User Manual
Contents
1. the plus pole of the battery If the contact clip is positioned under the battery the remote control will not work O bserve that the contact clip is connected correctly to Risk of swallowing batteries The WATERPROOF IR remote control contains a coin type battery which can be swallowed Keep the battery out of reach of children at all times Dispose of batteries according to environmental directives 31 USING YOUR TOUCHPAD OPTIONAL Integrated into the glass or mirror surface the touch keypad provides a totally waterproof and vandalism resistant interface solution to control the basic functions of the screen and a set top box There are 3 different touchpad designs based on your type of product and functionality eoo SCREEN ON OFF Use the power key to toggle screen power between ON and STANDBY mode ADJUST THE VOLUME AND MUTE In order to adjust the sound volume of the screen please use the and keys The mute key will toggle between mute mode no sound and un mute mode restores last volume level SET TOP BOX CHANNEL UP DOWN Once your product is equipped with ad notam s set top box Optional use the up and down keys to control the channels 32 LIGHTING ON OFF Once your product is equipped with a lighting dimmer use the lighting key to toggle screen power between ON and OFF mode LIGHTING DIM UP DOWN Once your product is equipped with a lightin2. CH SETUP SLEEP ASPECT AUDIO PRESET Switching on off in ready operation Select signal input Select TV program directly e In the menu enter numbers Open close teletext e EPG Electronic program guide only e DTV channels Open close OSD menu e EXIT Switch between TV and radio Open close favorites list e GOTO e Previous channel In the menu cursor left decrease value In the menu cursor up OK confirm selection In the menu cursor down In the menu cursor right increase value In the menu color buttons 9 Increace volume Decreace volume INFO Channel information e Operation guide Mute sound on off Switch between TV channels up Switch between TV channels down e Media Player functions OSD menu of the DFU monitor system Sleeptimer Aspect ratio Select audio mode and audio track Dimmer on off Scene 1 on the Dimmer RCU 9 e functions used for ad notam Set Top Box solutions BATTERIES 1 2 3 4 5 6 7 8 9 TXT 0 EPG 1V R 3 e A Qo 4 ok A P a S uns FAN V INFO CH 8 o I SETUP 4 bl Q SLEEP ASPECT AUDIO PRESET ad notam e functions used for ad notam lighting solutions Please replace the batteries if your remote signal is weak Make sure that battery is inserted with the right polarity marking The battery cover needs to be completely closed in order to preserve the remote s waterproof capabilities
3. O O O O LEARN Learn individual commands SETUP TV R FAV 0 TDO O e In the menu color buttons SETUP OSD menu of the DFU monitor system SLEEP ASPECT AUDIO PRESET TV R Switch between TV and radio e FAV Open close favorites list e Dimmer on off 9 ad notam SLEEP Sleeptimer ASPECT Aspect ratio AUDIO select audio mode and audio track PRESET Scene 1 onthe Dimmer RCU e e functions used for ad notam Set Top Box solutions e functions used for ad notam lighting solutions BATTERIES Please replace the batteries if your remote signal is weak Make sure that battery is inserted with the right polarity marking The battery cover needs to be completely closed in order to preserve the remote s waterproof capabilities O bserve that the contact clip Risk of swallowing batteries The is connected correctly to WATERPROOF IR remote control the plus pole of the battery contains a coin type battery which can If the contact clip is Tr be swallowed Keep the battery out of positioned under the battery reach of children at all times Dispose of batteries the remote control will not work wur according to environmental directives HOW TO PROGRAM It is possible to program every single key except for the learn key itself of the learnable WATERPROOF IR remote control STEP 1 Place the WATERPROOF IR remote control learning and your external device remote control teaching head to head approximately 30c
4. near the product If liquids are spilt on or into the product disconnect it from the power outlet immediately Contact your authorized dealer immediately to have the product checked before use GLASS Parts of this product are made out of glass Handle with care to avoid injury or damage HANDLING Parts of this product are made out of glass and sharp material Always wear safety shoes and gloves when handling the products or its packaging HANDLING ad notam products are made of heavy components Two or more people may be needed to transport large goods When handling the goods make sure to separate and disconnects all parts before any movement Do not put stress on the LCD nor glass mirror Prepare the environment properly to gently accommodate any item on a adequately soft and cushioned surface GLASS The corners and edges of the glass are very delicate Take care that they do not hit the wall ceiling or floor in any way to avoid damages and split offs ELECTRICITY To avoid electric shock never touch the inside of this product Refer to a qualified technician ELECTRICITY Do not overload wall outlets extension cords or adaptors above their capacity since this can result in fire or electric shock ELECTRICITY Before you connect the product to the power outlet ensure that the power voltage matches the value printed on the back of the product Never connect the product to the power outlet if the voltage is different
5. ELECTRICITY To disconnect the product from the mains power the power plug of the product must be disconnected When disconnecting the power always pull the power plug never the cord Ensure that you have full access to the power plug power cord and outlet socket at all times IRREGULAR OPERATION If this product does not Operate normally in particular if there are any unusual sounds or smells coming out of it unplug it immediately and contact an authorized dealer or service center WET ENVIRONEMT For installations in wet rooms specific installation guidelines apply which are to be seen in the context of placing a power adaptor outside of certain protection zones These regulations differ by region Please contact a specialist for this In Germany electrical installations are to be performed by a skilled technician while observing the regulations of the standard DIN VDE 0100 T 701 INDOOR USE The product is specifically designed for indoor use There is danger of fire and of electric shocks and damage to the device if it is operated outdoors VENTILATION Never insert objects into nor cover the ventilation slots or other openings on the product HEAT SOURCES Do not place this product near or over heat sources or where it is exposed to direct sunlight Never expose your product remote control or batteries to excessive heat FLAMABLE GAS Do not use in the presence of flammable gas as this could result in explosion or fir
6. carer E DEI e cU UE t 32 ADIUSTINGW 0 URIDIGIFA LC LE Oxe K P a E E renee ten mere DU 33 SORHVARE S E DEO 34 COPYRIGHTS LICENCES S CERTIEIC A TES LT e te E E nae eaten ays 35 TROUBLESHOOTING E E Tenet E E tare 35 SERVICE LSS UEP Ri T A eet ene cae ence he D ances 35 SAFETY To prevent damage to your ad notam product or injury to yourself or to others read the safety instruction in their entirety before installing and operating the product Keep these safety instructions where all those who use the product will read them Warranty will be null and void for any damage resulting from installation and operation not respecting these instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION To reduce the risk of electric shock do not remove cover or back There are no user serviceable parts inside Refer all servicing to qualified personnel AN THIS ICON MARKS WARNING Indicates that high voltage is present inside It is dangerous to make any kind of contact with any internal part of this product N THIS ICON MARKS WARNING Indicates important literature concerning operation and maintenance To prevent possible injury read all warning before using this product AN su ICON MARKS CAUTION To prevent the spread of fire keep candles or other open flames away from this product at all times WARNINGS A LIQUIDS Never expose the product to rain or water Never place liquid containers such as vases
