User manual Zitzi Pengy Buggy
Contents
1. s required that the faulty product is returned for us to process a warranty claim Always attach the packing slip of the original delivery Warranty claims Describe the error and the possible cause for this as thoroughly as possible Claim repairs or possible replacement under warranty Always attach a copy of the invoice and state that the product should be returned to you after repairs Provide a shipping address a contact person and a phone number Make sure that you pack the product well to protect it from shocks during the transportion Note the shipping number in your documentation This is so that you can track the shipment should anything occur during transport Returning products n the event of faulty orders or deliveries the products should be returned within 20 days from delivery Always attach a copy of both the packing slip and the invoice Provide your reason for returning the products Make sure that you pack the product well to protect it from shocks during the transportion Note the shipping number in your documentation This is so that you can track the shipment should anything occur during transport For products returned more than 20 days from delivery a refund is made of 80 of the invoice value For products returned more than 60 days from delivery a refund is made of 60 of the invoice value For products returned more than 150 days from delivery a refund is made of 40 of the invoice value For pr2. Anatomic SITT AB 14 User manual Zitzi Pengy Buggy Anatomic SITT AB Reconditioning Introduction Regular maintenance is important for the Pengy to function safe and properly The need for service changes and is dependending on use and wear Check all moving parts and fasteners regularly Use original parts from Anatomic SITT AB when reconditioning the Pengy Work should always be done by professional and qualified staff If you need support you are always welcome to contact Anatomic SITT AB The need of reconditioning varies and must be judged case by case Go through all checkpoints at least once per year or as needed Functional control should be performed each time the Guppy is used Cleaning Painted surfaces wheels front castors and handles is cleaned with cleaning solvent Never use paint thinner gasoline or other solvent Finishing After washing all leads confined space and drainage holes should be blown dry and spray lubricated with thin oil Marking Check that the CE marking is intact and readable The marking is located at the back of the frame Wheels Make sure both castors and rear wheels are not worn and that they spin easily without noise Paint To prevent corrosion and touch up scratches check for damages in the paint If needed touch up paint is available from Anatomic SITT AB 15 User manual Zitzi Pengy Buggy Anatomic SITT AB Stability Check that all the wheels are firml
3. Tip The Pengy seat can be mounted backwards and forwards LY g in SR e N Ze E H k Gn fy LE User manual Zitzi Pengy Buggy Anatomic SITT A Mounting the Delfi Pro Fixed mounting on adapter system Mount the Delfi Pro on the adapter plate Mount the included screws as the picture shows Slide the bottom profile on to the rail pins and adjust til desired position lock the screws A The seating system is easily and securly mounted on the buggy with the adapter plate Place the plastic fasteners D in its tracks and make sure that the locking pin is activated Anatomic Seat bracket and other adapter systems The tracks E is intended for mounting of adapter systems and Anatomic Sits To loosen the adapter system turn the locking pin B a quarter turn Obs The pin shall always be in a locked position when the seat is in use Locking pin B moOoOe e Included screws User manual Zitzi Pengy Buggy Anatomic SITT A Mounting of Carseat Pro Mounting the Carseat Pro on the Pengy buggy Mount the adapter plate on the buggy Lock with the locking pin A Then in sert the Carseat Pro in the adapter plate Press down Carseat Pro at the front so that the locking pin B clicks Lock the back in the rear bracket with the sup plied strap Unmount the Carseat Pro To unmount Carseat Pro from the adapter plate loosen the locking pin B by pulling it ou
