Home

AirJam Basketball Set (INS-P-10402B).pub

image

Contents

1. AirJam Basketball Set User s Manual A WARNING Read these materials prior to assembling and using this basketball set DO NOT allow more than one DO NOT attempt or allow person on the trampoline DO somersaults Landing on the NOT allow more than one head or neck can cause serious person inside the trampoline injury paralysis or death even enclosure Use by more than when landing in the middle of the one person at the same time bed can result in serious injury Use trampoline only with mature knowledgeable supervision VSS eet VV DO NOT attempt to jump over the barrier K WM Win we DO NOT intentionally rebound off the barrier DO NOT hang from kick cut or climb on the barrier Retain address information for future use JumpSport Inc 2055 South 7th Street Suite A San Jose CA 95112 U S A 408 213 2551 www jumpsport com P N INS P 10402B Copyright Notice This material is protected by the United States copyright laws and is proprietary to JumpSport Inc Disclosure reproduction translation modification or use of this document by anyone other than authorized employees authorized users or licensees of JumpSport without the prior written consent of JumpSport Inc is prohibited The information in this document is subject to change without notice JumpSport Inc shall not be liable for any damages resulting from technical errors or omission
2. and basketball set only with mature knowledgeable supervision Overhead Clearance Adequate overhead clearance is essential A minimum of 24 feet from ground level is recommended Provide clearance for wires tree limbs and other possible hazards Lateral Clearance Lateral clearance is essential Place the basketball set away from walls structures fences and other play areas Maintain a clear space on all sides of the trampoline and trampoline enclosure Level Surface Place the trampoline and trampoline enclosure on a level surface before installing and using the basketball set Lighting Use the basketball set in a well lighted area Artificial illumination may be required for indoor or shady areas Security Secure the trampoline and trampoline enclosure against unauthorized and unsupervised use Underneath Clearance Remove any obstructions from beneath the trampoline and trampoline enclosure Note The trampoline enclosure is only to be used as an enclosure for a trampoline and the trampoline must be of the appropriate size as covered by the specific enclosure Note The owner and supervisors of the trampoline are responsible to make all users aware of practices specified in the Use Instructions Do not install the basketball set on a pole that is near or over a missing or damaged frame pad Assembly and Installation Instructions Installation of the AirJam Basketball Set requires a 13mm hex wrench a 14mm hex wrench a 17mm hex wre
3. 11 Rengia after completing the installation Ref 4 Ref 13 S Ref 14 o 9 Ref 5 Ref 15 am o S Ref 17 2 Ref 16 0 Oy o Ref 6 S Ref 19 T iN z Ref 18 D eo Ref 20 Commi o o Ref 21 40 RT LARRY W Ref 23 Ref 24 30 WX Ny X Ref 8 NIKOS RU V Y AAA wy Ref 22 D 4 10mm 20 ee DOD DOD OOOOJODOI DOKO ODOO OOOE OOKE OOOOJOOOO DOK LULL LLL OO LLL LLL CEL LLL Loo DOD Loo 70 Ref 9 DI NH Bolt ruler shown to Ref 10 D scale Assembly and Installation Instructions Before you begin installing your AirJam Basketball Set please check to see what kind of ball end cap you have installed at the top of your safety enclosure poles Ball end cap with notch Ball end cap with eyebolt on top no eyebolt no notch iter Oc MATS 496 Seks NOC x Type A assembly Type B assembly instructions begin on instructions begin on page 7 page 10 ALK Xi VSIA Assembly and Installation Instructions Picture A S VC ON Type A Assembly Note Use pages 4 amp 5 to help with part names and numbers Not all parts will be used for this installation End of hoop is pointing down Tab of hoop S2 Las V 1 Orient hoop so that end of tab pointing down 2 Detach Velcro connect
