P1949 - Super jolly major A electronic
Contents
1. SUPER JOLLY o MAJOR GRINDER DOSER GRINDER DOSER CS 5 mm inches mm inches A 195 7 A 212 81 B 263 102 B 292 112 H C 240 9 2 H C 240 9 2 D 420 1612 D 455 H 610 24 H 635 212 84 212 LE as ess DAT HAS po Cr SS Ce See ee KONY ROBUR ROYAL STARK A GRINDER DOSER GRINDER DOSER GRINDER DOSER E mm inches mm inches mm inches A 206 A 240 912 A 285 111 B 263 1014 B 310 121 4 B 240 92 C 240 912 C 475 193 C 400 15 H D 420 1612 H H 720 280 H 687 27 H 650 2512 gia 212 8 4 212 E__2 B lt A gt as 3 GENERAL DESCRIPTION SUPER JOLLY MAJOR KONY ROBUR ROYAL STARK 1 HOPPER COVER 2 HOPPER coffee bean container 3 GRINDING ADJUSTMENT DISK HANDLE 4 LOCKING SLIDE 5a HOPPER SAFETY SCREW 5b HOPPER FIXING PIN 6 COFFEE GRINDING ADJUSTMENT DISK 7 PUSH BUTTON PANEL 8 FUNNEL DOSER 9 FILTER HOLDER FORK 10 SERIAL NUMBER LABEL 11 SWITCH 12 DRIPTRAY 4 PACKAGING On opening the packaging check carefully to make sure the appliance is intact and that there are no signs of damage If in any doubt do not use the unit and contact personnel with the appropriate professional skills The packaging materials must be kept out of the2. inches 7 1214 NET 28 k EIA E SOS 0 ay WIERTE EM O Q ho fraton Ve ce MACINADOSATORE ROBUR REGOLAZIONE DI MACINATURA MICROMETRICA CONTINUA Funzionamento automatico con avviamento ogni 12 dosi ed arresto al riempimento del dosatore CARATTERISTICHE TECNICHE Potenza Watt 900 Macine coniche monofase rif 186C mm De7l trifase rif 187C mm Ge 83 Giri macine g min 420 50 Hz g min 500 60 Hz Capacita contenitore caffe in grani Kg 1 8 Capacit contenitore caff macinato g 360 Regolazione dose g 5 5 8 Peso netto Kg 28 AN GRINDER DOSER ROBUR STEPLESS MICROMETRICAL GRINDING ADJUSTMENT Automatic grinding cycle with start every 12 doses and stop when the ground coffee doser is full TECHNICAL FEATURES Power Watt 900 Conical grinding blades single phase ref 186C mm Qe7l 24 inches three phase ref 187C mm e 83 3 4 inches Grinding blade speed r p m 420 50 Hz r p m 500 60 Hz Coffee bean container capacity Kg 1 8 4 lbs Ground coffee container capacity g 360 0 8 Ibs Dose adjustment g 5 5 8 0 19 0 28 oz Net weight Kg 28 62 Ibs MOULIN DOSEUR ROBUR R GULATION DE MOUTURE MICROM TRIQUE CONTINUE Fonctionnement automatique avec d marrage toutes les 12 doses et arr t remplissage du doseur de caf moulu CARACT RISTIQUES TECHNIQUES Puissance Watt 900 Meules coniques uniphas r f 186C mm e 7l tripha
3. mm e 83 Rotac es dos mos g min 420 50 Hz g min 500 60 Hz Capacidade de caf em gr os Kg 1 8 Capacidade de caf moido g 360 Regula o de dose g 5 5 8 Peso liquido Kg 28 Accessori Opzionali Optionals Options Optionals Opciones Op oes MACINADOSATORI GRINDER DOSERS MOULIN DOSEURS DOSIERKAFFEEMUHLEN MOLINOS DOSIFICADORES MOINHOS DOSEADORES Calamita con anello Magnet with ring Aimant avec anneau Magnet mit Ring Iman con anillo Iman com anel Dosatura maggiorata 8 10 5 g Oversize dose 8 10 5 g 0 28 0 36 oz Dose major e 8 10 5 g Erh hte Dosierung 8 10 5 g Dosis aumentada 8 10 5 g Dose maior 8 10 5 g Pressino a molla con forchetta lunga Spring coffee pressing device with long fork Presse caf a ressort avec fourchette longue Kleine Feder presse mit langer Stiitzgabe Prensador con resorte y horquilla larga Prensador com mola e forquilha comprida Il costruttore si riserva la facolt di apportare quelle modifiche tecniche che si rendessero necessarie senza preavviso The manufacturer reserves the right to change specifications without notice Le constructeur se r serve le droit d effectuer des modifications sans aucun pr avis Der Hersteller vorbehaltet sich den technischen Daten warnunglos zu ndern El constructor se reserva el derecho de efectuar sin previo aviso las modificaciones que considere oportunas en int r s de mejoras
