ColorBar RGBW BAR BAT User Manual
Contents
1. wall Do not attempt to operate this unit if it becomes damaged This unit is intended for indoor use only use of this product outdoors voids all warranties During long periods of non use disconnect the unit s main power Always mount this unit in safe and stable matter Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to the point they exit from the unit Cleaning The fixture should be cleaned only as recommended by the manufacturer See Cleaning for details Heat The appliance should be situated away from heat sources such as radiators heat registers stoves or other appliances including amplifiers that produce heat The fixture should be serviced by qualified service personnel when A The power supply cord or the plug has been damaged B Objects have fallen or liquid has been spilled into the appliance C The appliance has been exposed to rain or water D The appliance does not appear to operate normally or exhibits a marked change in performance Fuse standard is2A 250V Grounded using yellow green line The ambient temperature must always be under 35 C Set Up Power Supply Before plugging your unit in be sure the source voltage in your area matches the required voltage for your TRI 10 RGBA BAR BAT The TRI 10 RGBA BAR BAT is workable in 100 220V 50 60Hz Because line voltage may vary from venue to2. ColorBar RGBW BAR BAT User Manual Battery Powered Wireless DMX LED Fixture Ce Please read over this manual before operating the light Introduction Unpacking Thank you for purchasing the Colorbar RGBW BAR BAT Every TRI 10 RGBA BAR BAT has been thoroughly tested and has been shipped in perfect operating condition Carefully check the shipping carton for damage that may have occurred during shipping If the carton appears to be damaged carefully inspect your fixture for any damage and be sure all accessories necessary to operate the unit has arrived intact Inthe case damage has been found or parts are missing please contact the manufacturer or your dealer for further instructions Do not return this unit to your dealer without first contacting Introduction The Colorbar RGBW BAR BAT is a DMX intelligent and battery powered LED par light This par light is light weight and compact which makes it a great piece for mobile DJ s and clubs Warning To prevent or reduce the risk of electrical shock or fire do not expose this unit to rain or moisture Caution There are no user serviceable parts inside this unit Do not attempt any repairs yourself doing so will void your manufactures warranty In the unlikely event your unit may require service please contact the manufacturer or your dealer PLEASE recycle the shipping carton whenever possible General Instructions To optimize the performance of this product please read these o
3. eral DMX fixtures try to use the shortest cable path possible The order in which fixtures are connected in a DMX line does not influence the DMX addressing For example a fixture assigned a DMX address of 1 may be placed anywhere in a DMX line at the beginning at the end or anywhere in the middle When a fixture is assigned a DMX address of 1 the DMX controller knows to send DATA assigned to address 1 to that unit no matter where it is located in the DMX chain DMX Values and Functions 4CH Mode Value RGBW 10 4in1 CH1 0 255 RED dimmer 0 255 CH2 0 255 GREEN dimmer 0 255 CH3 0 255 BLUE dimmer 0 255 CH4 0 255 WHITE dimmer 0 255 8CH Mode Value RGBW 10 4in1 CH1 0 255 RED dimmer 0 255 CH2 0 255 GREEN dimmer 0 255 CH3 0 255 BLUE dimmer 0 255 CH4 0 255 WHITE dimmer 0 255 CH5 0 255 R G B W dimmer 0 255 CH6 0 255 Auto CH7 0 255 Auto Slow to Fast 0 255 CH8 0 255 R G B W STROBE from slow to fast 0 255 CH9 0 255 SOUND Off 0 15 ON 16 255 LED Operation Menu Touch Buttons There are four touch buttons under the LED Alpha numerical display Menu Down Up Enter Normally the LED will display the current DMX address code of the fixture At this time presses Menu to choose the function you want to set up Press and hold Up or Down to fast scrolling within the menu options When an options flashing the LED display press Enter to confirm and Menu
4. ncy automatically high anti jamming ability to ensure works reliability 6 7 groups ID code settable User can use 7 groups individual wireless net without any interfere each other in the same place 7 Input voltage 5VDC 8 Work frequency section 2 4G ISM 126 channels frequency section 9 Max transmitting power rate 20dBm 10 Receiver sensitive 94dBm 11 Signal port RS485 or CPU series port AURT Compatible series product as follows LCD WI DMX ID 0 15 RAD WI DMX ID 1 7 XRL WI DMX ID 1 7 Operating manual 1 ID code and LED color corresponding relationship e 1 RED GREEN RED GREED BLUE RED BLUE GREEN BLUE e 7 RED GREED BLUE Press key 1 time to indicate ID setting Press again to set ID then ID value oa fF WwW DY adding 1 each time by press Working condition e LED constant lit up no DMX or wireless signal e Red LED flash transmitting e Green LED flash receiving RF frequency 2 400 2 525 G total 126 channels it s searching automatically ID Code 1 7 groups ID code press KEY for setting it only can works under same ID code of transmitter and receiver Establishing Communication 1 2 Caution gt Power on DMX512 wireless received board and transmitted board Press Key button to set same ID value of transmitted board and received board please use different ID value if you need use more than 1 group wireless ne
5. ntact your dealer for service Specifications Model Colorbar RGBW BAR BAT Battery powered and DMX LED lighting fixture LED display Working Position Any safe working position Power Supply Switching power supply Voltage AC 100 220V 50 60Hz Power Consumption 68W Colors RGBW Color Mixing LED 10 pcs 4in1 RGBW Packaging size 61 83 20cm N W 9kg Warranty 1 Year Note All information is subject to change without prior notice 2012 1 1 I gt
