USER MANUAL
Contents
1. two Bluetooth devices with the Wave first pair them by following the pairing procedure described in the Pairing with Bluetooth devices section for each device and then turn off the headset When turned on again the Wave will automatically attempt to connect to the 2 most recently paired devices as long as they have Bluetooth enabled and are within range If a device that has already been paired does not connect automatically select Air Fi Wave from the Bluetooth menu of the device If you no longer wish to connect to multiple devices disable Bluetooth on the device you do not want connected to the Wave or remove the Air Fi Wave pairing from the Bluetooth menu of the device Multipoint Functionality Status Function Operation Pause audio playback on the active Play media on other device device and start audio playback on the other connected device Media playing on one device It may take up to 10 seconds for audio to switch Incoming calls will always take precedence over media If media is playing on one device and an incoming call is received on the other device the Wave will pause the media on the active device and activate the device with the incoming call Once the call is ended the Wave will reactivate the original device and resume playback with most media applications For phone call controls see the Controlling Phone Calls section USING AS A WIRED HEADPHONE The Wave can be used as a wired head2. T LTE 12 26 PM as 95 EP battery indicator TURNING ON AND OFF To turn on press and hold the Multifunction button for about 2 seconds The headphone will say power on and the status indicator light will flash blue To turn off press and hold the Multifunction button for about 4 seconds The headphone will say power off and the status indicator light will flash red PAIRING WITH BLUETOOTH DEVICES Your headset must be paired to a Bluetooth device before it can be used It is only necessary to pair your headset once with each device 1 Make sure the Wave is turned off and within 3 feet 1 meter of your device Press and hold the Multifunction button for about 5 seconds until you hear the headphone say Pairing The status indicator light will flash red and blue in an alternating pattern while the Wave is in pairing mode Note The Wave will enter standby mode if not paired within 2 minutes 2 Open the Bluetooth menu on the device you wish to pair see Locating the Bluetooth menu section below for more details Some devices require you to select search for devices or add new device in order to create a Bluetooth pairing 3 Wait until you see Air Fi Wave on your device screen 4 Select Air Fi Wave on your device and follow any further prompts to pair Use 0000 if a pin is required Once connected the status indicator light will be solid blue LOCATING THE BLUETOOTH MENU iPhone
3. USER MANUAL NMrave Bluetooth Wireless Stereo Headphones with Headset Functionality Model AF36 PACKAGE CONTENTS Aave Bluetooth Wireless Stereo Headphones with Headset Functionality Wave Stereo y p Micro USB Bluetooth charging Wireless cable Headphones Carrying Stereo audio pouch cable for of wired use User manual PRODUCT OVERVIEW Anave Bluetooth Wireless Stereo Headphones with Headset Functionality Left Earcup Right Earcup A Status indicator light F Audio jack for wired use B Play pause multifunction button G Charging connector C Volume up button H Next track button D Previous track button 4 1 Built in microphone E Volume down button CHARGING You must completely charge the headset before the first use Connect the Micro USB charging cable to any powered USB port and to the charging jack of the Wave which is located underneath a cover on the left earcup Make sure it is plugged in fully Charge time is approximately 2 hours The red charging indicator light will stay lit while the headphones are charging and turn off when they are ready for use When the battery is low the status indicator light will be solid red and the headset will say battery low every 60 seconds Apple devices such as the iPhone iPad and iPod touch will display an on screen headset battery indicator while the Wave is connected wil AT amp
4. e of their respective owners 9 PIECE www MEEaudio com support meelec com
5. ect sunlight g Replacement parts and accessories are available online at www MEEaudio com WARNING Using headphones at high volumes for extended periods of time will result in permanent hearing damage It is advised you keep volume levels medium to low at all times for your safety Do not use while driving a car cycling operating machinery or performing other activities that require hearing surrounding sounds It is advised to turn the volume on your device all the way down before connecting your headphones then gradually increase the volume until you reach a comfortable listening level SPECIFICATIONS See the Wave product page at www MEEaudio com for product specifications TROUBLESHOOTING Visit www meelec com bluetooth for additional Bluetooth information and troubleshooting WARRANTY The Wave is covered by a 1 year manufacturer warranty For more information visit www meelec com warranty Nave KEE sao MEE audio and its logo are registered trademarks of S2E Inc All rights reserved iPhone iPad iPod touch and Siri are registered trademarks of Apple Inc Android is a registered trademark of Google Inc Windows Phone is a registered trademark of Microsoft Corporation in the United States and other countries The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG Inc and any use of such marks by MEE audio is under license Other trademarks and trade names are thos