4. Picture B A o A M10 standard nuts Ref 17 O 6 6 lt Back of backboard M10 washers Ref 16 Sg ga M10 x 95mm bolts SO Ref 14 as 5 Mount hoop assembly onto front of the backboard using four M10 x 95mm bolts as shown Place flat back plate onto back of backboard over ends of the four M10 x 95mm bolts Place an M10 washer over each of the bolt ends then tighten an M10 standard nut onto each of the bolts End of eyebolt flush with end Eyebolt cap of hex nut with nylon insert Eyebolt Short spring with thin wire Ref 10 6 Important Basketball Set should be installed on a pole directly opposite the entrance to the safety enclosure Remove ball end cap from pole Reinstall eyebolt and Nylock nut placing short spring with thin wire over eyebolt between eyebolt cap and top of pole Tighten Nylock nut just enough so end of eyebolt is flush with end of nut as shown 11 Assembly and Installation Instructions Picture B y Standard cap Ref 12 Back of backboard M10 Nylock nut Ref 20 Pole clamp Ref 13 M10 acorn nut Ref 21 7 Install standard cap at top of pole With the bolts straddling the enclosure pole just below the eyebolt install pole clamps and M10 Nylock nuts as shown Tighten all Nylock nuts evenly Then hand tighten acorn nuts on to end of M10 bolts 8 After backboard is mounted push eyebolt
5. cap toward pole then place net into eyebolt hook When net is in place let the spring return the eyebolt cap to close the hook 12 Assembly and Installation Instructions Picture B AAS RT VAS NA RI WXXX OQ Y NV Your Air am Basketball Set is now fully assembled and ready for use Please remember do not hang from the basketball set 13 eer s Assembly and Installation I nstructions Picture B This page left intentionally blank JumpSport Limited 90 Day Warranty What is covered by this warranty This warranty covers any defects in materials or workmanship on all of the components of the JumpSport AirJam Basketball Set and is extended exclusively to the original retail purchaser How long does this coverage last Warranty coverage for each component begins from the original date of purchase and lasts for 90 days What will JumpSport do If you return the defective part to JumpSport as instructed below JumpSport will either repair or replace such part at JumpSport s discretion and return it to you What is not covered by this warranty This warranty does not cover expenses of on site labor travel assembly or disassembly or other charges associated with the repair or replacement of covered components This warranty also does not cover any problem that is caused by abuse misuse ordinary wear and tear weathering acts of God such as wind and lightning failure to follow directions impr
6. corn nut Ref 18 20 and 21 M10 standard nuts Ref 17 M10 washer and To standard nut 9 Ref 18 and 19 0 g M10 washers Ref 16 M10 x 50mm bolts Ref 15 Back of backboard M10 x 95mm bolt Ref 14 6 Mount hoop assembly onto front of the backboard using two M10 x 50mm bolts and two M10 x 95mm bolts as shown M10 x 50mm bolts go in top two holes M10 x 95mm bolts go in bottom two holes Place flat back plate onto back of backboard over ends of the four bolts Then place an M10 washer over each of the bolt ends not the center M8 bolt Next tighten an M10 standard nut onto the bottom two bolts and an M10 Nylock nut onto the top two bolts Finally hand tighten an M10 acorn nut over top two M10 bolts only gt Kaa KO x OSPR OD Soa RES sA Back of backboard Cap with notch Ref 11 Sa M8 washer Ref 250 W fuat M8 Nylock nut Ref 25c M8 acorn nut Ref 250 N Je S ba Al M10 Nylock nut Ref 20 o a ne all rt oot nar et oot Pole clamp Ref 13 M10 acorn nut Ref 21 7 Important Basketball Set should be installed on a pole directly opposite the entrance to the safety enclosure Assembly and Installation Instructions Picture A Remove existing ball end cap from pole Install cap with notch to top of pole With the bottom two M10 bolts straddling the enclosure pole install a pole clam