7. color temperature choose from cool medium or warm OSD NAVIGATION The up down left and right keys are used in order to navigate within the OSD menu To change settings use the left and right keys To go back one step use the setup key To confirm use the OK key To close the OSD menu use the exit key 0 ure v n beo Learn o oO o Oo o o v CH V CH dar aret EI rei ad notam a Djia DISPLAY SETTINGS Display Settings 4 2 lt b HEN 8 SLEEP TIMER Determine a time span after that the screen should turn off automatically choose from off 15min 30min 45min 60min 90min or 120min BACKLIGHT Adjust the general brightness of the backlight choose from 20 up to 100 ASPECT RATIO Define the image aspect ratio choose from 16 9 4 3 Zoom 1 or Zoom 2 25 ON SCREEN DISPLAY OSD MENU SCREEN AUDIO SETTINGS Audio Settings SOUND MODE Define the sound mode according to your preferences choose from standard music movie sports or user In user mode the settings for bass and treble may be adjusted manually BALANCE Adjust the balance between the left and the right speaker choose from 50 totally left to 50 totally right BOOT VOLUME Define a volume range at startup when your screen is switched ON choose from last or user In user mode the startup volume level can be manually defined between 0 no sound up to 100 full volume level SPEAKER PROTECTION
8. edges of the glass are very delicate Take care that they do not hit the wall ceiling or floor in any way to avoid damages and split offs Please read the safety precautions before positioning the product Always use the Supplied wall brackets and parts Wall mounting this product requires special skills and should only be performed by qualified personnel Electrical connections are to be performed bya Skilled technician following local regulations Two people are required to lift and carry a product that weights more than 25kg or 55lbs ad notam does not guarantee the efficiency of screws and dowels delivered with this product Those may be replaced on site considering the construction environment type of wall product weight and positioning ad notam bears no responsibility for improper mounting or any mounting that results in accident or injury STEP 1 WALL PREPARATION 1 The following slides explain how to identify and mark the drilling points on the wall ad notam provides different mounting combinations Verify your own shop drawing page 6 Wall View Legend to identify your wall mounting option The column Art Description provides the description of the selected items necessary for your wall preparation Basic Model CC ce Te E o9 9 3L T hs mwemexce e 1 hs evene e h a 1 a Footnotes K1 Caution The xy middie posion of the Wall Metal Plate B80 36 OW
9. must be performed by qualified professionals respecting national regulations and standards ad notam products include heavy bulky and delicate items To prevent damages to your ad notam product or injury to yourself or to others prepare the installation environment properly CAUTIONS v ENVIRONMENT Clean the handling and installation environments properly before installation v v HANDLING Handling ease requires proper planning Verify size turning angles bumps and potential hurdles before handling v ENVIRONMENT ad notam mounting systems are v engineered for vertical use only Verify walls verticality and items vertical and horizontal alignment to prevent EXPERT TIPS v SCREEN PLACEMENT The ideal distance to watch your display is 3 times its screen size diagonal with the eyes leveled at the screen center Dont place the product under direct shining light EXTERNAL POWER ADAPTER External power adapters require a minimum air volume to avoid v overheating and proper long lasting operations Allow at least 10cm all around a 12V DC model or 20cm all around a 24V DC model serious injuries and product damage HANDLING Cushions the floor properly using soft anti slip mats near the handling areas Lay the items gently on these cushioned anti slip surfaces when needed HANDLING Tilt the mirror and DFU top to the wall with an adequate angle of incidence when resting EXTERNAL POWER ADAPTER Install the external pow
10. the crystal rear side and the monitor properly before proceeding em 4x J 6 Art Description MGS Mounting Bracket vo found Move to the next step Drive the bolts incl spring washers and plain washers half way into the injection nuts of both sides of the DFU casing 7 Art Description MGS Mounting Bracket vot found Move to the next step Let the monitors locking bolts slide into the mounting brackets v EXPERT TIPS Ensure during the installation whether the transparent image area of the glass is aligned to the monitor active area v EXPERT TIPS Ensure that the in built Monitor IR receiver is fully exposed to incoming IR signal verifying its alignment with the transparent IR window Any misalignment might result in disability to control your ad notam 8 Art Description MGS Mounting Bracket vo found Move to the next step Secure the monitor tightening the bolts if the screen active area is aligned to the crystal image area and there are only marginal gaps between the monitor and the mounting If there is a remarkable gap between the monitor and the MGS mounting bracket implicitly use the lock washers to fill the gap before tightening the bolts A Do not overtighten the bolts in order to avoid strains O vertightening the bolt might affect the self adhesive tape 16 MOUNTING YOUR AD NOTAM ON WALL MOUNTING FINAL ASSEMBLY Your own ad notam has been pre assembled according to your configurat
11. 1 g 0 cri MERI a sam iem PY oa a mH aur ad notam EIF imm 5 Hh Four ad notam TWA as ice ECT ditet PRESET LERF bt PRESET SWITCH ON OFF Make sure you plugged in the mains power on the back of your product or to the external power adapter before trying to switch ON Make sure your remote is equipped with batteries and that its LED indicator is lighting once a button is pressed Once power is applied to your screen it will first power to STANDBY mode and its front status LED will turn red Once turned ON the status LED will change color to green the boot logo will appear and the last selected INPUT SOURCE will be displayed Use you remote s power key to swith between ON and STANDBY mode SELECT SOURCE With the remote s source key you can open the on screen INPUT SOURCE list and switch to your desired source using the up and down cursor keys followed by the OK key In order to close the on screen INPUT SOURCE list without changing your current source please press the exit key N The INPUT SOURCE list will show only ENABLED inputs By factory default the USB input is DISABLED In order to have more info on how to enable and disable inputs please refer to the SETTINGS section in this manual ADJUST THE VOLUME AND MUTE In order to adjust the sound volume please use the volume up and volume down keys The mute key will toggle between mute mode no sound and un mute mode restores last volume level Once in mute mod
