iBT4 User Manual
Contents
1. of infants and small children 9 gt Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner this unit has been designed and manufactured to ensure your personal safety However improper use can result in potential electrical shock or fire hazards Please read all safety and operating instructions carefully before installation and use and keep these instructions handy for future reference Take special note of all warnings listed in these instructions and on the unit 1 2 Water and Moisture The unit should not be used near water For example near a bathtub washbowl kitchen sink laundry tub swimming pool or in a wet basement Ventilation The unit should be situated so that its location or position does not interfere with its proper ventilation For example it should not be situated on a bed sofa rug or similar surface that may block ventilation openings Also it should not be placed in a builtin installation such as a bookcase or cabinet which may impede the flow of air through the ventilation openings Heat The unit should be situated away from heat sources such as radiators heat registers stoves or other appliances including amplifiers that produce heat Power Sources The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance Power Cable Protection Power supply cables sho2. you do not want us to replace your battery you should follow the disposal instructions below Never dispose of used batteries electronics with ordinary solid wastes since they contain toxic substances e Always dispose of used batteries electronics in accordance with the prevailing community regulations that apply to the disposal of batteries electronics If there are no local regulations concerning battery electronics disposal please dispose of the device in a waste bin for electronic devices Many electronics retailers now recycle batteries and other electronic components at no charge Check to see which ones in your area do so CAUTION The battery used in this device may present a risk of fire explosion or chemical burn if mistreated Never use or charge the battery if it appears to be leaking discolored deformed or in any way abnormal Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other electrolytic substance Always confirm that the temperature is 5 35 C 41 95 Fahrenheit before you charge the battery Leakage or deterioration of the battery may occur if this warning is not heeded Never expose the battery to any liquid Never expose the battery to excessive heat such as direct sunlight or fire Never use the battery pack in an nventilated vehicle where excessive internal temperatures may be encountered ways keep the battery out of the reach
3. an external speaker via the Line out jack located on the back of the unit to expand the audio playing from the iBTA l 2 3 Connect a 3 5 mm audio cable plug to the Line out jack on back of the unit and connect the other end to the line in jack on your external speaker Note that the line output signal is mono Turn Power Mode Dial RIGHT to any mode to turn the unit on The audio from the iBT4 will play from both the unit s speaker AND from the Line out jack Turn the Volume Dial to control the system volume The Volume Dial does NOT affect the output volume of the line out jack When done listening tum the Power Mode Dial to the OFF position left to tum the unit off Remember to turn off any connected audio device too NOTE The Line out jack is NOT a headphone jack 6 FM Radio Using the iBTA 1 Turn the Power Mode Dial on the unit to Radio mode center 2 Press lt or gt Buttons on the unit to tune in the desired station press and hold to scan to the next clear station 3 The unit has an external telescoping FM radio antenna extend it gently and adjust it for best FM reception 4 Tum the Volume Dial to control the system volume 5 When done listening tum the Power Mode Dial to the OFF position left to turn the unit off Using FM Radio in Other Countries Different areas of the world use different FM frequency steps and ranges By default this unit is set to USA frequency steps To us
4. d once a previously paired device is detected 2 Press the gt Pairing Play Pause Button on the unit to play audio from your linked Bluetooth device While audio is playing press to pause play and again to resume play 3 Press the or Buttons on the unit go to the previous or next track Press and hold briefly to scan backward or forward within tracks 4 Turn the Volume Dial to control the system volume NOTE The volume ranges from O 20 While the dial can still to be turned when these limits are reached doing so has no effect 5 When done listening turn the Power Mode Dial to the OFF position left to turn the unit off Remember to tun off your audio device too Playing Audio via Line In 1 Using the iBTA Connect one end of the included stereo 3 5mm audio cable into the line in jack on the back of the unit and the other end into the headphone or output jack of your audio device NOTE The unit defaults to Line in mode when the audio cable is connected It will not play FM radio or Bluetooth audio in this mode Tum the Power Mode Dial RIGHT to any mode to turn it on Power on the audio device and use the controls on the device to play or pause audio and navigate tracks Turn the Volume Dial to control the system volume When done listening turn the Power Mode Dial to the OFF position left to turn the unit off Remember to unplug the audio cable Playing Audio via Line out You can connect the unit to