7. ion around top of net Place net over hoop Reattach Velcro around hoop working clockwise M8 x 25mm bolt 4 Ref 21 M8 washer sa Ref 22 i 1 Z i 1 S I I tot ie Front plate D 9 I Tab of hoop with tongue gt Se I Ref 46 gt a Se y V V f MMA WH ZA Rr NAA X A V f 3 Insert front plate with tongue into slot on hoop tab so that tongue is above end of tab and below plate with screw holes Connect front plate with tongue to hoop tab using two M8 x 25mm bolts four M8 washers and two M8 Nylock nuts Tighten securely M8 Nylock nut Ref 23 SS SX Assembly and Installation Instructions Picture A os Ko Se NSS Nos M8 x 80mm bolt K gt T VS Ref 20 a RAK WAP ANY Ih NN KAMI f y Front plate with grooves Ref 5 4 Now place an M8 x 80mm bolt through upper middle hole on 5 Slide front plate with tongue into front plate with grooves You front plate with tongue To find which side of front plate with now have a completed hoop assembly tongue is the top place front plate on front of backboard and align holes of plate with holes in backboard If the holes do not align rotate front plate with tongue until it fits Then install M8 x 80mm bolt into upper middle hole Push it all the way in and rotate it until the hex head is flush with the front plate M10 washer Nylock nut and a
8. nch and a Phillips screwdriver 2 double sided hex wrenches are included in Box 2 see Reference 11 and 12 in the list below An 8 foot A Frame ladder will be useful for some Steps use care and follow procedures for use Safety glasses and Note M10 bolts and related hardware are bigger in diameter than M8 bolts and related hardware The two wrenches are the only parts not shown on the following page Reference Part 1 BAC P 10373A Backboard JumpSport Description Quantity Box 1 1 3 TOO P 10344A Combo wrench fits 18mm amp 17mm hex heads 1 2 5 PLA P 10361A Front plate with grooves 1 2 7 HOO P 10363A Hoop N 9 BAL P 10340A Ball ND 11 CAP P 10341A Cap with notch fits poles with Picture A ball end cap with notch ND 13 CLA P 10342A Pole clamp N N N N 15 BOL P 10365A M10 bolt 50mm long 17 NUT P 10374A M10 standard nut fits M10 bolts A ND 19 NUT P 10353A M10 acorn nut fits M10 bolts A ND 21 BOL P 10364A M8 bolt 25mm lon 23 NUT P 10358A M8 Nylock nut fits M8 bolts wo N Assembly and Installation Instructions This basketball set is designed for 2 types of enclosure Ref 1 poles so you will have extra parts Ref
9. oper installation or improper maintenance Rust is a natural occurrence with any outdoor steel product and is likewise not covered by this warranty to the extent that it does not affect the structural integrity of the part This warranty does not cover the trampoline or any related safety enclosure to which the basketball set attaches See individual trampoline and safety enclosure warranties for specific coverage details for those products JUMPSPORT IS NOT RESPONSIBLE OR LIABLE FOR INDIRECT SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE PRODUCT OR OTHER DAMAGES WITH RESPECT TO ANY LOSS INCLUDING BUT NOT LIMITED TO ECONOMIC LOSS LOSS OF PROPERTY LOSS OF REVENUE OR PROFITS LOSS OF ENJOYMENT OR USE COST OF REMOVAL INSTALLATION OR OTHER CONSEQUENTIAL DAMAGES SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES ACCORDINGLY THE ABOVE LIMITATION MAY NOT APPLY TO YOU THE WARRANTY EXTENDED HEREUNDER IS IN LIEU OF ALL OTHER WARRANTIES AND ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS LIMITED IN ITS SCOPE AND DURATION TO THE TERMS SET FORTH HEREIN SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS ACCORDINGLY THE ABOVE LIMITATION MAY NOT APPLY TO YOU How to get a defective part replaced Call the JumpSport Customer Service department at 408 213 2551 to obtain a Return Authorization number All retu
10. p and two M10 Nylock nuts as shown M8 bolt should slide through hole in cap with notch Place M8 washer and M8 Nylock nut over M8 bolt Tighten all Nylock nuts evenly Then hand tighten acorn nuts on to end of bolts Your Air am Basketball Set is now fully assembled and ready for use Please remember do not hang from the basketball set Assembly and Installation Instructions Picture B Type B Assembly Note Use pages 4 amp 5 to help with part names and numbers Not all parts will be used for this installation End of hoop is pointing down Q 1 Orient hoop so that end of tab pointing down 2 Detach Velcro connection around top of net Place net over hoop Reattach Velcro around hoop working clockwise Front plate M8 x 25mm bolt with tongue Ref 21 TT S gt H Tab of hoo s ki AY y a I p v C NO ee i RSK DS KOON AA NAS f Le V ON VO K Front piate RORY M8 KI nut VIA W Ret 45 ui SAY Ref 23 N VVOO E 3 Insert front plate with tongue into slot on hoop tab so that 4 Slide front plate with tongue into front plate with grooves You tongue is above end of tab and below plate with screw holes now have a completed hoop assembly Connect front plate with tongue to hoop tab using two M8 x 25mm bolts four M8 washers and two M8 Nylock nuts Tighten securely Assembly and Installation Instructions