12. 200 600 O ptional O ptional O ptional O ptional se yO VDC EXTENSION HDMI CABLE USB CABLE POWER CORD Extension Cable 12 24 V O ptional MOUNTING YOURAD NOTAM BEFORE YOU START Safety environment expert tips SAFETY WARNINGS A SAFETY To prevent damage to your ad notam product or injury to yourself or to others read the safety instruction in their entirety before installing and operating the product Keep these safety instructions where all those who use the product will read them A Warranty will be null and void for any damage resulting from installation and operation not respecting these instructions A ORIGINAL MATERIAL Always use ad notam supplied A wall brackets and original spare parts to perform installation A WOODEN CRATE The wooden crate is securing glass A and mirror Incline the wooden crate adding a thick spacer eg 10 cm wooden bar underneath the front ENVIRONMENT foot to avoid all glass and mirror to fall off the crate while removing the front panel Open carefully making sure a second person is on site WALL FIXINGS ad notam doesnt provide screws and dowels with this product Consider the construction environment wall type product weight and positioning when selecting raw bolts or resin anchors QUALIFIED PERSONNEL Mounting this product requires structural measures and special skills Refer exclusively to qualified personnel QUALIFIED PERSONNEL Electrical connections
13. ATION MAGNET wot found Move to the next step Gently bring the top part of the crystal in vertical position the magnets will pull and hold the crystal providing additional support EXPERT TIPS Ensure during the installation whether the transparent image area of the glass is aligned to the monitor active area EXPERT TIPS Ensure that the in built monitor IR receiver is fully exposed to incoming IR signal verifying its alignment with the transparent IR window Any misalignment might result in disability to control your ad notam 19 HIGHLIGHTS SUGGESTED SETTINGS INSTANT ON Your ad notam screen will power ON OFF within 1 second All screen settings are done via the on screen display OSD menu Access this menu selecting the SETUP key Scroll down and select Service Settings Position Boot Power Option to Instant v EXPERT TIPS Use this setting when connecting a single play out unit to your device INPUT SCAN Your ad notam screen will automatically power ON OFF depending from incoming signals from your play out units DeJactivate the automatic scan of the input ports for a valid video signal Once there is no video signal at the currently selected input port the screen will search for a video signal on the other ports by the following sequence HDMI 1 HDMI 2 HDMI 1 and so on See also SIGNAL LOSS TIMER All screen settings are done via the on screen display OSD menu Access this menu se
14. DIO IN L R Used with the COMPONENT IN port AUDIO OUT not available for all models Use this output to connect an external audio power amplifier or amplified loudspeakers This output is working in parallel with the speaker out port and follows the screens volume level changes SPEAKER OUT Two external speakers can be connected to the SPEAKER OUT port using speaker cables Please make sure your speakers impedance is 8 Ohm and the and wiring is correct CONNECT YOUR PRODUCT v EXPERT TIPS Disconnect the mains power before connecting any of the inputs below EXTERNAL CONTROL IR IN An external IR receiver might be needed in some applications Once needed please connect it to the IR In port IR OUT2 LED An external IR emitter might be needed in some applications This output will loop through all IR signal received by the built in IR receiver and will allow controlling external devices Once needed please connect it to the IR out LED port Connection Diagram m Connection Diagram M LED T Signal _ tt i 5V R GND 2 Signal GND 3 GND A When an external IR Receiver is N Use this port once the external device is connected to the IR In port the screen s equipped with an IR Input socket Due to built in IR receiver is disabled Use only lack of standard for IR cable connection the IR receiver supplied with your please consult with your external device product Using other IR receiver may provider for compati
15. De activate the speaker protection that limits a quick increase in volume to be passed on to the speaker output port in order to prevent damages to the speakers SCREEN OSD SETTINGS OSD Settings OSD LANGUAGE Define the OSD menu language choose from English Espanol Francais Deutsch Portugu s Italian OSD TRAN PARENCY Set the transparency of the OSD menu choose from 0 25 50 or 7596 OSD TIME OUT Determine a time span after that the OSD menu fades out automatically choose from 15s 30s 60s or 180s 26 SCREEN SETUP SETTINGS Setup Settings DFU Kiodel Model Humber Firrmware Version Version Number SAVE CURRENT SETTINGS TO USB Transfer your individual device settings to a USB stick Connect a USB stick to the corresponding input of the Screen Select save current settings to USB and confirm Save settings with Yes LOAD SETTINGS FROM USB Load previously saved device settings from a USB stick Connect a USB stick to the corresponding input of the Screen Select Load Settings from USB and confirm Overwrite existing settings with Yes This will discard your current settings SOFTWARE UPDATE Use this feature in order to update the screen s software firmware version via a connected USB flash drive N Please make sure that the software file on the USB flash drive is the correct version for your screen Please notice that every screen size has dedicated software file Once there is no USB flash d
16. MS is referred to the glass top left point Weight 27KG Depth 41mm 2 Reference point Identify your ad notam position on the wall and identify the bottom left corner of the crystal Mark this point with the pencil 3 Reference point Point 0 is used in the ad notam shop drawing Wall View Legend Page 6 The items reference coordinates are starting from here 4 Art Description Verify your own configuration page 6 Wall View Legend to identify your mounting option The column provides the description of the selected items necessary for your wall preparation 5 Art Description IN WALL BRACKET Wot found Move to the next step Verify x position and y position These coordinates correspond to the IN WALL BRACKET bottom left corner Start from the reference point moving to the right on the horizontal axe and mark the point y position EXPERT TIPS Before proceeding consider your crystal position For recessed installation the drilling points must be positioned at 30 mm from the back of your crystal 25 mm for IN WALL BRACKET 150 15 cm width For flush installation consider Glass Depth 30 mm 25 mm for IN WALL BRACKET 150 15 cm width Marginal inaccuracy can be corrected with the long slots in the IN WALL BRACKET 6 Art Description IN WALL BRACKET wot found Move to the next step Position the IN WALL BRACKET and mark the drilling points with a pencil Caution you might have more IN WALL BRACKET
17. OPYRIGHTS LICENCES TROUBLESHOOTING amp CERTIFICATES To solve any ad notam product related problem you can ad n otam consult our online support You can select your language and enter your product model number MAG IC Go to www ad notam com MIRROR IMAGE MIE 2 71227 ad notam MIRROR IMAGE and MAGIC MIRROR SERVICE amp SUPPORT are licensed trademarks of ad notam HOM PE Warranty terms apply N E OES Damaged goods terms apply RMA procedure terms apply HDMI the HDMI logo and high definition multimedia D interface are trademarks of HDMI Licensing LLC For more detailed info please visit our website at www ad notam com This product parts components and the assembly are protected by or might be part of one or more of the following intellectual property rights US 7455412 B2 eee CONTACT INFORMATION EP 1429308 B2 n AE EP 1809828 B1 ad notam AG EU C 5 www ad notam com Certified ad notam 35 Copyright 2015 by ad notam All Rights Reserved This Manual as a whole in part or excepts may not be reproduced copied stored in data retrieval system or transferred electronically mechanically or in any other way shape or form without prior written authorization by ad notam Specifications of the ad notam products are subject to unannounced changes This manual may thus not reflect the current technical status of ad notam s product
