Home

WIRELESS VIDEO MONITOR

Contents

1. SN H e VIEW YOUR WORLD WIRELESS VIDEO MONITOR USER S GUIDE ENGLISH VERSION 5 0 www lorextechnology com Welcome Thank you for purchasing the Lorex LIVE video monitor This user s guide refers to the following models W2401 e LW241 e LW2450 e LW2451 Contents Before you start make sure you have the contents listed below e 1x Video monitor e 1x Camera e 1x Video monitor charging cradle e 1x Camera power adapter e 1x Video monitor power adapter e 1x microSD memory card e 1x microSD to SD adapter card e 1x mini USB cable e 1x User s guide e 1x Quick start guide e 1x Driver CD e 1x Mounting screw kit e 3x Cable clips Optional Check the contents on your product package Safety Instructions WARNING This video monitor is compliant with all relevant standards regarding electromagnetic fields and is when handled as described in the User s Guide safe to use Therefore always read the instructions in this User s Guide carefully before using the device e Adult assembly is required Keep small parts away from children when assembling e his product is not a toy Do not allow children to play with it e This video monitor Is not a substitute for responsible adult supervision e Keep the cords out of reach from children e Do not cover the video monitor with a towel or blanket e Never use extension cords with power adapters e Only use the power adapters provided
2. amp Contacts Rece Skype Access Echo Sound Test Service Making a video call 8 Click the Calls button o J 9 Click the Show advanced options button Opt ABE T sop Op E a la General Call settings Set up your call options UN Privacy Allow anyone to call me D Only allow people in my Contact list to call me Notifications Show advanced options PES Calls Show advanced options M 10 Under Allow calls from select people in my Contact list only This will prevent the device from accepting Skype calls from anyone who is not in the contact list for its account hee people in my Contact list only v Answer incoming calls automatically Start my video automatically when I am in a call i em NOTE You may also select anyone which will allow anyone with a Skype account to call the device and access your camera This setting is not recommended 29 Viewing your Camera Remotely Using Skype 11 Check Answer incoming calls automatically and Start my video automatically when am in a call Click Save C anyone people in my Contact list only v Answer incoming calls automatically Start my video automatically when I am in a call Step 5 of 6 Send a contact request Next you have to send a friend request to your personal account e g Tom Smith LZ Add a contact 1 Click the Add a contact button Let Sipp lemdechnalegy Look for
3. Viewing multiple cameras Quad view You can view all of the paired cameras in Quad view The video monitor supports a maximum of four cameras NOTE Audio monitoring is not available in Quad view To view multiple cameras in Quad view e Press the SEQ Quad button twice on the video monitor To exit Quad view e Press the SEQ Quad button and then press CAM to exit Quad viewand return to single camera view SEQ Quad button O a Coco SCAN SEQ H CAM Video monitor displays 4 video images in Quad view 13 Basic Setup Using the talk function The talk function allows you to speak into the video monitor and have the camera output your voice The camera also has a built in microphone which allows the person to speak into the camera Talk and listen m Two way communication OSE Hello LW2401 camera shown To use the talk function Adjust the volume on the camera and video monitor to the desired level Press and hold the Talk button on the video monitor and begin speaking Release the Talk button when you are finished NOTE You must release the Talk button on the video monitor in order to listen to the audio from the camera NOTE The talk function does not work in Quad view Music The music feature allows the camera to play pre loaded tunes To use the tune feature e Pressthe amp lil button to begin playing a tune on the camera and video mon
4. Metal contact points are located onthe cradle and underneath the video monitor These contact points must be aligned to charge the monitor using the cradle Speaker Plays sound received from the camerals Power Port DC5V Connect the power adapter to the charging cradle Using the joystick to navigate menus The joystick allows you to navigate through the video monitor menus or control the camera angle pan tilt camera only see Pan tilt control on page 4 Menu Navigation Step 1 Press the Menu button on the video monitor Step 2 Move the joystick up down left or right to navigate through the menus Step 3 Press down on the OK button to confirm a selection or press Menu to exit menus without saving changes OK Button Video Monitor Overview Monitor display icons The video monitor displays the following icons during normal use Meaning No signal between the camera and video monitor Y Full signal between the camera and video monitor all Timer is enabled The video monitor audio is muted The camera night light is on LW2401 camera only Two way talk is enabled You can now speak into the video monitor to talk to the camera Release the Talk button on the video monitor to listen to audio from the camera An SD card is inserted in the video monitor A new file has been recorded onto the microSD card Note that this icon is yellow o The microSD card is full Note that this icon i
5. NOTE If you can see an image from a webcam that is already connected select Wireless Monitoring System from the drop down menu NOTE If the Setting up Skype wizard does not run click Tools gt Options gt Video Settings Make sure you can see video in the window Click Save to exit If the image is from an already connected webcam select Wireless Monitoring System under Select Webcam Midkexs Cling Sel ue your weber Ej eens C wie Select Wireless Monitoring Wireless Fiprstonrvg Syrer ee s rem System if necessary Video Settings i mM Stew Live video f en e Change your profit picture Viren ara cac Hang es Baitoma licasbb receive video and cle Thaw hat D have vides 5 anyone pecie in rry Contacts lat ony E peo Fi oy Lontact ect oy i OTE I nione ve button Click Continue In the next page click Add later to not include a profile picture for the camera s Skype account or click Continue and follow the instructions to add a profile picture for the camera s Skype account Click Start using Skype Viewing your Camera Remotely Using Skype Step 4 of 6 Configuring Skype 7 Click on Tools Options C59 Skype 1 lorex LER eT Skype Contacts Conversation Call view ETT Help gt lorex Pans Profile Facebook y Change Language ld Call cheaply to mobile d landline 9 gibi se Skype E Accessibility b amp Contact request Share Skype with a Friend
6. 2 QSear Enter the account name or email address for your Add Contact c ry eel personal Skype account Q Find Click Find Search Options E Send contact request 3 Next to your personal Skype account click and then click Send to send the contact request Step 6 of 6 Test the connection NOTE This step requires you to log in to Skype from a different computer or compatible mobile device 1 Login to your personal account e g Tom Smith 2 The contact request from your device s Skype account should appear in the left column under Recent Click the Skype account name for your device ace Skype P A em d v 4 earch NEN z Add Credit Kt Qe hour AT mme ee I Contacts gt 1r lorexskypetester A ca ws Call RECENT CY offlim t Contact Request Q9 History lorexskypetester wants to connect with you Hi I l d like to add you on Skype lorexskypetester Block Decline Accept Accept 3 Click Accept 4 Click the 39 Make a Voice Call button to call your camera The video call begins automatically Please allow around 15 to 25 seconds for the video connection to be established e You can also call the camera from the contact list using the button Do not use the Video Call e button NOTE Video may appear pixelated immediately after connecting It should improve within a few seconds depending on your Internet connection 36 Viewing your Camera Re
7. e Mac OS v 10 5 8 and above e 1 GHz or higher Intel processor e PowerPC not supported For instructions see Connecting to Skype on a Mac Home computer Disclaimers You must have a high speed internet connection to use the video function on Skype Traffic congestion may result in choppy video Mobile Data Charges When using a mobile cellular network data charges may apply Check with your provider for details Computer to computer For Skype related support visit https support skype com on page 32 25 Viewing your Camera Remotely Using Skype Connecting to Skype ona PC Step 1 of 6 Installing the camera driver for PC You will need to install the camera drivers located on the software CD included or avallable as a free download from www lorextechnology com To install the camera drivers 1 Insert the software CD into your computer An Autoplay window opens 2 Click Run Lorex exe G3 AutoPlay ca Xs e DVD RW Drive E Lorex Always do this for software and games Install or run program from your media Run el Runlorex exe Lo rex exe Publisher not spe fie d General options M Geale iera View more AutoPlay options in Control Panel 3 Click the USB Driver button and then click USB Driver The driver appears on your desktop Lorex Sa Va LOREX LOREX CONNECT PROTECT Wireless Video Home Monitor Click the USB Driver bu
