured to operate within defined design limits Misuse may result in electric shock or fire To prevent your TV from being damaged the following instructions should be observed for the installation use and maintenance of your TV Read the following safety instructions before operating your TV Keep these instructions in a safe place for future reference To reduce the risk of electric shock or component damage switch off the power before connecting other components to your TV Read these instructions Keep these instructions Heed all warnings Follow all instructions
44. nal settings or EXIT 28 Creating a Custom Picture Mode Custom picture modes allow you to save a group of custom settings for various viewing conditions and video sources When changes are made while a preset picture mode is selected an asterisk appears after the name of the picture mode These settings can be saved as a new custom picture mode and the preset mode can be reset to its default settings A custom picture mode only applies to the input HDMI 1 HDMI 2 COMP AV etc in use when it was created Each input can have up to six custom picture modes Wy Ja A To create a custom picture mode 1 Set the Picture Mode to an existing Custom setting See Adjusting the Picture Settings on page 22 2 From the PICTURE menu use the Arrow buttons to highlight Picture Mode Edit and press OK The PICTURE MODE EDIT menu is displayed 3 On the PICTURE MODE EDIT menu select Save Picture Mode The SAVE PICTURE MODE menu is displayed VIZIO A SAVE PICTURE MODE lt type custom name gt u o Net oO xX O Th d m v 4 o No gt Oo E n W 5 WE 70a com Done 4 Use the Arrow buttons to enter a custom name using the on screen keyboard 5 Highlight Done and press OK 6 Press the EXIT button to exit the menu screens Locking and Unlocking the Custom Picture Modes Custom picture modes can be locked with a unique PIN to prevent accidental changes to their set
45. ng and removing the screws 4 Attach your TV and wall mount to the wall carefully following the instructions that came with your mount Use only with a UL listed wall mount bracket rated for the weight load of this TV w For some wall mounts you may want to use cables with right angle connectors This allows the TV to rest closer to the wall AC POWER HDMI BEST COMPONENT BETTER USB Connect USB thumb drive to play photo music or video HDMI Connect HDMI device Optical Audio Out Connect optical SPDIF audio device such as home audio receiver Stereo Audio Out Connect RCA audio device such as sound bar Coaxial Connect coaxial cable from cable satellite or antenna Component Composite Connect component or composite device HDMI Connect HDMI device AC POWER Connect AC power cord BACK PANEL pone Note The image shown here is for illustrative purposes only and may be subject to change The actual number of ports and their locations may vary depending on the model Power Press once to turn on the TV Press and hold to turn off the TV Input Press once to access the INPUT menu SIDE PANEL REMOTE SENSOR amp POWER INDICATOR When using the remote aim it directly at this sensor The power indicator flashes on when the TV turns on then goes out after several seconds To keep the power indicator on as long as the TV is on see Turning the Power Indicat
46. nother color channel to turn off or on Only two color channels can be turned off at the same time When you are finished with the color channels press the BACK button to adjust additional settings or EXIT 26 To adjust the 11 Point White Balance settings From the Color Tuner menu use the Arrow buttons to highlight Color Tuner and then press the Left Right Arrow buttons until the 11 Point White Balance menu is displayed lt q 11 Point White Balance Gain Red Green Blue 5 0 0 0 D Use the Arrow buttons on the remote to highlight the Gain and Color values you wish to adjust Press the OK button and use the Left Right Arrow buttons to adjust the value When you are finished press the OK button to save the setting When you are finished press the BACK button to adjust additional settings or EXIT All changes here are saved to Color Temperature To show or hide the Color Bar Test Pattern To show or hide the Flat Test Pattern 1 Ensure that you are on an input that is displaying active 1 Ensure that you are on an input that is displaying active content From the Color Tuner menu use the Arrow buttons content From the Color Tuner menu use the Arrow buttons to highlight Color Tuner and then press the Left Right Arrow to highlight Color Tuner and then press the Left Right Arrow buttons until the SMPTE Test Pattern menu is displayed buttons until the Flat Test Pattern menu is displayed
