152.762 3D OBJECTS
Contents
1. 16 Z axis rotation 001 215 Z axis rotational position manual adjust True 3D effect 216 255 Z axis auto rotation Brighter 638nm Red laser technology 17 Adjust speed 1 When channel 16 is 216 255 adjust Z axis for CH16 dus auto rotation speed 0 45W total laser power Red 100mW Green 50mW Blue 300mW 000 Nowrting Auto sound to light pattern select and 20 channel DMX modes 18 Writing 001 254 Writing manually Master slave mode Auto writing 255 Autowriting Easy digital display to set the mode of operation 19 Adjust speed 000 255 When channel 18 is 255 adjust writing for CH18 speed Key controlled for laser safety 20 Scan speed 000 255 Adjust scanning speed We recommend that this product is used within the guidelines HSG95 Please note Channel 3 20 is effective only under DMX 2 mode 152 762UK User Manual 152 762UK User Manual Value 000 010 Black out 011 062 Sound control 1 Mode qtx US qtx 2 Gobos and e Please read this manual fully before installing or operating this programs choose product as it contains important safety information relating to its sebe ARR iip 3 Strobe 4 Colour select A e This Class 3B laser product emits hazardous levels of optical 5 Adjust speed 000 255 When channel 4 is 200 255 adjust colour radiation and will cause injury to the eyes if viewed directly for CH4 change speed Slow to fast 000 Centre O2. 6 X axis adjust 001 254 Manually adjust X axis position Pattern moves along the X axis 7 Adjust speed 000 255 When channel 6 is 255 adjust auto moving e This product is not suitable for projection directly at audiences or for CH6 l speed other personnel 000 Centre 0 0 0 000 8 Y axis adjust 001 254 Adjust the position of the Y axis Pattern moves along the Y axis fon e Cee e Sianna nnii e This product must not be used for any form of audience scanning 000 Static 2 O Pppicesomsneusionpronssonse nes nny 10 Zoom in out 001 254 Manually adjust the pattern size Zoom in out repeatedly aa a speed 000 255 When channel 10 is 255 adjust zoom speed 000 Norotation 1 12 X axis rotation 001 219 X axis rotational position manual adjust 220 255 X axis auto rotation 13 Adjust speed 000 255 When channel 12 is 220 255 adjust X axis for CH12 auto rotation speed 152 762UK User Manual 152 762UK User Manual WG qtx IMPORTANT INFOMATION This product is a Class 3B laser and should only be installed and used by personal who are trained in the management of laser radiation and are able to operate in accordance within the guidance given by the Health and Safety Executive HSE in HS G 95 The Radiation Safety of Lasers used for Display purposes Copies of this guide can be downloaded from the HSE website below www hse gov uk pubns priced hsg95 pdf This product contains n
3. BJECTS LASER VERTICAL BIRDS EYE VIEW DMX 512 es Audience exclusion zone QUE V MENU UP DOWN ENTER d a P Press the MENU button to enter setup mode followed by the UP amp DOWN keys to select the mode you desire To confirm your selection press ENTER Laser projection should be at least 3m above audience and should be below balcony level Audience allowed in this zone Laser projector Balcony AUt Auto running random effects cycle SOU Sound activated random effects cycle qe c 152 762UK User Manual 152 762UK User Manual UZ qtx VERTICAL CROSS SECTIONAL VIEW B ES et QM ant o er eem s oo an MUNERA OE tere vase oS ERE TRECE ae ol L 27 T ed R oe en ou Qe ction sh ate L diii Laser proje Laser projector w E E a Audience allowed in this zone l LS RENA Ded Y IY ERA Nd St N24 152 762UK User Manual UZ qtx REAR PANAL 3D OBJECTS LASER 1 3 8 ofr T Jon O LT no O O POWER SAFETY KEY o e OF MODE DOWN ENTER 9 O AC 230Mac 50Hz JUND D S FUSE F2A SENSITIVITY D Power ON OFF Switch IEC Power IN Digital display Sound sensitivity Microphone DMX OUT DMX IN Safety Key Yo a i LE IN aS 152 762UK User Manual E qtx UZ qtx LAYOUT 3D OBJECTS LASER PACKAGE CONTENTS Please check the contents to ensure that the product has been received in good condition IEC Power Lead x 1pc Safety K
4. WG qtx TECHNICAL SPECIFICATION Voltage 230Vac 50 60Hz Blue 300mW 455nm Fuse 2A Slow blow DMX Channels 20 Di i 22 17 Laser Class 3B nensions 0 x 176 x 99mm Red Laser 100mW 638nm Power Consumption 45W Green Power 50mW 532nm Weight 1 6ka IMPORTANT NOTE This product conformed to Laser amp LED Safety standard BSEN60825 1 2007 incorporating corrigendum 2008 DISPOSAL Please disposal of the unserviceable device according to the current statutory requirement Errors and omissions excepted Copyright 2012 AVSL Group Ltd 152 762UK User Manual E qtx 3D OBJECTS RGB LASER Order ref 152 762UK User Manual IMPORTANT SAFETY NOTICE Please Read this manual before operating VERSION 1 0 an Zed group brand WG qtx WG qtx INTRODUCTION Cont 3D OBJECTS RGB LASER 000 Norotation 1 0 0 Thank you for purchasing this 3D Objects laser 14 Y axis rotation 001 219 Y axis rotational position manual adjust 220 255 Y axis auto rotation A laser unlike any other featuring innovative projection technology This laser creates unique 15 Adjust speed When channel 14 is 220 255 adjust Y axis solid 3D patterns that warp and rotate when projected on to a flat surface A truly for CH14 000 255 3uto r tation eed mesmerizing effect perfect for any lighting rig Operated in either stand alone auto mode 00 N tati E o rotation sound to light individual pattern select mode or DMX