8. Advanced Speakers Built in Output Internal Speakers Ringing Built in Output Internal Speakers Camera Wireless Monitoring System 2 Under Camera select Wireless Monitoring System if it is not already selected You will see live video from your camera If your device is connected e f the video area is black check to see if your camera is on and is paired to Channel 1 Also check to make sure your video monitor is connected to your computer NOTE When connecting or reconnecting your video monitor you must close the Preferences window and re open it to the Audio Video tab to test the video connection 3 Select the Calls tab eoo Calls 2 8 B O s d General Privacy Calls Answer Messaging Notifications Audio Video Advanced automatically Incoming Calls Receive normally l B Answer automatically Configure Click Configure JForward calls Set up Forwarding Send to voice messages Enable Voice Messaging V Show current calls when Skype is in the background M Show Skype watermark during calls Position Top Right Default Country Select Country or Region No Emergency Calls Kyi d ih ram tet 4 Under Incoming Calls select Answer Automatically 5 Click Configure 34 Viewing your Camera Remotely Using Skype 6 Select Answer automatically with video Click Done Answer automatically w
9. a room The Auto Mute feature works by muting the video monitor when the camera detects no audible noise Once the camera detects a sound the video monitor plays sound again E i re 4 f To enable Auto Mute ADT Auto Mute J L Press the Menu button on the video monitor Temporarily turn off audio when only minimal environmental noise is delected by the camera Select Auto Mute using the joystick Select ON to enable auto mute Press the OK button press down on the joystick to save your settings Configuring the Overwrite feature The Overwrite feature allows the video monitor to continuously record on the microSD card When the microSD card is full the video recordings overwrite the first recorded video entry first in first out To enable overwrite Recording Press the Menu button on the video monitor Select Record and press OK File Overwrite Select File Overwrite and press OK Select Yes to enable overwrite or select No to disable overwrite Press the OK button to save your settings Configuring your Video Monitor Changing the date and time To adjust the video monitor s date and time Press the Menu button on the video monitor Date amp Time I gs yyy NAM BN Select Settings and then press the OK YYY MM DD button 2011 02 14 Select Date amp Time and then press the OK 07 94 30 button Use the joystick to configure the Year Month
10. and Date e Press up down on the joystick to adjust the values e Press left right to move between the year month and date Press the OK button to save your changes or press Menu to exit the menu without saving your changes Adjusting the alarm volume The video monitor beeps when the camera detects audio triggers e g a loud noise or 7 we motion triggers LW2401AC2 only Youcanadjust how loud the video monitor beeps when the alarm triggers TT This is useful if you want to monitor activity in an area but cannot keep your eyes on the video monitor Alarm Volume To change the video alarm volume NOTE To disable the alarm beep turn Press the Menu button on the video monitor the volume all the way down Select Settings 9 and then press the OK button Select Alarm Volume and then press the OK button Press left and right on the joystick to adjust the alarm volume Press the OK button to save your settings 2i Configuring your Video Monitor Adjusting the screen brightness To adjust screen brightness 1 Press the Menu button on the video monitor fs a MN Brightness 2 Select Settings 9 and then press the OK button LCD Monilor Brightness Level 3 Select Brightness and then press the OK button 4 Press left and right on the joystick to adjust the screen brightness 5 Press the OK button to save your settings Adjusting the timer settings The timer allows the vi
11. camera triggers the video monitor is between 5 30 seconds The duration of the recording can be set in the Trigger menu Menu Record Audio Trigger This also applies to motion recording using the LW2401AC2 camera NOTE The maximum recording time during auto recording is 10 consecutive minutes For example if there is constant noise the video monitor will record a maximum of 10 minutes Recording Viewing recorded files on the video monitor There are two ways that you can view the recorded video files on the microSD memory card through the video monitor or on your computer NOTE Video files are saved tn avi format To view video files through the video monitor 1 Press the OK button on the video monitor press down on the joystick The File List menu opens d aN 4 Play File Recorded Files 2 Press OK to open the VIDEO folder 3 Select the desired folder and press the OK button NOTE The folders are named by the year month and date For example a folder named 110204 means that the folder was created in 2011 February 02 on the 4th vr SN d Play File Recorded Files 4 Select the video file you wish to view and press the OK button to begin playback e aV Video Playback Controls ut Play File y Recorded Files EN Rewind Wy Fast forward e Press right on the joystick repeatedly to increase playback speed 2x 4x 8x e Press left on the joystick to reduce playback sp
12. cel T b Lana dudum imm Leam how io use Skype 9 SendIM ET na M ME FIO CE m View Profile Rename YE View Old Messages r B Removefrom Contacts NOTE Video may appear pixelated immediately after connecting It should improve within a few seconds depending on your Internet connection Connecting to Skype on a Mac Step 1 of 6 Installing the camera driver for Mac OS You will need to install the camera drivers included on the software CD included Insert the software CD into your computer The Lorex CD icon i appears on your desktop Double click the Lorex CD icon vd on your desktop Double click the Mac folder Double click the SD Series Mac Driver zip file to extract the installer The installer is saved to your Downloads folder and your downloads folder opens automatically Double click the SD Series Mac Driver folder and then double click the WirelessCameraMacDriverSuitelnstaller pkg file Follow the on screen instructions to install Step 2 of 6 Connecting the video monitor or receiver to your computer Turn on your camera first and then turn on your video monitor or receiver Make sure you can see a video image on Channel 1 NOTE Pair the camera that is most important for you to view remotely to Channel 1 For instructions on how to pair cameras see Pairing cameras on page 12 Viewing your Camera Remotely Using Skype 2 Connect the mini USB cable included from the USB port on
13. disk Q Why is my picture at night time not as clear via Skype compared to my handheld monitor A Video is transmitted at a resolution of QVGA 320x240 When viewing on your computer typically the viewing screen Is larger than the handheld monitor resulting in a stretched image to fit the screen size hisis even more evident in night vision mode In Skype we recommended using pop up mode image 1 for better clarity comparedto I I default view image 2 Pop up mode Dafsultuie Q Why is the temperature sensor giving me an inaccurate reading A Older versions of the LW2401 camera have a flexible temperature sensor If itis placed too close to the camera lm heat from the camera can be cause the temperature to appear higher than the actual temperature The solution is to gently angle the sensor away from the body of the camera Newer versions of the LW2401 camera have a non flexible temperature sensor that keeps the temperature sensor away from the camera to prevent inaccurate readings Make sure to keep the camera out of direct sunlight as this may affect temperature readings NOTE The LW2401AC2 accessory camera does not have a temperature sensor When this camera is selected the monitor will always show a temperature of 68 F 20 C Frequently Asked Questions 49 Mounting Template LW2401 Camera Only el Mounting Template LW2401 Camera Only Use the mounting template to align mounting holes fo