47. nu is Noel Neal displayed Qi 2 Use the Arrow buttons to o ca TV highlight the aspect ratio you Panoramic Stretch 2 Use the Up Down Arrow wish to view and press OK co o buttons or the INPUT button Normal preserves the content s Wide Wide on the remote to highlight the HDMI 1 original aspect ratio Since the input you wish to view and l 4 3 aspect ratio is not large Zoom Zoom press OK The selected input Is Fa enough to fill the TV s screen Note Aspect ratio settings may displayed black bars are added to the left YY Py Input source 000 and right of the display image Input Name Come e Stretch expands the display image to fill the screen Images may appear wider than intended If you are watching widescreen 1 85 1 or 2 35 1 content black bars will still appear on the top and bottom of the display image This option is only available when the TV is displaying a 720p 1080i source A You can change the input names that appear on the e Panoramic expands the display image to fill the screen AJN Input menu to make your devices easy to recognize Images may appear wider than intended If you are See Renaming Devices on the Input Menu on page watching widescreen 1 85 1 or 2 35 1 content black 39 for more information bars will still appear on the top and bottom of the display image This option is only available when the TV is displaying a 480i 480p source e Wide stretches a 4 3 aspect ratio picture to the edges of the scr
48. o skip Select language for analog and digital channels You can use the TV s Channels menu to VIZIO CHANNELS Channel Source Find Channels Partial Channel Search Add Analog Channel Skip Channel Analog Audio Digital Language A Antenna Stereo English 33 Selecting a Channel Source SETTING UP CHANNELS 1 On the remote control press Input and use the Arrow button to highlight TV antenna icon then press OK 2 Press the MENU button select Channels and press OK The CHANNELS menu is displayed 3 On the CHANNELS menu highlight Channel Source and using the left right Arrow buttons to select either Antenna or Cable Finding Channels The TV may need to scan for channels before it can display programs and their associated information A channel scan is required for free over the air channels using an antenna and cable channels from an out of the wall connection without a cable box Moving the TV to an area with different channels requires the TV to scan for channels again To perform an Auto Channel Scan 1 From the CHANNELS menu highlight Find Channels and press OK The auto channel scan begins 2 Wait until the channel scan is 100 complete Highlight Done and press OK 3 Press the EXIT button on the remote If the channel scan is cancelled the channels that were already discovered are retained A new channelscan will clear all channels VIZIO La FIND CHANNELS Channels Found
49. on the remote to highlight System and press OK The SYSTEM menu is displayed Highlight Power Indicator and press OK The POWER INDICATOR menu is displayed Use the Up Down Arrow buttons to select On or Off then press OK USING THE GUIDED SETUP MENU USING THE RESET amp ADMIN MENU Restoring the TV to Factory Default Settings All of the on screen menu settings can be reset to the factory default settings A To restore the TV to its factory default settings If you restore the TV to the factory default settings all changes you have made to the settings will be lost 1 Press the MENU button on the remote The on screen menu is displayed 2 Use the Arrow buttons on the remote to highlight System and press OK The SYSTEM menu is displayed 3 Highlight Reset amp Admin and press OK The RESET amp ADMIN menu is displayed 4 Highlight Reset TV to Factory Defaults and press OK 5 If you have changed the default parental control passcode type if now The TV displays Select Reset to restore all TV settings to factory defaults and clear all account information 6 Highlight Reset and press OK 7 Wait for the TV to turn off The TV will turn back on shortly afterward and the Setup App will begin 8 To view a demonstration of TV functions on start up select Store Demo gt On 46 The TV s Setup App can be used to easily set up the TV tuner To use guided setup l Press the MENU button on the
