ELATION eNODE8 - USER MANUAL 1.0
Contents
1. ELATION eNODE 8 Pro ITI pe yd D gt O 0 oo z C N D gt 0 gt C Q O www elationlighting com User Manual 1 0 2 eNODE 8 User Manual 1 0 EtATION www elationlighting com 92013 ELATION PROFESSIONAL all rights reserved Information specifications diagrams images and instructions herein are subject to change without notice ELATION PROFESSIONAL logo and identifying product names and numbers herein are trademarks of ELATION PROFESSIONAL Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted Product names used in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged All non ELATION brands and product names are trademarks or registered trademarks of their respective companies ELATION PROFESSIONAL and all affiliated companies hereby disclaim any and all liabilities for property equipment building and electrical damages injuries to any persons and direct or indirect economic loss associated with the use or reliance of any information contained within this document and or as a result of the improper unsafe insufficient and negligent assembly installation rigging and operation of this product Elation Professional USA 6122 S Eastern Ave Los Angeles CA 90040 323 582 3322 323 832 9142 fax www elation2. CO 5 Isolated Mode Isolates the DMX Input and Output ports NO signals from the Input ports are passed to the Output ports the Output ports receive DMX signals directly from the network individually 6 Factory Setting All settings including the Device Name Device ID and Device IP will be restored to the original settings 17 eNODE 8 User Manual 1 0 EtATION www elationlighting com Version You can check the units firmware version from this option Version B1 0 V1 0 Ur Please Note Devices may not be connected in a Looping fashion 18 eNODE 8 User Manual 1 0 Et ATION TECHNICAL SPECIFICATIONS FEATURES 8 Universal DMX Ports can be set as Input or Output 2 RJ45 TCP IP 10 100M Ethernet Connections Rotary Menu Wheel Function Selection Button LCD Menu Function Display PowerCON Power In Auto MDI MDIX DMX 512 and ArtNet Support ArtNet DMX Bilateral Signal Conversion www elationlighting com DMX Splitter Function 1 Input 7 Outputs or 1A Input 3A Outputs and 1B Input 3B Outputs LCD Display amp LED Indicators Broadcast Mode One Device Transmits Same Signal to Other Connected Devices Backup Mode CONTROL CONNECTIONS 8 5pin DMX Ports 2 RJ45 TCP IP 10 100M Ethernet Connections Rotary Menu Wheel Function Selection Button LCD Menu Function Display PowerCON Power In SIZE WEIGHT Length 19 0 482mm Width 6 3 160mm Vertical Height 1
3. Clone 5 lsolated mode 6 Factory Settings 7 Exit There are 6 User Preset setting options which are described below 1 8 X Input Set each of the 8 DMX ports as Inputs 2 DMX Split 1 7 Device functions as a single 1 7 splitter 1 DMX Input 7 DMX Outputs Please note that the LED indicator of the DMX Output port will light up GREEN a plit 1 7 r F3 C hoy 3 2 a r a neu C n c yy yL ow 0 gy 5 e y y d a lal a E 7m 2 5 i 1 1 y Y Lr Y 4 1 if RY T y Uu i gt i y X y X y X Fw a DU d gt DE dm Wl a CP a I DU Mm DV v ze DA sm n CA a Ni ih 0 I iL 00 2 a i ih E sw ies i 4 i t Pw TZ d L C2 ME iR s 6 A J OMX IN 7 OMX OUT 16 eNODE 8 User Manual 1 0 www elationlighting com 3 DMX Split 1 3 Device functions as a dual 1 3 splitter 1A DMX Input 3A DMX Outputs 1B DMX Input 3B DMX Output Please note that the LED indicator of the DMX Output port will light up GREEN DMXSplit 1 3 C3 vt E 2 ER T 7 eNode fl EM DMXIN A 3DMXOUTA DMX IN B 3DMXOUTB 4 ArtNet Clone Direct through mode the preset is used to replicate a standard ArtNet signal from 4 1 4 Input Ports to 4 5 8 Output Ports Artnet Out DAA onm 6 eNode8 II danas eG
4. charges must be pre paid If the requested repairs or service including parts replacement are within the terms of this warranty Elation Professional will pay return shipping charges only to a designated point within the United States If the entire instrument is sent it must be shipped in its original package No accessories should be shipped with the product If any accessories are shipped with the product Elation Professional shall have no liability what so ever for loss of or damage to any such accessories nor for the safe return thereof C This warranty is void if the serial number has been altered or removed if the product is modified in any