14. e Test the video monitor before use Become familiar with its functions e o not use the video monitor near water e Do not install the video monitor near a heat source e Only insert batteries battery pack of the same type e Do not touch the plug contacts with sharp or metal objects Only use the chargers and power adapters provided Donot use other chargers or power adapters as this may damage the device and battery pack e Keep this user s guide for future reference CAUTION Risk of explosion if battery is replaced by an incorrect type e DISPOSE OF OR RECYCLE BATTERIES PROPERLY IN ACCORDANCE WITH APPLICABLE LAWS which may vary by location e Insert batteries with the correct polarity e Do not mix new and used batteries e Do not mix alkaline standard and rechargeable batteries e Remove exhausted batteries from the product e Keep all batteries away from children Using this product as a baby monitor If you intend to use this wireless video monitor as a baby monitor we advise you to take the following precautions to avoid possible injury to infants e DO NOT place baby audio and video camera monitors too close to cribs bassinets play yards and other safe sleep environments for infants e MAKE SURE to run all power adapter cords where they are unlikely to be tripped over and are out of arms reach of your infant Keep them at least 3 ft 1m away e MAKE SURE baby audio and video camera monitors are on a stable
15. footing so they cannot be easily knocked over e Use the included cable clips to keep the power cord out of reach from infants and young children NOTE These precautions are important even if your infant is not yet standing or mobile 3 ft 1m Using the Cable Clips LTS Soo Option 1 Option 2 Option 3 Thread the extra cable through Thread the extra cable through Wrapthe excess cable aroundthe the cable clip notches the cable clip notches Wrap the clip excess cable around the clip lii Table of Contents Video Monitor Overview reeeeeee rr m Ih n mn 1 Using the joystick to navigate menus llleeeleee ehh 2 Monitor display ICONS s 1 53 d uc ore dee Ode Ec AC DER ACA CR c o E i Rr RC RC 3 Camera Overvie Wu uox oae Ra ae i e CR REC SC d RC Dodo ER CH dp 4 Cameras and ACCeSSOT IBS isse dor XS 9 sot wow a Dae a a a a eae ae 4 VN Ze ETIN d asor a n ae ate hoes ate aerated eee ee Gar a NA 5 FPansrHECSImef dus orden n Soran ata eas aoe eet Ob eee awa ied hee qos 6 FO COW Tc s siat tuscspe teta cia eaten Se ered Ere n E ett Dae Me en Guanine Aviat Oh he its ap eee Ar 6 Basie SCUD 6 254 ceccaceea arte eon aa bot ee enema bed wae ee ones 7 Step LOZ Powering on TNC camera as dea iat ho e dotes ad oe OR em hee ee He be ee 7 Step 2 of 2 Powering on the video monitor 4i isse x E edo Re RoR EEE Ae UC EUR a do 7 TESUNG YOUI SCLUD 5 amp 3 pid pex buts verdqxR EPIS ER tice audiret arts 8 Positioni
16. on the video monitor or charging cradle ensure the video monitor firmly rests on the cradle The video monitor s charging LED Indicator glows red to Indicate charging Is in progress The charging LED glows green when the video monitor is fully charged NOTE It requires 6 hours to fully charge the battery Basic Setup 2 Slide the power switch to ON The video monitor will automatically scan for cameras in range Using the charging cradle 9 o o9 o oou 909000 ce 9000 eoccocoooasec 0900800 2ece0 999 9 co9 Coo Slide the power switch to the ON position DC5V port Testing your setup It is recommended that you test your camera setup before permanent installation so that you get the best picture and sound quality from your video monitor Test the camera and video monitor reception 1 Place the camera and video monitor in two different rooms 2 Have one person monitor the signal strength on the video monitor 3 If the signal strength is low have a second person move the camera to different locations in the room to find the best placement location Test the camera volume level Have a person with the video monitor press and hold the TALK button to confirm the camera volume level Have the other person adjust the volume dial on the camera as required 2 Have the person near the camera speak into it to test the sound quality on the video monitor The person holding the video monitor can determine i
17. volume can be adjusted to the desired level Scroll the Volume dial to Increase or decrease the camera volume Turning on the camera night light LW2401 camera only e Press the night light button on the top of the camera to turn the night light on or off The night light button glows when the night light is on and the monitor displays the icon to indicate the camera night light is on Video monitor setup Unlocking the video monitor antenna The video monitor has a built in antenna that improves signal range It is recommended that you extend antenna for optimal performance To unlock the monitor antenna e Slide the lock button to the right Slide the Lock button to the right to release the antenna Reading the power indicator LED The power indicator LED glows green when the monitor is powered on When the battery is low the power LED blinks Power LED Basic Setup Pairing cameras The camera included with the video monitor has already been paired up with the video monitor If for any reason your monitor and camera are not paired up or you wish to add additional cameras follow the directions below To pair a camera to the video monitor Place the camera and video monitor 12 inches apart Turn on the camera first and then the video monitor Press the Menu button on the monitor then select Pairing and press the OK button Select an available channel and press the OK butt
18. your video monitor or receiver to an available USB port on your computer USB PC CAMERA MODE appears on the screen mini USB cable Step 3 of 6 Creating a Skype account A Skype account allows you to connect to your camera through the Skype service Skype Is a service that allows users to make voice and video calls to anywhere In the world In order to connect to your video monitor using Skype you will need two accounts one for the camera e g Lorex Camera and one for yourself e g Tom Smith NOTE The Skype illustrations and instructions below serve as a guideline only Skype may change their website product interface without prior notice If you do not have an existing Skype account See If you do not have a Skype account on page 37 If you have an existing Skype account Mac You have to create a separate account for your camera Follow the instructions below 1 Launch Skype If you are already connected to Skype click File Sign Out 2 Click Create New Account Welcome to Skype Skype Nam Create New Account Create New Account 3 Follow the on screen instructions to create a new account 33 Viewing your Camera Remotely Using Skype Step 4 of 6 Configuring Skype 1 Upon login click Skype Preferences Select the Audio Video tab eoo Calls tab n IQ General Privacy Calls Messaging Notifications Audio Video Leos Audio Video tab S Ls ad Audio Video
19. ACLTCQUEST s oui vC HER O Se RR pe Rt Shots PD BAGS 30 SICO OOF OF 1 CSL te CODIBGIIOD ui etx ve chs ho e S ER Ve tolus T a RE ice ei aD Sine gto RUE d SNC Eq UR 31 Connecting to Skype ona Mac 1 ccc es 32 Step 1 of 6 Installing the camera driver for Mac OS ccc ttt hh hh 32 Step 2 of 6 Connecting the video monitor or receiver to your computer cee 32 Step a O10 Creating d OK OC ACCOUN s ui ap dic RIERURY 3 4 29 LER TR DARE rhe es Samana bia ard 3I Step 4 of 6 Configuring Skype i os ck acuario cic eR ai Gabel at Gl Seles Sete age do Ried ERO DIR URN nbs ah ci eh et 34 Step or Or Send a Contact regust co Ro Ga Ree cR ERG o ded e us DEAS t ara E dE s E E Qo EN 35 SIODODLO TOSI The CODDEGIID cu aod te aec EE ott Shag a bet eoi b eds SEO Be nd eS us 36 If you do not have a Skype account 0 cee ees 37 Changing the camera view on Skype ees 38 Viewing a camera on your mobile device cee ee 39 SUPDOMCO IPOS RQ GCVICES 1 63 ur E Sot vum es Be pnr Be md qs CE tod EAE EELS EERE eee 39 Viewing your camera on iPhone Li cc tnt nts 39 Installing Camera Batteries LW2401 Camera Only 41 Installing non rechargeable AA batteries oii cc ce nents 4 Installing a rechargeable battery pack oi ahhh nns 41 Technical Specifications 2 00 cece eee ee ee eee eee eee 42 Cleaning and disposal 4 4 ax amp CR CREE IL e ACA UR ear cR rx 43 CORNING METTE 43 WIS DOS AL Ol ICO OVO exe ee fo etal
20. Contacts You access the camera by calling it just like calling any one of your Skype contacts Q Why can t see an image from the camerals in Skype A Is this the first time you are setting up the video monitor for remote viewing If so follow the instructions in the Viewing your Camera Remotely Using Skype section of the user s guide If you have already performed the initial setup and still cannot access your camerals or the video monitor appears as Offline check the following e Is the camera you want to view paired to Channel 1 or the channel selected on the video monitor e Is the handheld monitor connected to the computer e Are the camera and handheld monitor powered on e s the computer powered on e Is the computer in Sleep mode or Hibernate mode The video monitor will not be able to connect to Skype if the computer is in Sleep or Hibernate mode e s Skype running on the computer and is the video monitor s account signed in e Have you created a Skype account for the video monitor e Have you added your personal Skype account to the video monitor s contact list e Do you have the latest version of Skype installed on your computer and or mobile device Q What Skype app dol use to connect to the video monitor on my iPhone or iPad A For the iPhone use the Skype app For the iPad use the Skype for iPad app Both apps are available for free from the App Store Q How do pair cameras A The camera in