4. opper the top blade container with the screw appropriate screw according to the grinder model Close the locking slide and fill the hopper with coffee beans Open the locking slide so that the beans are allowed to drop into the grinding system SWITCHING THE APPLIANCE ON AND OFF In order to power up the appliance set the on off knob to I The display located on the lid of the push button panel will show a counter with the incremental number of doses ground by the appliance After having placed the filter holder on the filter holder fork push the push button on the left indicating one cup to grind and dispense a single dose the push button on the right indicating two cups to grind and dispense a double dose The counter adds one for each single dose one cup sign and adds two for each double dose two cup sign One can manually activate the appliance keeping pushed the push button for man ual grinding indicating located in the centre of push panel Hold down the push button for manual grinding and the grinder will grind until you lift the finger By using the push button for manual grinding no dose is added in the counter We suggest to use the push button for manual grinding to adjust the grinding of the appliance In order to switch off the appliance turn the knob of the switch to O MAJOR KONY ROBUR ROYAL STARK SUPER JOLLY HOPPER FIXING PIN DISPLAY MENU BUTTON P
5. OPERATE THE APPLIANCE IF THE APPLIANCE GETS SWITCHED OFF SWITCH IN THE POSITION O BEFORE EXITING FROM THE AJUSTING PROGRAM THE CHANGES ARE NOT SAVED In order to collect the portions of ground coffee insert the filter holder all the way onto the fork shaped support under the ground coffee outlet 9 WARNINGS REGARDING OPERATION e OPERATING RANGE OF THE MOTOR IN THEVERSIONS WITH SINGLE PHASE MOTORS OBSERVE THE DUTY CYCLE ON OFF STATED IN THE LABEL LOCATED ON THE LEFT SIDE OF THE APPLI ANCE E g a data on the label 20s ON 30s OFF point out an allowed duty cicle of 20 sec onds switched on and 30 seconds switched off FIRST INSTALLATION For the correct use of the grinding blades at the first installation or whenever the grinding blades have been replaced grind some doses of coffee Do not use those first doses For the appliance to function at its best on its first installation and every time the hopper is cleaned after having ground a few coffee doses clean the inner surface of the funnel dosing unit with a dry brush 10 SAFETY DEVICES e THERMAL OVERLOAD PROTECTION The appliance s motor is protected against overheating resulting from overcurrents by a thermal overload protection which when tripped cuts off the power supply to the motor Should the protection trip as a result of anomalous operation such as the grinding blades jamming the appliance must be turned off using the on off switch UNPLUGGED FROM THE
6. HNI CAL PERSONNEL ONLY Use perfectly clean disinfected cloths or brushes for cleaning Do not use abrasive products as these are liable to take the sheen off shiny parts Hopper Wash the hopper after having removed it from the appliance with water and neutral soap rinse it accurately with warm water and dry perfectly well It is advisable to regularly clean the hopper After cleaning operations the hopper must be correctly fixed to the appliance with the appropriate linchpin or appropriate screw Grinding system After having removed the safety screw if the appliance is fitted with one pre venting removal of the grinding adjustment ring remove the ring by rotating it clockwise Remove the top blade container and clean the blades the threads and the entire grinding system with a brush and a dry cloth After having placed the top blade container back into place screw the adjust ment ring and insert in models fitted with one the tamper proof screw in the hole allowing most adjustment Place the hopper back into place and then set the grind adjustment Funnel After having removed the lid with the operating switches clean the funnel and its lid with a dry and disinfected brush Mazzer Luigi srl All right reserved It is prohibited to reproduce adapt or translate this document witout prior written authorization First Edition March 2007 Last revised ELO2 07 2010
7. MAINS AND SKILLED TECHNICAL PER SONNEL CONTACTED NEVER PERFORM ANY WORK ON THE APPLIANCE WHILE IT ISATTACHED TO THE MAINS TO AVOID THE RISK THAT MOTOR TURNS ON SUDDENLY If the appliance overheats as a result of the motor stopping allow the appliance to cool down before performing any repair work MOTOR LOCKING MICROSWITCH MAJOR KONY ROBUR ROYAL STARK The system that protects against accidental contact e e ee with the rotating parts of the grinding system con sists of a microswitch situ ated under the body of the appliance that cuts the electricity to the motor HOPPER HOPPER TONGUE MICROSWITCH MICROSWITCH The push button that controls this device is operated by a tongue in the collar of the hopper If the hopper is removed or not properly in place the microswitch prevents the appliance from working To ensure the hopper is positioned correct ly it must be fixed to the casing using the relevant pin on the collar SAFETY SCREWS SUPER JOLLY The hopper must always be attached to the upper grinding blade holder using the Sony relevant screw which Y must not be removed by the user under any circumstances In order to prevent the adjustment disk from being removed which would make the rotating parts accessible there is a safety screw on the actual disk said screw must be positioned in whichever of the two holes on the disk enables the wider and most suitable range
