MC-2GT-SFP
Contents
1. m Single mode 8 3 125 8 7 125 9 125 or 10 125 u m 10 Dimensions 90mm L x 60mm W x 20mm H Not including SFP transceiver module length SCO NDNA nN FW NY amp Cautions 1 This product is suitable for indoor applications 2 Put on the dust cover of fiber interface when not used 3 It is forbidden to stare at the TX fiber transfer end with naked eyes 4 WDM transceivers must be used in pair F Trouble shooting 1 Device is not matched Please select the corresponding network device according to the transfer rate of the product 1OMbps or 100Mbps or 1000Mbps when connected to other network devices 2 Line loss is excessive during the fiber wiring Excessive loss in connector plug in and fiber soldering and excessive intermediate nodes may cause excessive loss rate or abnormal operation Megatel Industries Corporation 664 Wagner Court ega T North Wales PA 19454 USA TEL 1 610 239 8812 FAX 1 215 699 3348 sales megatelindustries com www megatelindustries com2. MC 2GT SFP 2 Port 10 100 1000Base TX to 1000Base FX SFP Converter User Manual Brief introduction MC 2GT SFP is a dual copper and one fiber Gigabit Ethernet converter and switch and is designed to make conversion between 10 100 1000Base T and 100 1000Base X with SFP connector This converter supports IEEE802 3 IEEE802 3Z 1000Base TX FX protocols Packing List Please check the following items in the package before installing the media converter Mini media converter 1 Unit AC DC Power adaptor 1 PCS User Manual 1 Copy Please contact us immediately for any loss or damage to the above items SF Installation 1 Interface RJ 45 interface The transmission media adopts CATSe or CAT6 twisted pair with maximum length up to 100 meters 330feets Fiber interface SFP fiber interface is of duplex mode type including two interfaces namely TX and RX When the two sets of optical transceiver are interfaced or connected to switch with fiber interface the fiber is in cross connection namely TX RX RX TX direct butting for single optical fiber transceiver module Power supply interface The AC DC power adaptor is connected to DC input jack of media converter 2 Connection The network device IP camera wireless AP VoIP phone etc with RJ 45 interface is connected to RJ 45 jack of media converter through twisted pair And the multi single mode optical fiber is connected to SFP fiber interface of the optical transceiver mo
3. dule Then connect the AC power adaptor the media converter will work The corresponding LED is on for correct connection See the table below for the LED indicator lamp Q O gt p E Description for LED indicator lamp LED indicator lamps serve as device monitoring and trouble display The following is the description for each LED indicator lamp TP1 GREEN 1000M Link Act RED 100M Link Act a Dual color 10M Link Act TP2 GREEN 1000M Link Act RED 100M Link Act Dual color 10M Link Act ON optic fiber cable is connected well ON the power is ok Dual color Two LED chips in one package are all bright or blinking at the same time ee Introduction to DIP switches 2 Jumbo frame Port isolation i FX 100M between two RJ 45 ports Main features 1 In conformity to IEEE802 3 IEEE802 3Z 1000Base Tx Fx standards 2 Supports IEEE802 3X flow control 3 Supports 100Base FX interface 4 Supports auto MDI MDIX function 5 Supports jumbo frame up to 9 6KB 6 Supports port based isolation F Technical parameters 1 Standard Protocol IEEE 802 3 IEEE802 3Z 1000 Base TX FX IEEE802 3X Connector 2 RJ 45 Jacks one SFP Slot one DC inlet connector Operation mode full duplex or half duplex mode Power supply parameter 5 12VDC Environmental temperature 0 C 50 C Relative humidity 5 90 TP cable Cat5e or CAT6 UTP cable Optical fiber Multi mode 50 125 62 5 125 or 100 140 u
Download Pdf Manuals
Related Search
MC 2GT SFP