ERTF - Losail International Circuit
Contents
1. MEMO GPS UNIK II RALLY RAID VERSION 2014 GPS activation O The bell satellites non reception indicator Appears during a few minutes at the power on If it still appears check if the antenna and its cable are connected and not damaged On Off Put on the light by SET then LIGHT Day code 4 digit code given during the briefing and displayed every evening at the bivouac Load the wpt for the next leg To enter the code push on the COD key from INI NAV for bikes press CD 1 enter the code with 4 or gt keys validate by ENT Navigation Press the INI key Screen when inside the unmasked radius or visible waypoint WPV OG Course followed by vehicle TW Direct course to the Wpt The arrow indicates the direction to the target waypoint 91 Direct distance to waypoint in km Information concerning WPM masked waypoints when outside unmasked radius Name of the next waypoint COG Course followed A waypoint is reached when the vehicle is in the radius defined for the wpt 200m or 90m The GPS switches automatically to the next waypoint Information will be true only if there is no bell symbol on the top of the screen CAR TRUCK Change of a waypoint If a Wpt can t be reached or if you don t want to reach it press NXT on the INI screen NAV for bikes z F i 8m 505 178 ezoa 2440 W to go to the next it STI waypoint W2. ent near by you hear Beeeep beeeep beeeep flash blinks and GPS shows To inform the vehicle which wants to overtake that you have heard is signal and that you are going to let him pass a S a p Press briefly the push button less than 2s which cuts the sound in the cockpit If you don t acknowledge receipt of the signal an acknowledgement of receipt is automatically sent at the end of 6s b Buzzer volume From main navigation screen press SET key and then SENTINEL key 3 positions 1 2 3 Flash a Optional TEST y BUZZER 3 reer Taras tot te To stop the sound during 1 minute in the cockpit 9 Press briefly the push button less than 2s E F 1 F ication in speed control area Speedox function sound int From main navigation screen press SET key and then SENTINEL key 3 positions SECURITY PERFORMANCE OFF SECURITY Mode PERFORMANCE Mode OFF Mode Continuous sound from the Continuous 1 beep by minut speed limit No sound second from the speed limit 5 speed limit from the speed km h 3 km h limit 4 km h 2 km h signal 2 beeps per sound from the Nov 2013
3. to come back to the previous waypoint Give more importance the waypoint s name than to its number Speed limit Symbol V GPS checks the max speed blinks and rings and records if overspeed Symbol a DZ GPS checks the speed in the village 30 50 or 90 km h blinks and rings if overspeed It stops when the wpt FZ is passed Releasing code WPM Given by Iritrack calling Using it 1s penelized To turn masked wpts into visible wpts and give access to all navigation information concerning these wpts Odometer function ODO and OD Reset PARTIAL to O with RST Adjust TOTAL by and To reset PARTIAL to O Direct adjust of hundreds meters of TOTAL Automatic adjust at each Wpt message Adjust OK Nov 2013 Sentinel FUNCTION OF GPS UNIK II USER MANUAL Accident Overtaking You want to overtake press for a long time more than 2s on the push button to send a signal to the vehicle ahead If you breakdown or if you have a crash in a dangerous place after a turn or a dune press both blue keys simultaneously or red Alarm button you will send a signal to the competitors maximum 500m around regarding the ground To stop it press again both blue keys simultaneously or red Alarm button ess than 200m b Somebody wants to overtake you you hear Beep beep beeep Beep beep beeep Get ready to let the vehicle pass a s a p There is an accid
Download Pdf Manuals
Related Search