4. 710260 DE ZOLA LO 60Z1L0248 User manual Litzi Pengy Buggy Table of contents Safety Drecautions 3 DU geg Ee EE 5 Field Of application tiiecticetis og A andre wees 3 Correspondence cece ee cece cece cee eeeeeeeee seen en eneaeaes 3 ele DEE 3 Raising and rolding A RIIIE EE eine T 4 POIGING DEE 4 Braks acena E 5 Direction lock l l 5 Lock and unlock the front wheel direction 5 NEE 6 Driving DOW erinit inada a ARE 6 Mounting the Pengy seat 7 Mounting the Pengy seat 7 Unmount the Pengy seat 7 Mounting the Delfi Pro 000000000eaaee 8 Fixed mounting on adapter swvsterm 8 Anatomic Seat bracket and other adapter SYSTEMS cece eect ete an eee nent EEEO teen nent enna eee 8 Mounting the Carseat Pro 9 Mounting the Carseat Dro 9 UAMOUNE the Carseat Prowicc cavssecegesacvoccacces 9 Lt e iora 10 Changing to 12 kit front 10 Releasing bewbeels cccececees eee eeeeeees 10 Footrest aare 11 MOUNTING the FOOEKESE sess ceccdwdiasectgownstsacemeers 11 ele Ee WEE e EE 1 Heid ht adj UStmMent eo iex sa ege gge gue eBEShE ei AEN 1 Turn up 11 Transportation kt 12 Transportation in a vehicle 13 Maintenance instructions 13 Service interval 0 ce cececceseeeseesesceeesuenes 13 Cleaning and washing Ipstruchions 13 Reconditoning 14 ee Ee EE 4 Ee let ME 4 FIMSHING WE 4 AMKING EE 4 KE 4 EE Me EE 4 Sta Oli edit
5. G Ringstrasse 15 CH 4123 Allschwill Tel 41 614 879 911 Fax 41 614 879 910 Stod Hf Stoaekjadmidin Tronuhraun 8 IS 220 Hafnarfjordur Tel 354 565 2885 Fax 354 565 1423 Scan Ideal 28 Tzavela Str GR 542 49 Thessaloniki Tel 302 310 320 150 Fax 302 310 350 151 Team Nova Reha Gerecja vas 33 SVN 2288 Hajdina Tel 386 278 201 O06 Fax 386 278 201 06 Via Libre Fundosa Accesibilidad Don Ramon de la Cruz 38 ES 28001 MADRID Tel 34 911 213 031 Fax 34 911 213 025 Asia Oceania Middle East Al Safwa Mobility LLC ASM Al Falah Street Harley Davidson 2001 Abu Dhabi Tel 971 264 242 62 Fax 971 264 242 63 Email info alsafwamobility ae Cubro Rehab New Zealand PO Box 9144 Tauranga Tel 64 757 78 816 Fax 64 757 78 827 Motum 3 224 Cambridge Street Wembley WA 6014 Tel 08 9381 2087 Paediatric Mobility Equipment Po Box 1118 Young AUS NSW259 Tel 61 1300 131 884 Fax 61 1300 884 010 Email sales paedmobility com au Special needs for Special children 48 Mordey Hagetaot St Beer Sheva ISR 84840 Tel 972 8 62 875 85 Fax 972 862 819 61 The Gym amp Care 1F 23 amp 24 IOI Business Park MYS 47100 Puchong Tel 603 8070 9166 Fax 603 8073 9166 Email info gymncare com Anatomic SITT AB Summary and follow ups Follow up inspections Continuously perform the follow ups specified in each point You should check the following points every time patient to use the product e Con
6. Zeen ee e ebe gebiet 5 Tubular frame and details 5 FORKS x6 ege aE E E EE edad 5 DIVING DOW EE 5 Ee 5 Folding mechanism and nit 5 Sift giele Geer EE 5 Customer service 16 Summary and follow ups 17 FOIIOW UP Imspechions eee ee ec ee ee cence ees 17 Adaptation and customization 17 Guidelines and recommendations 17 Terms of sale l a 18 KEE 18 Warranty Claims ooo eccceecccececeeeeeeeseueeeeenes 18 Returning Drochucts sisisriai raien eigni smsi 18 Technical data ee 19 Safety precautions Introduction For you to use all advandtages of the Zitzi Pengy it is important that you read through this manual thoroughly This applies to all persons who are in the vicinity of the user The product is designed for users with seating problems and fits many different types of diagnoses Adjustment of the Zitzi Pengy should always be performed by medically qualified person If you need additional information please contact Anatomic SITT AB Field of application The product is intended for use as a chassi together with the seating systems produced by Anatomic SITT AB If the desire for another use can be found please contact Anatomic SITT AB Correspondence Zitzi Pengy and its accessories are CE marked products A unique serial number is located on a label placed under the activation housing This serial number should be quoted in any correspondence regarding the product Crash tested Crash te
7. kkala Tel 358 331 222 700 Fax 358 331 222 710 Email handico handico fi ss Europe Anatomic SITT Nederland BV Postbus 6027 4000 HA TIEL Tel 31 344 63 45 40 Fax 31 344 62 33 61 Email informatie anatomicsitt com Be Independent Ltd St Luke s Road G Mangia PTA MLT 1027 Tel 356 214 662 66 Fax 356 214 656 70 Consolor Ltd Unit A3 The Forelle Centre Black Moor Road Ebblake Industrial Estate Verwood Dorset BH31 6BB Tel 44 120 282 76 50 Fax 44 133 273 02 33 Ss HandiTech Scandinavian Reha Aids Center 1G Seferi Str GR 542 50 Thessaloniki Tel 302 310 324 114 Fax 302 310 324 054 Email info handitech gr Able Tools Greece 49K Strovolou Avenue Strovols Nicosia 2048 Cyprus Tel 357 22 250 115 Able Tools Cyprus 49K Strovolou Avenue Strovols Nicosia 2048 Cyprus Tel 357 22 250 115 Fax 357 22 250 116 Invaru Ltd Peterburi tee 14A EST 114 11 Tallin Tel 372 621 25 82 Fax 372 638 08 78 MMS Medical Ltd 51 Eastgate Drive Little Island Cork Tel 353 021 461 8000 Fax 353 021 461 8099 Sg Ss User manual Zitzi Pengy Buggy 060000068 Ss S zs 5 Mobilitec Rua dos Verdes 123 PRT 4470 658 Pedras Tel 351 229 436 130 Fax 351 229 436 139 OX Orthop dix 27 rue Francois Gillet FR 42400 St Chamond Tel 33 477 195 994 Fax 33 426 303 789 Creha Distribuzione Via C Battisti 7 A 22036 Erba CO Tel 39 314 44 76 744 Fax 39 316 47 04 62 Rehatec A