50. or On or Off on page 45 FRONT PANEL USING THE REMOTE INPUT Change the currently displayed input A V CONTROLS Control USB media player CLOSED CAPTIONS Open the closed caption menu EXIT Close the on screen menu OK Select the highlighted menu option BACK Go to the previous on screen menu VOLUME UP DOWN Increase or decrease loudness of the audio MUTE Turn the audio off or on NUMBER PAD Manually enter a channel WIDE Switch the display mode POWER Turn the TV on or off INFO Display the info window MENU Display the on screen menu ARROW Navigate the on screen menu GUIDE Display the info window V BUTTON Open the USB media player CHANNEL UP DOWN Change the channel LAST Return to the channel last viewed DASH Use with number pad to manually enter a digital sub channel For example 18 4 or 18 5 REMOTE CONTROL Replacing the Batteries 1 Remove the battery cover 2 Insert two batteries into the remote control Make sure that the and symbols on the batteries match the and symbols inside the battery compartment 3 Replace the battery cover 11 CONNECTING A DEVICE Your TV can be used to display output from most devices 1 Verify that your device has a video port that matches an available port on the TV HDMI Component etc Cable Satellite Box 2 Turn the TV and your device off 3 Connect the appropriate cable
51. our personal information VIZIO recommends that you always clear all personal information from the unit before it is serviced regardless of the servicer Zero Bright Pixel Defect Guarantee This policy covers zero bright pixel defects for the duration of the limited ONE YEAR WARRANTY on select new product purchases To determine if this guarantee applies to your product refer to the DETAILS tab of the model s product information page www VIZIO com or look for the zero bright pixel guarantee on the box Legal amp Compliance FCC Class B Radio Interference Statement NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures 1 Reorient or relocate the receiving antenna 2 Increase the separatio
52. r three connectors for video separated into red blue and green signals and the left and right audio connectors red and white e HD Video Resolutions up to 1080p e Analog Connection e Audio and Video Signals 00000 Pr Cr Pb Cb Y V BETTER 14 HDMI CABLE HDMI is the intelligent all digital interface that delivers both dazzling quality and unmatched ease of use HDMI technology transmits crystal clear digital video along with multi channel surround audio HDMI connected devices have the ability to automatically adjust themselves for optimal viewing e HD Video Resolutions up to 1080p e HD Audio e Digital Connection e Audio and Video Signals BEST CONNECTING AN AUDIO DEVICE Your TV can output sound to an audio device such as a receiver e nes Der S 1 Verify that your device has an audio port that matches an available port on the TV optical RCA etc Home Audio Receiver 2 Turn the TV and your audio device off 3 Connect the appropriate cable not included to the TV and the device 4 Turn the TV and your device on VIZIO Sound Bar HDMI CABLE CEC 2 WAY COMMUNICATION 2 0 5 1 DIGITAL AUDIO B EST PCM DTS DOLBY DIGITAL OPTICAL SPDIF CABLE PCM STREAM B ETTE R DOLBY DIGITAL 5 1 CHANNEL Cm DTS 5 1 CHANNEL M RCA CABLE ANALOG STEREO CONNECTION GOO D 2 0 CHANNEL 15 CONNECTING AN AUDIO DEVICE AUDIO CABLE TYPES RCA CABLE OPTICAL SPDIF CABLE
53. re ENERGY STAR requirements picture mode meets ENERGY STAR elements It can be used to sharpen non HD high Calibrated sets the picture Calibrated mode To reduce video delay definition content however it will not produce detail that settings to values perfect for Si la Per does not otherwise exist Co V lo oo AIR OHO ayer v 5 When you have finished adjusting the picture settings press BACK to adjust additional settings or EXIT e Calibrated Dark sets the picture settings to values perfect for watching TV in a dark room e Vivid sets the picture settings to values that produce a 22 Adjusting the More Picture Settings for mpeg files Select Off Low Medium or High To adjust the More Picture settings e Game Low Latency Reduces video delay lag when l From the PICTURE menu use the Arrow buttons to highlight gaming Select Off or On This option is not available for VIZIO devices connected using a coaxial cable e Picture Size amp Position Picture Size increases or More Picture and then press MORE PICTURE OK The MORE PICTURE menu is Color Temperature Cool decreases the vertical and horizontal size of the displayed Black Detail Vesna displayed picture Picture Position adjusts the vertical Backlight Control and horizontal positions of the picture to ensure the Use the Arrow buttons to Reduce Signal Nowe ton image is centered and completely fills the screen Use the highlight the setting
