BlueConnect Generation 1 User Guide
Contents
1. The phonebook entries are listed 2 At the end of the list BlueConnect asks End of list would you like to start from the beginning Say Yes to hear the phonebook entry list again or No if you do not want to hear it again Or After you hear the phonebook entry that you want to call press the i BlueConnect VR button to stop the list process 4 Say Call to call the last name listed 5 BlueConnect gives the selected name and its locations It then asks for the location you want to call 6 Say the location you want to call BlueConnect says who and where it is calling and asks if this is 7 correct Y N If it is BlueConnect responds with Dialing and dials the selected number Deleting a phonebook name or location At the main menu say Phonebook Delete When prompted say the Name to delete If only one location exists for the name BlueConnect will verify that 2 you want to delete the name and location and then deletes it Or If that name exists and there are more than one location for the name BlueConnect reads you a list of locations for the name 3 Say the location to delete or say All to delete all locations for this name BlueConnect verifies that you want to delete the location Y N and then deletes it 13 14 Phonebook Continued Use this command only if you want to erase delete the entire phonebook BlueConnect2. gence Autolntell riving Ideas D ig Y 0 S Connected Integrated S S 5 2 USER GUIDE TABLE OF CONTENTS INTRODUCTION Pg Pg WHAT IS BLUECONNECT 2 LOCATING AN INSTALLER 18 WHAT CELL PHONES WORK 2 DEFECTIVE DAMAGED MERCHANDISE CUSTOMER CONTACT INFORMATION 2 WHAT TO DO 19 WARNINGS PLEASE READ 3 PRODUCT RETURNS 19 GETTING STARTED 4 MISCELLANEOUS BLUECONNECT UIB USER INTERFACE BOARD 5 REGISTERING YOUR PRODUCT 20 FUNCTION OVERVIEW 6 CONTACTING CUSTOMER SERVICE 20 SET UP PRODUCT COMPLIANCE 20 PHONE PAIRING 7 PRODUCT WARRANTY 21 CLEAR PAIRED PHONE S 8 PRODUCT FUNCTIONS LIST PAIRED PHONE S 8 CALL REJECT 22 CONFIRMATION PROMPTS 9 CALL WAITING 22 SELECT PHONE 10 DIGIT STRING CALLING 22 MAKING A CALL EMERGENCY 22 USING THE CALL FEATURE 11 INCOMING CALLS 22 USING THE DIAL FEATURE 11 MUTE A CALL 22 USING THE REDIAL FEATURE 11 REDIAL A NUMBER 22 PHONEBOOK THREE WAY CALLING 22 ADDING A NEW NAME 12 TRANSFER A CALL 22 ADDING A NEW LOCATION 12 VR VOICE RECOGNITION BUTTON 22 EDITING A NUMBER 13 LISTING NAMES 13 INDEX 23 DELETE A NAME OR LOCATION 13 ERASE ALL 14 TROUBLESHOOTING MY PHONE WILL NOT PAIR 14 A PAIRED PHONE WILL NOT LINK CONNECT 15 CAN NOT RECEIVE INCOMING CALLS 15 CAN NOT PLACE A CALL 15 CAN HEAR BUT THEY CAN NOT HEAR
3. will now ask you for a 8 phone priority from 1 to 7 Number 1 is the highest priority If two phones are paired BlueConnect will use the higher priority phone when both phones are within range Say the phone priority for example One 9 When complete BlueConnect will indicate Pairing Complete Clear Paired Phones You must clear a paired phone from BlueConnect in order to remove it from being paired BlueConnect will respond with Phone not available if you attempt to use a previously cleared phone to make a call If you make a mistake during the clearing process or decide not to clear a phone press the BlueConnect PHONE button or the VR button and say cancel to exit the clearing mode To re prioritize cell phones you must first clear the phone s paired with BlueConnect and then re pair the phones with the new desired priorities If you are not currently in a VR session or on a phone call press and releasd the PHONE button and say Set Up otherwise go to the main menu and say Set Up 2 Say Phone Pairing 3 After BlueConnect prompts you say Delete a phone BlueConnect prompts you for the number associated with the priority of the 4 phone you would like to clear For Example Say one for Jacob s phone say two for Robin s mobile Say the number of phone you wish to delete 5 BlueConnect resp
4. prompts you two times to be sure you do want to delete the phonebook Erasing all phonebook records 1 At the main menu say Phonebook Erase All to delete all phonebook records BlueConnect responds Are you sure you want to erase everything 2 from your system phonebook Say No if you do not want to delete all phonebook records BlueConnect exits the Erase All process or Say Yes to delete all phonebook records BlueConnect responds 3 You are about to delete everything from your system phonebook Do you want to continue Say No if you do not want to delete all phonebook records BlueConnect exits the Erase All process or Say Yes to delete all 4 phonebook records BlueConnect deletes all phonebook records and says Phonebook Erased Troubleshooting My Phone will not pair CHECK POSSIBLE SOLUTIONS Phone and BlueConnect have power Make sure that the phone and vehicle ignition is ON Also make sure that your phone battery is charged Phone is designed to work with BlueConnect Your phone may not work with BlueConnect Only phones with Bluetooth capability and a handsfree profile will work with BlueConnect Phones that support the use of a wireless headset should work with BlueConnect You can go to www ciblueconnect com and view a list of approved BlueConnect Bluetooth handsfree profile phones Phone was paired properly Refer to the phone s pairing inst