6. or more than 10 hours on auto running mode O Itis suggested to charge the battery for at least 8 hours which will extend the life span of the battery O Atthe bottom of the fixture there is a little hole which is the indicating light for the charge When charge the light the indicating light will be in red and when charged full it will be in green For wireless receiver Wireless Module of DMX512 MODE PCB WI DMX Brief DMX512 wireless receiver transmitter transmits standard DMX512 protocol data generated by console by wireless way which solves lighting control issues of wireless transmitting completely between console and lighting lighting and lighting and so on It get rid of connecting cable limited completely And also can ensure without any time delay when signal data is transmitting signal data is real time and reliably This product adopt 2 4G ISM frequency section global opening section without permission limited High effective GFSK modulate communication design 126 channels jumping frequency automatically high anti jamming ability Application Upgrade DMX512 stage lighting Product feature 1 Product name 2 4G wireless DMX512 R T molding board 2 Small size Easy to suit for interior of accessed lighting 3 Single key to operate tricolor LED displaying 4 Transmitting standard DMX512 protocol data of console also can transmit lighting and lighting DMX512 protocol data 5 126 channels jumping freque
7. perating instructions carefully to familiarize you with the basic operations of this unit These instructions contain important safety information regarding the use and maintenance of this unit Please keep this manual with the unit for future reference Features Multi colors Control Channels 4 8CH Color Strobe Master Slave synchronization DMX 512 protocol Electronic Dimming 0 100 Operating Modes Sound activation Auto and DMX control mode Led operation menu with function buttons Daisy Chain Units Together in DMX Mode 1 20 flashes sec strobe effect Safety Precautions To reduce the risk of electrical shock or fire do not expose this unit to rain or moisture Do not spill water or other liquids into or on to your unit Be sure that the local power outlet matches that of the required voltage for your unit Do not attempt to operate this unit if the power cord has been frayed or broken Do not attempt to remove or break off the ground prong from the electrical cord This prong is used to reduce the risk of electrical shock and fire in case of an internal short Disconnect from main power before making any type of connection Do not remove the cover under any conditions There are no user serviceable parts inside Never operate this unit when its cover is removed Never plug this unit in to a dimmer pack Always be sure to mount this unit in an area that will allow proper ventilation Allow about 6 15cm between this device and a
8. t at same time in same place The red LED flashes when transmitter transmits DMX data by no interfered frequency section then receiver changes communicated frequency section Green LED flash till received corrected same ID value LED flash faster once DMX data faster Communication was established correctly then Don t repair this R T board by yourself it should be returned to manufacturer to repair if any problems Cleaning Due to fog residue smoke and dust cleaning the internal and external optical lenses must be carried out periodically to optimize light output 1 Use normal glass cleaner and a soft cloth to wipe down the outside casing 2 Clean the external optics with glass cleaner and a soft cloth every 20 days 3 Always be sure to dry all parts completely before plugging the unit back in Cleaning frequency depends on the environment in which the fixture operates i e smoke fog residue dust dew Trouble Shooting Listed below are a few common problems the user may encounter with solutions Unit does not respond to DMX 1 Check that the DMX cables are connected properly and are wired correctly pin 3 is hot on some other DMX devices pin 2 may be hot Also check that all cables are connected to the right connectors it does matter which way the inputs and outputs are connected Unit does not respond to sound 1 Quiet or high pitched sounds will not activate the unit If problems are not resolved co
9. to exit After initialization the unit is ready for setting and working Please see the following table for setting information Display Function ADDR DMX Address 0 512 CHMD 4CH 8CH SLND NAST Master SLAL Slave SHND SOND Sound control COLO Color choose 1 15 Auto operation SP1 SP8 FADE Running Speed SP1 SP8 NANU Red 0 255 Green 0 255 Blue 0 255 Amber 0 255 TEST Quality Control FHRS Operating Hours For Battery Function and Charge The unit has the function of battery powered and the function is described as below There are two buttons on the rear panel of the lighting One is for power and the other is for battery When use the fixture with DMX not battery please switch the button for power to on and switch the button for battery to bat off When use the fixture with battery instead of DMX please switch the button for power to off and also switch the button for battery to bat on When charge the light please switch the button for battery to charge At the same time if the switch for power is on the light will be at work during the process of charge but will consume some power from the charge if the switch for power is off the light will be blackout and not be at work Tip for the battery and charge The battery can last for 6 hours when all LEDs on after full charge and can last f
10. venue you should be sure your unit voltage matches the wall outlet voltage before attempting to operate you fixture Operating Instructions PRN Modes You can use the Colorbar RGBA BAR BAT in 5 ways Sound activation The unit will activated by the sound signal Static display The unit will display the color in static way Auto Mode The unit will automatically chase through the different patterns DMX control mode This function will allow you to control the lighting with a standard DMX 512 controller Battery powered This function will allow you to control the lighting independently without any DMX cable V VVVV DMX Mode Operating through a DMX controller give the user the freedom to create their own programs tailored to their own individual needs This function also allows you to use your fixtures as pattern changing lights 1 This function will allow you to control each individual fixture s traits with a standard DMX 512 controller 2 The Colorbar RGBA BAR BAT uses 6 DMX channels to operate Please see DMX Values and Functions for the DMX traits 3 To run your fixture in DMX mode plug in the fixture via the XLR connections to any standard DMX controller Set your desired DMX address following the setup specifications that come with your DMX controller 4 The unit can automatically recognize the DMX signal once the DMX connection is done DMX Linking To ensure proper DMX data transmission when using sev
Download Pdf Manuals
Related Search