18. ad notam HIDDEN TECHNOLOGY TECHNOLOGY BECOMES INVISIBLE ci e uet e INSERT Register your product and get support at www ad notam com Subject to modification 30 Apr 2015 www ad notam com INTRODUCTION Thank you for choosing ad notam You acquired a high quality product ad notam means supreme technology and design CONTENT SAFE T E UU NUTUS MUN EE 5 WARNINIG SSE E D tee eeeys 4 CLEANING ANDPRODJUGCTC ARE S E E EUST EU E tera S 5 ENVIRONMENTAL T E S E A a oa em 5 ADINOTAM CONEIGURATOR TE UD EU E C tate 6 PROD Cis DE EI ERY Senn E E amas Semmens 7 MEGUDNADINGOSCOURADIOTAMMMM ZZ 1i ii lCco E A E E E eee 8 INEWACLC MOUNTING GWAEL RRE DRACO E E S RU EE E E AER EE 9 NSW ALEM OUN TIN GYM NATO MC E E E A E E E 14 INFWACCMOUNTIN GE TRINALASSEM BI Y NH LL M EM E E ME tea eee 17 HiGEIBIGEITSSUGGESTEDISETITINGSSEEM A LA Loose E A E TT VERTS 20 CONNECT YO WRAP RO BC TE a E seen me eres ee 21 POWE a E A E E E E E A air 21 ZUDEM args E er er E m IRURE A 22 EXTERNA RCONTKO M a ER E UE UE A eee Aa 2 WS Ee UES REENA E E a cane on N rer 24 ON SEREENEDISPLA YAO SDIMEN U ML S SZ Z Loc ue e A E aes are eee 25 SERWVICESSETDINGOSMEEMMMMMM SS So ll lbU 95 Ol il hh E nse ee mene o eae 27 USING Y OUR WATERPROORHREMOTE CONTRO CSR cc E E E S 29 HOW TORO GRAN MSS SS E E E E ue m MU a E E 30 USIN GOUR SEIMEBEINETENONECONTBROEEEEMLL A A UE UA 31 USING OUR TOUCHPAD SII o a eu M e ey
19. bility before making damage your product any connection RS232 The RS232 port can be used by external devices eg home automation IR commands through all IR signal received by the built in IR received by in built IR receiver generate a receiver and will allow controlling external feedback string for RS 232 RS232 devices Once needed please connect it to the default baud rate is 34800 For more info visit IR out CABLE port our website at www ad notam com IR OUT 1 CABLE An external IR emitter might be needed in some applications This output will loop DC OUT 5V 12V not available in all models TRS mm Connection Diagram Use this output to feed DC power to SINGLE E T T not used T external playout devices DTB IPTV etc R sig nal R N Use on screen display OSD menu S GND G SERVICE SETTINGS in order to de activate this port N Use this port once the external device is N The DC OUT port is designed to be used equipped with an IR receiver Locate its with SINGLE playout device Never position and attach the IR emitter in front connect more than one device of it Use only the IR emitter supplied with your product Using other IR emitter N The DC OUT port will feed 5VDC or may damage your product 12VDC device with 2A MAX Never connect a device whose power input differs from the above specifications 23 USE YOUR SCREEN E 4 5 6 th D art V um wn d F lara Bara LEARE f m J Hri T
20. ces and aggressive active substances may not be stored in the proximity of this product ad notam aims to design produce deliver and dispose eco friendly products Our environmental policy applies to the entire product lifecycle and business activities LOW STANDBY POWER Our highly advanced power circuitry brings down power consumption to an extremely low level while in standby mode EUROPEAN ENERGY LABEL L END OF USE The European Energy Label informs you on the energy efficiency class of this product The greener the energy efficiency class of this product is the lower the energy it consumes On the label you can find the energy efficiency class the average power consumption of this product in use and the average energy consumption for 1 year based on 4 hours operations per day When this crossed out wheeled bin symbol is attached to a product the product is covered by the European Directive 2002 96 EC Inform yourself about the local separate collection system for electrical and electronic products Act according to your local rules and do not dispose your old products with your normal household waste Correct disposal of the product helps to prevent potential negative consequences for the environment and human health AD NOTAM CONFIGURATOR Your own unique product made by ad notam has been designed with ad notam online configurator Your configuration is a valuable reference Keep a hardcopy of your c
21. del Y HANDLING Cushions the floor properly using soft anti slip mats near the handling areas Lay the items gently on these cushioned anti slip surfaces when needed HANDLING Tilt the mirror and DFU top to the wall with an adequate angle of incidence when resting EXTERNAL POWER ADAPTER Install the external power adapter in accessible service friendly location if you require extension cables refer to your ad notam specialist Install the external power adapter on a steady flat surface do not hang nor cover ELECTRICITY Do not overload wall outlets extension cords or adaptors above their capacity since this can result in fire or electric shock ELECTRICITY Before you connect the product to the power outlet ensure that the power voltage matches the value printed on the back of the product Never connect the product to the power outlet if the voltage is different 1 You prepared the wall marking the points installed the necessary items tested and secured the monitor After cleaning the installation environment you can proceed with the final assembly 4 ad notam MIRROR Image Screen 13 3 84 0 diagonal 2 External power supply low voltage DC 12V 24V 3 Mounting system to install the glass or mirror 3a in wall or 3b on wall 4 Control options 4a Slimline remote control 4b Waterproof remote control amp 4c Touch Pad 5 Loudspeaker options 5a Ceiling or wall speakers 5b Invisible
22. ds or adaptors above their capacity since this can anti slip mats near the handling areas Lay the items result in fire or electric shock gently on these cushioned anti slip surfaces when needed v ELECTRICITY Before you connect the product to the power outlet ensure that the power voltage matches v HANDLING Tilt the mirror and DFU top to the wall the value printed on the back of the product Never with an adequate angle of incidence when resting connect the product to the power outlet if the voltage is different 2 You prepared the wall marking the point and pre installing the necessary items After cleaning the installation environment you can proceed with the monitor test and installation 4 ad notam MIRROR Image Screen 13 3 84 0 diagonal 45 74 24 7 Design elements logos fixture cutouts A 9 Dimmer 2 External power supply i low voltage DC 12V 24V 9 LED Digital Clock 3 Mounting system 40 Glass or Mirror surface to install the glass or mirror Crystal Mirror 3a in wall or 3b on wall 41 Screen Orientation 4 Control options horizontal 4a Slimline remote control 4b Waterproof remote control amp 4c Touch Pad 12 Bevel 30mm 1 1 8 i 13 Mirror Defogger 5 Loudspeaker options 5a Ceiling or wall speakers 44 Glass or Mirror Shape 5b Invisible glass speakers Rectangle 6 Lighting integration Lighting power adapter v EXPERT TIPS Before proceeding with the monitor handling evaluate your