6. iPad and iPod touch a On your device open the Settings menu b Select Bluetooth If Bluetooth is not on turn it on The iPhone iPad iPod will automatically search for new devices Android Phones and Tablets a On your device open the Settings menu b Select Bluetooth on older Android devices Bluetooth is found in the Wireless amp Networks menu If Bluetooth is not on turn it on Select Search for Devices if your phone or tablet does not automatically search for new devices Windows Phone 8 devices a On your device open the Settings menu b Select Bluetooth If Bluetooth is not on turn it on The Windows phone will automatically search for new devices Computers Laptops and Other Devices Visit www meelec com bluetooth for pairing connecting and setup information If pairing fails after several tries please refer to your device s user manual for further information Visit www meelec com bluetooth for pairing videos troubleshooting and additional information 4 CONNECTING TO PAIRED DEVICES Once the Wave is turned on it will automatically connect with the last paired Bluetooth device that is on and within range If the Wave is not connected automatically tap the Multifunction button once to initiate connection with last paired device If the headset still does not connect open the Bluetooth menu on your device and select Air Fi Wave from the Bluetooth device list Note On some com
7. phone by plugging one end of the included stereo audio cable into the jack on the left earcup and the other end into any audio device with a standard 3 5mm headphone jack This allows use when the battery is depleted and with devices that do not have Bluetooth such in flight entertainment systems or aren t paired The Wave can be used wired while also connected via Bluetooth to another device Bluetooth audio takes precedence over wired audio Wired audio will be partially muted whenever a signal is transmitted via Bluetooth and will resume approximately 4 seconds after the Bluetooth transmission ends Note The built in microphone of the Wave will not work in wired mode SAFETY AND CARE a When not in use power the headphones off and store in the included protective carrying pouch b Clean with a soft cloth damp with diluted soap water solution if necessary Do not use chemical cleaners c There are no user replaceable reparable parts in the headphones Disassembling the device will void your warranty d Do not expose the headphones to liquids If the device comes in contact with liquids quickly wipe away If submersed in water do not turn the device on until completely dried Note liquid submersion voids the warranty e Do not use around flammable gasses as fire or explosion may occur f Battery performance will be severely decreased when stored in extreme temperatures below 10 C 14 F or above 45 C 113 F including dir
8. puters the Bluetooth connection must be established manually every time CONTROLS The Wave can control media and phone calls from a smartphone or tablet Adjusting Volume Function Operation Increase volume Short press the Volume up button Headset will produce a tone when volume reaches the minimum Decrease volume Short press the Volume down button or maximum level Note volume adjustments made while playing media will change the volume of the headset independently of the connected device Raise or lower device volume as needed to further increase or decrease the overall volume Some newer devices use AVRCP 1 4 Bluetooth Profile which will allow the Wave to control the device volume directly at all times Controlling Phone Calls Status Function Operation Answer call Press the Multifunction button Incoming call Press and hold the Multifunction Reject call button for 2 seconds End call Press the Multifunction button Call in progress Press and hold the Multifunction Transfer call to headset button for 2 seconds continue to next page CONTROLS Continued Controlling Phone Calls Continued Status Call in progress Function Transfer call to headset Operation Press and hold the Multifunction button for 2 seconds phone handset active End call Press the Multifunction button Call in progress second incoming call Hang
9. up current call and answer new call Press the Multifunction button If you answer a call from your phone when a headset is connected most phones will activate the phone handset not the headset Press and hold the Multifunction button for 2 seconds to transfer the call to the headset Controlling Media Playback Status No media playing standby mode Function Play media Operation Press the Multifunction button Media playing Pause media playback Press the Multifunction button Skip to next track Press the Next track button Media playing or paused Restart the track previous track Press the Previous track 14 button You may need to focus on the media player application by bringing it up on the screen for initial playback to start Not all media players support this functionality Note If you answer or make a call while listening to media the media will be paused until the call has ended Additional Functionality Function Operation Media playing or standby mode R edial last call Double press the Multifunction button Not all devices support this functionality For more information refer to the user manual for your device MULTIPOINT Multipoint allows two Bluetooth devices to be connected to the Wave simultaneously Both devices will need to be paired before multipoint can be used Multipoint Pairing To use
Download Pdf Manuals
Related Search