Iron Rider 2.0 - Rockwell Time
Contents
1. Press B1 or B3 to activate the compass again If the watch enters the Compass mode for the first time it will automatically enter the compass calibration mode Active for 20 seconds 5 1 Compass Mode Press and hold B5 to enter compass calibration manually as shown below Press amp hold B5 for 2 sec Rotate the watch twice horizontally at a rate of 15 seconds per rotation Press B1 or B3 to end compass calibration and return to compass mode Rotate watch twice at 15 sec per turn 5 2 Compass Mode If you wish to set the declination angle press B5 after rotating the watch twice Setting the declination angle Press B1 or B3 to change the value of the blinking digit Press B4 to go to the next digit Once you re done press B5 to exit and return to compass mode 6 0 Barometer Mode Press B4 from TIME mode until watch displays BARO There are 5 views in Barometer mode to change views press B2 The views are as shown below View 1 Weather Icon Sea Level Barometric pressure Current Barometric pressure View 2 Weather Icon Sea Level Barometric pressure Temperature View 3 Difference View Weather Icon Sea Level Barometric pressure Current Barometric View 4 24 hour Recall View View 5 Weather Icon Current Barometric pressure and time 6 1 Barometer Mode Changing the Unit While in the first view you can change the barometric pressure unit by pressing and holdin2. setting option www RocKWELLWATCHES COM 2014 Rockwell Time Inc
3. SIDER HROCKWI GLL GODFREY IRON RIDER User Manual Contents 1 0 Introduction 2 0 Buttons 3 0 Functions 4 0 Current Time 5 0 Compass Mode 6 0 Barometer Mode 7 0 Altimeter Mode 8 0 Data Log Mode 9 0 Chronograph Mode 10 0 Timer Mode 11 0 Ski Mode 12 0 Alarm Mode 13 0 Set Mode 1 0 Introduction Thank you for purchasing the Godfrey Iron Rider II from Rider by Rockwell We are sure you will enjoy using this quality timepiece Please visit www rockwellwatches com or send us an email to info rockwellwatches com for any questions or to get more info This watch provides current time compass barometer altimeter data log chronograph timer ski and alarm functions For longer watch life avoid exposing it to extreme or harsh conditions for extended periods Avoid rough use or impacts Do not open the watch case unless it is done by a authorized service provider Keep this manual on hand as a reference For a video tutorial of this watch visit store rockwellwatches com collections iron rider 2 1 2 0 Buttons 3 0 Functions Navigating your watch The watch has the following modes TIME COMPASS BAROMETER ALTIMETER DATA LOG CHRONOGRAPH TIMER SKI ALARM and SET You can change modes by pressing B4 3 1 Night Mode Turning on Night Mode From the main TIME screen press and hold B3 to turn Night Mode on off When Night Mode is on the backlight will automatically turn o
4. a The watch has a maximum capacity of 10 Logs Press B4 from Altimeter mode to enter LOG DATA mode The watch will momentarily display LOG DATA and then display the latest log File Press B2 to view the other log data files B2 B2 D 00000000 gt 8 1 Data Log Mode Press B1 or B3 to view the details of a selected log file Each log contains your total ascend altitude and descend altitude average descend rate and ascend rate number of Hills this vertical movement ascend and descend equal to a 150 ft 50 m or more and total time of log book Press B2 to go back to log book selection How to delete a Log file To clear a selected Log file press and hold B5 until the watch display LOG CLR 01 Press B1 or B3 to select the LOG you wish to clear B1 B1 AS 6000000 B3 B3 B1 z B3 8 2 Data Log Mode Press B2 to confirm the selected log number To clear all data select ALL CLR and then press B2 Press amp hold B5 for 2secs 14 9 0 Chronograph Mode Press B4 from ALTI LOG mode Press B1 to start CHRONO Press B1 while CHRONO is running to take a lap Watch will display the lap time for 10 seconds 9 1 Chronograph Mode Press B3 to stop the Chrono Press and hold B3 for 2 seconds to clear CHRONO 10 0 Timer Mode Press B4 from CHRONO mode to TIMER mode Watch will display segment 1 and the set time for the timer The timer for this watch has a total of 5 segmen
5. g B3 until the new unit stops blinking as shown below Press amp hold B3 for 2 sec Press amp hold B3 N SE 2 sec rA 6 2 Barometer Mode Changing the Temperature unit from C to F or vice versa press B2 to go to the second view first Once in the second view press and hold B3 until the new unit stops blinking Press amp hold B3 for 2 sec gt Press amp hold B3 N for 2 sec a 6 3 Barometer Mode Difference View Press B1 to start the difference measurement and press B3 to stop the difference measurement Once stopped the watch will display sea level barometric pressure and current barometric pressure Press amp hold B3 for 2 sec 6 4 Barometer Mode 24 Hour Recall View To display the barometric pressure for the last 24 hours in graphical presenta tion Press B1 or B3 to scroll through the data HR 0 means the current pressure HR 1 is the pressure 1 hour ago and so on Calibrating the Barometer Press and hold B5 to enter calibration mode Press B1 or B3 to change value of the blinking digit Press B4 to move on to the next option as shown below The sea level barometric pressure you can get this information from your local weather station 7 0 Altimeter Mode Press B4 from Barometer mode to enter Altimeter mode The watch will momentarily display ALTI and then display the maximum altitude and accumulat ed altitude The display will then change to view 1 ALTI mode