5. of compatible cell phones You can also contact your local authorized BlueConnect or cell phone provider Customer Contact Information Reference USA Canada an JCI NAC Al Support 1 888 528 7930 1 866 343 3025 01 765 282 3825 Al NAC Al Sales 1 888 454 4440 1 765 289 1586 1 866 343 3025 01 765 289 1586 Service amp 1 800 406 7132 Warranty 1 765 282 3825 1 866 343 3025 01 765 282 3825 Al Installation 1 800 406 7132 1 765 282 3825 1 866 343 3025 01 765 282 3825 Web Site www jciblueconnect com www autointelligence com Autolntelligence may find it necessary to change or end our policies regulations and special offers at any time We reserve the right to do so without notice AD Autolntelligence Driving Ideas WARNINGS PLEASE READ Be Safe When using a handsfree cellular device in a vehicle the vehicle operator is solely responsible for operating the vehicle in a safe manner Vehicle operators must maintain full surveillance of all pertinent driving conditions at all times An accident or collision resulting in damage of property personal injury or death could occur if the operator of the vehicle fails to pay attention to travel conditions and vehicle operation while the vehicle is in motion DO NOT program attempt to program adjust or set up your BlueConnect unit while the vehicle is moving Your vehicle should be in park wit
6. the number Turning the confirmation prompts ON and OFF 4 Go to the BlueConnect main menu and say Set Up BlueConnect prompts you with available options 2 Say Confirmation prompts 3 If the confirmation prompts are ON BlueConnect will ask if you want to turn them OFF 4 Say Yes BlueConnect will tell you that they are OFF and says Ready Or 5 If the confirmation prompts are OFF BlueConnect will tell you that they are OFF and will ask if you want them to be turned ON 6 Say Yes to turn them ON BlueConnect will then return to the main menu 10 Select A Phone This option is used to over ride the phone priority given during pairing For example if you wish to use phone three to make an outgoing call you would select phone three and make the call This over ride only works the current ignition on cycle for one call BlueConnect switches back to the highest priority phone once the ignition is turned off You can select a phone using the VR button during a phone listing or by the select phone command Select phone by name At the main menu say Set Up Phone Pairing BlueConnect prompts you with available options Say List Paired Phone BlueConnect lists all phones that are paired to it When the name of the desired phone is heard press and release the VR button and say Select BlueConnect sets this phone to the highest priority for the res
7. 2 V Confirmation Prompts 9 N O Vehicle Compatibility 2 Contact Sales 2 Original Sales Receipt 21 Volume Buttons 5 Contact Service amp Warranty 2 P VR Voice Recognition 5 17 22 Contact Technical Support 2 Pairing Mode 7 W Customer Contact Information 2 Button 5 Warranty 21 Customer Service 20 Phone Compatibility 2 Warranty Period 21 D Phone Not Available 8 Web Site 2 Deactivation Button 5 Phone Operational Manual 7 Defective or Damaged Merchandise 19 21 Phone Pairing 7 14 1 Definition BlueConnect 2 Phone Priority Zr Delete A Phone 8 Phonebook 12 Deleting A Location 13 PIN 7 14 Deleting A Name 13 Precautions 3 Dial Feature 11 Product Compliance 20 Digit String 22 Product Functions 22 DTMF Tones 5 Product Phone Support 20 E Product Registration 20 21 Editing A Number 13 Product Returns 19 21 Emergency 22 Product Serial Number 21 Erase All Names 14 Programming Safety 3 23 Notes AD Autolntelligence Driving Ideas 1300 W 23 St Muncie IN 47302 www autointelligence com 1 800 406 7132 BlueConnect is a registered trademark of Johnson controls SD 1035 REV 10 24 05
8. Connect If the audio quality is still poor with BlueConnect then either contact your local BlueConnect provider or Autolntelligence If the audio quality is poor on your cell phone then contact your phone provider carrier to verify that your phone has the latest firmware Phone has adequate cell signal strength Check the signal strength icon on your phone Avoid using the phone and BlueConnect in areas where the signal strength is poor and unable to provide a good conversation in both directions Phone is in the vehicle Place phone closer to BlueConnect module ie the center of front seat area of the vehicle I Am Told That Sound Bad CHECK POSSIBLE SOLUTIONS There is not an abnormal amount of noise inside of the vehicle while using BlueConnect Try eliminating any additional noise by rolling up the windows turning the heater ac blower fan down and reducing any loud noises or talking while using BlueConnect Your BlueConnect unit may also pick up road noise Try to avoid using BlueConnect when traveling on extremely rough roads If they hear a lot of distortion You may have a firmware issue Verify the latest phone firmware is being used Contact your phone provider carrier 16 Troubleshooting The Voice Recognition is Not Working CHECK POSSIBLE SOLUTIONS There is not an abnormal amount of noise inside of Try eliminating any additional noise by rol