21. Skype contacts in your address book Pen send an estan message or make a iee viden call pd jo say hil Searcn addres Bock Add a contact 2 Search for the name of your personal account e g Tom Smith and then click the Add button I9 Skype Add a contact Add a contact Search for the name of your personal Tom Smith Skype account Click Add 30 Viewing your Camera Remotely Using Skype 3 Click Send Request Kd Seppe Adda contact Send contact request Step 6 of 6 Test the connection NOTE This step requires you to log in to Skype from a different computer or compatible mobile device 1 Log in to your personal account e g Tom Smith 2 A new contact pop up appears Click the new contact request icon that appears on the bottom right corner of the window 2 This person would like to connect with Togay 08 PN LoraxCamera orexcamarat P Hi Tom Smith fd like to add you on Skype Lorex Camera Add to Contacts View Profile i Ignore J amp Block J 31 Viewing your Camera Remotely Using Skype 4 32 From the contact list right click on your camera s account name e g Lorex Camera and click Call The video call begins automatically Please allow around 15 to 25 seconds for the video connection to be established EG hype tbe dones L3 p qm Skye Coat Conversa Cal Mew Tode m uA A E G fkype Home Wf Profile E Facebook Call
22. a drivers may not be installed e Viewing on a non supported mobile device Solution e Move the camera to an area away from direct sunlight e Turn the Overwrite feature off For details see Configuring the Overwrite feature on page 20 e Press right on the joystick to change to the correct channel e Ensure the camera has power and is turned on e Launch Skype then click Tools Options Video Settings Ensure you can see the video on Skype e Ensure the handheld monitor is connected to the computer via the USB cable e Insert the driver CDandinstallthe USB driver e Connectthe video monitortoa different USB port e For instructions on how to configure Skype to Auto answer incoming calls see page 29 for PC or page 34 for Mac e Install the latest version of Skype on your mobile device e Ensure the camera drivers are installed from the CD e Ensure the device is compatible with Skype For a compatibility list visit www lorextechnology com Frequently Asked Questions Frequently Asked Questions Q have Skype Why do I need to create a Skype account for the video monitor A The video monitor requires a Skype account so you can access the camerals from your personal Skype account Setup the video monitor for Skype viewing for instructions see Viewing your Camera Remotely Using Skype in the user s guide Then create a Skype account for the video monitor and add your personal Skype account to its
23. cluded with your device has already been paired up with the handheld monitor If for any reason your monitor and camera are not paired up or you wish to add additional cameras please perform the following 1 Place the camera and video monitor 12 inches apart Turn on the camera first and then the video monitor 2 Press the Menu button on the monitor then select Pairing and press the OK button 47 Frequently Asked Questions 3 48 Select an available channel and press the OK button NOTE By default the camera included with the system Is paired to Channel 1 Press the PAIR button behind the camera LW2401 camera or on the side of the pan tilt camera within 30 seconds You should immediately see video from the camera on the video monitor NOTE You can add a maximum of four 4 wireless cameras to the handheld monitor NOTE On the pan tilt camera you will need to use a pin or thin object to press the PAIR button Q How do copy video to my computer A Remove the microSD card by using your finger nail or other thin object to release the card Insert the microSD card into the included SD card adapter and slide the notch to LOCK Insert the SD card into your computer s SD card reader If your computer does not have a built in SD card slot you will have to purchase a separate SD card reader Your computer PC or Mac should load the card like a standard drive Copy or move the files from the SD card to a location on your hard
24. connects Ss Voice Call button automatically Please allow 15 oo to 25 seconds for the call to gt 37 connect About Me Sk N lores Techneinmm NOTE Video may appear Gonder pixelated immediately ees after connecting It Country Canada should improve within a State Province City Language Englisi few seconds depending on your Internet connection 40 Installing Camera Batteries LW2401 Camera Only BEEN Installing Camera Batteries LW2401 Camera Only The camera base has a built in battery compartment where you can install rechargeable and non rechargeable batteries This can be useful if you want to temporarily monitor an area with no power outlets Installing non rechargeable AA batteries You can install regular AA Alkaline batteries non rechargeable into the camera s battery compartment To install regular AA batteries in the camera 1 Unplug the power cord from the base of the camera 2 Remove the battery cover Remove battery cover from camera base 3 Insert four AA batteries into the battery compartment and replace the battery cover Installing a rechargeable battery pack Optional rechargeable battery packs are available from www lorextechnology com part ACC2401BATT Regular rechargeable sea aga batteries cannot be charged in the camera inside the camera base base To install the rechargeable battery pack 1 Remove the battery cover and insert the rechargeable ba
25. deo monitor to beep after a set duration If the monitor is used as a baby monitor the timer can help remind you when it is time to feed the baby To enable the Timer 1 Press the Menu button on the video monitor pen 2 Select Settings and then press the OK button 3 Select Timer and then press the OK button 4 Enter the timer duration using the Joystick Press left right to navigate the values Press up down to adjust the values NOTE Timer duration is represented as Hours Minutes 5 Select ON and then press the OK button to save your settings When the timer duration ends an alarm goes off and the timer resets until it is manually disabled Timer indicator 22 Configuring your Video Monitor Adjusting the temperature unit of measurement The camera has a built in temperature sensor You can change the video monitor to display temperature in Fahrenheit F or Celsius C To change the unit of measurement fa aY i do h g LIVI j Temperatu re Display 403 Press the Menu button on the video monitor a ROA Select Settings d and press the OK button Select Temp Display and press the OK button Select either C for Celsius or F for Fahrenheit Press the OK button to save your settings Configuring the temperature alert range You can configure the video monitor to alert you through alarm beeps when the temperature goes above or belowthe set tempera
26. e eee eee eee 18 ViGWING vdeo THES ON SP esos adhe ana cule ar sig Bae SER E e xau a SEG BAe d ua 1 VIEWING VIGCOTIES Ol a MaG ues a cuida ieee E Ut ok Ronee atit dea ded uio drap e edid 19 Configuring your Video Monitor 00 cece eee eee eee 20 Enabling the Auto Mute feature 0 0 ee ee 20 Configuring the Overwrite feature 0 0 ccc es 20 Changing the date and time ees 21 Adjusting the alarm volume eeeeeee nr 21 Adjusting the screen brightness 0 0 0 cece eee 22 Adjusting the timer settings ccc eee 22 Adjusting the temperature unit of measurement 000 cece eee eens 23 Configuring the temperature alert range 0 0 cece ees 23 EPasing th Memory Card 353 eter ede EDSSDES aa beni ees 24 Restoring default settings 0 cc hh 24 Viewing your Camera Remotely Using Skype 25 HOW WOKS RP PCIE 25 System TequiFe mie iiS 252 acie de Cau kdo el rette don Roa pzoo dub MERE het d uo rb ose A e dft d 25 Connecting to Skype on a PE sores sbEPEPEISR STIS cio PDXqeeEDEU IET OS 26 Step 1 of 6 Installing the camera driver for PC oo cn hh hh 26 Step 2 of 6 Connecting the video monitor to the PC ens 2 OteD Om OF Orc FegUng s SKyDe ACCOUIN Bak uos 43 Ru t hn BRU C BE ede Bt Gia aS Bye BE Don BR Eo OR ee 2 Epa OF CODO IU SHV OC a va hb hdd itas dt tac do a dn Se Re a ERR ea m EE a ees dite 29 Step Iolo Seno a CONIT
27. eed 2x Ax 8x Recording Viewing video files on a PC Remove the memory card C Cc Co D TER Push the microSD t X MUSIC card to eject Insert the microSD card into a memory card reader not included NOTE If required use the included SD card adapter to convert the microSD card to SD HCSD memory card format When the AutoPlay menu appears click on Open folder to view files AutoPlay 2 x Removable Disk I General options Open folder to view files using Windows Explorer ex Speed up my system using Windows ReadyBoost Set AutoPlay defaults in Control Panel Double click the VIDEO folder then select the sub folder you want to open NOTE The folders are named by the year month and date For example a folder named 110204 means that the folder was created in 2011 February 02 on the 4th Double click the desired video file to begin playback Viewing video files on a Mac Insert the microSD card into a memory card reader If required use the included SD card adapter The memory card automatically appears on the desktop Double click the USB icon on your desktop to view the microSD contents Double click the VIDEO folder then select the sub folder you want to open Configuring your Video Monitor Configuring your Video Monitor 20 Enabling the Auto Mute feature The Auto Mute feature eliminates white noise when monitoring