23. e CHILDREN Keep out of reach of children Failure to observe this precaution could result in injury CLEANING AND PRODUCT CARE CLEANING Use a soft damp cloth cotton flannel etc and gently wipe the surface of the product Wiping witha hard cloth or using strong force may scratch the surface of the product Never touch push rub or strike the screen with any object CLEANING Avoid using benzene thinner and other solvents as they may deform the product and may cause the paint to peel off Using a chemical cloth wet dry sheet type cloth etc may cause damages and corrode the product To avoid deformation and color fading wipe off water drops as soon as possible OPERATION Avoid static images on screen as much as possible Static images are images that remain onscreen for extended periods of time Static images include onscreen ENVIRONMENTAL menus black bars time displays etc If you must use static images reduce screen s contrast and brightness to avoid screen damage ENVIRONMENT On rare occasions depending on temperature and humidity minor condensation can occur on the inside of the glass front To prevent this do not expose the product to direct sunlight heat or extreme humidity If condensation occurs it will disappear spontaneously after the product has played for a few hours ENVIRONMENT The product must be stored in a dry and well ventilated room without extreme temperature fluctuations Heat sour
24. e amute icon will be displayed on screen SCREEN SLEEP TIMER With the sleep timer you can set the screen to switch to STANDBY automatically after a preset time To set the sleep timer press the sleep key to toggle between the following presets OFF 15min 30min 45min 60min 90 min and 120min You can always switch off your screen earlier during the timer countdown CHANGE IMAGE FORMAT Adjust the image format to suit your preference using the aspect button The aspect ratio presets are 16 9 4 3 Zoom1 and Zoom2 16 9 4 3 16 9 16 9 2 Zoom Zinn USB MEDIA PLAYBACK The playback keys are used to control the media player assigned to the USB port Those keys are available only in our SLIMLINE IR REMOTE model 24 ON SCREEN DISPLAY OSD MENU ON SCREEN DISPLAY OSD MENU All screen settings are done via the on screen display OSD menu To access this menu please use the setup key The OSD menu includes settings for Image Display Audio OSD Setup and Service 4 ae Lo bvo er v kack LELARA a gt E O o E ll ser ater eu rem ad notam ad notam SCREEN IMAGE SETTINGS Image Settings q Ls q 4 PICTURE MODE Define the picture mode choose from standard dynamic mild or user In user mode the settings for brightness contrast saturation and sharpness may be adjusted manually NOISE REDUCTION Define the noise reduction choose from off low medium or high COLOR TEMPERATURE Define the
25. el Measure and mark the drilling point on this line accordingly y position Caution you must have 4 HOLDING ANGLES Repeat the procedure for each one of them EXPERT TIPS Before proceeding verify the point horizontal alignment using the level You can also plot an additional horizontal line and verify its distance from the crystal upper and bottom edge 11 STEP 2 WALL PREPARATION 1 The following paragraphs explain how to mount the different elements on the wall ad notam provides different mounting combinations Verify your own shop drawing page 6 Wall View Legend to identify your wall mounting option The column Art Ref provides the description of the selected items necessary for your wall preparation ARCHITECTURAL Structural measures must be v ENVIRONMENT ad notam mounting systems are accomplished for an on wall installation ad notam engineered for vertical use only Verify walls verticality declines any liability for the screws and screw anchors and items vertical and horizontal alignment to prevent used on site serious injuries and product damage You marked all drilling points on the wall Drill at the marks and proceed adding the appropriate screw anchors Art Description Verify your own configuration page 6 Wall View Legend to identify your mounting option The column provides the description of the selected items necessary for your wall preparation Art Description PLASTIC SPACERS wot found M
26. er adapter in accessible service friendly location if you require extension cables refer to your ad notam specialist Install the external power adapter on a steady flat surface do not hang nor cover TOOLS ad notam products installation requires specific professional tools Verify the following page for a comprehensive list MOUNTING YOUR AD NOTAM ON WALL MOUNTING WALL PREPARATION Your own ad notam has been pre assembled according to your configuration instruction The product back view including pre assembled items Is visible on your shop drawing Page 3 Back View you can find additional information on the visible items on page 4 Legend Back View To determine the proper position of your ad notam on the wall the ad notam configuration provides an ideal Wall View preparation The Wall View including necessary items is visible on shop drawing page 5 Wall View Consult your shop drawing page 6 Legend Wall View for additional information concerning spare parts necessary for installation Refer to these pages during installation v EXPERT TIPS TOOLS a MAGNET HOLDER IN WALL BRACKET HOLDING ANGLE FIXATION MAGNET DISTANCE RING PLATE Optional O ptional O ptional O ptional O ptional Measuring tape Carpenter Pencil Level Screwdriver Set Philips Tip Bolts screws screw Allen Wrench Power drill Ratchet anchors lock Washers 1 drive for M 4 6 Bolts 2 4 Please Note INO The corners and
27. g dimmer use the lighting and keys to set the lighting brightness A short touch will change the brightness in one step while a long touch will change the brightness continuously till your release ADJ USTING YOUR DIGITAL CLOCK OPTIONAL The digital clock features bright white LED digit design and can be combined with any of the ad notam glass and mirror options for a cool complete glowing look A backup battery provides power to the digital clock when the primary source of power Is interrupted or unavailable SETTING TIME FORMAT 12H 24H DISPLAY ON OFF Use the power esc key to toggle the clocks display ee can oles the as TUER NEUE ns hours Sue 2 between ON and OFF mode ours display To do so please follow the following steps STEP 1 Press the edit key to enter the format setting mode SETTING TIME USING NUMERIC KEYS You can set the time of the digital clock by using the numeric keys on the remote To do so please follow the following steps STEP 2 STEP 1 Press the up or down keys to change the time format Press the time key to enter the time setting mode display STEP 2 Press the numeric keys in a sequence representing the desired time For example to set the clock to 14 35 please press the numeric keys in the following order 1 4 3 and 5 STEP 3 Press the enter key to confirm your changes and exit format setting mode In order to exit the time setting mode at any time WITHOUT savi
28. glass speakers 6 Lighting integration 72 7 Design elements logos fixture cutouts A 8 Dimmer 9 LED Digital Clock 40 Glass or Mirror surface Crystal Mirror 11 Screen Orientation horizontal zr 12 Bevel 30mm 1 1 8 M 13 Mirror Defogger 44 Glass or Mirror Shape Rectangle Lighting power adapter v EXPERT TIPS Before proceeding with the final assembly evaluate your installation requirements Your own unique ad notam has been pre assembled at factory and additional items wiring and connections need to be prepared on site Evaluate your handling clearance considering cables length and connections Cushion the handling area properly using soft anti slip mats Lay the items gently on these cushioned anti slip surfaces when needed 2 Art Description Verify your own shop drawing page 6 Wall View Legend and shop drawing page 4 Back View Legend to identify your final assembly option The column Art Description provides the description of the selected items necessary for your installation v EXPERT TIPS Clean the crystal rear side and the monitor properly before proceeding 18 Art Description SELF ADHESIVE METAL PLATE vot found Move to the next step The SELF ADHESIVE METAL PLATE counterpart for IN WALL BRACKET is pre mounted to the back side of the glass Use the suction cups to elevate the crystal in order to secure the slide in mechanism at the bottom of the crystal Art Description FIX