9. ME 16 THE AUDIO GOES MUTE BOTH WAYS DURING A 16 CALL THE AUDIO QUALITY IS POOR 16 AM TOLD THAT SOUND BAD 16 THE SPEECH RECOGNITION IS NOT WORKING 17 IT WILL NOT CALL THE NAME GIVEN TO IT 17 CAN NOT SELECT A PHONE 17 HELP GETTING HELP 17 PRODUCT INSTALLATION INSTALLING BLUECONNECTO 18 What is BlueConnect BlueConnect is a state of the art integrated hands free phone communication system for your vehicle Developed by Johnson Controls Inc BlueConnect utilizes Bluetooth wireless technology and Bluetooth hands free profiled cell phones to improve cell phone use and convenience BlueConnect eliminates the need to hold a handheld cell phone wear a headset or earpiece or use an in vehicle mounted handset adapter while making or receiving phone calls BlueConnect is easy to use because it is voice activated and it can be installed in almost any vehicle new or used BlueConnect requires professional installation by an approved BlueConnect installer BlueConnect is a registered trademark of Johnson Controls What cell phones will work with BlueConnect Due to the versatility of Bluetooth wireless technology not all cell phones share the same Bluetooth profile and may not work properly with BlueConnect Only cell phones that are Bluetooth enabled and support a handsfree profile are compatible with BlueConnect You can go to www jciblueconnect com to see a list
10. complete and return the enclosed warranty card or you can register on line at www autointelligence com register Free product phone support is available for registered owners This includes basic product pairing and set up checking that the product is installed and working properly verifying product connectivity and hardware functionality The complimentary support expires 90 days from the date of purchase Contacting Customer Service Before contacting support please have the following information available as listed below before calling technical support the first time Customer Name Email Address Product Model Purchase Date Serial required Detailed description of problem Return Authorization RA Number if applicable We reserve the right to make changes or improvements in our products from time to time without incurring the obligation to install such improvements or changes on equipment or items previously manufactured Reminder You must retain the sales slip or sales receipt proving the date of your original purchase in case warranty service is ever required To receive product service contact your local Authorized BlueConnect provider or contact Autolntelligence at 800 406 7132 or www autointelligence com Product Compliance This device complies with FCC rules part 15 Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept a
11. e be liable for incidental special direct indirect consequential incidental or multiple damages such as but not limited to lost business or profits arising out of the sale or use of any Product even if Autolntelligence is advised of the possibility of such damages except as expressly provided herein This warranty gives you specific legal rights and you may also have other rights which vary from state to state Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply Product Functions u Call Reject 1 Use this feature when on a call to reject a second incoming call 2 Letthe double beep play three times Call Waiting 1 Use this feature to place a call on wait or hold 2 Press and release the VR button to place a call on hold 3 Press and release it again to retrieve the call on hold Digit String 1 BlueConnect will allow you to send lt digits gt to far end as touch tones DTMF 2 Use this feature in the event you need to dial into voice mail or an automated system 3 Push VR button and number sequence and then say Send 4 Example 1 2 3 4 5 Send Emergency 1 THIS IS NOT A SAFETY LIFE SAVING OR AUTOMATIC EMERGENCY RESPONSE FEATURE OR SYSTEM 2 This feature in order to function properly requires that a 911 service is available and that BlueConnect is paired to a cell phone which is on and in the ve