5. e PAIR will flash on the display indicating pairing attempt ected or similar message appears select iHome iBTA on the device to connect it If your device asks for a password enter 1234 or 0000 on the keyboard of your device If no device is paired within 2 minutes a tone will sound and the unit will revert to its previous mode To retry pairing turn the Power Mode Dial to the OFF position left then follow steps 2 amp 3 again 4 Once paired with a device the PAIR indicator on the display wi the Bluetooth icon will remain On some devices you must then se stop flashing then disappear and ect Use as Audio Device or similar on the device s Bluetooth menu Once paired your device should link to the iBT4 whenever within range about 30 feet pun NOTE The unit can autolink with up to previously paired devices A Using the iBTA When you power ON the speaker it will automatically link with the previously paired Bluetooth device as long as that device is still within range about feet To pair with a different device you must turn off the Bluetooth capability of the already paired device Pairing with a Different Device Playing Audio Via Bluetooth 1 Tum the Power Mode Dial to the Bluetooth position right to enter Bluetooth mode The Bluetooth Indicator on the display will flash and a tone will sound as the unit searches for a previously paired device and then tum soli
6. e the radio outside the USA 1 Turn the Power Mode Dial on the unit to Radio mode center 2 Press and hold BOTH 4 and gt Buttons TOGETHER until USA appears in the display 3 Press and release the Buttons to cycle to your location Europe Japan Australia China or USA Press and release BOTH and Buttons TOGETHER to exit frequency setting mode Using the iBTA If the unit locks up or becomes unresponsive you can reset it to factory settings do so press and hold the gt Button and gt Button TOGETHER for 8 SECONDS A long beep will sound indicating the unit has been reset Note that you will need to re pair Bluetooth devices Resetting the Unit Note There is also a Reset port in the back of the unit Insert the end of a paper clip or similar and hold briefly A tone will indicate the unit has reset Bluetooth links will remain intact LINE DUT DE 12v B 5R LINE IN RESET TJ Reset port Reset the iBTA by using a paper clip lt gt to press the reset button Internal Rechargeable Lithium ion Battery This device uses an internal rechargeable lithium ion battery that should last the lifetime of the device If you suspect your battery may be dead try charging it several times If the battery does not recharge please contact us for repair information WARNING DISPOSAL OF UNIT Please do NOT attempt to change the battery yourself If the battery has died and
7. eo audio cable The handle of the unit can be placed in power adaptor audio two positions upright for carrying or back cable for general use or tiltback play Using the iBTA Setting Up the Unit The unit can be operated using the included AC adaptor or on the internal rechargeable lithium ion battery for portable use Connect the included AC adaptor to the DC jack located on the back of the unit and connect the other end to a working wall outlet Charging the Unit The internal lithium ion battery charges when connecled to power via the AC adaptor For first time use charge the battery completely for about 6 hours The battery indicator on the display shows the battery charging status Operating the Unit in Battery Mode When operating on battery power the display shuts off automatically after 5 seconds to Battery Indicator charge status conserve battery power Fully charged Needs charging Using Bluetooth Pairing Your Device Using the iBTA 1 Tum on your Bluetooth enabled device and turn on Bluetooth capability as described in the device s user manual 2 Turn the Power Mode Dial right to turn the unit ON pairing is available in any mode 3 Press and hold the Pairing Play Pause Button on the unit 2 seconds to begin R IE iHome iBTA should appear on your device s menu If Not Conn pairing the unit with your devic
8. iBTA Bluetooth Wireless Boombox with FM Radio and Rechargeable Battery instruction manual iBTA Introduction Thank you for purchasing the iHome iBT4 This product is designed to provide high quality wireless sound for your iPad iPhone iPod computer PDA or other Bluetooth audio device Along with the included Quick Bluetooth Connection Guide this instruction booklet explains the basic operation and care of the unit Please read them carefully and keep for future reference Maintenance Place the unit on a level surface away from sources of direct sunlight or excessive heat Protect your furniture when placing your unit on a natural wood and lacquered finish A cloth or other protective material should be placed between it and the furniture Clean your unit with a soft cloth moistened only with mild soap and water Stronger cleaning agents such as benzene thinner or similar materials can damage the surface of the unit FCC Information iBTA FCC Radiation Exposure Statement This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment This transmitter must not be co located or operating in conjunction with any other antenna or transmitter This Device complies with RSS 210 of the IC Rules Operation is subject to the following two conditions 1 This device may not cause interference and 2 This device must accept any interference received includ
9. ing interference that may cause undesired operation This device complies with Part 15 of the FCC Rules operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Warning Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different fr
10. om that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help This Class B digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe B est conforme la norme NMB 003 du Canada QDID B020169 Table of Contents Meet ele e at e b bed ott eh 1 2 Setting Us the Unit Chatging the et eoe eee te pt dee nag 3 Using Bluetooth Pairing Your 422 122 e ee eee eene 4 Playing Audio Vice BIUBIGOITd e t ote o re br setti eto eal Playing Audio Via Auxin Playing Audio Via 22 2 0 02 202020590 ee 6 FM Radio Using FM Radio in Other Countries 7 Resetting the sts E st eb e dle ort tS p tee edes 8 nternal Rechargeable Lithium ion Battery 4 2 122222 2222 2 222 9 Consumer Product Safe Guide ete et ce 10 11 Troubleshooting EROR R eu cu bt 12 MVGITECIBIB Ss acie ete e eb teste dat edt t ete e ea 13 iBTA Meet Your iBTA Power Mode Dial Display Volume Dial Reverse Forward Setting Buttons Play Pause and Pairing Button Back Bottom LINE OUT B 5R LINE IN RESET Qo go Line out Jack DC Jack Line in Jack iBTA Included iBTA system 100V 240V universal AC adaptor e 3 5mm ster