8. n lock Lock and unlock the front wheel direction Turn the direction lock to the left to lock the front wheel direction You hear a click when the wheels lock Turn the direction lock to the right to unlock Direction lock User manual Zitzi Pengy Buggy Anatomic SITT AB Tilt To tilt the buggy loosen the locking pin A located on the right side Lift the red activation lever B located on the left side tilt to desired position The tilt locks automatically Lock the locking pin A Obs The locking pin A shall always be locked when the buggy is in use Locking pin A Driving bow Angle adjustment To adjust the angle of the driving bow press both knobs A located at the inside of the driving bow simultaneously Adjust to desired position The quick hitchs locks automatically User manual Zitzi Pengy Buggy Anatomic SITT AB Mounting of the Pengy seat Mounting the Pengy seat Hold the Pengy seat in the armrests and place it downwards in the tracks as the picture shows Make sure that the locking pin locks when the Pengy seat comes to its lowest position of the bracket Unmount the Pengy seat To unmount the Pengy seat loosen the locking pin A by pulling it and turning it a quarter turn When the locking pin is loosened hold the seat in the armrests and lift the chair upwards Obs The pin shall always be in a locked position when the seat is in use
9. oducts returned more than 360 days from delivery no refund is made for the products A Customized products cannot be returned 19 Technical data A Measurements A 95 106 cm B 54 cm E 86 cm D 74 100 cm User manual Zitzi Pengy Buggy o joo B Se Measurements A 87 cm B 39 cm A a gt B gt C D gt Measurements A 66 cm B 39 cm C 42 cm D 55 Em Anatomic SITT AB 20 SE DK NO NL etd soroa C L Anatomic User manual Zitzi Pengy Buggy Anatomic SITT AB manufacturer Box 6137 SE 600 O6 Norrk ping Sweden Tel 46 1116 18 OO Fax 46 1116 20 05 Support 46 1116 18 O5 Street address Terminalgatan 1 SE 602 29 Norrk ping Sweden Anatomic SITT A S Viengevej 4 8240 Risskov Denmark Tel 45 86 17 01 74 Fax 45 86 17 0175 Bardum AS Handverksveien 8 1405 Langhus Norge Tel 47 64 91 80 60 Fax 47 64 91 80 66 Anatomic SITT Nederland BV Postbus 6027 4000 HA Tiel Netherlands Tel 31 344 63 45 40 Fax 31 344 62 33 61 anatomicsitt com info anatomicsitt com facebook com anatomicsitt youtube com anatomicsitt a SITT Anatomic SITT AB
10. ootrest take the front E of the footplate and then lift up CS Ze fp LA LSA j e ES User manual Zitzi Pengy Buggy Anatomic SITT AB 12 Transportation kit Mount the transportation kit as the picture shows User manual Zitzi Pengy Buggy Anatomic SITT A B Transportation in a vehicle Guidelines for transportation in a car Fixing shall be done with straps approved to ISO 10542 d Note It is important that you only stretch the strap to low tension Over tensing of the straps can cause the frame to become warped Crash tested and approved Pengy is crash tested and approved according to ISO 7176 19 for 43 kg Note Crash test approved for load weights up to 43 kg Maintenance instructions Service interval In order for the device to work properly regular service and inspection must be performed The need for service depends on frequency of use and wear Check all moving parts and fasteners for wear Service should always be performed by professional and qualified personnel If you are unsure please feel free to contact Anatomic SITT AB Cleaning and washing instructions Plastic and metal parts can be wiped off with a damp cloth or washed with antibacterial liquid or similar Think green think about the environment Use biodegradable detergents Check the condition regularly and perform maintenance when necessary 13 User manual Zitzi Pengy Buggy
11. sted and approved according to ISO 7176 19 This product is manufactured by Anatomic SITT AB Postal address Anatomic SITT AB Box 6137 600 O6 Norrk ping Street address Anatomic SITT AB Terminalgatan 1 602 29 Norrk ping Telephone 4611 161800 Fax 4611 162005 E mail info anatomicsitt com Web anatomicsitt com youtube com anatomicsitt Check the checkbox if the product is CUSTOMIZED The CE Mark is no longer valid and should be removed User manual Zitzi Pengy Buggy Anatomic SITT AB Raising and folding Raising The buggy can easily be raised and folded Pull both locks A upwards the way that the arrows show Then lift the driving bow so that the buggy rises You hear a click when the buggy is in full upright position Obs Be careful to avoid risk of pinching Folding To fold the buggy pull locks A upwards the way that the arrows show Fold the driving bow downwards to the end position You hear a click when the buggy locks in the folded position Locks A Ze oe Locks A User manual Zitzi Pengy Buggy Anatomic SITT AB Brakes The wheels are equipped with parking brakes that can be activated by the care taker To lock the wheels press the brake pedal A To loosen the brakes place the foot at the top of the brake pedal and move it forwards Obs Always lock the wheels if the buggy is left on uneven surfaces Brake pedal A Directio