54. rpness Select Off Low Medium or High Reduce Block Noise Reduces pixelation and distortion 23 Adjusting the Picture Mode Edit Settings To adjust the Picture Mode Edit settings 1 From the PICTURE menu use the Arrow buttons to highlight VIZIO A More Picture gt Picture Mode lt PICTURE MODE EDIT Edit and then press the OK Save Picture Mode button The PICTURE MODE EDIT Lock Fens Mee menu is displayed Reset Picture Mode 2 Use the Arrow buttons to highlight the setting you wish to adjust then press the Left Right Arrow buttons to change the setting e Save Picture Mode Saves the settings for a custom picture mode e Lock Picture Mode Prevent allow changes to the currently selected custom picture mode Select On or Off e Reset Picture Mode Resets the picture mode settings to factory default values 3 When you have finished adjusting the Picture Mode Edit settings press BACK to adjust additional settings or EXIT 24 Adjusting the Color Calibration Settings Color Calibration Settings allow you to make precise adjustments to the picture and to create picture modes to save groups of picture settings The Color Tuner 11 Point White Balance and test AN patterns allow technicians to manually calibrate the TV Calibration requires specialized training an input with precisely set colors and a specialized light meter To adjust the color calibra picture settings 1 From the PICTURE menu u
55. se the Arrow buttons to highlight Color Calibration and press the OK button The COLOR CALIBRATION menu is RME displayed Color Tuner VIZIO A COLOR CALIBRATION Picture Mode Reset Color Temperature 2 Use the Arrow buttons to highlight the setting you wish to adjust then press the OK button to change the setting e Picture Mode Not directly selectable reference only Changes to Hue Saturation and Brightness are saved here and indicated with an asterisk e Color Temperature Not directly selectable reference only Changes to Offset and Gain are saved here and indicated with an asterisk e Color Tuner Adjust the HSB color RGB offsets and 11 point white balance and display calibration test patterns e Reset Color Tuner Temperature Prevent allow changes to the currently selected custom picture mode Adjusting the Color Tuner Settings The Color Tuner settings allow you to adjust the Hue Saturation and Brightness HSB color and 11 point white balance turn color channels off for testing and display color bar flat and ramp test patterns To adjust the HSB color settings 1 From the PICTURE menu use the Arrow buttons to highlight Color Calibration and press the OK button The COLOR CALIBRATION menu is displayed 2 Use the Arrow buttons to highlight Color Tuner and press the OK button The Color Tuner menu is displayed Color Tuner Red Green Blue Cyan Magenta Yellow Hue 0 0 0 0 25 14
56. st additional settings or EXIT To create modify or replace the single custom equalizer setting Ti Press the MENU button on the remote The on screen menu is displayed Use the Arrow buttons on the remote to highlight Audio and press OK The AUDIO menu is displayed Use the Arrow buttons to highlight Equalizer and press OK The Audio Mode and equalizer settings screen appears Use the Left and Right Arrow buttons to select any audio mode as a starting point Use the Arrow buttons to highlight a frequency and then press OK Use the Up and Down Arrow buttons to adjust the boost up and attenuation down for the frequency Use the Left and Right Arrow buttons to select another frequency if desired and adjust it Press the BACK button to adjust additional settings or EXIT 31 Deleting the Custom Audio Mode To delete the custom audio mode that has been created 1 Press the MENU button on the remote The on screen menu is displayed Use the Arrow buttons on the remote to highlight Audio and press OK The AUDIO menu is displayed Use the Arrow buttons to highlight Delete Audio Mode and press OK The TV displays To delete the user created custom audio mode select the Delete button Highlight Delete and press OK Press the BACK button to adjust additional settings or EXIT SETTING TIMERS This TV has several timers to save energy and to turn off when you go to sleep Setting the Sle