8. ORK ON THE APPLIANCE INCLUDING CLEANING AND OR MAINTENANCE DISCONNECT IT FROM THE POWER SUPPLY BY UNPLUGGING TURNING OFF THE APPLIANCE USING ITS MASTER SWITCH DOES NOT ASSURE THE SAME CONDITIONS OF SAFETY When the appliance is left unattended the appliance s power supply must be dis connected using its master switch for example at night during work breaks midweek closing or holidays Do not let liquids of any kind come into contact with the internal or external parts of the appliance Never put ground coffee in the hopper intended only for coffee beans Do not tamper with the appliance Do not tug on the supply cable to unplug the appliance from the mains Do not touch the appliance with damp or wet hands or feet Do not use the appliance barefoot The manufacturer cannot be held responsible for bodily injury or damage to prop erty if these regulations are not complied with 12 NOISE LEVEL EEC Countries The maximal noise emission of our coffee grinders or grinder dosers valued as acoustic power is 81 dB A measured in ISO 3741 reverberating chamber according to EN 60704 1 1998 and EN 60704 3 1996 The daily personal noise exposure of a worker due only to an appliance s limit operation of 240 min per eight hours is 78 dB A according to ED 86 188 EEC and ED 2003 10 EEC Therefore during he appliance s normal operation no pro visions are to be taken in order to prevent such risks arising or likely to arise from noise e
9. USH BUTTON FOR MANUAL GRINDING SINGLE DOSE SWITCH DOUBLE DOSE SWITCH ADJUSTING GRINDING In order to achieve finer or coarser grinding the adjustment disk located under the hop per must be adjusted using the relevant handle In order to increase the coarseness of the ground coffee the disk must be rotated clock wise to decrease turn the disk anticlockwise COARSER GRINDING FINER GRINDING The disk remains in the chosen position without having to be locked in place The adjustment must be performed with the motor on and preferably without any coffee between the grinding blades Grind small amounts of coffee in order to determine the optimal degree of fineness Before checking the fineness of the ground coffee grind some doses of coffee to fill the duct between the grinding area and the outlet This operation must be done whenever the grinding setting has been changed in order to empty the duct of the previous ground coffee The change of the grinding setting might vary the weight of the doses Therefore adjust the doses only after the grinding setting In the grinder doser version if the coffee comes out of the espresso coffee machine very quickly it means the coffee is ground too coarse Viceversa if it comes out too slowly it means the coffee is ground too fine Nonetheless bear in mind that there are many conditions liable to influence the correct supply such as the weight o
10. f the portions the compacting the espresso machine settings and the cleaning of the filters COFFEE DOSE ADJUSTMENT In order to adjust the size of the portion dispensed use the push button controls located on the lid of the funnel After having set the optimal degree of fineness check the weight of the dose with a digital precision scale In order to adjust the dose press the push button MENU for 3 seconds the display will blink Select the dose you wish to adjust either the single dose indicating one cup or the double dose indicating two cups The display will show the grinding time in seconds of the selected dose By pressing the push buttons and the grind ing time can be increased or decreased and consequently the selected dose can be increased or decreased Approximately a change of 0 10 seconds is equivalent to a change of dose of 0 3 grams 0 01 onces To set the desired amount of grinding time press the push button MENU for 3 seconds A blinking of the display will confirm the data have been saved and the exit from the adjusting program Use a digital precision scale to check again the weight of the dose and if necessary repeat above mentioned operation PUSH BUTTON PANEL DISPLAY MENU BUTTON GRINDING TIME ADJUSTMENT BUTTONS SINGLE DOSE BUTTON DOUBLE DOSE BUTTON PUSH BOTTON FOR MANUAL GRINDING WHEN YOU ARE INSIDE THE AJUSTING PROGRAM IT IS NOT POSSIBLE TO