11. r free replacements e The AirJam Basketball Set should be used only as described in this manual The basketball set must only be mounted on a JumpSport safety enclosure system It should never be mounted on any other device structure or in any manner not described in this manual Do not attach anything to the basketball set or safety enclosure that is not a manufacturer approved accessory or part of the enclosure system e DO NOT allow more than one person on the trampoline DO NOT allow more than one person inside the trampoline enclosure Use by more than one person at the same time can result in serious injury This includes one on one type games and any other games or activities where more than one person is on the trampoline at the same time e Trampolines over 20 inches 51 cm tall are not recommended for use by children under 6 years of age e Do not hang from kick cut or climb on any part of the basketball set or safety enclosure e Remove all jewelry watches and hair clips before using the basketball set e Wear clothing free of drawstrings hooks loops or anything that could get caught in the basketball set or safety enclosure e Do not use the trampoline or basketball set while under the influence of alcohol or drugs e Do not install the basketball set on a pole that is near or over a missing or damaged frame pad e When not in use store the basketball provided with your set in a dry location e Use the trampoline
12. rns must be pre authorized Send the part s to the designated Service Center along with a copy of your original sales receipt and a brief written description of the problem including how it occurred You must pay freight and insurance to return the part to JumpSport At JumpSport s sole discretion we may ask you to send photographs in addition to or in lieu of returning the part After inspecting the returned part s JumpSport will make a final determination whether the part is covered by this warranty We reserve the right to examine photographs or physical evidence concerning parts claimed to be defective prior to making a final determination concerning the claim A repaired or replacement part will be returned to you Please allow 3 to 4 weeks for delivery This warranty gives you specific legal rights You may also have other rights which vary from state to state JumpSport nc 2055 South 7th Street Suite A San Jose CA 95112 408 213 2551 http www jumpsport com
13. s which may be present in this document or from use of this document Copyright 1998 2006 by JumpSport Inc All rights reserved Printed 2006 Instruction Manual P N INS P 10402B JumpSport AirJam Basketball Set P N BBJ S 10391A Trademarks JumpSport and AirJam Basketball Set are trademarks of JumpSport Inc All other brand or product names are trademarks or registered trademarks of their respective companies or organizations Patents This product includes technology associated with one or more of the following U S Patents No 6 053 845 No 6 261 207 No 6 840 891 No 6 846 271 Additional Patents Pending How to Contact Customer Support Should you require customer service or technical support for your JumpSport AirJam Basketball Set please contact JumpSport s Customer Service department at 408 213 2551 8 00am 5 00pm Monday through Friday Pacific Time CE Before installing and using your Airjam Basketball Set you must read and follow all safety rules on this page A WARNING It is the responsibility of the owner to become familiar with the safety rules and to convey these rules to all users e Read and follow all of the warnings and use instructions for your trampoline and safety enclosure e Read and follow all rules specified on the warning labels that came with your trampoline safety enclosure and basketball set If labels or signs become lost or unreadable please contact us immediately fo

Download Pdf Manuals

image

Related Search

Related Contents

Installation- and user manual LCS-KD04  Asrock H55M/USB3 motherboard  Icom IC-R8500 Service manual  Manual  Altec Lansing inMotion™ portable audio system  Betriebsanleitung Kehrmaschine tk20  

Copyright © All rights reserved.
Failed to retrieve file