29. his feature to feed DC power to SINGLE external playout devices DTB IPTV etc Select Follow DFU to provide 5V or 12V to your external playout device A Uses on screen display OSD menu SERVICE SETTINGS in order to de activate this port N The DC OUT port is designed to be used with SINGLE playout device Never connect more than one device N The DC OUT port will feed 5VDC 12VDC device having 2A MAX Never connect a device that uses power that differs from the above specifications USB AUTO PLAY Use this feature to play your movie automatically when restarting the screen FACTORY RESET This will restore all screen settings to the factory default settings USING YOUR WATERPROOF IR REMOTE CONTROL Switching on off in ready operation e Select signal input Digits 0 9 Select TV program directly e In the menu enter numbers CH Switch between TV channels up e CH Switch between TV channels down 2 V Increase volume 1 2 3 E V Decrease volume TXT Open close teletext 4 5 6 CH EPG Electronic program guide only DTV channels e MENU Open close OSD menu e In the menu cursor up GOTO GOTO e O Ec MEL oe Mute sound on off HT A GOTO d In the menu cursor left decrease values OK OK confirm selection lt OK p INFO In the menu cursor right increase values INFO Channel information Operation guide e EXIT v BACK LEARN EXIT EXIT In the menu cursor down BACK Previous channel
30. initely or until a signal is present again VOLUME LIMIT Determine the maximum volume level value choose from value 0 no sound up to 100 full volume level 2 SERVICE SETTINGS Service Settings A A A A A i YTrfF YTf T INPUT HDMI 1 INPUT HDMI2 INPUT HDMI 3 INPUT COMPONENT INPUT VGA IN PUT USB Enables or disables the selected input port Once an input port is set OFF it will not be accessible in the INPUT SOURCE list activated by the source key Please notice that if the USB input port is set OFF it will not affect the software update functionality as it is always possible service Settings q a Ld q Ld HDMI CEC DeJactivate the HDMI CEC functionality of the screen Watch the device list of connected compatible devices and de activate the auto standby function RS232 ACCESS DeJactivate the RS 232 functionality With RS 232 communication the screen can be integrated with external systems like home automation control system building management control systems or hospitality TV systems For more information regarding the RS232 protocol for this product please visit our website at www ad notam com 28 BAUD RATE Set the screen s RS232 communication baud rate to your preferred value choose from 9600 19200 or38400 By default the baud rate is 38400 CHANGE PASSWORD Use this feature to change the password allowing access to the SERVICE SETTINGS menu pages DC OUTPUT Use t
31. installation requirement Your own unique ad notam has been pre assembled at factory and additional items wiring and connections need to be prepared on site Evaluate your handling clearance considering cables lengths and connections Cushion the handling area properly using soft anti slip mats Lay the items gently on these cushioned anti slip surfaces when needed 3 Art Description Verify your own shop drawing page 6 Wall View Legend and shop drawing page 4 Back View Legend to identify your monitor mounting option The column Art Description provides the description of the selected items necessary for your installation 15 4 Art Description HOLDING ANGLE wot found Move to the next step Drive the bolts incl spring washers and washers half way into the injection nuts of both sides of the DFU casing Secure the 2 top holding angles at the injection nuts of the DFU 5 Art Description HOLDING ANGLE wot found Move to the next step Lift your ad notam monitor and place it on the lower HOLDING ANGLES so that the injection nuts on the bottom are aligned with the holes in the HOLDING ANGLE The holes in the upper HOLDING ANGLES should be aligned with the screw anchors Marginal inaccuracy can be corrected with the long slots in the HOLDING ANGLES Secure the 2 top HOLDING ANGLES firmly v EXPERT TIPS The ad notam monitor can now be affixed with the connection plugs face up to the rear side of the crystal surface Clean
32. ion instruction The product back view including pre assembled items Is visible on your shop drawing Page 3 Back View you can find additional information on the visible items on page 4 Legend Back View The product Wall View is visible on shop drawing page 5 Wall View Consult your shop drawing page 6 Legend Wall View for additional information concerning spare parts necessary for installation Refer to these pages during installation v EXPERT TIPS TOOLS 27 ANS a Ne Glass Suction Cups 13 STEP 4 FINAL ASSEMBLY The following paragraphs explain how to identify mount and secure your ad notam to the wall ad notam provides different mounting combinations Verify your own shop drawing page 6 Wall View Legend and shop drawing page 4 Back View Legend to identify your monitor mounting option The column Art Description provides the description of the selected items necessary for your installation v ENVIRONMENT ad notam mounting systems are engineered for vertical use only Verify walls verticality and items vertical and horizontal alignment to prevent serious injuries and product damage v ENVIRONMENT Clean the handling and installation environments properly before installation v EXTERNAL POWER ADAPTER External power adapters require a minimum air volume to avoid overheating and proper long lasting operations Allow at least 10cm all around a 12V DC model or 20cm all around a 24V DC mo
33. lecting the SETUP key Scroll down and select Service Settings Make sure that Signal Loss Timer is deactivated v EXPERT TIPS Use this setting when connecting more play out units to your device BACKLIGHT Your ad notam screens backlight is set to guarantee a satisfactory brightness in an optimal environment You can adjust the general brightness of the backlight choosing in a range from 20 up to 100 Access this menu selecting the set up key Scroll down and select Display Settings Adjust your backlight according to your personal taste 20 USB amp MEDIA PLAYER Watch your photos listen to your music play your movies and read your documents Save a movie clip on a USB and connect it to the USB Input of the screen Access this menu selecting the SOURCE key Scroll down and select USB Choose between PHOTO MUSIC MOVIE and TEXT according to the file you aim to open Scroll with the cursor and select your file To return press the EXIT key or press OK on selecting the RETURN icon While viewing your files access the toolbar pressing the OK key MOVIE File Extension Video Audio avi Dvix XviD M PEG 4 mpg M PEG 1 2 dat MPEG 1 mov mkv H 264 MP3 WMA AAC MUSIC File Extension mp3 wma m4a aac PHOTO Video Progressive J PEG Baseline J PEG BMP Non Interlaced Interlaced File Extension Jpg J peg bmp png USB AUTO PLAY Your ad notam screen will pla
34. ly linked and show respectively visualization and legend art Act Ret Art Description Unit Quantity wah Height Depth Diameter x Position y Position Basic Mosel ENLDUDTI au wat Loer Pate se OWS Shop Drawing Wall View Legend Wall View These 2 pages are directly linked and show respectively visualization and legend Shop Drawing Parts Lists These pages are directly linked and show complete scope of delivery items and processing services PRODUCT DELIVERY WOODEN CRATE AND GIFTBOX INSPECTION You purchased a high end device Verify wooden crate and gift box integrity before unloading the product If damage is noticed write all the information on the bill of lading and hand it to the driver of the forwarder Pictures will be required for the claim process You can consult your ad notam reseller for additional information GIFTBOX WOODEN CRATE WHAT IS IN THE BOX Please check the following contents for completeness before using the product MIRROR TV ES VN NS OWNERS MANUAL DFU xxxx WATERPROOF SLIM LIN E DIGITAL CLOCK DISPLAY IR REMOTE O ptional IR REMOTE O ptional IR REMOTE Optional MAGNET HOLDER IN WALL BRACKET HOLDING ANGLE FIXATION MAGNET DISTANCE RING PLATE Optional O ptional O ptional O ptional O ptional MIRROR POWER CEILING SPEAKERS IR RECEIVER IR LOOP THROUGH IR EMITTER Power Supply
