Automatic Blow Clear System 4.1
Contents
1. Number of blow clearing Time slice 750 mm 600 mm 200 mm standard 6 times a day freely adjustable Copyright 2009 Hacker amp Petermann GmbH Bluefly Alle Rechte vorbehalten Hacker amp Petermann GmbH beh lt sich das Recht vor angebotene Eigenschaften ohne Vorank ndigung zu ndern oder einzustellen Setting the Blow Clearing Intervals amp Programming Bluefly Blow Clear Systems are delivered factory adjusted to meet the customer s requirements Only the time setting for the blow clearing has to be changed if necessary If you want to set the blow clearing times you need the Logo Soft 5 software and a data cable In the supplied control program you only are allowed to set the two timers on the upper left side Double click on the timer and change the Nocken 1 3 your blow clearing times analog to the old one That means from 07 00 and 07 01 you can make 14 30 and 14 31 The one minute delay is only for the program All changes in software have to be made by professional personal Consequential damages are excluded from any possible warranty or liability claim For any further information please contact us on the telephone numbers given before Copyright 2009 Hacker amp Petermann GmbH Bluefly Alle Rechte vorbehalten Hacker amp Petermann GmbH beh lt sich das Recht vor angebotene Eigenschaften ohne Vorank ndigung zu ndern oder einzustellen2. f Freiblaseinrichtungen Automatic Blow Clear System 4 1 4 4 Heavy Duty protected Version 2009 V1 Hacker amp Petermann GmbH Sonnengasse 13 A 9020 Klagenfurt Tel 43 0 463264527 Fax 43 0 463 913706 Mobil 43 0 676 845435 DW 100 200 E Mail office hacker petermann at www hacker petermann at UID ATU 57917927 Copyright 2008 Hacker amp Petermann Ltd Bluefly Freiblaseinrichtung All rights reserved Hacker amp Petermann Ltd reserve the right to change or to withdraw features offered without advance notice Hacker Petermann Ltd Sonnengasse 13 A 9020 Klagenfurt Austria Carinthia Thank you for your purchase and for placing your trust in our Bluefly Blow Clear Equipment For economic and technological reasons modern day fire prevention often involves using smoke in take systems to detect fire Unfortunately these generally very good systems come with a costly disadvantage Because air is sucked in through the pipe system inlets fine dust is sucked in too After a period of some months depending on the environment this fine dust clogs the inlets Besides leading to a breakdown in the smoke in take system this could even result in a fire being detected too late or not at all It is because of breakdowns in the smoke in take system that pipe system maintenance and cleaning usually come at such a high cost With our BLUFLY Blow Clear System Serie 4 Heavy Duty you can say goodbye to maintenance and
3. Standard compressed air quick coupling max 10 bar Internal pressure reducer for adjusting des working pressure depending on lenght of sensor pipe max 8bar Minimum needed pressured air supply 4 5 bar Sensor Suction pipe 25mm PVC couplings for bonding Reset contact 1A B Closes for a second every time before and or after or during blow clearing takes place This is so that provided it is compatible with the air intake system the error message low air flow is suppressed during blow clearing or for cleaning is deactivated Input contact 1a Input contact for unscheduled blow clearing by means of a SIS signal or manually Input contact 2 Input contact to suppress blow clearing if fire alert is detected by SIS Output contact Output contact for error messages to SIS Protection class IP65 with a transparent control element cover Temperature range 5 bis 45 Grad Celsius Suitable for use only inside buildings with standard environmental conditions No acidic ambient air Dimensions Width 750 mm Height 600 mm Breadth 200 mm Timer control Number of blow clearing standard 6 times a day Time slice freely adjustable Optional Case of stainless steel Internal adjustable cabinet heating Pressure controll External filter for sensor pipe Copyright 2008 Hacker amp Petermann Ltd Bluefly Freiblaseinrichtung All rights reserved Hacker amp Petermann Ltd reserve the right to change or to w
4. cleaning costs and to increased risks also under extreme conditions Once installed Blow Clear uses compressed air to clean the pipe system fully automatically and at intervals of your choosing The comparatively low purchase price will be repaid in no time because of the savings you make on the costs of breakdowns If you are interested or you have got questions or improvement suggestions or queries please contact us in person or on the telephone numbers given above We will be pleased to give you advice We are available at any time on the following mobile number 43 0 676 845435 ext 100 200 Copyright 2008 Hacker amp Petermann Ltd Bluefly Freiblaseinrichtung All rights reserved Hacker amp Petermann Ltd reserve the right to change or to withdraw features offered without advance notice Automatic Blow Clear System Serie 4 HD 1 Sensor Pipe System Technical Data Electrical connection 230V AC 1 5mm Option PLC 24 V Valve power 230V Comressed air connect Standard compressed air quick coupling max 10 bar Internal pressure reducer for adjusting des working pressure depending on lenght of sensor pipe max 8bar Minimum needed pressured air supply 4 5 bar Sensor Suction pipe 25mm PVC couplings for bonding Reset contact 1A B Closes for a second every time before and or after or during blow clearing takes place This is so that provided it is compatible with the air intake system the error message l