12. eConnect to your cell phone 2 Press and release the VR button again and say Transfer Call to transfer the call from your cell phone back to BlueConnect VR Voice Recognition Button 1 Pressing and releasing the VR button interrupts the system and tells BlueConnect to listen for a command 2 Pressing and releasing the VR button does not interfere with the person on the other end of the call Index A F Prompts 4 9 Adding A Name 12 Function Overview 6 Q R Adding A New Location 12 G Redial feature 11 22 Approved Installer 18 Getting Started 4 Return Authorization 19 Audio Quality 16 H S B Hands Free Profile 2 Safety amp Warnings 3 Barge In Button 5 Help 4 17 Select A Phone 10 17 Beeps 4 5 Hold Call 22 Set Up Command 7 Blue LED Light 5 SIM Card 14 BlueConnect Commands 6 Incoming Calla 22 Speaker 5 BlueTooth 2 Installation Requirements 2 18 T Button Functions 5 J Table of Contents 1 Johnson Controls 2 Three way Call 22 Call Feature 11 K L Transfer A Call 22 Call Waiting 22 Legal Rights 21 Troubleshooting 14 17 Cancel 4 List Paired Phones 8 U Cell Phone Battery 4 Listing Names 13 UIB 5 Cell Phone Firmware 16 Locating An Installer 18 UIB Buttons 5 Cell Phone Requirements 2 4 M Unit Power Down 4 Cell Phone Signal 4 Microphone 6 User Interface Board 5 Clear Paired Phones 8 Mute 16 2
13. early without shouting Do not speak slowly or pronounce words more distinctly than you normally would BlueConnect will automatically prompt you for a verbal response when the confirmation prompt feature is turned on Make sure the prompt feature is turned on on your BlueConnect unit before programming or when following any prompted instructions outlined in this user guide You can say cancel to return to the main menu or help to hear a list of available options anytime BlueConnect prompts you for a response When using BlueConnect wait to speak until after the beep is heard which follows the appropriate prompt If no response is given to a BlueConnect prompt it will repeat the prompt two more times until the user selects an option If there is still no option selected BlueConnect will power down 0000 4 5 O BlueConnect UIB User Interface Board Phone Button or Activation Deactivation Button Push to set up and program unit Push to make a call if not on a call Push to end a call Push to accept or reject an incoming call when on another call Volume Up 8 Down Buttons Push to increase the volume Push to decrease the volume Push either button to the desired volume level when the unit is not activated Audible beeps indicate the current volume level Speaker Blue L E D Light A blue light comes on indicating that the unit is activa
14. ect was not inadvertently set back to the See your phone s user guide for Bluetooth settings default is not set to automatically link connect to the BlueConnect Can t Receive Incoming Calls CHECK POSSIBLE SOLUTIONS Vehicle s ignition is ON Turn your vehicle ignition to the ON position You are pressing the correct button on BlueConnect Press the PHONE button to answer an incoming call and to answer the call not the VR button on BlueConnect Phone is paired and linked to BlueConnect Use the BlueConnect Set Up command at the main menu and then Select Phone command to link to the desired phone Phone is not outside of the vehicle Place the phone inside of the vehicle to ensure a good connection Can t Place a Call CHECK POSSIBLE SOLUTIONS Phone is turned ON Turn your phone ON BlueConnect will only work when the paired cell phone is turned ON The vehicle ignition is in the ON position Turn your vehicle ignition to the ON position You have an adequate cell phone signal Check the signal icon on your phone for signal You may have to wait until you are in an area that provides you with a stronger signal before making a call BlueConnect uses the signal going to the paired cell phone It does not increase or decrease cell phone signal strength Phone is paired and properly linked to BlueConnect Your phone may not be paired properly See your
15. elp at the main menu and BlueConnect prompts available options are Call Dial Phonebook Redial Emergency or Set Up 18 Product Installation DO NOT ATTEMPT TO INSTALL THIS PRODUCT YOURSELF Installing BlueConnect 1 BlueConnect should be installed by an approved BlueConnect installer or by a professional mobile electronics installer BlueConnect installation requires cutting a hole in either your overhead console or headliner Installation instructions and a cutting template are included and should be provided to the installer Improper testing installation alteration modification or adjustment of this product or any of its components can cause damage to the product your vehicle and to your vehicle s wiring system It is the buyer s responsibility to advise their installer to contact us immediately if he or she has any questions or concerns regarding the installation of this product prior to its installation The warranty on this product does not cover damage caused by or attributed to those items listed in number 4 Autolntelligence is not responsible or liable for product or vehicle damage caused by those items listed in number 4 Locating An Installer in Your Area Contact Autolntelligence or go to www autointelligence com for a list of approved BlueConnect installers in your area 19 Defective Damaged Merchandise WHAT TO DO If you suspect t