28. f the camera needs to move to a different location in the room for better sound clarity C2 O N ao OF A Basic Setup Positioning wall mounting your camera e Keep cables and wires at least 3 feet 1 meter away from infants or young children e Use the cable clips to keep the power cords out of reach from young children and infants e Determine the camera position that will give you the best view before permanently mounting the camera Ensure the power cable is long enough to power the camera eo ts Use the cable clips to secure and manage the cables You canwrap the excess cable around the security clip to reduce the cable length To wall mount your camera LW2401 camera only Mark the screw holes using the template on page 50 Drill the holes tn the wall Insert the screw anchors included into the hole Lightly tap the anchor into the hole with the hammer until the anchor ts flush with the wall Tighten the screw into the anchor leaving 1 4 of the screw exposed Rotate the base of the camera as shown in Adjusting camera view on page 10 Slide the back of the camera onto the screws and pull down to secure the camera in place Connect the power adapter to the camera Use the cable clips to keep the cables out of reach from infants and young children An optional wall mount accessory is available for the pan tilt camera from www lorextechnology com accessory ACCMNT2451 For wall ceiling mounting in
29. ible for any radio or TV interference caused by unauthorized modifications to this equipment Such modifications could void the user s authority to operate the equipment However it is imperative that the user follows the guidelines in this manual to avoid improper usage which may result in damage to the unit electrical shock and fire hazard injury In order to improve the feature functions and quality of this product the Specifications are subject to change without notice from time to time Caution o maintain compliance with the FCC s RF exposure guidelines place the camera at least 20cm 7 87in from nearby persons IC notice This device complies with Industry Canada license exempt RSS standard s Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of the device Le pr sent appareil est conforme aux CNR d Industrie Canada applicables aux appareils radio exempts de licence L exploitation est autoris e aux deux conditions suivantes 1 l appareil ne doit pas produire de brouillage et 2 l utilisateur de l appareil doit accepter tout brouillage radio lectrique subi m me si le brouillage est susceptible d en compromettre le fonctionnement The Lorex Live Handheld Video Monitor models LW2401 and LW241 are in compliance with the essential requirements and other relevant provisi
30. ing into the video monitor vision Power Port DC5V Connect the power adaptertothe Power Port Volume Dial Sensitivity Dial Adjust the audio level that will trigger an alert on the video monitor Adjusts the speaker volume Pan tilt control NOTE You must be in full screen view to adjust the angle If the monitor is in Quad view i e showing multiple cameras press SEQ and then CAM to return to full screen view If the monitor is in Sequence view i e switching between cameras press CAM to exit Sequence view Select the channel the pan Lure TIUP Pan Left Right tilt camera is connected to 6 Ensure you are In full screen view Pan LEFT C34 Mw Use the joystick on the video n3 monitor to control the camera Tilt DOWN Basic Setup Basic Setup Step 1 of 2 Powering on the camera 1 Connect the power adapter to the DC5V port on the camera Connect the other end to a power outlet 2 Slide the power switch to the ON position LW2401 camera E it J V E Aaya EN EN Qe 592 ot 4 H Slide the power MAP t switch to the ON F 7 a position r Is E d OPTIONAL LW2401 camera only To install batteries in the camera see Installing Camera Batteries LW2401 Camera Only on page 41 Pan tilt camera Sis Slide the power switch to the ON position Step 2 of 2 Powering on the video monitor 1 Connect the power adapter to a power outlet and to the DC5V port
31. ing the video monitor joystick e Wall mount available e AC power only For instructions see Pan Tilt Camera on page 6 Rechargeable Battery for LW2401AC1 Camera Accessory ACC2401BATT LW2401AC2 Indoor Outdoor Camera Accessory LW2401AC2 e Wall ceiling mountable e Motion detector for motion recording alarms e No volume control audio alarms or alarm sensitivity control e No temperature sensor e AC power only For installation instructions see the LW2401AC2 Quick Start Guide Wall Mount for LW2451AC1 Camera Accessory fft ACCMNT2451 For instructions on installing batteries see Installing Camera Batteries LW2401 Camera Only on page 41 Motion detector uses Auto Record feature for motion recording For details see Auto recording on page 17 When selected temperature reading on monitor is permanently set to 68 F 20 C Appearance may not be exactly as shown 4 LW2401 Camera Infrared LEDS Infrared IR LEDs that allow you to see in the dark Speaker The speaker allows you to hear the person speaking into the video monitor Microphone Me ee IR Light Sensor Detects the level of light in the room to trigger night vision b Sensitivity Dial Adjust the audio level that will trigger an alert on the video monitor Volume Dial Battery Charging Indicator Glows to indicate battery is charging This requi
32. is required to enable recording This system is capable of recording video on a microSD card Use the table below to help you estimate recording times on various sizes of microSD cards as oigo DEOIR With movement With limited movement Capacity e g drive by cars e g empty room 512 MB 1 hour and 50 minutes 1 hour and 45 minutes 2 hours and 50 minutes 2GB 3 hours and 50 minutes 5 hours and 50 minutes NOTE Estimated recording times based on tests using Kingston brand microSD cards There may be a slight variation when using different brands of memory A scene with more activity requires more storage space Manual recording amp auto recording Prerequisite e Insert a microSD card into the microSD slot in the video monitor NOTE The video monitor supports microSD cards up to 32 GB gigabytes gt i ON b OFF M sic N a mae di microSD icon 9 Orient the microSD card as shown and insert itinto the microSD slot Recording Manual recording Manual recording allows you to record video by pressing the record button on the video monitor Manual recording may be useful If you want to quickly record an event to your video monitor while you are watching It NOTE It is recommended to set the date and time before using the recording function For details on setting the date and time see Changing the date and time on page 21 To start manual recording Press the M button
33. ith video Select Answer automatically with video Answer automatically without videa 7 Select the Privacy tab 8 Under Allow calls from select Contacts This will prevent the device from accepting Skype calls from anyone who is not in the contact list for its account e Privacy go S mjo Ad Genera Privacy Calls Messaoing Notificctions Audio Video Advanced Privacy tab Show my picture to Contacts gt Allow calls from Contacts Allow calls Receive calls to my Online Number from Anyone ad from Contacts Allow video and screen sharing from Contacts Allow messages from Contacts Save conversation history Forever Delete History NOTE You may also select Anyone which will allow anyone with a Skype account to call the device and access your camera This setting is not recommended 9 Close the Preferences window to return to the main Skype window Step 5 of 6 Send a contact request Next you have to send a friend request to your personal Skype account e g Tom Smith 1 From the main Skype window click Contacts then click Add Contact 8 Er Q Search Add Contact Add Contact Q Q n Skype test call 35 Viewing your Camera Remotely Using Skype 2 Under Add Contact enter the Skype account name e g Tom Smith or email address for your personal Skype account Click Find Your personal Skype account should appear below the search bar Skype