11. of grinding adjustment and must not be removed by the user under any circumstances COFFEE OUTLET GUARD DISCK SAFETY SCREW ALTERNATIVE TAPPED HOLE e COFFEE OUTLET GUARD The coffee outlet guard must always be fixed to the doser using the relevant screws which must never be removed by the user The removal of the coffee outlet guard can be done by skilled technical person nel only after disconnecting the appliance from the power supply by unplugging Before reconnecting the appliance to the power supply fix the safety device to the doser by the relevant screws 11 WARNINGS REGARDING SAFETY This electrical appliance must be used in conformity with the rules in force gov erning safe operation e WHEN OPERATING THE APPLIANCE BEWARE OF THE MOVING MECHANICAL PARTS IN THE AREA OF THE GRINDING BLADES AND OF THE GROUND COFFEE OUTLET BEFORE REMOVING THE HOPPER FROM THE GRINDING SYSTEM DIS CONNECT THE POWER SUPPLY AVOID REMOVING FOREIGN BODIES FROM THE GRINDING SYSTEM OR HOPPER WITHOUT FIRST UNPLUGGING THE APPLIANCE FROM THE MAINS e Take care as the grinding blades may continue rotating for a short while even after the appliance is switched off THE USER IS NOT AUTHORIZED TO REMOVE SCREWS OR ANY PARTS SCREWED ONTO THE APPLIANCE In the event the appliance is not working properly or is faulty contact skilled technical personnel and do not attempt to make repairs yourself BEFORE PERFORMING ANY W
12. reach of children as they repre sent a potential source of danger Keep the packaging until the warranty has expired 5 DISPOSAL Do not litter dispose of the packaging materials according to the laws in force Should you decide not to use the appliance any more remember to unplug it so that it cannot be used and then cut the cable in the point where it comes out of the appliance Contact specialized firms for information on the disposal of the components of the appliance 6 USE This appliance has been designed solely for grinding coffee beans Any other use is understood to be improper and consequently hazardous The manufacturer cannot be held responsible for any damage as a result of improper or incorrect use Do not use the appliance for grinding other types of food or anything else THE COFFEE GRINDERS AND COFFEE GRINDER DOSERS MANUFACTURED BY OUR COMPANY ARE INTENDED FOR SKILLED PERSONNEL ONLY FOR PROFESSIONAL USEAND NOT FOR HOUSEHOLD USE The user must be an adult Do not allow children or incapable persons to use the appliance 7 INSTALLATION AND WIRING The appliance must be installed by skilled technical personnel in conformity with the safety rules in force Incorrect installation may result in injury of persons or animals or damage to property for which the manufacturer cannot be held responsible e The appliance must be placed on a stable flat surface e Before plugging in the appliance make sure the vol
13. s r f 187C mm e 83 Tours meules g min 420 50 Hz g min 500 60 Hz Contenance de la tr mie Kg 1 8 Contenance du doseur g 360 R glage de la dose g 5 5 8 Poids net Kg 28 DOSIERM HLE ROBUR STUFENLOSE MIKROMETRISCHE MAHLREGELUNG Automatische Mahlung mit Start bei jeder 12 Dosis und Stop beim Anf llen des Dosierers TECHNISCHE DATEN Leistung Watt 900 Konische Mahlscheiben einphasig Kennziffer 186C mm e 71 dreiphasig Kennziffer 187C mm e 83 Mahlscheibenumdrehungen g min 420 50 Hz g min 500 60 Hz Kapazit t des Bohnenbeh lters Kg 1 8 Kapazit t des Dosierers g 360 Einstellung der Kaffeepulverdosis g 5 5 8 Nettogewicht Kg 28 4 amp AN El MOLINO DOSIFICADOR ROBUR REGULACI N MOLIENDA MICROM TRICA CONTINUA Funcionamento autom tico con puesta en marcha cada 12 dosificaciones y parada cuando se lliena el dosificador DATOS T CNICOS Potencia Watt 900 Fresas conicas monof sico ref 186C mm De7l trif sico ref 187C mm Ge 83 Giros fresas g min 420 50 Hz g min 500 60 Hz Capacidad de la tolva Kg 1 8 Capacidad del dosificador g 360 Regulaci n de la dosis g 5 5 8 Peso neto Kg 28 MOINHO DOSEADOR ROBUR REGULAGAO DA MOAGEM MICROM TRICA Funcionamento autom tico com partida a cada 12 doses e paragem ap s o enchimento do doseador DADOS T CNICOS Potencia Watt 900 M s conicas monof sico ref 186C mm De 71 trif sico ref 187C