16. h the ignition turned to the on or acc accessory position DO NOT program attempt to program adjust or set up your BlueConnect unit while the vehicle is inside and the engine is on Failure to follow these precautions could result in property damage serious injury and death for yourself pets or other people near the vehicle from carbon monoxide for example if the vehicle s engine is running in a garage with the garage door closed or from physical impact if the vehicle should slip out of park and into gear with the engine running Getting Started Fully charge your cell phone s battery before programming your BlueConnect unit to ensure that the wireless electronic connection will be established with minimal difficulty Try to maintain a fully charged cell phone battery when using BlueConnect BlueConnect will not increase or decrease your cell phone s signal strength because it operates using the same signal as your cell phone Keep your cell phone on and inside of your vehicle s interior cabin so it can transmit properly to BlueConnect Do not place your cell phone in a metal box or similar container Your vehicle may require that the ignition switch be turned to either the acc or on position for programming and operation of BlueConnect This BlueConnect version is programmed for English translation only When using BlueConnect face the windshield and speak in your normal voice cl
17. hat you have a defective or damaged product 1 2 3 4 Before returning this product refer to the Troubleshooting sections as outlined in this document and perform the checks and solutions listed If you are still having difficulty contact Autolntelligence Technical Support It is important that you have all of your product information available before contacting Technical Support Our technicians will then help you determine if a repair or return is required If it is determined that repair or return is required 1 2 You must first contact Autolntelligence to determine if a return is necessary before returning your product Customer service may be able to resolve your problem over the phone without returning your product Areturn authorization or approval number is issued on all product returns Products returned without an authorization number will not be processed Autolntelligence will not issue refunds or offer product upgrades on returns without an authorization or approval number All product returns must be packaged securely and safely to avoid any further damage and include a copy of the original purchase sales receipt All returns are to be sent to Autolntelligence QC Dept at 1300 W 23 St Muncie IN USA 47302 Autolntelligence is not responsible for shipping costs or lost or misdirected shipments 20 Miscellaneous Registering Your Product To register your product
18. hicle It also requires that the cell phone is able to receive and transmit properly at the time this feature is used Incoming Calls 1 If you are not on a call the BlueConnect blue LED light will come on and the system will announce the incoming call verbally 2 Ifyou are on a call BlueConnect will announce the incoming call with a double beep Mute a Call 1 Press and release the VR button during the call and say Mute to turn the mute feature on This mutes the in car activity from the person on the other end of the call 2 Press and release it again and say Mute Off to turn the mute feature off Redial 1 Press and release the VR button and say Redial BlueConnect will redial the last number called on the cell phone Three Way Calling 1 This feature will not work unless your cell phone has three way calling capability 2 Make your first call Once connected press the VR button and say dial or call This places the first call on hold 3 Make the second call When connected press and hold the Phone button until you hear two beeps This joins the two calls You can switch between calls by pressing and holding the Phone button until you hear one beep 4 When a call you can connect a second incoming call by pressing and holding the Phone button until you hear two beeps Transfer a Call 1 Press and release the VR button during a call and say Transfer Call This transfers the call from Blu
19. ion prompts are on If it is it says Dialing and dials the number Using the Redial Feature 1 At the main menu say Redial gt BlueConnect says Dialing and calls the phone number that was dialed last on the phone Phonebook BlueConnect can store up to 32 names and 128 phone numbers Each name has 4 locations Home Work Mobile and Pager associated with it Adding a new name and phone number to your phonebook At the main menu say Phonebook BlueConnect prompts you 1 for a new entry edit list names delete or erase all or say cancel to return to the main menu Say New Entry Say the Name of the user to add BlueConnect responds with the a name it heard and checks to see if it is correct before proceeding 3 BlueConnect asks for a location to go with the name Say the location of the name Home Work Mobile or 4 Pager BlueConnect checks to see if it heard the location correctly 5 BlueConnect asks for the telephone number for the name Say the phone number for the name and location BlueConnect says the phone number and asks if it is correct If 6 so adds the phone number for this name and location to the phonebook and then asks Number stored Would you like to add another number for this entry Say Yes to add another number for this entry or say No if you are finished Adding a new location for a