12. t Carseat Pro is now loose and can be lifted off To remove Carseat Pro with adapter plate loosen the locking pin A Carseat Pro and the adapter plate is now loose and can be lifted straight up Obs The pin shall always be in a locked position when the seat is in use User manual Zitzi Pengy Buggy Anatomic SITT AB Wheels Changing to 12 kit front Press the sprint A to loosen the wheels Insert the 12 kit in the two holes Make sure that the wheels lock by pressing the wheel arches downwards Releasing the wheels To release the front wheel push the pin A then pull the wheel downwards To release the back wheel push the pin B then pull the wheels to the side Important Make sure that the wheels are securly fastened when returning them to the buggy 10 User manual Zitzi Pengy Buggy Anatomic SITT AB Footrest Mounting of the footrest Mount the footrest by inserting the footrest stay in the holes A Lock with the finger knob B located under the pipes Tips The footrest can be mounted both backwards and forwards Angle adjustement To adjust the angle press the button C located on the left side of the knee joint When releasing the button the angle locks automatically Height adjustement To adjust the height loosen the knob D located behind the footplate adjust to desired position Lock the height by tightening the knob Turn up To fold up the f
13. tinue to regularly perform the follow ups which is described in respective point e Regularly examine that all the screws are securely locked e Regularly examine the wear of straps and cushions e Check the settings on accessories so that the user has the correct seating position Adaptation and customization Guidelines and recommendations Every time the Pengy is altered in some way an assessment has to be made to determine if it is an adaptation or a customization An adaptation is any change made in comprehension of the CE mark All other changes are customizations Adaptations must only be made by a person deemed to be qualified for the task and should always be made in a professional manner The CE mark means that the product fulfils all of the essential European safety requirements Note that a risk assessment always should be done for an adaptation as well as for a customization of a medical aid The product must never become dangerous to use after adaptation The product should be fitted with a note that it is adapted to a specific user so that it cannot be mistaken for a standard model product 17 User manual Zitzi Pengy Buggy Anatomic SITT AB 18 User manual Zitzi Pengy Buggy Anatomic SITT AB Terms of sale Warranty Warranty against manufacturing errors is valid for one 1 year from delivery date Warranty is void if the product has been subjected to external factors or rough handling It
14. y on the ground and that there is no skewness in the chassis Tubular frame and details Welded and bolted joints Grind bushings and hinges to operate without noise Lubricate as required Also check the knobs screws and other mounting parts Replace them if necessary Forks Ensure that the fixings and bearings no play and they turn easily Lubricate the front forks when needed Driving bow Make sure the padding and handles are secure and that the driving bow is adjustable in height Brakes Check that the parking brake is working properly Folding mechanism and tilt Make sure that you can easily fold up the buggy and that you can easily tilt the unit Make sure that it locks in the up and down position Function control Function control means that you go through wheels stability brakes and driv ing bow Suspension Check suspension Lubricate as required Notice Always check that the device is not customized when reconditioning before it is sent to new users Customer service Scandinavia Anatomic SITT AB Box 6137 SE 600 06 Norrk ping Terminalgatan 1 SE 602 29 Norrk ping Tel 46 11 161800 Fax 46 11162005 Email info anatomicsitt com Anatomic SITT A S Viengevej 4 DK 8240 Risskov Tel 45 861 701 74 Fax 45 861 701 75 Email a sitt anatomic sitt dk Bardum AS Handverksveien 8 1405 Langhus Norge Tel 47 64 91 80 60 Fax 47 64 91 80 66 Handico Finland OY Turkkirata 28 33960 Pir
Download Pdf Manuals
Related Search