manner which Elation Professional amp concludes after inspection affects the reliability of the product if the product has been repaired or serviced by anyone other than the Elation Professional amp factory unless prior written authorization was issued to purchaser by Elation Professional if the product is damaged because not properly maintained as set forth in the instruction manual D This is not a service contract and this warranty does not include maintenance cleaning or periodic check up During the period specified above Elation Professional amp will replace defective parts at its expense and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship The sole responsibility of Elation Professional amp under this warranty shall b
5. 7 44mm Weight 4 6 lbs 2 1kg ELECTRICAL THERMAL AC 100 240V 50 60Hz 7W Max Power Consumption 35 6 F 2 C to 113 F 45 C APPROVALS RATINGS CE Pending cETLus Pending Please Note Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice DIMENSIONAL DRAWINGS 19 eNODE 8 User Manual 1 0 ET ATION www elationlighting com PROFESSIONAL 17 3 440mm 5 7 145mm Please Note Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice 20 eNODE 8 User Manual 1 0 www elationlighting com OPTIONAL ACCESSORIES ORDER CODE ITEM DESCRIPTION CATOO5 o foot 1 5m CAT6 EtherCON Cable CATO10 10 foot 3m CAT6 EtherCON Cable CATO15 15 foot 4 5m CAT6 EtherCON Cable CATO25 29 foot 7 5m CAT6 EtherCON Cable CATO50 50 foot 15m CAT6 EtherCON Cable CATO100 100 foot 30m CAT6 EtherCON Cable CATO0150 150 foot 45 7m CAT6 EtherCON Cable CATO200 200 foot 61m CAT6 EtherCON Cable CATO300 300 foot 91 4m CAT6 EtherCON Cable ACSPDMX5PRO o foot 1 5m 5 pin PRO DMX Cable AC5PDMX10PRO 10 foot 3m 5 pin PRO DMX Cable AC5PDMX15PRO 15 foot 4 5m 5 pin PRO DMX Cable ACSPDMX25PRO 29 foot 7 5m 5 pin PRO DMX Cable AC5PDMX50PRO 50 foot 15m 5 pin PRO DMX Cable AC5PDMX100PRO 100 foot 30m 5 pin PRO DMX Cable 21 eNODE 8 User Manual 1 0
6. X Port option and then press the rotary wheel to confirm your selection Now you can set the parameter of the each DMX port by pressing and turning the rotary wheel DMX Port 1 DMX Port 1 2 DMX Port 2 12 eNODE 8 User Manual 1 0 www elationlighting com 1 8 DMX PORT INPUT Artnet Out You can set the Port Status of any the DMX Ports 1 8 as Input IN Then only the principle universal is available It can be set within the range 0 0 F F When the DMX Port is set as IN the Port Mode can only be set as Normal or Backup DMX Port 1 Port Status N 2 Port Mode Normal Port Mode Normal Device will send data received from DMX IN port to the universal of network regardless if there is any data in the universal of the network Port Mode Backup Device will NOT send any data to the universal of network Only when the universal of network is no any data will the device receive the data from DMX IN port and send it to the universal of network simultaneously 13 eNODE 8 User Manual 1 0 www elationlighting com 1 8 DMX PORT OUPUT DMX Port DMX Port 1 Port Status OUT 1 Port Status OUT 2 Port Mode HTP 2 Port Mode LTP DMX Port 1 Port Status OUT 1 Port Status OUT 2 Port Mode Zero 2 Port Mode Single You can set the Port Status of any the DMX Ports 1 4 as Output OUT When the Port Status is set to OUT the Port Mode can be set to one of the following 4 modes Zero the port sends out a DMX test signa
7. also be written down on a piece of paper and included in the shipping container If the unit is under warranty you must provide a copy of your proof of purchase invoice Items returned without a R A number clearly marked on the outside of the package will be refused and returned at customers expense You may obtain a R A number by contacting customer support at 323 582 3322 Sr IMPORTANT NOTICE There are no user serviceable parts inside this unit Do not attempt any repairs yourself doing so will void your manufactures warranty Damages resulting from modifications to this fixture and or the disregard of safety and general user instructions found in this user manual void the manufactures warranty and are not subject to any warranty claims and or repairs 6 eNODE 8 User Manual 1 0 EtATION www elationlighting com 2 YEAR LIMITED WARRANTY A Elation Professional hereby warrants to the original purchaser Elation Professional products to be free of manufacturing defects in material and workmanship for a period of two years 730 days from the date of purchase This warranty shall be valid only if the product is purchased within the United States of America including possessions and territories It is the owner s responsibility to establish the date and place of purchase by acceptable evidence at the time service is sought B For warranty service send the product only to the Elation Professional factory All shipping