20. ithout limitation any homeowner s or other insurance Whenever a claim is settled Autolntelligence shall be subrogated to any such rights of recovery the original purchaser may have from such other sources This warranty applies within the 50 fifty United States and the District of Columbia and Canada This warranty does not cover a defects or damage resulting from use of the Product in other than its normal and customary manner b defects or damage from misuse accident or neglect c defects or damage from improper testing operation maintenance installation alteration modification or adjustment d Product disassembled or repaired in such a manner as to adversely affect performance or prevent adequate inspection and testing to verify any warranty claim e Product which has had the serial number removed or made illegible f freight costs to the repair location General Provisions This is the sole warranty of Autolntelligence with respect to the Product lost data or other damages To the maximum extent permitted by law Autolntelligence hereby disclaims any and all implied warranties including without limitation implied warranties of merchantability and fitness for a particular purpose and implied warranties if any shall be limited in duration to the term of this warranty Some states do not allow limitations on how long implied warranties last so the foregoing limitation may not apply In no event shall Autolntelligenc
21. ling up the the vehicle while using BlueConnect windows turning the heater ac blower fan down and reducing any loud noises or talking while using BlueConnect Your BlueConnect unit may also pick up road noise Try to avoid using BlueConnect when traveling on extremely rough roads You are not speaking at the same time or before the Wait until the beep sounds before speaking BlueConnect beep is heard You are not speaking to slow too loud or too soft Try speaking in a normal voice when giving a command or response to BlueConnect It Will Not Call The Name Given To It CHECK POSSIBLE SOLUTIONS The name you called is stored in the BlueConnect Store the name in BlueConnect phonebook not in the phone book phone I Can t Select a Phone CHECK POSSIBLE SOLUTIONS Phone is paired to BlueConnect Pair the phone and LINK to BlueConnect Phone is turned ON Turn the phone ON Phone is LINKED to BlueConnect Say set up in main menu and then say Select Phone in order to select the desired paired phone to LINK Help Using the HELP feature to get BlueConnect to give you the available commands h Press and release the BlueConnect Phone button 2 After the beep say Help or during any timeBlueConnect is on press the VR button and say Help The module lists the available commands for the current menu For example say H
22. lueConnect module must be in a pairing mode at the same time BlueConnect will remain in a pairing mode for about 3 minutes before timing out Press and release the BlueConnect PHONE button and say Set Up For example say Set Up at the Main menu and BlueConnect prompts Select one of the following phone pairing confirmation prompts select 1 phone or say cancel to return to the main menu If there is no response to the prompts BlueConnect reminds you of the selection two more times until you select an option If there is no option selected after two repeats BlueConnect will power down 2 Say Phone Pairing After the system prompts you say Pair a Phone The system will remind 3 you that pairing should only be completed while the vehicle is in park When the vehicle is in park say Continue The system will then ask you for a 4 digit PIN This can be any number you 4 choose as long as you enter the same number on the phone later Say your four digit PIN For example One Two Three Four Follow your cell phone manufacturer s instructions for placing your cell 5 phone in a pairing mode 6 Select BlueConnect on the phone Then on the phone s numeric keypad enter the same PIN number as entered in step 4 7 BlueConnect will prompt you for a phone name Name it something easy to remember Say the phone name for example Jacob s phone To complete the pairing process BlueConnect
23. n existing name in your phonebook At the main menu say Phonebook Edit When prompted say the 1 name that you want to edit The system responds with Home Work Mobile or Pager Say the Location Home Work Mobile or Pager and the i phone number to enter in the phonebook for this name and location 3 BlueConnect verifies that it heard the location correctly and asks for the phone number for that location 4 Say a phone number like 6163998888 BlueConnect verifies that it heard the number correctly and stores 5 the number It will then say Number changed Would you like to call this number edit another entry or return to main menu 6 Say Call Edit or Return to Main Menu Phonebook Continued Editing a phone number for an existing name location 1 At the main menu say Phonebook Edit When prompted say the name and then the Location whose phone number you want to edit BlueConnect will tell you the current phone number 2 Say the new phone number like 6163998888 BlueConnect verifies that it heard the number correctly and stores 3 the number It will then say Number changed Would you like to call this number edit another entry or say cancel to return to main menu 4 Say Call Edit or Cancel to Return to Main Menu Listing names in BlueConnect phonebook Atthe main menu say Phonebook List Names