35. m apart as shown below STEP 2 To enter the learn mode press and hold the learn key until the LED indicator lights constantly Please note With no action for more than 30 seconds the remote control will exit learn mode automatically STEP 3 Press and release a key you wish to program on the learnable WATERPROOF IR remote The LED indicator will still light constantly STEP 4 Press and release a key you want to capture on the teaching remote The LED indicator will start to blink slowly indicating the IR command has been captured STEP 5 To save this IR code press and release the key you ve just choose to program on the learning remote The LED indicator will blink fast and then light constantly to indicate this IR code has been saved STEP 6 To program more keys please repeat steps 3 5 while in learn mode STEP 7 To exit learn mode please press and release the learn key again The LED indicator will turn off 30 RESET THE REMOTE In order to reset all keys to ad notam factory default IR commands please follow the next steps STEP 1 Press and hold the learn and power keys simultaneously until the LED indicator lights constantly STEP 2 Enter the code 999 by Press and release the numeric 9 key three times The LED indicator will turn off and the remote control has been reset to the initial IR codes USING YOUR SUMUNE IR REMOTE CONTROL E2 Digits 0 9 TXT MENU EXIT TV R FAV GOTO BACK CH
36. n booting IR ADDRESS CODE In order to control a single screen in a multi screen installation both the screen and the IR REMOTE are needed to be set up for a dedicated IR address otherwise a single remote will affect all screens You can set a unique IR address code for the screen according to your preferences choose from value of 0 up to 254 The default master IR address code is 0 To set an IR address on a Waterproof IR Remote please press and hold both learn and power keys simultaneously until the remote s LED indicator lights constantly While the LED indicator lights constantly press and release a sequence of 3 numeric keys matching your new IR address address codes 000 to 254 are available CH CH MERU ih GOTO ur EXIT Y BACK INPUT SCAN De activate the automatically scan of the input ports for a valid video signal Once there is no video signal at the currently selected input port the screen will search for a video signal on the other ports by the following sequence HDMI 1 HDMI 2 HDMI 3 Component HDMI 1 and so on See also SIGNAL LOSS TIMER SIGNAL LOSS TIMER Set a time span for how long the input scan should be performed once a video signal is not present on current selected input port Choose from 5s 10s 30s 60s or120s The screen will switch to STANDBY mode if no video signal is present within the chosen time If signal loss timer is set OFF the search will continue indef
37. nd fully inserted Insert the power cable into the MAINS socket of the external power adapter Make sure the power cable is securely and fully inserted on both sides Make sure that the power plug in the wall socket is accessible at all times When disconnecting the power cable always pull the plug never the cable CONNECT YOUR PRODUCT v EXPERT TIPS Disconnect the mains power before connecting any of the inputs below AUDIO VIDEO HDMI 1 2 3 HDMI has the best picture and sound quality HDMI combines video and audio signals for High Definition HD signals For best signal quality transfer use a high speed HDMI cable not longer than 5m COMPONENT IN Y PB PR Component Video YPbPr is a high quality connection The YPbPr connection can be used for High Definition HD signals For sound please use the LIN E AUDIO Input port USB You can view photos or play your music and videos from a connected USB flash drive Insert a USB flash drive into the USB port of your product and select the USB input N To access the USB port after installation it is highly recommended to install a USB EXTENSION CABLE N The USB input is DISABLED by default Use On Screen Display OSD menu SERVICE SETTIN GS in order to activate it 22 VGA IN not available for all models VGA is an analog video connection for PCs and laptops Do not use for Full High Definition signals Combine sound using LIN E AUDIO input port AU
38. ng your changes please press the power esc key 33 SOFTWARE Setup Settings DFU Model Model Number Firmware Version aversion Number w ww Ww Y SOFTWARE VERSION To view the current screen software version press setup and move down to Setup Settings page SOFTWARE UPDATE To update the current screen software version please perform the following steps 34 STEP 1 Check your firmware version in the OSD menu in Setup Settings Firmware Version The screen model and firmware version info indicate the name of the device and the version of the installed firmware STEP 2 Download the current firmware version for your screen from our website at www ad notam com STEP 3 Save the current firmware version file on an empty USB flash driver N Please make sure that the software file on the USB flash drive is the correct version for your screen Please notice that every screen size has a different software file STEP 4 Connect the USB flash drive to the USB socket In the OSD menu gt Setup Settings please select Software Update The confirmation window will be presented as below Are you sure to update software STEP 5 Choose Yesto start the Firmware Update process The update progress window will be presented on screen Software Update USB 11 STEP 6 Check if the new firmware version is correctly shown in the Setup Settings page STEP 7 IMPORTANT Disconnect the USB flash drive C
39. of the DFU casing Secure the 2 top holding angles at the injection nuts of the DFU casing 12 HOLDING ANGLE wot found Move to the next step Lift your ad notam monitor and place it on the lower HOLDING ANGLES so that the injection nuts on the bottom are aligned with the holes in the HOLDING ANGLE The holes in the upper HOLDING ANGLES should be aligned with the screw anchors Marginal inaccuracy can be corrected with the long slots in the HOLDING ANGLES Secure the 2 top HOLDING ANGLES firmly 13 MOUNTING YOURAD NOTAM ON WALL MOUNTING MONITOR Your own ad notam has been pre assembled according to your configuration instruction The product back view including pre assembled items Is visible on your shop drawing Page 3 Back View you can find additional information on the visible items on page 4 Legend Back View The product Wall View is visible on shop drawing page 5 Wall View Consult your shop drawing page 6 Legend Wall View for additional information concerning spare parts necessary for installation Refer to these pages during installation v EXPERT TIPS TOOLS NA S o 6 v v DFU xxxx WATERPROOF SLIMLINE DIGITAL CLOCK HOLDING ANGLE DISPLAY IR REMOTE Optional IR REMOTE Optional IR REMOTE Optional O ptional CN O MIRROR POWER BOLTS M6 BOLTS M4 Screwdriver Set Ratchet Power Supply 200 600 O ptional O ptional Philips Tip Y drive for M 4 6 Bolts _ Allen Wrench Carpenter Pencil Measu