5. cabinet heating Pressure controll External filter for sensor pipe Copyright 2008 Hacker amp Petermann Ltd Bluefly Freiblaseinrichtung All rights reserved Hacker amp Petermann Ltd reserve the right to change or to withdraw features offered without advance notice Technical User Manual for Blow Clear Equipment For all technical questions ask your reseller or Mr Markus Petermann from Hacker amp Petermann GmbH support on phone number 0043 0 676 845435 200 Installation The Blow Clear system must be installed between your smoke in take system and the pipe network More specifically the Blow Clear apparatus should be installed immediately behind the smoke in take system We suggest to install possible filter etc between our automatic Blow Clear System and the sensor pipe Ask your filter supplier for more information of insensitivity of filter against pressured air If you are interested in tested filters made for blow clear systems we can provide you these We recommend to fix our system firmly onto the wall using dowels and screws You should use the prepared four holes Especially by the IP 65 model we advise the usage of screws with sealings The Blow Clear System should be connected with the standard plastic pipes of your smoke in take system Please open the plastic screwing 1 of the lower suction pipe and on the upper sensor pipe and push the plastic pipes of your SIS through the provided holes 2 Tha
6. e technical equipment against lower temperatures etc a pre assembled equipment cabinet heating is available It can be readily integrated into the Blow Clear System e Pressure control In case off too less pressured air it produce a signal Technical data AFE Serie 4 HD Blow Clear System Electrical connection Comressed air connect Compressed air valve Steering valve Pressure controlled valve Sensor Suction pipe Protection class Temperature range 230V AC 1 5mm Option PLC 24 V Valve power 230V Standard compressed air quick coupling max 10 bar oil free pressured air We advise oil free air in order to keep the sensor pipes clean Modern compressors can supply relative oil free air If you use several Blow Clear Systems we advise to set different times for blow clearing in order to minimize the max needed amount of pressured air Internal pressure reducer for adjusting des working pressure depending on lenght of sensor pipe max 8bar Minimum needed pressured air supply 4 5 bar 1 4 NC 230 V AC 1 8 NC 230 V AC with automatic vent 1 NO pneumatic angle seat valve for best CV factor 25mm PVC couplings for bonding 10cm distance pipe to pipe IP65 with a transparent control element cover 5 bis 45 Grad Celsius Suitable for use only inside buildings with standard environmental conditions No acidic ambient air Dimensions 4 1 4 4 Width Height Breadth Timer control
7. einrichtung All rights reserved Hacker amp Petermann Ltd reserve the right to change or to withdraw features offered without advance notice Adjust the internal pressure reducer In order to save you further costs our new automatic blow clear system has a serial pressure reducer with a manometer 6 This one allows you to reduce the standard pressure of your pressured air supply with about 8 10 bar to the optimal working pressure We advise to begin with a pressure of approximately 2 bar and to increase pressure depending on sensor pipe length Maximal pressure should be 8 bar because you loose warranty of valves with higher pressures Attention Our new automatic blow clear system Serie 4 contain 4 pressure valves which allows a higher air flow with the same working pressure So the pressure and the airflow has to be adjusted with the pressure reducer Copyright 2008 Hacker amp Petermann Ltd Bluefly Freiblaseinrichtung All rights reserved Hacker amp Petermann Ltd reserve the right to change or to withdraw features offered without advance notice Included e Protection class IP65 with folding upwards control element cover for better protection against water dust and contact to electrical parts e Internal pressure reducer with manometer This one allows you to reduce the standard pressure of your pressured air supply with about 8 10 bar to the optimal working pressure We advise to begin with a pressure of approximat
8. ely 2 bar and to increase pressure depending on sensor pipe length Maximal pressure should be 8 bar because you loose warranty of valves with higher pressures Attention Our new automatic blow clear system Serie 4 contain 4 pressure valves which allows a higher air flow with the same working pressure So the pressure and the airflow has to be adjusted with the pressure reducer e Input contact for unscheduled blow clearing by means of an SIS signal or manually by installed button Here an input contact I1 is installed which activates the blow clearing in case the signal e g of the smoke intake system is not available e g error message line blocked e Input contact for suppressing a blow clearing if a fire alert is detected by SIS while clearing should happen by schedule e Output contact for error message Here an output contact O1 amp 2 NO switch is installed that can for instance depending on the programming signal that after unscheduled blow clearing the SIS input signal e g error message line blocked is still not activated Copyright 2008 Hacker amp Petermann Ltd Bluefly Freiblaseinrichtung All rights reserved Hacker amp Petermann Ltd reserve the right to change or to withdraw features offered without advance notice Optional e Case made of stainless Steel for bad environmental conditions recommended by law or just for a better design e Equipment cabinet heating To protect th