24. ny interference that may be received including interference that may cause undesired operation WARNING The transmitter has been tested and complies with FCC and IC rules Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the device The term IC before the certification registration number only signifies that Industry Canada technical specifications were met IC 279B UCONNCS JCI MODEL FCC ID CB2 UCONNCS 21 LIMITED WARRANTY Autolntelligence LLC Autolntelligence warrants its BlueConnect products Products against defects in material and workmanship under normal use and services for o A period of three years or 36 000 miles parts only if installed in your new vehicle at the time of the vehicle purchase by your selling dealer Or o A period of one year parts only if installed by an approved BlueConnect installer Or o A period of 90 days parts only Autolntelligence at its option will at no charge either repair exchange or replace the Product during the warranty period provided it is returned in accordance with the terms of this warranty All returned or replaced parts or Product shall become the property of Autolntelligence Any repairs or replacements covered by this warranty will be charged at the actual cost of the replacement parts plus the Autolntelligence hourly labor rate current at that time This express limited
25. onds with a verification to clear the selected phone If correct say yes say no to start the delete process over 6 When complete BlueConnect indicates the phone or phones have been Deleted List Paired Phones 1 Press and release the BlueConnect PHONE button and say Set Up BlueConnect will prompt you with available options 2 Say Phone Pairing 3 After BlueConnect prompts you say List Paired Phones 4 BlueConnect lists the names of the cellular phones that are currently paired with the BlueConnect module 5 BlueConnect asks if you want to start the list over again 6 Say Yes or No Confirmation Prompts Confirmation prompts confirm your commands with BlueConnect before they are carried out When the BlueConnect Confirmation Prompts feature in ON BlueConnect will repeat the last command received and ask whether the command received was correct before proceeding with the command execution Example with the confirmation prompts on and off PROMPTS ON OFF 1 You say Dial five five five one You say Dial five five five two one two one two one two BlueConnect dials the BlueConnect says Dialing five number as recognized For 2 five five one two one two is this example Dialing five five correct five and then dialing the number You say yes and BlueConnect 3 places the call You say no and BlueConnect asks you to repeat
26. phone user guide for pairing instructions and try to pair your phone again Use the Set Up command on your BlueConnect s main menu and then give the Select Phone command to link to the desired phone You are inside of your coverage area Most calls can t be made if you are outside of your coverage area Your BlueConnect unit uses the same coverage area as the paired cell phone Try making a call again when you are in your coverage area Check with your phone provider if you are unsure about your coverage area Mobile account is still active and has not been Contact your cell phone service provider cancelled 15 Troubleshooting Can Hear But They Can t Hear Me CHECK POSSIBLE SOLUTIONS The phone s signal strength Avoid using your phone and BlueConnect in areas where the signal strength is poor and unable to provide a good conversation in both directions Call is not muted on the BlueConnect unit Turn mute off on BlueConnect by saying mute off while in use The Audio Goes Mute Both Ways During a Call CHECK POSSIBLE SOLUTIONS You have not accidentally muted BlueConnect Press the PHONE button to return to the call The Audio Quality is Poor CHECK POSSIBLE SOLUTIONS The audio quality of your cell phone while not using it with BlueConnect If the audio quality is good then try it again with Blue