34. itor e Pressthe amp Iil button againtostopthe tune e Press the Pl button to skip to the next tune hesongtitle appears on screen NOTE Music is not available in Quad view Basic Setup Using Scan mode Scan mode temporarily turns off the video monitor and waits for a camera to detect a noise Once one of the cameras detect sounds the video monitor automatically turns on and beeps to notify you This feature is especially useful if you have multiple cameras and only want to view the camera that detects a sound e g infant crying To enable Scan mode e Press the Scan button To disable the Scan mode e Press the Scan button to turn off Scan mode O aac SCAN SEQ FH CAM Scan button NOTE The first camera to detect a sound will trigger the video monitor to turn on After several seconds the monitor turns off and begins monitoring the cameras again Turning the video monitor screen on off Turning off the video monitor screen allows you to listen to audio from the camera while the video monitor screen is off For example if you want to monitor a baby s room at night while you sleep you can turn off the video monitor screen to conserve power and at the same time listen to the camera audio To turn the video monitor screen on off e Press the Video button to turn the screen off e Press the Video button again to turn the screen on Video button Recording Recording NOTE A microSD card
35. motely Using Skype If you do not have a Skype account Create your personal account first e g Tom Smith then create a second account for your camera e g Lorex Camera Create a personal account i e Tom Smith Go to www skype com and click on Join Skype Free Soype calla and cheap calli 8c phor Spr inbernet Explorer presesdiod bx Diri gt gt 11 tpn tavern ale gee orm nl te a Puer F ia a Join Skype Skype Subscriptions The cheapest way to cal phones 7 Off ET tr ahi Create an account or sign in LS ral Pout BEisnda fot Pes W of abba fimi te eed Then your Be redet youre domnioaded and ingia d Skype Create Account Agree Continue Follow the on screen instructions to download and install Skype on your computer Once you are logged in to Skype click on Skype Sign out PC or File gt Sign out Mac then see If you have an existing Skype account PC on page 27 or see If you have an existing Skype account Mac on page 33 37 Viewing your Camera Remotely Using Skype My Skype Account Information Personal Skype account Camera Skype account e g Tom Smith e g Lorex Camera Skype Name Skype Name Password Password Email address used to register this Email address used to register this account used for account retrieval account used for account retrieval Changing the camera view on Skype NOTE This section is applicable only if you ha
36. ng wall mounting your camera ssee eee es 9 Aajusurig cateba VICW ossosa gen p wel Eaton os etr o Ebo do Rue sedeo had dodenus deed 10 Camera SQ CUD Rr 10 Adjusting the camera sensitivity 5 4a om Be ena co oe RERO ad EERE tlla eee beeen 10 Adjusting the camera volume iae 3a ad o re aie Dp dete Bob nyt Le A ad Se RE heu 17 Turning on the camera night light LW2401 camera only oct hh 11 Video MONITO SCLUD 2 22 23 8 2 29 230395 71 Sox Xn uem eke eee soe do eae B Barbs 11 Unlocking the video monitor antenna s sa ao re ee a ERR tutu ae Be oa leo rc de BOR COUR Ae Been ase 11 Reading the power indicator LED isa artus uad etter ne Ru A E T E EEE a 11 Pairing Cameras iced chins renidi aa a e a aa set s rE 12 SEdUENCE VIGW codd a un nea e a aa ee ak aces Ora o aa 13 Viewing multiple cameras Quad view 0 0 cece eee eee eee eet I 13 Using the talk function cu oceans Sette Oates Uwe wate dew Rie ee S ea ee 14 MUSIC 2 2 da durae toa ane an eat ae ek wick dud aiu ad ee eae ae Bean 14 Turning the video monitor screen on off cece ee eee eee eee eee 15 RECO GUNG usce aren cures aon ett eet wae Re me naw N ere anne mane 16 Manual recording amp auto recording 0 00 c eee eee 16 MODUS T COON QING ee acte artes icto ow me eeu toy ae ge he aba hin ie Peel wet a bed ye oH 17 Aulo LO COMING ERR ties Oty Bian Sa dey at eG ety le Sean itn lena a OR bat dea 17 Viewing recorded files on the video monitor 000
37. nh a ea Ei d ean dios ts fus dC gn he Comis 4g NOLICBS d 2 ol eb da OE PUE Oo a Ae AE ACT d CHE eee a es 44 PCC MOUCC uxo Geen ast OR banana cea aay ae Barn ee ee eae ee 44 Ole oe eee ee ee ee ee eee ee ee eee 44 TFOUDLESNOOUNG su so EA CHA RC ere ee Cease ee aoa eas 45 FFOUDICSNOOLING CONTIAUCG 5s deer CER doa oe ace Rd poe ee hae ERA e OE CEG 46 Frequently Asked Questions 0 cece eee eee 47 Mounting Template LW2401 Camera Only eeeeee 50 VI Video Monitor Overview Antenna Unlock Switch Slide the switch to release the receiver antenna Menu Button options Press Menu again to exit AUTO LED Glows blue when auto record is enabled Blinks when monitor is in Scan mode Audio Level Indicator Displays the level of sound detected by the camera Auto Record Button Press to enable auto recording Press to access the monitor ENSE 2m Video Monitor Overview Manual Record Button Press to start manual recording Video Button Press the Video button to turn off the screen The speaker will remain on Joystick Use to navigate monitor menus Press down on the joystick to confirm a selection Use to control the pan tilt camera Volume Control Press to control the volume level Talk Button Hold the talk button to enable two way audio between the video monitor and camera Power LED Glows green to indicate unit is powered on Blinks when the bat
38. on NOTE By default the camera included with the system is paired to channel 1 Press the PAIR button on the camera within 30 seconds Pan tilt camera Use a pin paper clip or another thin object to press the PAIR button e You should immediately see videofromthe camera on the video monitor OPTIONAL To pair multiple cameras repeat steps 2 4 selecting a different channel in the pairing menu NOTE You can add a maximum of four 4 wireless cameras to the video monitor Add on cameras are available from www lorextechnology com accessory LW2401AC1 LW2451AC1 LW2401AC2 LW2401 Camera Pair Button Press the Pair button during the pairing process with the video monitor Pan tilt Camera Pair Button Press the Pair button with a pin or thin object f s 3 ANN t Pairing C Pair camera to selected channel 9 Channel 2 J Basic Setup Sequence view In Sequence view the monitor switches between paired cameras every six seconds For example the monitor displays channel 1 for six seconds then channel 2 for six seconds and so on The monitor only switches to channels that are paired with a camera To enable Sequence view e Press the SEQ Quad button once to enter Sequence view To exit Sequence view e Press the CAM button How Sequence View works e o amp e Camera 2 t SEQ Quad button e amp e Camera 3 a e
39. on top of the video monitor The REC icon followed by the file name e g 113711 1 AVI appears on the screen to indicate recording is in progress ceu gt Press the M button again to stop recording The yellow file icon i appears to indicate a new recording Is ready for viewing Auto recording Auto Recording allows the video monitor to record only when the camera detects a sound or motion LW2401AC2 only For example if you are monitoring a sleeping baby the video monitor will not record until the baby cries ensure you set the appropriate sensitivity level e LW2401AC2 Only Auto Recording is triggered by the built in motion detector in the camera The camera does not support audio alarms or audio triggered recording Prerequisites e Adjust the sensitivity level on the camera to the desired level Higher sensitivity means the camera will be more sensitive to noise This means that the slightest sound will cause the video monitor to record There is no sensitivity control on the LW2401AC2 camera To enable Auto Recording e Press the A button on top of the video monitor The AUTO LED glows blue When a camera detects a sound or motion LW2401AC2 only the video monitor begins to record The REC icon followed by the file name i e 113711 1 AVI appears on screen to indicate a new recording The yellow file icon appears to indicate a new recording is ready for viewing EL dae am NOTE The recording time after a
40. ons of Directive 1999 5 EC Troubleshooting Troubleshooting Problem Possible Causes No picture or sound on the Monitor e The monitor may be off e The batteries on the camera or video monitor may be low e The batteries may be installed backwards e The monitor may be in Scan mode e The video monitor and camera are too close together e The video monitor volume may be too loud Monitor produces a high pitched noise squealing e The volume on the video monitor may be too low e The Auto Mute feature may be enabled Picture but no sound on the monitor e Ensure that both the camera and monitor are turned on e Ensure that both the camera and monitor are plugged in and fully charged e Double check that you have not inserted the rechargeable battery backwards e Pressthe scan button to turn off Scan mode e Move the camera and video monitor further apart e ower the video monitor volume e Turn up the volume on the video monitor e n the Main Menu select Auto Mute then turn the setting off Sound but no picture e The video monitor screen e Press the Video button on the video on monitor may be off monitor to turn the screen back on get a Out of Range e he video monitor lost message on the moni tor e The camera may be off e LW2401 only The camera may be out of batteries e he video monitor and camera may have a weak signal e Interference from the environment f