6. has 4 views and to change views press B2 7 1 Altimeter Mode View 1 Current altitude and timer View 2 Difference View Current altitude and timer View 3 24 hour Recall View View 4 Current Altitude and time Changing the Unit Changing the altimeter unit from FT to M or vice versa press B2 to go to the fourth view first Once in the fourth view press and hold B3 until the new unit stops blinking 7 2 Altimeter Mode Recording an Altimeter Log You can only record an altimeter log in view 1 and 2 Amaximum of 10 logs can be created While in view 1 or view 2 press B1 to start recording Press B3 to stop the recording and to save your data press and hold B3 watch will display SAVE LOG ao KA SAE 7 3 Altimeter Mode 24 Hour Recall View You can view the previous 24 hours record of Altitude for that selected hour in the past Press B1 or B3 to scroll though the various data 7 4 Altimeter Mode Calibrating the Altimeter Press and hold B5 in any of the 4 views to enter calibration mode Press B1 or B3 to change the value of the blinking digit Press B4 to go to the next option Once you are done press B5 to exit calibration mode When calibrating the altimeter go to a location with a known altitude Press amp hold B5 for 2secs Acc Altitude a F ay nn duu Nv A 8 0 Data Log Mode Data Log Mode In this mode you can view your saved altimeter dat
7. l STORE ALTI stops blinking and the watch goes back to reset screen The watch is now ready to start but you still need to go up to your starting point considering you are setting at the finish line location Press amp hold B3 for 2 secs 11 2 Ski Mode 2 Manually setting the Base Altitude While in the reset view of the Ski mode press and hold B5 Continue holding B5 until the watch displays the Base Altitude The digits are now flashing Press B1 or B3 to change the value of the Base Altitude Press B5 to exit setting mode and the watch returns to reset view The watch will also auto exit setting mode if there is no button activity for 2 3 minutes The watch is now ready for the Ski run See next page for image Performing the SKI run While in Ski mode reset view press B1 to start The 10 seconds timer will start to countdown At the same time the watch will check your current altitude If your current Altitude is less than the base altitude 35 feet The Ski mode will not run and the watch will return to reset view If your current Altitude is more than the base altitude 35 feet The Ski mode will start counting up until you reach the base altitude The watch will auto stop at the base altitude giving you the exact time of your Ski run Press B3 to reset the timer 11 3 Ski Mode When the 10 second countdown reaches 0 watch will sound and the ski timer will automatically start 12 0 A
8. larm Mode Press B4 from Ski mode to Alarm mode The watch has only 1 alarm In this mode you can turn on or off the alarm and chime To set the alarm please refer to Set mode Press B1 to turn the alarm on or off 12 1 Alarm Mode Press B3 to go to the chime option 13 0 Set Mode Press B4 from ALARM mode to Set mode watch will display SET Press B5 to enter SET mode Press B1 or B3 to scroll through the different setting option Press B4 to enter selected setting option 13 1 Set Mode Setting the Time Press B1 or B3 until watch displays TIME SET then press B4 to enter Press B1 or B3 to change the value of the blinking digit Press B4 to go on to the next time setting option See next page for image 13 2 Set Mode Cael Anne Ficuun gt 13 3 Set Mode Setting the Unit Press B1 or B3 until watch displays UNIT SET then press B4 to enter Press B1 or B3 to change the value of the blinking digit Press B4 to go on to the next user setting option 13 4 Set Mode Setting the Timer Press B1 or B3 until watch displays TMR SET then press B4 to enter Press B1 or B3 to change the value of the blinking digit Press B4 to go on to the next user setting option 13 5 Set Mode Setting the Alarm Press B1 or B3 until watch displays ALM SET then press B4 to enter Press B1 or B3 to change the value of the blinking digit Press B4 to go on to the next user
9. n when any button is pushed between the hours of 19 00 and 07 00 7pm to 7am The light will NOT automaticall turn on during the day but can still be activated by pushing the Light Set button B5 Press amp hold B3 for 3 secs aa J A A m Ue 2 2 NS Roc EU A 4 0 Current Time Press B4 from Set mode to enter Time mode The watch will momentarily display TIME and then display view 1 The watch is equipped with a dual time feature which counts up individually with the same seconds It also features 4 different views at time mode each with a different set of information Following are the information in each view View 1 weather icon month date day of the week and time View 2 weather icon day of the week time and temperature View 3 weather icon day of the week time and current barometric pressure View 4 weather icon day of the week time and current altitude 4 1 Current Time Displaying Time 1 and Time 2 With Time mode displayed press and hold B1 for 2 seconds to switch to Time 2 Press and hold again for 2 seconds to switch back to Time 1 Press amp hold B1 for 2 secs 14 5 0 Compass Mode Press B4 from Time mode to enter Compass mode The watch will momentarily display COMP and then display and then the compass direction with bearing in degrees The compass will be active for 20 seconds After 20 seconds it will display back
10. ts To view the set time for other segments press B3 while timer hasn t been started 10 1 Timer Mode For steps on how to set the time for TIMER mode proceed to SET MODE Press B1 to start the timer If other segments have also been set as soon as segment 1 reaches zero watch will alarm and then segment 2 will automatically start The timer will continually count down for a maximum of 20 loops Press B3 to stop the timer Press amp hold B3 again to reset timer to set time 10 2 Timer Mode Press and hold B5 to enter CLR ALL option This will clear all set time for all segments Press B1 or B3 to select YES or NO and press B5 to confirm Press amp hold B5 for 2secs 11 0 Ski Mode Press B4 from TIMER mode to enter SKI mode The watch will momentarily display SKI and then display the reset view The reset view shows the following 10 Second Countdown Timer Current altitude e Weather Icon This mode allows you to time your ski run accurately Base Altitude must be set first before you will be able to use this feature Setting your Base Altitude Base altitude is the altitude of the finish line of your Ski run There are 2 ways of setting your base altitude 11 1 Ski Mode 1 Using your current altitude at the finish line as your base altitude While in SKI mode and you being in the finish line location press and hold B3 The watch will display STORE ALTI Continue holding B3 unti
Download Pdf Manuals
Related Search