27. ructions and the BlueConnect pairing instructions Try the pairing process again On certain phone models you need to tell the phone Try pairing again and tell the phone to connect to connect after initiating the pairing process on some models only Bluetooth option on your phone was turned ON Turn the Bluetooth option to ON on your phone Phone is not outside of the vehicle while trying to pair Place phone inside the vehicle in the front seat area during the it to BlueConnect pairing process Phones that require a SIM card Make sure that it is installed If not install a SIM card 4 digit PIN number entered in the phone matches the Reprogram using the same four digit PIN for both PIN requests BlueConnect PIN number Troubleshooting A Paired Phone Will Not Link Connect CHECK POSSIBLE SOLUTIONS Phone and BlueConnect have power Make sure that the phone and vehicle ignition is ON Also make sure that your phone battery is charged Phone and BlueConnect have had adequate time to Allow at least 60 seconds for the link to take place find each other BlueConnect was not barred from the phone Use the BlueConnect Set Up command at the main menu and then Select Phone command to link to the desired phone Phone is set to automatically link connect to the See your phone s user guide for Bluetooth settings BlueConnect BlueConn
28. t of 5 the current ignition on cycle BlueConnect temporarily overrides the phone priorities for the rest of the current ignition on cycle BR Select phone by number At the main menu say Set Up The system prompts you with available options 2 Say Select Phone 3 The system lists the available phones and asks for the number of the phone Say the number of the phone BlueConnect verifies the selected phone name and asks if it is correct Say Yes if correct or No if not BlueConnect sets this phone to the highest priority for the rest of the 5 current ignition on cycle This temporarily overrides the phone for rest of current ignition on cycle only 4 11 Using the Call Feature Calling a name or a name location from the phonebook At the main menu say Call any phone book entry name If the 1 name has more than one location BlueConnect will ask for the location to call 2 If just call was used BlueConnect will say Name Please Say the Name 3 Say the Location Using the Dial Feature Dialing a phone number that is not in the phonebook At the main menu say Dial immediately followed by the phone 1 number such as 6163948888 or just say dial then speak the phone number when prompted BlueConnect says what number it is dialing and verifies that this is 2 correct if confirmat
29. ted or when there is an incoming call It also comes on when you are on a call VR Voice Recognition Button or Barge in Button Push to input a command without having to listen for a prompt Push to transfer a call This allows you to transfer your call back to your cell phone in the event you want privacy or are exiting the vehicle Push to mute the phone Push to send DTMF tones Directional Microphone Function Overview COMMAND 1 COMMAND 2 COMMAND 3 Call lt Name gt lt Location gt CALL ee lt Location gt Dial lt Number gt DIAL lt Number gt PHONEBOOK NEW ENTRY lt Name gt lt Location gt lt Number gt EDIT lt Name gt lt Location gt lt Number gt LIST NAMES Call lt Location gt Edit lt Location gt lt Number gt Delete lt Location gt Previous Continue DELETE lt Name gt lt Location gt lt ALL gt ERASE ALL REDIAL EMERGENCY SET UP PHONE PAIRING HELP Pair a Phone Delete a Phone List Paired Phones CONFIRMATION PROMPTS SELECT PHONE lt Phone ID Number gt Phone Pairing You must first pair BlueConnect establish a communication link to your Bluetooth hands free profile cell phone Please refer to your cell phone s operation manual for instructions on how to place your cellular phone into a pairing mode before starting the pairing process In order to complete successful pairing both your cell phone and the B
30. warranty is extended by Autolntelligence to the original end user purchaser only and is not assignable or transferable to any other party The original purchaser must complete and return the enclosed product registration warranty card All claims for damaged Products must be made within 15 fifteen days from the date of the damage and be accompanied by a copy of the original sales receipt for the damaged Product This is the complete warranty for Products manufactured by Autolntelligence Autolntelligence does not warrant the installation maintenance or service of the Product All costs of shipping the Product to Autolntelligence for inspection and all risk of loss during transit shall be borne solely by the original purchaser Autolntelligence reserves the right to negotiate the cost of repairs If Autolntelligence determines at its sole discretion that it is impractical to ship the damaged Product to Autolntelligence Autolntelligence may designate at its sole discretion an equipment repair facility to inspect and estimate the cost to repair such Product The cost if any of shipping the connected equipment to and from any such repair facility and of such estimate shall be borne solely by the original purchaser Damaged Product must remain available for inspection until the claim is finally settled This warranty is in excess of and applies only to the extend necessary beyond any coverage for the Product provided by other sources including w
Download Pdf Manuals
Related Search