5. eys x 2pcs If you find any accessory is missing or the product has arrived with any problems please contact your retailer at once This product contains no user serviceable parts so make no attempt to try to fix or modify this item yourself as this will invalidate the warranty We recommend you keep the original package and proof of purchase for any possible replacement or returned demand SETUP Unpack the laser ensuring all packaging and tape is removed Always test the laser before fixing in a permanent location 1 2 3 Connect the IEC mains plug and power up 4 1 Mounting bracket 2 humb screw 3 Laser Aperture Insert the safety key and turn to a quarter turn clockwise At this moment ensure that no one is exposed to laser radiation d Select which mode you want to operate the laser in 6 Leave the laser to run for 10 minutes before installing in its location 152 762UK User Manual 152 762UK User Manual WG qtx CONNECT WITH POWER SUPPLY THE GROUND WIRE MUST BE CONNECTED Use the supplied IEC lead to connect to the main power supply as follows We Nem Yellow Oye I For your safety please kindly pay attention to all of the warnings below Always plug in the power plug last and disconnect from the mains when the device is not in use or before cleaning Do not install and operate the device in rain or extreme heat moisture or dusty environments This device is for indoor
6. o user serviceable parts Under no circumstances should any attempt be made by the user to dismantle or modify it in any way INSTALLATION AND MOUNTING INSTRUCTIONS This product must be securely mounted so that its emission is always directed away from people and objects that are able to reflect the emission towards people In this regard the separation distances of 3 metres vertically and 2 5 metres horizontally cited in HS G 95 and shown overleaf must be observed 152 762UK User Manual WG qtx DMX The fixture is equipped with 3 pin XLR connectors for DMX input and output The SE connectors are wired in parallel Only use a shielded twisted pair cable designed for 3 pin XLR plugs and connectors in order to connect the controller with the fixture or one fixture with another DMX output DMX input XLR mounting sockets rear view XLR mounting plugs rear view 1 Shield 2 Signal 3 Signal Building a serial DMX chain DMX 512 Controller operation i Master slave o o po operation Caution At the last fixture the DMX cable has to end with a terminator Solder a 120 Ohm resistor between PIN 2 and PIN 3 into a 3 pin XLR plug and plug it in the DMX output of the last fixture When in DMX mode there are two channels with the following function 152 762UK User Manual UZ qtx qtx OPERATION FOR 3D O
7. t from the mains power supply then remove the fuse holder above the IEC Socket to reveal the fuse Replace with the correct fuse rating as stated on the product or in the user manual Then lock the fuse holder cover back into place GENERAL MAINTENANCE Be sure to power off the fixture before conducting maintenance To maintain optimum performance and minimise wear fixtures should be cleaned frequently Usage and environment are contributing factors in determining frequency As a general rule fixtures should be cleaned at least twice a month Dust build up reduces light output amp performance as well as overheating This can lead to reduced life and increased mechanical wear Unplug fixture from power Use a vacuum or air compressor and a soft brush to remove dust collected on external vents and internal components Clean all glass when fixture is cold with a mild solution to the cloth or tissue and drag dirt and grime to the outside of the lens Gently polish optical surfaces until they are free of haze and lint The cleaning of internal and external optical lenses and or mirrors must be carried out periodically to optimise light output Cleaning frequently depends on the environment in which the fixture operates damp smoky or particularly dirty surroundings can require cleaning fluid Always dry the parts carefully Clean the external optics at least every 20 days 152 762UK User Manual
8. use only and in a dry environment Do not switch on immediately Wait until the unit reaches room temperature Do not shake the device and avoid brute force when installing or operating Do not use the device during thunderstorms and please disconnect the power Do not use solvents or aggressive detergent to clean the device Use a soft and clean cloth Do not modify the device or the connected power cord without authorisation Do not stare into the aperture This product emits hazardous levels of optical radiation and will cause serious injury to the eyes if viewed at close range This product should be securely mounted so that its output emission is always directed away from people and at objects that are able to reflect emission towards people In this regard the separation distances cited in HS G 95 should be observed The symbol l mE determines the minimum distance from lighted objects The minimum distance between light output and the illuminated surface must be more than 0 5m 152 762UK User Manual WG qtx TROUBLESHOOTING If the unit is not functioning properly Check that the IEC cable is connected properly Check that the mains power switch is on Check the fuse hasn t blown see below guide Check that the unit isn t in DMX mode Check the safety key is turned to the on position f in sound to light mode ensure the microphone sensitivity is turned up REPLACING FUSE First disconnec
Download Pdf Manuals
Related Search