41. r your camera 50 VIEW YOUR WORLD LIVE LW2401 LW2450 LW2451 Version 5 0 www lorextechnology com Copyright 2012 Lorex Technology Inc
42. res a rechargeable battery pack For details see Installing Camera Batteries LW2401 Camera Only on page 41 Turns the camera on and off Power LED Glows to indicate camera is on Blinks when battery is low Adjusts the speaker volume Camera Overview Night Light Button Press to activate the camera s night light f Temperature Sensor Detects the room s ambient temperature Power Port DC5V Connect the power adaptertothe Power Port Avoid placing the camera in direct sunlight as this will cause the temperature sensor to detect the wrong temperature Power Switch Pair Button Press the Pair button during the pairing process with the video monitor Camera Overview Pan Tilt Camera Infrared LEDS i Infrared IR LEDs that allow ____y _ you to see in the dark Temperature Sensor Detects the room s ambient _ temperature Avoid placing the camera in direct sunlight as this will cause the temperature sensor to detect the wrong Microphone Power Switch temperature Turns the camera on and off Power LED m uo Button P Usea in or thin object to Glows when the camera is on p J press the Pair button Dee during the pairing process with the video monitor Speaker Light Sensor Detects the level of light in 7 O the room to trigger night The speaker allows you to hear the person speak
43. rom microwaves wireless routers etc e Brightness on the video monitor may be too low Picture is not clear The video monitor does not turn on e he video monitor may have low batteries connection with the camera e Move the video monitor and camera closer together e Ensure the cameras are turned on e LW2401 only Install fresh camera batteries e Move monitor closer to the camera e Move the monitor away from other wireless devices e g wireless routers cordless phones walkie talkies etc e Adjust the brightness on the video monitor e Connect a power adapter to the video monitor and a power outlet to charge the monitor Charge the monitor for 4 5 hours 45 Troubleshooting 46 Troubleshooting continued Problem Incorrecttemperature reading Missing recorded video files I m connected to Skype but don t see any video can t see video on my mobile device Possible Causes e The camera may be under direct sunlight e Temperature sensor Is accurate within 3 F 1 C e Temperature setting on LW2401AC2 accessory camerais permanently setto 68 F 20 C e The Overwrite feature may be turned on e The video monitor may be on the wrong channel e The camerals may be off e Handheld monitor may not be connected to computer e USB drivers may not be installed e USB port may be broken e Auto answer may not be enabled e Outdated version of Skype e Camer
44. rong sunlight e Every effort has been made to ensure high standards of reliability for your video monitor However if something does go wrong please do nottryto repairit yourself Contact Customer Service for assistance Disposal of the device At the end of the product lifecycle you should not dispose of this product with normal household waste but take the product to a collection point for the recycling of electrical and electronic equipment The symbol on the product user s guide and or box indicates this Some of the product materials can be re used if you take them to a recycling point By reusing some parts or raw materials from used products you make an important contribution to the protection of the environment Please contact your local authorities in case you need more information on the collection points in your area Dispose of the battery pack in an environmentally friendly manner according to your local regulations 43 Notices Notices 44 Warning Any changes or modifications not expressly approved by the grantee of this device could void the user s authority to operate the device FCC notice This device complies with Part 15 subpart C of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received Including interference that may cause undesired operation The manufacturer is not respons
45. s been added to the contact list for the video monitor s Skype account e Ensure the video monitor is connected to your computer with the USB cable Viewing your camera on iPhone Download and install the Skype application from the App Store NOTE Skype is a free application but it requires a valid iTunes account to download Launch Skype and sign in using your personal account Your contact list opens to All Contacts If a different contact list is open tap Contacts and then tap All Contacts Select the video monitor s account and tap Voice Call to connect to the camera The e v video call connects automatically Please allow 15 to 25 seconds for the call to connect NOTE Video may appear pixelated immediately after connecting It Status f Online should improve within a few seconds depending on your Internet CIA SS voice Cati button connection Camp View Full Profile 39 Viewing your Camera Remotely Using Skype Viewing your camera on iPad 1 Download and install the Skype for iPad application from the App Store NOTE Skype for iPad isa free application but it requires a valid iTunes account to download 2 Launch Skype and sign in using your personal account Your contact list opens to All Contacts If a different contact list is open tap Lists and then tap All Contacts 3 Select the video monitor s account and tap Voice Call to Bj lorex technology connect to the camera The video call
46. s red CAM1 Indicates what channel the video monitor is on REC Indicates that the video monitor is recording video The file name appears beside the REC icon Overwrite is enabled This means the video monitor will overwrite old video files once the card is full For details see Configuring the Overwrite feature on page 20 Charge The video monitor battery is low Battery Charge The camera batteries are low LW2401 camera only Camera For details on installing batteries in the camera see Installing Camera Batteries LW2401 Camera Only on page 41 OUT OF The camera is out of range Move the camera closer RANGE to the video monitor Camera Overview Camera Overview Cameras and Accessories The camera included with your system differs depending on the model number of your device The cameras and accessories shown below are all compatible with the video monitor system and are available from www lorextechnology com The video monitor supports up to 4 cameras and can support a mix of pan tilt regular and indoor outdoor Cameras LW2401AC1 Camera Accessory LW2401AC1 e Wall mountable e Includes night light e Takes AA batteries optional not included or rechargeable battery pack optional not included For instructions see LW2401 Camera on page 5 Charging Cradle for Video Monitor Accessory ACC241CRDL LW2451AC1 Pan Tilt Camera Accessory ft LW2451AC1 e Adjustable pan tilt us
47. structions for LW2401AC2 see the LW2401AC2 Quick Start Guide Basic Setup Adjusting camera view Adjust the camera to achieve the optimal viewing position LW2401 Camera Table top adjustment Wall mount Adjustment Step 1 Rotate Camera Step 2 Fold camera base Rotate the camera to the Fold the camera base towards right the back of the camera fie Wa D IN a We i WE UE es l M h a i NS Pan tilt camera Use the pan tilt controls to adjust the camera view For instructions see Pan tilt control on page 6 Camera setup LW2401 Camera Pan tilt Camera Night Light Button LW2401 Camera Only En Press the Night Light s button to turn the camera he ua night light on or off kK j c l a Adjust the audio sensitivity 3 Adjust the audio level that will n trigger an alert on the video monitor dE Ln 3 AT gt iF Adjust the camera volume J Adjust the speaker volume o Ji I Adjusting the camera sensitivity The camera s Sensitivity dial allows you to adjust the microphone sensitivity Level for triggering an alert on the video monitor Basic Setup To adjust the camera s sensitivity level e Scroll the Sensitivity dial to increase camera sensitivity i e softer noises trigger the camera or reduce sensitivity i e louder noises trigger the camera Adjusting the camera volume The camera s speaker
48. tery is low y Microphone Allows you to speak to the Charging Cradle person on the camera side Charges the video monitor s when you press the Talk battery button i ON OFF Switch m Slide the power switch to the ON position to turn the video monitor on UID On Off Music Buttons Pressthe m button onceto begin playing a tune Press the m button again to stop the tune Pressthe mM buttontoskipto the next tune microSD Card Slot N Insert a microSD card to record video NOTE microSD card and adapter are optional Check the contents on your ae RER N product package Video Monitor Overview Sequence Quad Button Press the Sequence Quad button to view video in Quad view 4 screen split view or in Sequence view Cam Button Press the Cam button to manually switch between channels 1 4 Scan Button Turns off the video monitor and waits for a camera to detecta sound When sound is detected the video monitor turns back on Power Port Connect the power adapter into the power portto charge the video monitor without the cradle Mini USB Connect a mini USB cable included betweenthevideo monitor and a computer to view video remotely using Skype setup required Charging LED Indicator Glows red to Indicate video y monitor is charging SET Meme ee ee Glows green to indicate video monitor is finished MM charging Charging Terminals