11. or the address of the Factory Service Center 2 Remove the batteries if applicable and pack the unit in a well padded heavy corrugated box SDI is not responsible for damage that occurs during shipping to the Factory Service Center 3 Enclose a photocopy of your falis receipt credit card statement or other proof of the date of purchase if within the warranty period Also include your name and address information a brief description for why the unit is being returned and the return authorization number No unit can be processed without a return authorization number 4 Write the return authorization number on the side of the shipping package and send the unit prepaid and insured to the Factory Service Center address authorized by SDI Customer Service Disclaimer of Warranty NOTE This warranty is valid only if the product is used for the purpose for which it was designed It does not cover i products which have been LE by negligence or willful actions misuse or accident or which have been modified or repaired by unauthorized persons ii cracked or broken cabinets or units damaged by excessive heat iii damage to digital media players CD s or tape cassettes it applicable iv the cost of shipping this product to the Factory Service Center and its return to the owner This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original purchaser In no even
12. orking properly Check your device s manual for details on Bluetooth pairing and linking For further information and to see the latest instructions visit www ihomeaudio com support 12 Limited 1 Year Warranty iHome Products a division of SDI Technologies Inc hereafter referred to as SDI warrants this product to be free from defects in workmanship and materials under normal use and conditions for a period of one 1 year from the date of original purchase Should this product fail to function in a satisfactory manner it is best to first return it to the store where it was originally purchased Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period SDI will repair or at its discretion replace this product without charge This decision is subject to verification of the defect or maltunction upon delivery of this product to the Factory Service Center authorized by SDI Customer Service The product must include proof of purchase including date of purchase An outoF warranty fee for service will be charged for units that are received without proof of purchase Before returning this product for service please first replace the batteries if applicable with fresh ones as exhausted or defective batteries are the most common cause of problems encountered If service is still required 1 Call SDI Customer Service at 1 800 288 2792 for Return Authorization and f
13. t will SDI or any of its affiliates contractors resellers their officers directors shareholders members or agents be liable to you or any third party for any consequential or incidental damages any lost profits actual exemplary or punitive damages Some states do not allow limitations on implied warranties or exclusion of consequential amages so these restrictions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state Your acknowledgement and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually binding to you upon your transfer of currency money order cashier s check or credit card for purchase of your SDI product 2013 SDI Technologies Inc All rights reserved Questions Visit www ihomeaudio com iBI4012920138 or call 1 800 288 2792 Toll Froo Printed in China
14. uld be routed so that they are not likely to be walked on or pinched by items placed upon or against them It is always best to have a clear area from where the cable exits the unit to where it is plugged into an AC socket Cleaning The unit should be cleaned only using a warm damp cloth Do not use solvents etc Objects and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product 10 Attachments Do not use attachments not recommended by the product manufacturer lightning and Power Surge Protection Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time This will prevent damage to the product due to lightning and powerline surges Overloading Do not overload wall sockets extension cords or integral convenience receptacles as his can result in a risk of fire or electric shock Damage Requiring Service The unit should be serviced by qualified service personnel when A the power supply cable or plug has been damaged B objects have fallen into or liquid has been spilled into the enclosure C the unit has been exposed to rain D the unit has been dropped or the enclosure damaged E the unit exhibits a marked change in performance or does not operate normally Periods of Nonuse If the unit is to be left un
15. used for an extended period of time such as a month or longer the power cable should be unplugged from the unit to prevent damage or corrosion Servicing The user should not attempt to service the unit beyond those methods described in the user s operating instructions Service methods not covered in the operating instructions should be referred to qualified service personnel Questions Visit www ihomeaudio com or call 1 800 288 2792 Toll Free Troubleshooting Unit doesn t respond no power Moke sure unit is completely charged Check that all connections are correct and properly plugged in e Make sure your device is properly paired with the iBTA Make sure the Power Mode Dial is not in the OFF left position Unit doesn t respond locked up or frozen The unit may need to be reset To do so press and hold the gt Button and the Button TOGETHER for 8 SECONDS A long beep will sound indicating the unit has been reset Trouble pairing device computer with iBT4 Bluetooth implementation varies depending on your device s hardware and operating system Please see our website for updates on pairing When you power ON the speaker it will automatically link with the last previously paired Bluetooth device if the device is still within range approx 30 feet To pair with a different device you must turn off Bluetooth capability on the already paired device or take it out of range Make sure your device is w
Download Pdf Manuals
Related Search