14. t cnicas en sus fabricados O constructor reserva se o direito de modificar sem aviso previo as m quinas tratadas neste manual MAZZER LUIGI s r l via Moglianese 113 30030 Gardigiano di Scorz VE Italy Tel 39 041 58 30 200 r a Fax 39 041 58 30 060 www mazzer com E mail mazzer mazzer com cod fisc e P IVA 00165200270 2001 2000 STRODOS052005 A EA CONTENTS l Foreword si diia page 2 2 DIMENSIONS sobr cada anar 2 3 General descripto sc vai oss ea a RI aa 3 4 Packaging lt lt riers rss e KOREN EE ESE e iS 3 3 Disposal stars AS 3 6 US sitiada did nba 4 7 Installation and Wiring ois 60 00 0cccnwe cd eine eee eewene acne 4 8 Operation of the appliance 5 00 sss ssa nine axe Saale warn dae aoe ek 5 9 Warnings regarding operation 6 426s0c 0sa0000eaees eu 8 l0 Safety TONES denina ES 8 I1 Warnings regarding safety i502 scsi dete cane dis 9 12 Noise levels s 3 c09 css eohocbs woes nets eeu we te ee a eeaews 10 3 Maintenance cic cnmiiaedso4e beeen eand 40 ee en ee bd 11 14 Cleaning the appliance a A 11 1 FOREWORD Read this manual from cover to cover before using the appliance as it contains important instructions for the safety operation and maintenance of the appliance Look after this manual and keep it in a safe place The manufacturer reserves the right to make changes to the product and to the manual 2 DIMENSIONS
15. tage and frequency values of the supply mains correspond to the ratings indicated on the label featuring the appliance s technical data e The wall socket must be fitted with an efficient earth contact Consequently it is essential to make sure the earth system is efficient and in conformity with current safety rules If in any doubt have the system thoroughly checked by per sonnel with the appropriate professional skills IT IS COMPULSORY TO EARTH THE APPLIANCE The manufacturer cannot be held responsible in the event this regulation is not complied with It is essential to make sure the ratings of the system are suitable for the power absorbed by the appliance as indicated on the label featuring the technical data and that the wall socket is protected against overcurrents e Do not use extension cables plug adapters for multiple sockets or makeshift connections In EEC member countries the regulation in force calls for the external equipoten tial terminal o on the outer part of the appliance s base plate to be connected to a equipotential node if the installation is to be correct THE HOPPER MUST BE PLACED ON THE APPLIANCE AND PROPERLY FIXED WITH THE APPROPRIATE SCREW OR WITH THE APPROPRIATE LINCHPIN ACCORDING TO GRINDER MODEL 8 OPERATION OF THE APPLIANCE PRELIMINARIES Verify that the hopper is correctly placed on the appliance and fixed to the casing with the appropriate linchpin placed on the collar or to
16. xposure at work articles 3 8 of ED 2003 10 EEC USA amp CANADA The noise level of our appliances is included within the limits stated in U S reg ulation 29 CFR 1910 95 Occupatinal Health and Environment Control Occupational noise exposure for eight hours continuosly in a day Said noise level has been determined on identical news appliances 13 MAINTENANCE It is essential to check the state of the supply cable and plug periodically IN THE EVENT THE SUPPLY CABLE OR PLUG ARE DAMAGED CALL IN SKILLED TECHNICAL PERSONNEL TO REPLACE THEM THIS TO PREVENT ANY RISK IN C CERTIFIED APPLIANCES A SPECIAL TOOL IS REQUIRED TO OPEN THE BASE PLATE TO GET AT THE CABLE It is recommended to use original spare parts only In order to assure the lasting efficiency of the appliance skilled technical person nel must be called in to perform periodical maintenance including detailed checks of the state of those components subject to wear The state of the grinding blades must be checked periodically Keeping the grind ing blades in an excellent state assures high quality grinding resulting in greater productivity and limited overheating 14 CLEANING THE APPLIANCE DISCONNECT THE APPLIANCE S POWER SUPPLY BY UNPLUGGING IT BEFORE CLEANING THE APPLIANCE MUST NOT BE CLEANED USING WATER JETS Do not install the appliance in rooms where water jets are used for cleaning THE APPLIANCE MUST BE CLEANED PERIODICALLY BY SKILLED TEC
Download Pdf Manuals
Related Search