8. cord is damaged replace it immediately with a new one of similar power rating NEVER OPEN DEVICE WHILE IN USE e This device is designed for INDOOR DRY LOCATIONS ONLY e DO NOT operate device in locations with temperatures above 113 F 45 C or below than 35 6 F 2 C e DO NOT operate device in locations with excessive dryness or humidity ideal conditions are between 35 and 80 RH Relative Humidity e DO NOT operate device in areas subject to extreme vibrations or bumps e Please make sure there are NO FLAMMABLE MATERIALS close to this device while operating to prevent any fire hazard e Do not permit operation by persons who are not qualified for operating this type device Most damages are the result of operations by nonprofessionals e Please use the original packaging and materials to transport this device in for service 8 eNODE 8 User Manual 1 0 www elationlighting com DEVICE OVERVIEW PF Fy eNotes e M n a f 8 1 RJ45 Ethernet Connector Network Connection 2 RJ45 Ethernet Connector Network Connection 3 5pin DMX PORTS 1 8 with LED Indicators DMX Input Or DMX Output Ports 4 Power LED Indicates Power is ON 5 LINK LED Indicates Network Connection Status 6 ACTIVITY LED Indicates Network Activity Status flash when data is transmitting 7 LCD Menu Function Display Displays Menus And Functions 8 MENU Butt
9. der the status of Output SET ID NO Enter into the main menu by pressing the rotary wheel Turn the rotary wheel to Set ID NO option and then press the rotary wheel to enter into its menu window Press the rotary wheel to change the ID NO Turn the rotary wheel clockwise or counter clockwise to set a new ID press the rotary wheel to confirm Available ID s are 001 to 255 Turn rotary wheel clockwise to Enter and save ID NO Device ID 001 Cancel Enter Set LCD Backlight Enter into the main menu by pressing rotary wheel and then turn the rotary wheel to select the LCD Backlight option and then press the rotary wheel to confirm your selection You can select between ON backlight remains ON or OFF backlight turns OFF automatically after 30 seconds of idle time by turning the rotary wheel Confirm your selection and move to next option by pressing the rotary wheel LCD BackLight 1 ON 2 OFF 15 eNODE 8 User Manual 1 0 www elationlighting com User Preset Enter into the main menu by pressing the rotary wheel and then turn the rotary wheel to select the User Preset option and then press the rotary wheel to confirm your selection These settings help you to easily use the device and avoid complicated setup procedures You can simply choose your desired presets by turning the rotary wheel and then pressing the rotary wheel to confirm your selection User Preset 1 8 X Input 2 DMX Split 1 7 3 DMX Split 1 3 4 ArtNet
10. e limited to the repair of the product or replacement thereof including parts at the sole discretion of Elation Professional All products covered by this warranty were manufactured after January 1 1990 and bare identifying marks to that effect E Elation Professional amp reserves the right to make changes in design and or improvements upon its products without any obligation to include these changes in any products theretofore manufactured F No warranty whether expressed or implied is given or made with respect to any accessory supplied with products described above Except to the extent prohibited by applicable law all implied warranties made by Elation Professional amp in connection with this product including warranties of merchantability or fitness are limited in duration to the warranty period set forth above And no warranties whether expressed or implied including warranties of merchantability or fitness shall apply to this product after said period has expired The consumer s and or Dealer s sole remedy shall be such repair or replacement as is expressly provided above and under no circumstances shall Elation Professional amp be liable for any loss or damage direct or consequential arising out of the use of or inability to use this product G This warranty is the only written warranty applicable to Elation Professional amp Products and supersedes all prior warranties and written descriptions of warranty terms a