40. onfiguration with this owner manual Weight KG De 1 E ad notam CEPI n a T ogee serre Tv ae The Shop Drawing Front View is necessary for Mirrors and Glass production the most visible item of any device produced by ad notam The Front View consists of 2 pages ad notam m Weight 27KG Depth 41 dnotam SSeS Steen A St a e The Shop Drawing Back View is necessary for Mirrors Glass and additional articles pre assembly at factory The Back View consists of 2 pages Weight 27KG Depth odnolam SSS 5 is The Shop Drawing Wall View is necessary for device installation on site The Wall View consists of 2 pages TS a m Weight 27KG Depth 41 adnotam IRIS Eme E Waed Mrver TV 18619 I pnmmm m mn pr The Shop Drawing Parts List is a detailed articles list comprising all necessary parts for pre assembly and final installation The Parts List consists of 1 or more pages ae tm emt mn Queene e mm w teet a Cam saver amp osa C e uomo ednolam SeemmE ILE ques Shop Drawing Front View Legend Front View These 2 pages are directly linked and show respectively visualization and legend rarr permen us ouem man naps toon mm t t oe i adnotam mm impon nash vid Shop Drawing Back View Legend Back View These 2 pages are direct
41. ove to the next step These items need to be combined with the IN WALL BRACKET for recessed installation flush to the wall Position the item below the IN WALL BRACKET before securing it Art Description IN WALL BRACKET wot found Move to the next step Secure the IN WALL BRACKET verifying screws anchors alignment before firmly locking the first screw Proceed with the other screws mirroring their position right and left Art Description MAGNET HOLDER PLATE Wot found Move to the next step Secure the MAGNET HOLDER PLATE verifying screws anchors alignment before firmly locking the first screw Proceed with the other screws mirroring their position on the right and left side Caution you might have more MAGNET HOLDER PLATE s Repeat the procedure for each one of them 12 10 Art Description HOLDING ANGLE Wot found Move to the next step The 4 HOLDING ANGLES hold the monitor on the wall while providing slight adjustment in order to align the monitor active area with the glass image area Marginal inaccuracy can be corrected with the long slots in the HOLDING ANGLES Secure the 2 bottom HOLDING ANGLES firmly as shown above v EXPERT TIPS Before proceeding with the 2 top HOLDING ANGLES read the screen mounting instruction for additional WARNING and EXPERT TIPS 11 HOLDING ANGLE Wot found Move to the next step Drive the bolts including spring washers and plain washers half way into the injection nuts of both sides
42. ring tape Level 14 STEP 3 MONITOR 1 The following paragraphs explain how to mount and connect your ad notam monitor ad notam provides different mounting combinations Verify your own shop drawing page 6 Wall View Legend and shop drawing page 4 Back View Legend to identify your monitor mounting option The column Art Description provides the description of the selected items necessary for your installation v ARCHITECTURAL Structural measures must be v EXTERNAL POWER ADAPTER External power accomplished for an on wall installation ad notam adapters require a minimum air volume to avoid declines any liability for the screws and screw anchors overheating and proper long lasting operations Allow used on site at least 10cm all around a 12V DC model or 20cm all around a 24V DC model v ENVIRONMENT ad notam mounting systems are engineered for vertical use only Verify walls verticality v EXTERNAL POWER ADAPTER Install the external and items vertical and horizontal alignment to prevent power adapter in accessible service friendly location if serious injuries and product damage you require extension cables refer to your ad notam specialist Install the external power adapter on a v ENVIRONMENT Clean the handling and installation steady flat surface do not hang nor cover environments properly before installation v ELECTRICITY Do not overload wall outlets extension v HANDLING Cushions the floor properly using soft cor
43. rive connected an error message will appear Cant detect USB A n order to have access to the USB port after installation it is highly recommended to install a USB EXTENSION CABLE SERVICE SETTINGS Service settings are password protected and normally should be used by an authorized technician only The SERVICE SETTINGS parameters are spread over multiple menu pages N The default password for the service settings menu is 1234 this may be modified within the SERVICE SETTINGS menu Please notice that the password digits should NOT be entered using the numeric keys on your remote control Please use up and down keys to change a digit followed by the OK key to confirm TV R MENU GOTO 4 P EXIT BACK FAV O O O Service Settings 4 4 gt a gt 4 a gt 4 4 BOOT POWER OPTION Determine the recovery power mode of the screen after a power interruption choose from Last Standby Power On or Instant OSD ACCESS DeJactivate the ability to see the OSD menu once setup key is used NEVER set this parameter to OFF unless you are provided with a special service password by ad notam A fthe OSD menu is set to OFF deactivated users will not be able to access the OSD menu anymore without a special service password This special service password will be provided by ad notam to an authorized technician only upon a written request START LOGO DeJactivate the ad notam start up logo that shows o
44. s Repeat the procedure for each one of them 10 v Art Description MAGNET HOLDER PLATE Wot found Move to the next step Verify x position and y position These coordinates correspond to the MAGNET HOLDER PLATE bottom left corner Identify the glass upper edge considering your glass height starting from your reference point From the upper edge left corner moving to the right on the horizontal axe identify the x position of the MAGNET HOLDER PLATE EXPERT TIPS Before proceeding consider your crystal position For recessed installation the drilling points must be positioned at 30 mm from the back of your crystal 25 mm for MAGNET HOLDER PLATE 150 15 cm width For flush installation consider Glass Depth 30 mm 25 mm for MAGNET HOLDER PLATE 150 15 cm width Marginal inaccuracy can be corrected with the long slots in the MAGNET HOLDER PLATE Art Description MAGNET HOLDER PLATE wot founa Move to the next step Position the MAGNET HOLDER PLATE and mark the drilling points with a pencil Caution you might have more MAGNET HOLDER PLATES Repeat the procedure for each one of them Art Description HOLDING ANGLE wot found Move to the next step Verify x position and y position These coordinates correspond to the HOLDING ANGLE middle screw drilling point Start from the reference point moving to the right on the horizontal axe and mark the point y position Plot a vertical line verifying vertical alignment using the lev
45. y your movie clip automatically when turning ON the device It can be combined with the instant on functionality All screen settings are done via the on screen display OSD menu Access this menu selecting the SETUP key Scroll down and select Service Settings Set USB Auto Play to On and exit the OSD v EXPERT TIPS Activate and select the USB Input in the OSD menu Read Service Settings in this manual for additional information CONNECT YOUR PRODUCT POWER LUSTER TERMINAL AND OPEN ENDED POWER CORD N This type of electrical connections has to be performed by a skilled technician only following local electrical and safety regulations M ake sure that each product s electrical component such as screen heating foil and lighting have its own main circuit Avoid connecting them to the same mains circuit e blue Neutral 2 yellow green Earth e brown Live POWER CABLE Insert the power cable into the AC socket of the product Make sure the power cable is securely and fully inserted Make sure that the power plug in the wall socket is accessible at all times When disconnecting the power cable always pull the plug never the cable 21 SCREEN EXTERNAL POWER ADAPTER Optional The product should only be operated using the provided power adapter and its power cord Insert the DC Plug of the external power adapter into the POWER INPUT socket of your product Make sure that the DC Plug is securely a
Download Pdf Manuals
Related Search