57. st the picture settings brilliance of the picture Backlight cannot be adjusted when starting from some picture modes pa ee eee ONE VIZIO a e Brightness Adjusts the black level of the picture When remote The on screen menu is ie kt displayed PICTURE this setting is too low the picture may be too dark to Picture Mode Standard distinguish details When this setting is too high the 2 Use the Arrow buttons on the Backlight Cr 65 picture may appear faded or washed out remote to highlight Picture and Brighiness 50 e Contrast Adjusts the white level of the picture When press OK The PICTURE menu is Contrast 50 this setting is too low the picture may appear dark When displayed Color Emm 5 this setting is too high the picture may appear faded bee Atowbulaeon he Tint 0 or washed out If the setting is too high or too low detail Sharpness 9 may be difficult to distinguish in dark or bright areas of remote to highlight Picture Mode then use the Left Right Moe Pietie ihe picture Arrow buttons to change the Picture Mode Ealt e Color Adjusts the intensity of the picture colors Color Calibration picture mode e Tint Adjusts the hue of the picture This setting is useful Standard sets the various in adjusting the flesh tones in the picture If flesh appears picture settings to values too orange reduce the level of color before adjusting tint that meet RE at AEE Pees e Sharpness Adjusts the edge sharpness of pictu
58. tandard Auto Brightness Control Backlight Brightness Contrast Color Tint Sharpness More Picture Picture Mode Edit PicModename Color Calibration VIZIO PICTURE Picture Mode Standard Auto Brightness Control Backlight Brightness Contrast Color Tint Sharpness More Picture Picture Mode Edit PicModeName Color Calibration PICTURE Picture Mode Standard Auto Brightness Control Backlight Brighiness Contrast Color Tint Sharpness More Picture Picture Mode Edit PicModeName Color Calibration FULL SIZED AND ALIGNED TO RIGHT OF MENU ADJUSTING THE PICTURE SETTINGS brighter more vivid picture e Game reduces throughput delays and optimizes the Your TV display can be adjusted to suit your preferences and picture settings for displaying game console output Menno onean e Computer optimizes the picture settings for displaying ay When changes are made while a preset picture computer output A S mode is selected an asterisk appears after the name 4 To manually change each of the picture settings use the of the picture mode These settings can be saved as Up Down Arrow buttons on the remote to highlight that a new custom picture mode and the preset mode picture setting then use the Left Right Arrow buttons to can be reset to its default settings see Creating a adjust the setting Custom Picture Mode on page 28 a e Backlight Adjusts the LED brightness to affect the overall To adju
59. ternate language using Secondary Audio Programming SAP Not all programs are broadcast in SAP The Analog Audio Language feature only works when the program being viewed is being broadcast with Secondary Audio Programming To use the Analog Audio feature 1 From the CHANNELS menu highlight Analog Audio and press OK The ANALOG AUDIO menu is displayed VIZIO ANALOG AUDIO Stereo SAP 2 Select Stereo SAP secondary Mono audio programming or Mono Press OK 3 Press BACK to adjust additional settings or EXIT Changing the Digital Audio Language Some digital over the air free cable and satellite channels broadcast programs in more than one language The TV s Digital Audio feature allows you to listen to audio in alternate languages Not all programs are broadcast in alternate A languages The Digital Audio Language feature only works when the program being viewed is being broadcast in the language you select 1 From the CHANNELS menu highlight Digital Language VIZIO A and press OK The DIGITAL DIGITAL LANGUAGE LANGUAGE menu is displayed English Espanol 2 Select your preferred language Fe English Fran ais or Espa ol and press OK 3 Press BACK to adjust additional settings or EXIT SETTING UP CLOSED CAPTIONING Your TV can display closed captions for programs that include them Closed captions display a transcription of a program s dialogue l Wy If the program you are viewing is not