11. l with all channels at 0 Single the port sends out the DMX values of the selected principal ArtNet universe The DMX output is enabled the first time it detects the DMX universe on the network or internal DMX inputs LTP Latest Takes Precedence Port will output the latest channel activity on channel by channel basis The unit will compare the principal and secondary universes and send the latest one to the network Please note that in the LTP mode you should ensure the RESEND option is not DISABLED or it will NOT RESEND the data to the network HTP Highest Takes Precedence Like Single but will merge two DMX universes principal and secondary and will output the one with higher value The unit will compare the two universes and resend the higher values to the network They can be set within the range of 0 0 F F Please note that in the HTP mode you should ensure the RESEND option is not DISABLED or it will NOT RESEND the data to the network Out DMX n i 14 eNUDE amp User Manual 1 0 www elationlighting com 1 8 DMX PORT DISABLED DMX Port 1 Port Status DIS 2 Port Mode Backup You can set the Port Status of any the DMX Ports 1 4 as Disabled DIS When the Port Status is set as DIS the DMX port will be disabled and will not send or receive any data L Please note that the Framerte fs is only available for Output status The Secondary and Resend options are only available for the HTP LTP mode un
12. lighting com info elationlighting com Elation Professional B V Junostraat 2 6468 EW Kerkrade Netherlands 31 45 546 85 66 31 45 546 85 96 fax www elationlighting eu info elationlighting eu 3 eNODE 8 User Manual 1 0 www elationlighting com CONTENTS General Information Warranty Safety Instructions Device Overview Operation Guide Technical Specifications Optional Accessories 4 eNODE 8 User Manual 1 0 www elationlighting com GENERAL INFORMATION INTRODUCTION Congratulations you have just purchased one of the most innovative and reliable ArtNet to DMX converter on the market today The eNODE 8 has been designed to perform reliably for years when the guidelines in this booklet are followed Please read and understand the instructions in this manual carefully and thoroughly before attempting to operate this unit These instructions contain important information regarding safety during use and maintenance UNPACKING Thank you for purchasing the eNODE 8 by Elation Professional amp Every eNODE 8 has been thoroughly tested and has been shipped in perfect operating condition Carefully check the shipping carton for damage that may have occurred during shipping If the carton appears to be damaged carefully inspect your unit for damage and be sure all accessories necessary to operate the unit have arrived intact In the event damage has been found or parts are missing please contact our c
13. nd conditions heretofore published 7 eNODE 8 User Manual 1 0 EtATION www elationlighting com SAFETY INSTRUCTIONS The eNODE 8 is an extremely sophisticated piece of electronic eguipment To guarantee a smooth operation it is important to follow the guidelines in this manual The manufacturer of this device will not accept responsibility for damages resulting from the misuse of this device due to the disregard of the information printed in this manual This device falls under PROTECTION CLASS 1 It s essential this device is grounded properly and only qualified personnel perform all electrical connections e For proper operation only qualified and certified personnel should perform installation of this device Do not attempt installation and or operation without proper knowledge how to do so Any modifications to this device will void the original manufactures warranty and increase the risk of damage and or personal injury e Air inlets must remain clean and never blocked Device must be installed in a location with adequate ventilation Allow approx 6 15cm between this device and other devices or a wall for proper cooling e Always disconnect from main power source before performing any type of service and or cleaning procedure Only handle the power cord by the plug end never pull out plug by tugging wire the cord e Do not operate device if the power cord has become frayed crimped and or damaged If the power