49. to connect to your video monitor using Skype you will need two accounts one for the camera e g Lorex Camera and one for yourself e g Tom Smith NOTE The Skype illustrations and instructions below serve as a guideline only Skype may change their website product interface without prior notice If you do not have a Skype account See If you do not have a Skype account on page 37 If you have an existing Skype account PC You will have to create a separate account for your camera Follow the instructions below Launch Skype If you are connected to Skype click Skype Sign Out From the Skype Login window click Create a new account ES Click Create a new account 27 Viewing your Camera Remotely Using Skype 3 28 Follow the on screen Instructions to create a new account Upon login the Setting up Skype wizard starts Click Continue Under Video you will see an image from the camera If no image appears make sure the monitor is connected to the computer via the USB cable E inne ji x Setting up Skype Check your sound and video e Speakers can you haar the tasi sound iu Video can you see yoursel Speakers igh De nton Aude De ace Select Wireless Monitoring aem System if necessary d Microphone can your voce be heard Live video Digital Aude SPDIF High einigen Aude Device a m a a SY a a Ato aiy ala ma icm one Continue
50. ton on the video monitor een Select Settings OK button and then press the Select Factory Reset and then press the OK button Select Yes and then press the OK button Format Memory 5 49 all stored files will be deleted fr t Factory Reset Restore Factory Detaull settings Viewing your Camera Remotely Using Skype Viewing your Camera Remotely Using Skype Connecting to your video monitor through Skype is a convenient and free method to view your camera from anywhere with an internet connection NOTE When remotely connecting to your video monitor using Skype recording audio monitoring and pan tilt controls are disabled How it works Your computer connects to the Skype server The Skype server is connected to your home computer Your home computer connects to the video monitor which captures video from the camera Skype server System requirements iPhone iPad iPod Touch Requirements e Skype for iPhone v 3 0 and above e Skype for Padv 3 5 and above e iPhone 4S 4 3GS iPad 1st generation and above iPod touch 3rd generation and above e 10S 4 0 and above For the latest device compatibility list visit www lorextechnology com PC requirements e Skype for Windows v 4 2 and above e Windows XP SP2 Vista Windows 7 e Ghz or greater processor For instructions see Connecting to Skype on a PC on page 26 Mac requirements e Skype for Mac OS v 5 3 and above
51. ttery pack in the battery compartment Replace the battery cover This side faces up 2 Plug the power adapter into a power outlet Connect the end of the power adapter into the camera base Allow the camera to charge for 6 hours Ka TTT SS NOTE The Charge LED indicator glows to indicate the battery is 1 En charging E eae UR d Connect the n power adapter to 35 the DC5V port 41 Technical Specifications Technical Specifications LW2401 Camera Specifications Battery Voltage 4xAA alkaline battery not included or 3 7V Li Polymer battery not included Battery Life Up to 4 hours Up to 2 5 hours with night vision on Requires optional batteries Dimensions 3 3in x 2 6in x 6in 84mm x 67mm x 158mm Weight 0 3 lbs 0 14 kg Pan Tilt Camera Specifications Frequency 2400 2483 5Mhz Weight 0 4lbs 0 19 kg Maximum Range 450 ft 138m outdoor 150 ft 46m indoor line of sight Video Monitor Specifications 42 Cleaning and disposal FLL Cleaning and disposal Cleaning Clean the monitor and camera with a slightly damp cloth or an anti static cloth Never use cleaning agents or abrasive solvents e Do not clean any part of the product with cleaners with thinners or other solvents and chemicals This may cause permanent damage to the product which is not covered by the Warranty When necessary clean it with a damp cloth e Keep your camera and monitor away from hot humid pr wet areas or st
52. tton USB DRIVER r my JJ USB Driver UssDiver Then click USB Driver to copy NOTE Click to SAVE the the driver to your desktop USB Driver exe software to your computer s desktop and m P double click the saved file with your mouse to install ee the driver 3 Warranty Registra H ATTENTION INSTALL THE DRIVER FORE CONNECTING THE HANDHELD f z MONITOR TO YOUR COMPUTER Buy Accessories LIC 4 Click the pee Sel button to close the window 5 Double click the Usbdriver PC E icon on your desktop 6 Follow the on screen instructions to complete the driver installation 26 Viewing your Camera Remotely Using Skype Step 2 of 6 Connecting the video monitor to the PC Turn on the camera first then the video monitor Make sure you can see a video image on channel 1 NOTE Pair the camera that is most important for you to view remotely to Channel 1 For instructions on how to pair cameras see Pairing cameras on page 12 Connect the mini USB cable included to your video monitor and into the computer s USB port The video monitor displays the following USB PC CAMERA MODE SCAN SEQ EH CAM mini USB cable Step 3 of 6 Creating a Skype account A Skype account allows you to connect to your camera through the Skype service Skype is a service that allows users to make voice calls and video calls to anywhere in the world In order
53. ture range NOTE Eu n sensor Is accurate within py Temperature Alert 3 F T C NOTE The LW2401AC2 accessory camera does Alert Range nothaveatemperature sensor Whenthis camera Is selected the temperature reading is permanently set to 68 F 20 C High Temperature Low Tempe rature To configure the temperature alert range Press the Menu button on the video monitor mcum 4 TON Select Settings 4 and then press the OK button Select Temp Alert and then press the OK button Using the Joystick press up down to change selection left right to adjust the values e Beside Low Temperature enter the lowest room temperature threshold e Beside High Temperature enter the highest room temperature threshold Select the ON button and then press OK 23 Configuring your Video Monitor 24 Erasing the memory card Once you erase the memory card the video will be deleted permanently To erase the memory card Press the Menu button on the video monitor z a Select Settings OK button and then press the Select Format memory and then press the OK button Select Yes and then press the OK button to erase the memory card e he message Format OK appears to confirm that the card has been erased Restoring default settings Restoring your video monitor settings returns any setting changes to factory default settings To restore the video monitor factory defaults Press the Menu but
54. ve more than 1 camera You cannot change the camera or control the camera angle on the pan tilt camera remotely using Skype however you can change the channel manually using the video monitor Pair the camera that is most important for you to view remotely to Channel 1 When you connect the USB cable to the video monitor the video monitor defaults to Camera 1 even if you have a different channel selected To change the camera view e From your video monitor press CAM to change cameras e The camera number changes to the next connected camera Camera number Cam 2 USB PC CAMERA MODE C SCAN SEQ FE CAM Press CAM to change cameras NOTE You can only view one camera at a time 38 Viewing your Camera Remotely Using Skype Viewing a camera on your mobile device You can remotely monitor your camera using Skype on supported mobile devices Supported apps amp devices e Skype for iPhone v 3 0 and above e Skype for Padv 3 5 and above e iPhone 4S 4 3GS iPad 1st generation and above iPod touch 3rd generation and above e iOS 4 0 and above For the latest device compatibility list visit www lorextechnology com Prerequisites e Install and configure the PC Mac Skype software and USB drivers For details see Viewing your Camera Remotely Using Skype on page 25 e Ensure you configure your camera s Skype account to auto accept incoming calls e Ensure your personal Skype account ha

Download Pdf Manuals

Related Search

Related Contents

SITOP DC-USV.book  Monoboy User Manual    Supermicro C7P67  GP380 Une radio, des possibilités illimitées.  mode d`emploi hl20 h40 2015  Samsung Monitor FHD de 22 inchi elegant cu ramă roşie Manual de utilizare  Proximity Access Controller  

Copyright © All rights reserved. Failed to retrieve file