9. ithdraw features offered without advance notice Automatic Blow Clear System Serie 4 HD 4 Sensor Pipe System Technical Data Electrical connection 230V AC 1 5mm Option PLC 24 V Valve power 230V Comressed air connect Standard compressed air quick coupling max 10 bar Internal pressure reducer for adjusting des working pressure depending on lenght of sensor pipe max 8bar Minimum needed pressured air supply 4 5 bar Sensor Suction pipe 25mm PVC couplings for bonding Reset contact 1A B Closes for a second every time before and or after or during blow clearing takes place This is so that provided it is compatible with the air intake system the error message low air flow is suppressed during blow clearing or for cleaning is deactivated Input contact 1a Input contact for unscheduled blow clearing by means of a SIS signal or manually Input contact 2 Input contact to suppress blow clearing if fire alert is detected by SIS Output contact Output contact for error messages to SIS Protection class IP65 with a transparent control element cover Temperature range 5 bis 45 Grad Celsius Suitable for use only inside buildings with standard environmental conditions No acidic ambient air Dimensions Width 750 mm Height 600 mm Breadth 200 mm Timer control Number of blow clearing standard 6 times a day Time slice freely adjustable Optional Case of stainless steel Internal adjustable
10. m PVC couplings for bonding Reset contact 1A B Closes for a second every time before and or after or during blow clearing takes place This is so that provided it is compatible with the air intake system the error message low air flow is suppressed during blow clearing or for cleaning is deactivated Input contact 1a Input contact for unscheduled blow clearing by means of a SIS signal or manually Input contact 2 Input contact to suppress blow clearing if fire alert is detected by SIS Output contact Output contact for error messages to SIS Protection class IP65 with a transparent control element cover Temperature range 5 bis 45 Grad Celsius Suitable for use only inside buildings with standard environmental conditions No acidic ambient air Dimensions Width 750 mm Height 600 mm Breadth 200 mm Timer control Number of blow clearing standard 6 times a day Time slice freely adjustable Optional Case of stainless steel Internal adjustable cabinet heating Pressure controll External filter for sensor pipe Copyright 2008 Hacker amp Petermann Ltd Bluefly Freiblaseinrichtung All rights reserved Hacker amp Petermann Ltd reserve the right to change or to withdraw features offered without advance notice Automatic Blow Clear System Serie 4 HD 3 Sensor Pipe System Technical Data Electrical connection 230V AC 1 5mm Option PLC 24 V Valve power 230V Comressed air connect
11. n glue the pipes sealed with your standard adhesive into the pipe coupling 3 By screwing down the plastic screws 1 after the adhesive is cured the case will be sealed The distance between pipes is 10cm from middle pipe to middle pipe The compressed air quick release coupling 4 must be connected with oil free compressed air of between 4 5 and max 10 bar Make sure that the compressed air supply is sufficient Copyright 2008 Hacker amp Petermann Ltd Bluefly Freiblaseinrichtung All rights reserved Hacker amp Petermann Ltd reserve the right to change or to withdraw features offered without advance notice Electrical connections As the cable entry 5 is situated at the bottom the system can be connected to the mains supply as well as to the smoke intake system if necessary The Blow Clear System operates on an alternating current of 230 volts Connect up to the terminals as follows Live black Neutral blue Protective Earth green yellow The in and output contacts will be connected depending on programming Further information you can find in the circuit diagrams Additional installation guide for 24Volt PLC In contrast to the 230 VAC PLC Variant the PLC is connected with 24 V at the 24 V clips See picture In this way all inputs can be used with 24V technic The connection to 230 V AC is still necessary for power supply of valves Copyright 2008 Hacker amp Petermann Ltd Bluefly Freiblas
12. ow air flow is suppressed during blow clearing or for cleaning is deactivated Input contact 1a Input contact for unscheduled blow clearing by means of a SIS signal or manually Input contact 2 Input contact to suppress blow clearing if fire alert is detected by SIS Output contact Output contact for error messages to SIS Protection class IP65 with a transparent control element cover Temperature range 5 bis 45 Grad Celsius Suitable for use only inside buildings with standard environmental conditions No acidic ambient air Dimensions Width 750 mm Height 600 mm Breadth 200 mm Timer control Number of blow clearing standard 6 times a day Time slice freely adjustable Optional Case of stainless steel Internal adjustable cabinet heating Pressure controll External filter for sensor pipe Copyright 2008 Hacker amp Petermann Ltd Bluefly Freiblaseinrichtung All rights reserved Hacker amp Petermann Ltd reserve the right to change or to withdraw features offered without advance notice Automatic Blow Clear System Serie 4 HD 2 Sensor Pipe System Technical Data Electrical connection 230V AC 1 5mm Option PLC 24 V Valve power 230V Comressed air connect Standard compressed air quick coupling max 10 bar Internal pressure reducer for adjusting des working pressure depending on lenght of sensor pipe max 8bar Minimum needed pressured air supply 4 5 bar Sensor Suction pipe 25m
Download Pdf Manuals
Related Search