14. nected Active Port O DMX Output I DMX Input RENAME DEVICE Enter into the main menu by pressing the rotary wheel and then turn the rotary wheel to select the Rename Device option and then press the rotary wheel to confirm your selection Now you can rename the device by pressing and turning the rotary wheel Confirm your selection and move to next option by pressing the rotary wheel s Rename ArtNet To DMX Cancel Enter 11 eNODE 8 User Manual 1 0 www elationlighting com SET IP ADDRESS Enter into the main menu by pressing the rotary wheel and then turn the rotary wheel to select the Set IP Address option and then press the rotary wheel to confirm your selection Now you can set the IP address by pressing and turning rotary wheel Confirm your selection and move to next option by pressing the rotary wheel IP Address 002 010 010 002 Cancel Enter RE Please Note Each IP address must be unique SET NETMASK Enter into the main menu by pressing the rotary wheel and then turn the rotary wheel to select the Netmask option and then press the rotary wheel to confirm your selection Now you can set the Netmask by pressing and turning rotary wheel Confirm your selection and move to next option by pressing the rotary wheel Netmask A 255 000 000 000 B 255 255 000 000 C 255 255 255 000 SET DMX PORT Enter into the main menu by pressing the rotary wheel and then turn the rotary wheel to select the DM
15. on Rotary Dial Used To Enter Main Menu And Select Functions 9 Power Switch Power ON OFF 10 Fuse Fuse Holder 11 PowerCON IN Power Connection To Power Source 9 eNODE 8 User Manual 1 0 www elationlighting com OPERATION GUIDE In today s demanding lighting control designs DMX channel requirements can number into the thousands And with the increased use of LED fixtures and video mapping it is now necessary to have extremely fast DMX response and well balanced network load management The ENODE 8 not only provides instant DMX Channel response but also lowers your network load It allows you to effectively increase the number of DMX universes and easily place them remotely on any TCP IP Ethernet network In addition the ENODE 8 can be used as a DMX Merger DMX Splitter and Backup device Router The ENODE 8 has an easy to navigate system menu which is detailed in the next section 10 eNODE 8 User Manual 1 0 www elationlighting com Device Name IP Address ArtNet To DMX 2 10 10 2 A B 1 2 3 4 5 6 7 8 ETIN ES ee SS NEL NEL I START UP VIEWS There are 4 different menu views as illustrated above to select when the device is initially powered on You can scroll through the 4 menu views by turning the rotary wheel All of the options can be changed in the main menu PORT STATUS A B Network Port 1 8 DMX ports 1 8 X NO Network Connected Inactive Port y Network Con
16. ustomer support team for further instructions Please do not return this unit to your dealer without first contacting customer support at the number listed below Please do not discard the shipping carton in the trash Please recycle whenever possible BOX CONTENTS 1 Power Cable e Manual amp Warranty Card IEY MANUAL UPDATES Please check www elationlighting com for the latest revision update of this manual 5 eNODE 8 User Manual 1 0 www elationlighting com CUSTOMER SUPPORT Elation Professionale provides a customer support line to provide set up help and to answer any question should you encounter problems during your set up or initial operation You may also visit us on the web at www elationlighting com for any comments or suggestions For service related issue please contact Elation Professional Service Hours are Monday through Friday 8 00 a m to 5 00 p m PST Voice 323 582 3322 Fax 323 832 9142 E mail support elationlighting com Forum www ElationLighting com forum WARRANTY REGISTRATION The eNODE 8 carries a two year 730 days limited warranty Please fill out the enclosed warranty card to validate your purchase All returned service items whether under warranty or not must be freight pre paid and accompany a return authorization R A number The R A number must be clearly written on the outside of the return package A brief description of the problem as well as the R A number must
Download Pdf Manuals
Related Search