60. the folder path ce Photo ed Start Slideshow Sort View Thumbnails Adjust Slideshow Settings View Music Files Browse Music File Name D 1920x1080 Resolution 1920x1080 Size 1607270KB Photo Information Displays the name resolution and file size of the currently selected photo VIZIO_2GB Photo root LE re H jpg Page 1 of 1 Page Information If your USB thumb drive has more fles than can be displayed on a single screen the page information is displayed here 49 Folder Contents This area displays the contents of the currently selected folder You can browse files and folders using the Arrow and OK buttons on the remote PHOTO VIEWER Troubleshooting amp Technical Support A Do you have questions Find answers here SUPPORT VIZIO COM Find help with e New product setup e Connecting your devices e Technical problems e Product updates and more tii Live chat support available vira product Support You can also contact our award winning support team Phone 877 698 4946 toll free Email techsupport VIZIO com Hours of Operation Monday Friday 7 am To 11 PM CST a Saturday Sunday 9 am To 6 pm CST The TV displays No Signal Press the INPUT button on the remote control to select a different input source If you are using an antenna or cable TV connected directly to the TV scan for channels See Finding Channels on page 33 Th
61. tings To lock all custom picture modes 1 From the PICTURE menu use the Arrow buttons to highlight Picture Mode Edit and select Lock or Unlock Picture Mode then press OK The LOCK PICTURE MODE menu is displayed VIZIO La LOCK PICTURE MODE Create a picture control PIN to prevent change to all custom picture modes 2 Use the Number Pad on your remote fo enter a unique Save 4 digit PIN 3 Highlight Save and then press the OK button 4 Press the EXIT button to exit the menu screens Create a 4 digit passcode using the num ber keys on the remote To unlock all Custom picture modes 5 From the PICTURE menu use the Arrow buttons to highlight Picture Mode Edit and select Lock or Unlock Picture Mode then press OK The LOCK PICTURE MODE menu is displayed 6 Use the Number Pad on your remote to enter your 4 digit PIN 7 Make any desired changes to the picture modes 8 To relock picture modes you must create a new 4 digit PIN Deleting a Custom Picture Mode Custom picture modes that are no longer needed can be deleted 2 Inputs assigned to a deleted custom picture mode become assigned to the Calibrated picture mode oN To delete a custom picture mode 1 From the PICTURE menu use the Arrow buttons to highlight Picture Mode Edit and select Lock or Unlock Picture Mode Delete Cancel then press OK The DELETE PICTURE MODE window is displayed To delete the user created Custom 1 p
62. tom parental passcode see Changing the Parental Control Passcode on page 43 I A AdS 42 Enabling or Disabling Program Ratings To manage program content according to its rating you must enable the Program Rating feature To enable or disable the Program Rating feature From the PARENTAL CONTROLS menu highlight Locks and use the left right Arrow buttons to select On enable or Off disable Locking and Unlocking Channels When a channel is locked it will be inaccessible Locking a channel is a good way to prevent children from viewing inappropriate material To lock or unlock a channel 1 From the PARENTAL CONTROLS menu highlight Channel Locks and press OK The CHANNEL LOCKS menu is displayed 2 Highlight the channel you want to lock or unlock and press OK 3 When a channel is locked the Lock icon appears locked The channel is not accessible unless the parental passcode is entered 4 When a channel is unlocked the Lock icon appears unlocked The channel is accessible Blocking and Unblocking Content by Rating A channel may sometimes broadcast programs that are meant for children and at other times broadcast programs that are meant for mature audiences You may not want to block the channel completely using a channel lock but you may wish to block certain programs from being viewed When this is the case you can use the TV s Rating Block feature to block content based on its rating 2 For a list

VIZIO D39h-C0 LED HDTV User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents